Professional Documents
Culture Documents
NNH4-65C-R6-V2: Electrical Specifications
NNH4-65C-R6-V2: Electrical Specifications
NNH4-65C-R6-V2: Electrical Specifications
Electrical Specifications
Frequency Band, MHz 703–803 824–894 1695–1880 1850–1990 1920–2200
Gain, dBi 15.8 16.0 17.0 17.5 17.8
Beamwidth, Horizontal, degrees 75 73 58 59 61
Beamwidth, Vertical, degrees 9.7 8.7 7.9 7.4 7.0
Beam Tilt, degrees 2– 12 2– 12 2– 12 2– 12 2– 12
USLS (First Lobe), dB 19 19 17 18 19
Front
Front--to
to--Back Ratio at 180°, dB 32 33 39 42 39
Isolation, dB 25 25 25 25 25
Isolation, Intersystem, dB 25 25 25 25 25
VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150
Input Power per Port at 50°C,
300 300 250 250 250
maximum, watts
Polarization ±45° ±45° ±45° ±45° ±45°
Impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm
* CommScope
CommScope® ® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the
whitepaper Time to Raise the Bar on BSAs.
Array Layout
page 1 of 4
February 22, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 22, 2019
NNH4-65C-R6-V2
Port Configuration
General Specifications
Operating Frequency Band 1695 – 2200 MHz | 703 – 894 MHz
page 2 of 4
February 22, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 22, 2019
NNH4-65C-R6-V2
Mechanical Specifications
RF Connector Quantity, total 12
RF Connector Quantity, low band 4
RF Connector Quantity, high band 8
RF Connector Interface 4.3-10 Female
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material Low loss circuit board
Radome Material Fiberglass, UV resistant
Reflector Material Aluminum
RF Connector Location Bottom
Wind Loading, frontal 954.0 N @ 150 km/h
214.5 lbf @ 150 km/h
Wind Loading, lateral 331.0 N @ 150 km/h
74.4 lbf @ 150 km/h
Wind Loading, maximum 1235.0 N @ 150 km/h
277.6 lbf @ 150 km/h
Wind Speed, maximum 241 km/h | 150 mph
Dimensions
Length 2438.0 mm | 96.0 in
Width 498.0 mm | 19.6 in
Depth 197.0 mm | 7.8 in
Net Weight, without mounting kit 46.3 kg | 102.1 lb
page 3 of 4
February 22, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 22, 2019
NNH4-65C-R6-V2
Packed Dimensions
Length 2620.0 mm | 103.1 in
Width 608.0 mm | 23.9 in
Depth 352.0 mm | 13.9 in
Shipping Weight 67.8 kg | 149.5 lb
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
China RoHS SJ/T 11364-2014 Above Maximum Concentration Value (MCV)
Included Products
BSAMNT--3 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top
BSAMNT
bracket set and one bottom bracket set.
BSAMNT--M — Middle Downtilt Mounting Kit for Long Antennas for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one
BSAMNT
scissor bracket set.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
page 4 of 4
February 22, 2019
©2019 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 22, 2019