Professional Documents
Culture Documents
Annual Production Plan 2021
Annual Production Plan 2021
Total quantity
ROM
OB
HG MG LG
506,068 64,762 359,361 1,371,734
930,191
Remark: Monthly ROM target is : 130 000 tons and Overburden target is 290 000 tons
In total including ROM and Overburden is come to 420 000 tons
Monthly Overburden quantity shows against the block is based on a stripping ratio for each blocks furnished in blocks model.
We can achieve the monthly target with available resources (3 excavators, 2 bulldozers, 7 Dumpers and 1 grader) but one more bulldozer if we can get will make us easy to achieved our target.
LEBAYE MEGA MINING BLOCKS LOCATION
EQUIPMENTS NEEDED
•02 Drill Rig(s)
•01 Water Browser
•01 Motopump
•01 Bulldozer with canopy protection
TB1 TB2 TB3
RB5 RA5
A2
Mine Excavation Planning for 6 months
Total quantity
ROM
OB
HG MG LG
506,068 64,762 359,361 1,371,734
930,191
Remark: Monthly ROM target is : 130 000 tons and Overburden target is 290 000 tons
In total including ROM and Overburden is come to 420 000 tons
Monthly Overburden quantity shows against the block is based on a stripping ratio for each blocks furnished in blocks model.
We can achieve the monthly target with available resources (3 excavators, 2 bulldozers, 7 Dumpers and 1 grader) but one more bulldozer if we can get will make us easy to achieved our target.
ASWAN EXPLORATION AND MINING- LEBAYE SITE (NGM)
2021 MINING PLAN
Current Features Resources available
Parameter Value Unit Availability Equipment Specification Quantity ROM Target: 130000
Distance Mine - Plant 4 km Excavator OB Target : 292000 Side Casting: 175200 60%
Distance Plant - Mine 2 km Komatsu PC 800 1 Excavator & Dumper: 116800 40%
Speed Limit 30 km/hr Komatsu PC 450 1 ADT
Average Speed 20 km/hr Caterpillar 330 1 Traveling Time required for ROM: 18 Minutes
Stripping Ratio 01:01.5 tons/m3 A. Dumper Traveling Time required for OB: 3 Minutes
OB distance 1 Km Komatsu HM 400 7 Loading and Unloading Time: 3 Minutes
Morning Shift 30 Day Bulldozer Minutes
Afternoon shift 23 Day Komatsu D 155 A 2 Total time required ROM 21 Minutes
Night Shift 15 Day Grader Total time required for OB 6 Minutes
Total Available H/D 16 Hour Komatsu GD 655 1
Dumper Capacity ROM 32 Tons 75% Fill factor
Dumper Capacity OB 33 Tons 90% Fill factor
Production
Average ROM production/Day 5200 tons
Average OB production/Day 10500 tons Side casting 6300 Excavator & Dumper: 4200
Average production hour/Day 12 Hours
PC 800 700 tons/hr 8400 Tons/days PC 450 350 Tons/hr 4200 Tons/days With 1 ADT
ADT 3 Trips/hours 32 tons/trips CAT 330 525.0 Tons/hr 6300 Tons/days Combination With Excavator
1 ADT 96 Tons/hours 1152 Tons/days TOTAL 10500 Tons/days
5 ADT 480 Tons/hours 5760 Tons/days
Conclusion
Equipment & Machinery
Excavator ADT Bulldozer Comments This planning is based on current working days.
ROM PC 800 5 0 We can reduce the number of equipment by increasing the working hour.
OB PC 450 1 0
Side Casting CAT 330 0 1
Debushing 0 0 1 With Chain Saw operators
Remark: Out of 7 ADT we have consider 06 ADT only , if 07 ADT are available will we use 2 ADT on overburden and maintain the remain 05 ADT on ROM.
ROM Pad 2
ROM Pad 1
Mine Access
point
Bridge
January 2021
February 2021
February 2021 2
3
March 2021
4
April 2021
April 2021
May 2021
6
June 2021
July 2021
July 2021
August 2021
GREASING SCHEDULE :MONTHLY 2021
Mine Production
Month HG MG LG Total OB Stripping Ratio
Jan-21 77,290 7,816 37,810 122,916 153,242 1.25
Feb-21 105,841 10,087 58,772 174,701 230,735 1.32 1.3207417717
Mar-21 87,339 25,043 71,201 183,583 216,308 1.18 1.1782565588
Apr-21 76,402 6,979 56,512 139,894 228,008 1.63 1.6298659296
May-21 56,674 4,728 38,613 100,015 172,197 1.72 1.7217029727
Jun-21 67,018 7,558 76,589 151,165 214,948 1.42 1.4219375792
Jul-21 112,793 10,366 57,674 180,833 309,539 1.71 1.7117398438
Aug-21 81,812 38,167 38,167 158,147 235,638 1.49
Sep-21 75,784 35,770 35,770 147,323 219,511 1.49
Oct-21 81,490 36,962 36,962 155,414 231,567 1.49
Nov-21 80,028 36,936 36,936 153,900 229,311 1.49
Dec-21 75,981 33,926 33,926 143,834 214,312 1.49
1,811,725 2,655,316 1.47
Description Quantity Unit Comment MPT Figures on the belts (This might have changed >
parameters changed)
Plant 2 has been designed for throughoutput 150 TPH Lumpy forms approximately 19% and Fines approximately 23%
Actual product (Fines & Lumpy, 6.3mm & 75mm) 91.5 TPH Fines(TPH) 25 15170
Maintenance is scheduled one day/week(4xmonth) 32 HRS Lumpy(TPH) 15 9102
Inspection hours allowed/ month (Operational Down Planned Inspection & intermittent lubrication and greasing
Times)
20 HRS 24272
Working hours per day 24 HRS
Working hours per month 732 HRS
Plant availability hours per month 606.8 HRS
Avarage available days per month 30.5 DAY
Production per month 55522.2 TONNES
Production per day 1820.4 TONNES
Plant Breakdown Estimate (@ 10% per month) 73.2
Utilization 96%
Bottle necks to production output: Feeding system, vibration screens, conveyor belts (oversize discharge belts), maintenance skills set, and
availability of spares/material.
Tentative timeline
Sl. No. Improvement Projects/Tasks Start Finish
1 Installation of Double Deck screen
2 Installation of Degrit screen
3 Impact bed on O/S conveyor
4 Primary & Secondary Scrappers on Conveyors
5 Bucket Crusher Feed
6 Ground Hopper & Permanent Crusher/Mobile Crusher (If required)
7 Stabilising Thickner
8 Standby Pumps (Slurry, Fresh water, TSF) Installation
9 Surface Drainage plan
10 Water Balancing & Plant-1 Operation
11 Belt Scale
12 Alternate for Push feeder (Sl. No. 6)
13 Flocculant dosing system
14 Degrit Improvement
15 Off Grade fines (Salvation Plan)
Description Quantity Unit Comment
Plant 2 has been designed for throughoutput 60 TPH Lumpy forms approximately 19% and Fines approximately 23%
Actual product (Fines & Lumpy, 6.3mm & 75mm) 36.6 TPH
Maintenance is scheduled one day/week(4xmonth) 32 HRS
Inspection hours allowed/ month (Operational Down 20 HRS Planned Inspection & intermittent lubrication and greasing
Times)
Working hours per day 24 HRS
Working hours per month 732 HRS
Plant availability hours per month 606.8 HRS
Avarage available days per month 30.5 DAY
Production per month 22208.88 TONNES
Production per day 728.16 TONNES
Plant Breakdown Estimate (@ 10% per month) 73.2
Utilization 96%
Bottle necks to production output: Feeding system, unavailability of a crusher, scrubber drive system, vibration screen design, conveyor belts review
, maintenance skills set, and availability of spares/material.
Plant 1
Plant Actual
Daily Inspection Improvements
Month Days hours Maintenance hours Availability Utilisation % Feed Rate Feed Tonnage Recovery% Lumps% Fines% Product Lumps Fines Remarks
hours %
Jan-21 31 16 14 0 96% 93 50 33,224 31 45 55 10,300 4,635 5,665
Feb-21 28 14 14 0 96% 93 50 29,946 35 45 55 10,481 4,716 5,765 Bucket Crusher in operation
Mar-21 31 16 41 16 90% 93 60 37,470 40 45 55 14,988 6,745 8,243
Apr-21 30 15 23 0 95% 93 60 38,056 42 45 55 15,983 7,193 8,791
May-21 31 16 14 0 96% 93 60 39,869 42 45 55 16,745 7,535 9,210 Installation of DD screen
Jun-21 30 15 53 0 91% 95 65 40,261 42 45 55 16,910 7,609 9,300
Jul-21 31 16 14 0 96% 95 65 44,120 42 45 55 18,531 8,339 10,192
Aug-21 31 16 14 0 96% 95 65 44,120 42 45 55 18,531 8,339 10,192
Sep-21 30 15 37 0 93% 93 65 40,381 42 45 55 16,960 7,632 9,328
Oct-21 31 16 14 0 96% 93 70 46,514 42 45 55 19,536 8,791 10,745
Nov-21 30 15 14 0 96% 93 70 44,984 42 45 55 18,893 8,502 10,391
Dec-21 31 16 45 0 92% 95 70 45,453 42 45 55 19,090 8,591 10,500 Major O/H
484,398 196,947 88,626 108,321
37570
39944
51641 37570 39944 51641 57367
57367
61610
60002
67655
66219
60812
66831
66366
63690
61610 60002 67655 66219 60812 66831 66366 63690 699708
Duration Resource LOCA LEAD
Plant TASK (hours) (Manpower) Frequency Performed by Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec L INT TIME
Liners 0 Boilermaker Consider VRN/Benox instead of vesconite
3monthly 0 0 0 0 X
Refurbish Feedbin 12 Boilermaker Consider visual inspection & refurbish only when it requires
Annually 12 X
Grizzly 0 Boilermaker Consider visual inspection & replace only when it requires, Spare Grizzly to be made ready
3monthly 0 0 0 0 X
Push Feeder Table and Seals 8 Fitter/Boilermaker Consider replacing & refurbishing the replaced one, seals can be evaluated weekly & changed
3monthly 8 0 8 8 X
Plant#2 Feedbin
Push Feeder Liners 4 Boilermaker Consider weekly inspection to monitor deterioration rate
Bi-monthly 4 4 0 4 4 4 X
Overlap lip (feed bin - concrete wall) 4 Boilermaker weekly inspection & repairs and repairs if theres wear
Weekly 4 4 0 4 4 0 4 4 0 4 4 0 X
Illumination around the feedbin 0 Electrician Ensure the lamp structure is always firm, and the lamp is always functional with a day light switch
Daily 0 0 0 0 0 0 0 0 0 0 0 0 X
Feedbin water sprayers 1 Boilermaker/Fitter Ensure structure is not clogged, damaged, or misaligned
Weekly 1 1 0 1 1 0 1 1 0 1 1 0 X
Push feeder frame & infrastructure 16
Annually Boilermaker/Fitter 16 X Inspect the structure condition, and repair any defects
Hydraulic External Gear/Vane Pump 4
Annually Fitter 4 X Follow OEM maintenance manual
Motor- Pump Coupling GC48 0
Annually Fitter 0 X Follow OEM maintenance manual
22kW Motor 0
Annually Fitter/Electrician 0 X Evaluate & maintain accordingly & replace when necessary to do so
Pilot Operated Pressure Relief Valve 0
Annually Fitter 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Throttle Check Valve 0
Annually Fitter 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Flow Control Valves 0
Annually Fitter 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Check Valve 0
Annually Fitter 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Directional Control Valve 0
Annually Fitter 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Return Filter Element 0.5
3monthly Fitter 0.5 0 0.5 0.5 X Replace as per number of hours confirmed by OEM Manual
Return Filter Assembly 0
6monthly Fitter 0 0 X Replace as per number of hours confirmed by OEM Manual
Suction Filter 0.5
3monthly Fitter 0.5 0 0.5 0.5 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Suction Strainer 0
3monthly Fitter 0 0 0 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Radiator motor 0.5
3monthly Electrician 0.5 0 0.5 0.5 X Electrician to ensure inspection of the motor including electrical tests
Radiator (Oil Cooler) 1
6monthly Fitter 0 1 X Maintain as per OEM Manual specification (Including cleaning of the radiator to curb clogging)
Solenoids valves 0.5
6monthly Fitter 0 0.5 X Evaluate functionality by testing & if mulfuctioning replace accordingly
PLC Module Cable 4
6monthly Electrician 0 4 X Evaluate functionality by testing & if mulfuctioning replace accordingly
PLC Module 0
6monthly Electrician 0 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Plant#2 Push Feeder
Proximity Sensor 24V DC 0
Daily Electrician 0 0 0 0 0 0 0 0 0 0 0 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Power Contactor 63A 1
3monthly Electrician 1 0 1 1 X X Evaluate functionality by testing & if mulfuctioning replace accordingly
Power Contactor 20A 0
3monthly Electrician 0 0 0 0 X X Evaluate functionality by testing & if mulfuctioning replace accordingly
MCCB 63A 4Pole 1
6monthly Electrician 0 1 X X Evaluate functionality by testing & if mulfuctioning replace accordingly
24V Relay 0
6monthly Electrician 0 0 X X Evaluate functionality by testing & if mulfuctioning replace accordingly
Float Switch 0
6monthly Electrician 0 0 X X Evaluate functionality by testing & if mulfuctioning replace accordingly
Temperature Gauge/Thermostart 0
6monthly Electrician 0 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
MPCB 3Pole 63A 0
6monthly Electrician 0 0 X X Evaluate functionality by testing & if mulfuctioning replace accordingly
Solenoid coil for directional control valve 0
coil 24V DC 6monthly Electrician 0 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Air Breather FSB 60HN 0
6monthly Fitter 0 0 X Evaluate functionality by testing & if mulfuctioning replace accordingly
Pushing Cylinder 4
Monthly Fitter 4 0 4 4 X X Evaluate, and replace seals or whole assembly if needed
Hydraulic Cylinder Clevis Pin (120mm x 0
Fitter/Boilermaker
dia 40mm) Monthly 0 0 0 0 X X Evaluate deterioration & replace when needed
Hydraulic Cylinder Clevis Pin (200mm x 0
Fitter/Boilermaker
dia 40mm) Monthly 0 0 0 0 X X Evaluate deterioration & replace when needed
Hydraulic Oil Azolla VG68 (210L) 0
Monthly Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X Evaluate deterioration & leaks & replace only when necessary
Hydraulic Steel Pipes 0
Fitter/Boilermaker
6monthly 0 0 X Evaluate viscocity & contamination and replace when needed
Hydraulic power pack 0 Engineer
housing/enclosure/tank Annually (Mechanical/Electrical) 0 Inspection of corrosion & the structure condition
Electrical control circuit (MCCB, Contactor 1 Engineer(Electrical)/Electricia
C1-C4, CT, Isolator Switch, Inverter- monthly n 1 1 1 1 1 0 1 1 1 1 1 1 X Inspection and test & rectify any defects
EDR120-24,
Pressure GaugePLC Module) 0
Annually Fitter 0 Inspect the pressure gauge for defects & replace if malfuctioning
Scrubber support sheave wheels 0 Fitter/Boilermaker
Weekly 0 0 0 0 X Reference temperature taken, and variance checked to ensure greasing promptly
NDT on girth gear teeth and pinion teeth 1 Engineer/vendor/contractor
Annually 1 X Mechanical Engineer with NDT contractor to inspect & conduct NDT
Conduct Vibration Analysis 0 Engineer/vendor/contractor
Annually 0 X X Mechanical Engineer with NDT contractor to inspect & conduct NDT
Drive alignment check & Correction 4 Engineer/vendor/contractor
Annually 4 X X Mechanical Engineer with NDT contractor to inspect & conduct NDT
Shell Journal 0 Engineer/vendor/contractor
Annually 0 X Mechanical Engineer with NDT contractor to inspect & conduct NDT
Journal Trust Plates 0 Engineer/vendor/contractor
3monthly 0 0 0 0 X Mechanical Engineer with NDT contractor to inspect & conduct NDT
Gearbox 0
Annually Engineer/ Fitter 0 X Gearbox inspection & lubrication
Machined Adaptor Bracket. 0
3monthly Boilermaker/Fitter 0 0 0 0 X X Inspect the condition structure on the bracket
Motor Shaft Couplings. 0
3monthly Fitter 0 0 0 0 X Inspect the coupling for wear and tear & replace when defects are identified
High Torque Spider Coupling. 0
3monthly Fitter 0 0 0 0 X Inspect the coupling for wear and tear & replace when defects are identified
Electric Drive motor 0 Electrical Engineer/Electrician
3monthly 0 0 0 0 X Do motor test & lubricate the motor as per OEM manual
Pinion 0
Annually Fitter 0 X Inspect normal wear & tear
Pinion Mounting Flange 0
3monthly Fitter 0 0 0 0 X Inspect normal wear & tear
Vesconite Bearings 0
3monthly Fitter 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Machined Shell 8
Annually Fitter/ Boilermaker 8 X Inspect for normal wear & tear replace when defects are identified
Girth Gear 0 Mechanical Engineer/Fitter
Plant#2 Scrubber
Annually 0 X Inspect for normal wear & tear replace when defects are identified
Flinger Ring 0
3monthly Fitter 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Inlet Cone 0
3monthly Boilermaker/Fitter 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Journal Thrust Rings 0
3monthly Mechanical Engineer/Fitter 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Lifter Bars 8
3monthly Boilermaker 8 8 8 8 X Inspect for normal wear & replace when defects are identified
Shell Plates 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Protection Ring 0
3monthly Boilermaker/Fitter 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Dropforged bolts 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Grommets 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Cup washers 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Feed pipes 0
3monthly Fitter/Boilermaker 0 0 0 0 X X Inspect for wear, blockages, and maintain accordingly
Spray-bar 0
3monthly Boilermaker/Fitter 0 0 0 0 X X Inspect for wear, blockages, and maintain accordingly
Spray nozzle 0
3monthly Fitter 0 0 0 0 X X Inspect for wear, blockages, and maintain accordingly
Lip Liners 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Discharge Wear Liners 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Lubricating Oil 0
3monthly Fitter 0 0 0 0 X X Inspect the condition of lubricant, fill or replace as per identified defects
Liners 4
Plant#2 Trommel monthly Boilermaker 4 4 0 4 4 0 4 4 0 4 4 0 X X Inspect for normal wear & tear, and replace when defects are identified
Discharge Chute
Plant#2 Trommel
Discharge Chute Chute 0
Annually Boilermaker 0 X Inspect for normal wear & tear, and replace when defects are identified
Liners 0
Plant#2 Oversize monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X Inspect for normal wear & tear, and replace when defects are identified
Discharge Chute Chute 0
Annually Boilermaker 0 X X Inspect for normal wear & tear, and replace when defects are identified
Vibrator Springs x 8 2
6monthly Fitter 2 2 X Inspect for flexibility, and replace when normal condition have changed
Top Deck Panels 1 Inspect for aparture gaps with a vernier,and replace when the sizes have changed
monthly Process/Metullargy 1 1 1 1 1 1 1 1 1 1 1 1 X
Bottom Deck Panels 1 Inspect for aparture gaps with a vernier,and replace when the sizes have changed
monthly Process/Metullargy 1 1 1 1 1 1 1 1 1 1 1 1 X
Plant#2 Double Deck Liners 2
Screen monthly Boilermaker 2 2 2 2 2 2 2 2 2 2 2 2 X X Inspect for normal wear & tear, and replace when defects are identified
Trommel Screen Water Sprayers 1
Weekly Fitter 1 1 X Inspect for wear, blockages, and maintain accordingly
Vibrating Motor 1
Annually Electrician/Fitter/Rigger 1 X Inspect for normal wear, do motor test, and lubricate as per OEM manual
Membrane Support Structure 4 Boilermaker & Process
Refurbishment 6monthly 4 4 X X Inspect for normal wear & tear, and replace when defects are identified
Vibrator Springs x 8 2
6monthly Fitter/Rigger 2 2 X Inspect for flexibility, and replace when normal condition have changed
Panels 1 Inspect for aparture gaps with a vernier,and replace when the sizes have changed
monthly Process/Metullargy 1 1 1 1 1 1 1 1 1 1 1 1 X
Liners 1
Plant#2 DEGRIT monthly Boilermaker 1 1 1 1 1 1 1 1 1 1 1 1 X X Inspect for normal wear & tear, and replace when defects are identified
SCREEN Degrit Screen Water Sprayers 1
6monthly Fitter 1 1 X Inspect for wear, blockages, and maintain accordingly
Vibrating Motors 1
Annually Electrician/Fitter/Rigger 1 X Inspect for normal wear, do motor test, and lubricate as per OEM manual
Membrane Support Structure 4
Refurbishment 6monthly Boilermaker & Process 4 4 X X Inspect for normal wear & tear, and replace when defects are identified
Fixed Jaw 0
Annually Fitter 0 X Inspect for normal wear & tear, and replace when defects are identified
Swing Jaw 0
Annually Fitter 0 X Inspect for normal wear & tear, and replace when defects are identified
Fly wheel 2
Plant#2 JAW Annually Fitter 2 X Inspect for normal wear & tear, and replace when defects are identified
CRUSHER Pitman Bearing 1
6monthly Fitter 1 1 X Inspect for normal wear & tear, and replace when defects are identified
Toggle Plate 0
Annually Fitter 0 X Inspect for normal wear & tear, and replace when defects are identified
Shear bolts 1
3monthly Boilermaker/Fitter 1 1 1 1 X Inspect for normal wear & tear, and replace when defects are identified
Liners 2
Plant#2 Jaw Crusher monthly Boilermaker 2 2 2 2 2 0 2 2 2 2 2 2 X X Inspect for normal wear & tear, and replace when defects are identified
Feed Chute Refurbish Chute 0
Annually Boilermaker 0 X X Inspect for normal wear & tear, and replace when defects are identified
Liners 2
Plant#2 Screen monthly Boilermaker 2 2 2 2 2 0 2 2 2 2 2 2 X X Inspect for normal wear & tear, and replace when defects are identified
Discharge Chute Refurbish Chute 0
Annually Boilermaker 0 X X Inspect for normal wear & tear, and replace when defects are identified
Conveyor belt 4
3monthly Splicer/Fitter 4 4 4 4 X Inspect belt for wear & tear, splice conditions
Gearbox 0
Annually Fitter 0 X Inspect for normal wear & tear, and lubricate
Electric Motor 0
Annually Electrician & Rigger 0 X Inspect motor for wear, motor test, and lubricate
Idlers 0
Annually Fitter 0 X Inspect & replace worn out idlers
Return Rollers 0
monthly Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X Inspect & replace worn out idlers
Plant#2 Oversize Belt Scrappers 0 Inspect for normal wear & tear, adjust, and if scrapper tyre is worn, replace
Conveyor monthly Fitter & Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X
Head pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter, Boilermaker, & Rigger 1 1 1 1 1 1 1 1 1 1 1 1 X X
Tail pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Re-lag pulleys 0
Annually Splicer/Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X X Inspect belt for wear & tear, and relag as per requirements
Discharge chute liners 0 Inspect for normal wear & tear
monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X
Refurbish discharge chute 0 Inspect for normal wear & tear
monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X
Conveyor belt 4
3monthly Splicer/Fitter 4 4 4 4 X Inspect belt for wear & tear, splice conditions
Gearbox 0
Annually Fitter 0 X Inspect for normal wear & tear, and lubricate
Plant#2 Lumpy
Conveyor
Electric Motor 0
Annually Electrician & Rigger 0 X Inspect motor for wear, motor test, and lubricate
Troughing idlers 0
Annually Fitter 0 X Inspect & replace worn out idlers
Return Rollers 0
monthly Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X Inspect & replace worn out idlers
Plant#2 Lumpy Belt Scrappers 0 Inspect for normal wear & tear, adjust, and if scrapper tyre is worn, replace
Conveyor monthly Fitter & Boilermaker 0 X
Head pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Tail pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Re-lag pulleys 0
monthly Splicer/Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X X Inspect belt for wear & tear, and relag as per requirements
Discharge chute liners 0 Inspect for normal wear & tear
monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X
Refurbish discharge chute 0 Inspect for normal wear & tear
monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X
Conveyor belt 4
3monthly Splicer/Fitter 4 4 4 4 X Inspect belt for wear & tear, splice conditions
Gearbox 0
Annually Fitter 0 X Inspect for normal wear & tear, and lubricate
Electric Motor 0
Annually Electrician & Rigger 0 X Inspect motor for wear, motor test, and lubricate
Troughing idlers 0
Annually Fitter 0 X Inspect & replace worn out idlers
Return Rollers 0
monthly Fitter 0 X Inspect & replace worn out idlers
Plant#2 Jaw Crusher Belt Scrappers 0 Inspect for normal wear & tear, adjust, and if scrapper tyre is worn, replace
Conveyor monthly Fitter & Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X
Head pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Tail pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Re-lag pulleys 0
monthly Splicer/Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X X Inspect belt for wear & tear, and relag as per requirements
Discharge chute liners 0 Inspect for normal wear & tear
monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X
Refurbish discharge chute 0 Inspect for normal wear & tear
monthly Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X X
Conveyor belt 4
3monthly Splicer/Fitter 4 4 4 4 X Inspect belt for wear & tear, splice conditions
Gearbox 0
Annually Fitter 0 X Inspect for normal wear & tear, and lubricate
Electric Motor 0
Annually Electrician & Rigger 0 X Inspect motor for wear, motor test, and lubricate
Troughing idlers 0
Annually Fitter 0 X Inspect & replace worn out idlers
Plant#2 Fines Return Rollers 0
Conveyor monthly Fitter 0 X Inspect & replace worn out idlers
Belt Scrappers 0 Inspect for normal wear & tear, adjust, and if scrapper tyre is worn, replace
monthly Fitter & Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X
Head pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Tail pulley bearings 1 Inspect for normal wear & tear, alignment, and greasing
monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X X
Re-lag pulleys 0
monthly Splicer/Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X X Inspect belt for wear & tear, and relag as per requirements
Gland packings 1 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 1 1 0 0 X
Replace V Belts 1 Inspect for normal wear & tear replace if worn out
3monthly Fitter 1 1 0 0 X X
Bearing Assembly 2 Inspect for alignment, greasing, and normal wear & tear
Plant#2 8/6 Annually Fitter 2 X
Buccaneer Slurry
Pump Dewatering Overhaul Pump (Liners, Impeller, throat 0 Inspect for alignment, greasing, and normal wear & tear
bush) Annually Fitter 0 X
Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
HDPE pipes & Flanges (dia 160mm) 0 Inspect for normal wear & tear
Annually HDPE welder/Fitter 0 X
Replace gland packings 1 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 1 1 0 0 X
Replace V Belts 1 Inspect for normal wear & tear replace if worn out
3monthly Fitter 1 1 0 0 X X
Bearing Assembly 2 Inspect for alignment, greasing, and normal wear & tear
Plant#2 8/6 Annually Fitter 2 X
Buccaneer Slurry
Pump Process Water Overhaul Pump (Liners, Impeller, throat 0 Inspect for alignment, greasing, and normal wear & tear
bush) Annually Fitter 0 X
Plant#2 8/6
Buccaneer Slurry
Pump Process Water
Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
HDPE pipes & Flanges ( dia 160mm) 0 Inspect for normal wear & tear
Annually HDPE welder/Fitter 0 X
Replace gland packings 1 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 1 1 0 0 X
Replace V Belts 1 Inspect for normal wear & tear replace if worn out
3monthly Fitter 1 1 0 0 X X
Bearing Assembly 2 Inspect for alignment, greasing, and normal wear & tear
Annually Fitter 2 X
Plant#2 4/3
Overhaul Pump (Liners, Impeller, throat 0 Inspect for alignment, greasing, and normal wear & tear
Buccaneer Slurry
Pump Underflow bush) Annually Fitter 0 X
Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
HDPE pipes & Flanges ( dia 160mm) 0 Inspect for normal wear & tear
Annually HDPE welder/Fitter 0 X
Greasing & Lubrication 1 As per OEM requirements/ condition monitoring schedule
Weekly Fitter 1 1 1 1 1 1 0 0 0 0 0 0 X X X
Replace gland packings 0 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 0 0 0 0 X
Coupling 0 Inspect for normal wear & tear replace if worn out
3monthly Fitter 0 0 0 0 X
Overhaul Pump 0 Inspect for alignment, greasing, and normal wear & tear
Plant#2 Catchment Annually Fitter 0 X
Pump; 37kW Braybar
pumps CPHM 80/26 Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
HDPE pipes & Flanges 0 Inspect for normal wear & tear
Annually HDPE welder/Fitter 0 X
Greasing & Lubrication 0 As per OEM requirements/ condition monitoring schedule
Weekly Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X X X
Replace gland packings 0 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 0 0 0 0 X
Coupling 0 Inspect for normal wear & tear replace if worn out
3monthly Fitter 0 0 0 0 X
Overhaul Pump 0 Inspect for alignment, greasing, and normal wear & tear
Annually Fitter 0 X
Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
Plant#2 TSF Pump;
90kW Braybar pumps HDPE pipes & Flanges 0 Inspect for normal wear & tear
CPHM 100/32 6monthly HDPE Welder/Fitter 0 0 X
Steel pipe reducer 0 As per OEM requirements/ condition monitoring schedule
6monthly Boilermaker 0 0 X
Foot Valve & Other Valves 0 Inspect for normal wear & tear
6monthly Fitter 0 0 X
Gate Valves 0 Inspect for normal wear & tear
6monthly Fitter 0 0 X
Greasing & Lubrication 0 As per OEM requirements/ condition monitoring schedule
Weekly Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X X X
Screw feeder outlet 0 Check for the build up and clean, & check water tulip formation, condition monitoring
Daily Process /Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Filters and air dryer 0 Inspect for normal wear & tear replace if worn out, Inspect for condensation
Daily Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Gearbox and Electrical motor 0 Condition monitoring on both gearbox & motor, including lubrication & motor tests
Plant#2 Flocculant Daily Fitter & Electrician 0 0 0 0 0 0 0 0 0 0 0 0 X
System Feeder assembly 0 Inspect the condition of the surface
Weekly Fitter/Boilermaker 0 0 0 0 0 0 0 0 0 0 0 0 X
Feed bin 0 Inspect it for reagent build-up
Monthly Process 0 0 0 0 0 0 0 0 0 0 0 0 X
Load cells 0 Inspect calibration with empty bin and lid in position
Monthly Electirician/Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Thickener Assembly 0 Inspect the safety system and bolts.
Daily Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Tank Assembly 0 Check for leaks on tank, pipes or pumps.
Daily Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Drive Assembly 0 Inspect oil level in hydraulic pack,Inspec for any oil leaks on pack and cylinder, Inspect obstruct
Daily Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Vesconite sliders 0 Remove dirt & any foreign particles
Plant#2 Thickener
Weekly Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Limit switches 0 Inspect for correct functionality
Monthly Electrician & Fitter 0 0 0 0 0 0 0 0 0 0 0 0 X
Hydraulic tank 1 vesconite sliders
Monthly Fitter 1 1 1 1 1 1 1 1 1 1 1 1 X
Rake Assembly 6 Inspect for wear on rake tips and ensure they are replaced.
Annually Fitter 6 X
Wier mineral cyclone internal lining 0 Inspect the safety system and bolts.
Daily Process 0 0 0 0 0 0 0 0 0 0 0 0 X
Plant#2 Cyclones
MPT /Multotec small CR3 Cyclone 0 Check for leaks on tank, pipes or pumps.
Daily Process 0 0 0 0 0 0 0 0 0 0 0 0 X
0
Daily Process 0 0 0 0 0 0 0 0 0 0 0 0 X
Plant#2 MCC
0
Daily Process 0 0 0 0 0 0 0 0 0 0 0 0 X
30 34 66.5 60 30 90 29 33 59.5 33 29 92
Resource LEAD
Plant TASK Duration (hours) (Manpower) Frequency Performed by Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec LOCALINT TIME
Liners 8 Consider VRN/Benox instead of vesconite
Boilermaker
3monthly 8 0 8 8 X
Refurbish Feedbin 16 Consider visual inspection & refurbish only when it requires
Plant#1 Feedbin Boilermaker
Annually 16 X
Grizzly 4 Consider visual inspection & replace only when it requires
Boilermaker
3monthly 0 0 0 0 X
Drive alignment check & Correction 4
Engineer/vendor/contractor
Annually 4 X X Mechanical Engineer with NDT contractor to inspect & conduct NDT
Gearbox 0
Annually Engineer/ Fitter 0 X Gearbox inspection & lubrication
Motor Shaft Couplings. 0
3monthly Fitter 0 0 0 0 X Inspect the coupling for wear and tear & replace when defects are identified
Electric Drive motor 0
Electrical Engineer/Electrician
3monthly 0 0 0 0 X Do motor test & lubricate the motor as per OEM manual
Inlet Cone 0
3monthly Boilermaker/Fitter 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Lifter Bars 8
3monthly Boilermaker 8 8 8 8 X Inspect for normal wear & replace when defects are identified
Shell Plates 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Dropforged bolts 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Plant#1 Scrubber
Grommets 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Cup washers 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Feed pipes 0
3monthly Fitter/Boilermaker 0 0 0 0 X X Inspect for wear, blockages, and maintain accordingly
Spray-bar 0
3monthly Boilermaker/Fitter 0 0 0 0 X X Inspect for wear, blockages, and maintain accordingly
Spray nozzle 0
3monthly Fitter 0 0 0 0 X X Inspect for wear, blockages, and maintain accordingly
Lip Liners 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Discharge Wear Liners 0
3monthly Boilermaker 0 0 0 0 X Inspect for normal wear & tear replace when defects are identified
Lubricating Oil 0
3monthly Fitter 0 0 0 0 X X Inspect the condition of lubricant, fill or replace as per identified defects
Chute 0
Annually Boilermaker 0 X Inspect for normal wear & tear, and replace when defects are identified
Plant#1 Trommel
Gearbox 0
Annually Engineer/ Fitter 0 X Gearbox inspection & lubrication
Vibrator Springs x 8 4
6monthly Fitter 4 4 X Inspect for flexibility, and replace when normal condition have changed
Liners 0
3monthly Boilermaker 0 0 0 0 X X Inspect for normal wear & tear, and replace when defects are identified
Plant#1 Double Deck Screen Water Sprayers 0
Screen 6monthly Fitter 0 0 0 X Inspect for wear, blockages, and maintain accordingly
Vibrating Motor 1
Annually Electrician/Fitter/Rigger 1 X Inspect for normal wear, do motor test, and lubricate as per OEM manual
Membrane Support Structure Refurbishment 4
Boilermaker & Process
6monthly 4 4 X X Inspect for normal wear & tear, and replace when defects are identified
Liners 2
Plant#1 Screen 3monthly Boilermaker 2 2 2 2 X X Inspect for normal wear & tear, and replace when defects are identified
Discharge Chute Refurbish Chute 0
Annually Boilermaker 0 X X Inspect for normal wear & tear, and replace when defects are identified
Conveyor belt 4
3monthly Splicer/Fitter 4 4 4 4 X Inspect belt for wear & tear, splice conditions
Gearbox 0
Plant#1 Lumpy Annually Fitter 0 X Inspect for normal wear & tear, and lubricate
Conveyor Electric Motor 0
Annually Electrician & Rigger 0 X Inspect motor for wear, motor test, and lubricate
Idlers 0
Annually Fitter 0 X Inspect & replace worn out idlers
Conveyor belt 4
3monthly Splicer/Fitter 4 4 4 4 X Inspect belt for wear & tear, splice conditions
Gearbox 0
Plant#1 Fines Annually Fitter 0 X Inspect for normal wear & tear, and lubricate
Conveyor Electric Motor 0
Annually Electrician & Rigger 0 X Inspect motor for wear, motor test, and lubricate
Troughing idlers 0
Annually Fitter 0 X Inspect & replace worn out idlers
Gland packings 1 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 1 0 0 0 X
Plant#1 6/4 DD
Screen Underflow
pump
Replace V Belts 1 Inspect for normal wear & tear replace if worn out
3monthly Fitter 1 0 0 0 X X
Bearing Assembly 2 Inspect for alignment, greasing, and normal wear & tear
Plant#1 6/4 DD Annually Fitter 2 X
Screen Underflow
pump Overhaul Pump (Liners, Impeller, throat bush) 0 Inspect for alignment, greasing, and normal wear & tear
Annually Fitter 0 X
Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
HDPE pipes & Flanges (dia 160mm) 0 Inspect for normal wear & tear
Annually HDPE welder/Fitter 0 X
Replace gland packings 1 Inspect for leakage flow rate,adjust/ replace as per condition
3monthly Fitter 1 0 0 0 X
Replace V Belts 1 Inspect for normal wear & tear replace if worn out
3monthly Fitter 1 0 0 0 X X
Plant#1 6/4
Bearing Assembly 2
Fitter Inspect for alignment, greasing, and normal wear & tear
Annually 2 X
Underflow booster
pump Overhaul Pump (Liners, Impeller, throat bush) 0 Inspect for alignment, greasing, and normal wear & tear
Annually Fitter 0 X
Electric Motor 0 Inspect for normal wear & tear, lubricate, and do motor test
Annually Electrician 0 X
HDPE pipes & Flanges ( dia 160mm) 0 Inspect for normal wear & tear
Annually HDPE welder/Fitter 0 X
ESTIMATE CONSUMPTION FOR ALL DEPARTMENT
(12 MONTHS) - BASED ON 2020 CONSUMPTION
Siphon d’évier de cuisine à 2 bacs avec trop plein piece 100 PROJECT
PLUNGER,DETENT 24 EXPLORATION
LATCH, HQ 24 EXPLORATION
GEOLOGY
TRANSPORT ENGIN PELLE SUR SITE (FRANCEVILLE/OKONDJA) 24
PELLE A CHENILLE LONKING 24 GEOLOGY
HQ SPANNEL 16 GEOLOGIE
BUSHING 80 GEOLOGIE
ROD(HQ3) 40 GEOLOGIE
Gant PVC (rouge) 100 HSE
Gant latex jetable 500 HSE
Gant latex menage (long) 100 HSE
Gant de manutention lourd 200 HSE
Gant de travaux electriques (singer) 100 HSE
Gant de préhension (singer) 400 HSE
Gant de soudure 100 HSE
Capuche de soudure 10 HSE
Paire de guêtres de soudure 10 HSE
Manchettes de soudure 10 HSE
Tablier en cuire 10 HSE
Veste de soudure (en cuire) 10 HSE
Visiere de protection 10 HSE
Cagoule de soudure 10 HSE
LABORATORY
TESTWORK ON LEBAYE Mn Fines-upgrading MAK ANALYTICAL 2
SAMPLE PRERATION AND MEASUREMENT OKONDJA LABORATORY
PLANT,LABORATORY AND LOAYOUT 2
TETRASODIUM PYROPHOSPHATE KG 72 LABORATOIRE
39791 DUST MASK FFP3 + VALVE 5000 LABORATORY
HYDROCHLORHYDRIC ACID L 60 LABORATORY
ACETONE,1L 40 LABORATORY
3 PHASE INDUCTOR MOTOR,FRAME MS 100L-6 1.5W HP 2 RPM 945 V 220/380 A 7.00/4 3 LABARATORY
URETHANE INSERT 12 LABARATORY
CARTOUCHE MASQUE RESPIRATOIRE 124 LABORATORY
4 MINE
Vis d'arrêt du piston de retrait du volant moteur pour Stihl 070
Support carter cylindre pour tronçonneuse Stihl 070 4 MINE
HIGHLIGHTERS 20 WAREHOUSE
STAPPLE PINS#0246 20 WAREHOUSE
STAPPLE PINS#246 20 WAREHOUSE
TABLE RULERS 20 WAREHOUSE
PAPER CLIPS 20 WAREHOUSE
MULTICOLOUR DOCUMENT FOLDERS 500 WAREHOUSE
IN AND OUT TRAYS-1 STAIR 20 WAREHOUSE
93101-22067 20 WAREHOUSE
ESSENCE 72 WAREHOUSE
SEAL 60 WORK SHOP
WORKSHOP
TOLERIE ET PEINTURE POUR CAMION MERCEDES ACTROS OKM17 60
SEAL 60 WORKSHOP
O-RING 60 WORKSHOP
PLATE 60 WORKSHOP
SEAL 60 WORKSHOP
O-RING 60 WORKSHOP
O-RING 60 WORKSHOP
O-RING 60 WORKSHOP
CASE 60 WORKSHOP
O-RING 60 WORKSHOP
SPACER 60 WORKSHOP
SEAL 60 WORKSHOP
ADAPTER 60 WORKSHOP
AXE 60 WORKSHOP
AXE 60 WORKSHOP
AXE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
CONNECTION A 60 WORKSHOP
GASKET-HOU 60 WORKSHOP
COURROIE 60 WORKSHOP
ALTERNATEUR 60 WORKSHOP
DEMARREUR 60 WORKSHOP
ELEMENT 60 WORKSHOP
FILTRE 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
REGULATOR 60 WORKSHOP
DEMARREUR 60 WORKSHOP
ALTERNATEUR 60 WORKSHOP
BELT 60 WORKSHOP
ELEMENT 60 WORKSHOP
FILTRE 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
SUPPORT 60 WORKSHOP
AXE 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
AXE 60 WORKSHOP
VIS 60 WORKSHOP
SEAL-LINKAGE 60 WORKSHOP
PN-YM 60 WORKSHOP
PIN-YM 60 WORKSHOP
Demarreur 60 WORKSHOP
Alternateur 60 WORKSHOP
Thermostart 60 WORKSHOP
CONNECTOR 60 WORKSHOP
TUBE 60 WORKSHOP
TUBE 60 WORKSHOP
HOSE 60 WORKSHOP
ELBOW 60 WORKSHOP
O-RING 60 WORKSHOP
TOOTH 60 WORKSHOP
SEAL 60 WORKSHOP
SEAL 60 WORKSHOP
O-RING 60 WORKSHOP
O-RING 60 WORKSHOP
BUSHING 60 WORKSHOP
BUSHING 60 WORKSHOP
Demarreur 60 WORKSHOP
Alternateur 60 WORKSHOP
Thermostart 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Filter 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
Filter 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Element 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Element 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
O-ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
Demarreur 60 WORKSHOP
Alternateur 60 WORKSHOP
Thermostart 60 WORKSHOP
Seal,Washer 60 WORKSHOP
Filter 60 WORKSHOP
Screen 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Strainer 60 WORKSHOP
Cartridge 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Filter 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
Filter 60 WORKSHOP
TETE 60 WORKSHOP
AGRAFFE G 1 15 40 WORKSHOP
METRIX 60 WORKSHOP
DIFLUSEUR 60 WORKSHOP
COLLIER 60 WORKSHOP
CONTRE 60 WORKSHOP
JOINTS 60 WORKSHOP
TUYAU 60 WORKSHOP
FLEXIBLE 60 WORKSHOP
BOITIER 60 WORKSHOP
CAPTEUR 60 WORKSHOP
ARTICULATION 60 WORKSHOP
GOUPILLE 60 WORKSHOP
GOUPILLE 60 WORKSHOP
BAQUE 60 WORKSHOP
RONDELLE 60 WORKSHOP
BOULON 60 WORKSHOP
ROD 60 WORKSHOP
BUSHING 60 WORKSHOP
PLATE 60 WORKSHOP
BOLT 60 WORKSHOP
WASHER 60 WORKSHOP
BOLT 60 WORKSHOP
BOLT 60 WORKSHOP
BOLT 60 WORKSHOP
THERMOSTHA 60 WORKSHOP
N TETE 60 WORKSHOP
A KIT-SEAL-H.C 60 WORKSHOP
A LAME 60 WORKSHOP
A EMBOUT 60 WORKSHOP
A VIS 60 WORKSHOP
A ECROU 60 WORKSHOP
Turbo 5 WORKSHOP
Pompette 5 WORKSHOP
CYLINDRE DE FREIN AR 10 WORKSHOP
CROISSIONS 60 WORKSHOP
CARDANS 60 WORKSHOP
TAMBOURS 60 WORKSHOP
CROISSIONS 60 WORKSHOP
CARDAN 60 WORKSHOP
N ADAPTATEUR 60 WORKSHOP
WORKSHOP
67226-67 BOITE DE 3000 POINTES POUR MOLETTE 67225-67 60
67221-67 PINCE COUPANTE EN BOUT FILS ACIER 60 WORKSHOP
DEMARREUR 60 WORKSHOP
ALTERNATEUR 90 A 60 WORKSHOP
Amotissous AV 60 WORKSHOP
Emetteur 60 WORKSHOP
Recepteur 60 WORKSHOP
Amortisseur AV 2 WORKSHOP
Amortisseur AR 2 WORKSHOP
Plaquette AV 2 WORKSHOP
VALVE-Empl-10/1D/10003 20 WORKSHOP
Culasses 6 WORKSHOP
COURROIES 30 WORKSHOP
CLACSON EN 12 V 60 WORKSHOP
EROUES 60 WORKSHOP
GOURJONS 60 WORKSHOP
SEGMENTS 60 WORKSHOP
Inspection &
Hydraulic cylinder Oil Pressure Rating 250bar,stroke
9 Hydraulic cylinder 1 Set 4 replacement based
500mm
on defects
10 Cylinder Pin Hydraulic cylinder pin, Pin Size 40mmX120mm 1 Set Set 3monthly
11 Cylinder Pin back Hydraulic cylinder pin, Pin Size 40mmX200mm 1 Set Set 3monthly
12 Hydraulic hose pipe Hydraulic hose pipe 3/4inch 5.5 m 250,4000psi 2 Set 1
13 Air breather AIR BREATHER, FSB 60HN 1 Set 3 6monthly
14 Hydraulic oil Hydraulic oil grade 68 305ltr LTR 3 3monthly
15 Sensors PNP NO+NC RANGE 100MM 24VOLT Set 6 Bi-monthly
16 Vesconite bearing Set 3 3monthly
17 Section strainer SUCTION FILTER,SS340L/1019 Set 3 3monthly
18 Return line filter element RETURN FILTER ELEMENT(HYDAX CRLF1225 0120) Set 2 3monthly
Push feeder
19 Float switch Set 2 3monthly
20 Thermostat valve Set 6 6monhtly
Siphon d’évier de cuisine à 2 bacs avec trop plein piece 100 PROJECT
PLUNGER,DETENT 24 EXPLORATION
LATCH, HQ 24 EXPLORATION
GEOLOGY
TRANSPORT ENGIN PELLE SUR SITE (FRANCEVILLE/OKONDJA) 24
PELLE A CHENILLE LONKING 24 GEOLOGY
HQ SPANNEL 16 GEOLOGIE
BUSHING 80 GEOLOGIE
ROD(HQ3) 40 GEOLOGIE
Gant PVC (rouge) 100 HSE
Gant latex jetable 500 HSE
Gant latex menage (long) 100 HSE
Gant de manutention lourd 200 HSE
Gant de travaux electriques (singer) 100 HSE
Gant de préhension (singer) 400 HSE
Gant de soudure 100 HSE
Capuche de soudure 10 HSE
Paire de guêtres de soudure 10 HSE
Manchettes de soudure 10 HSE
Tablier en cuire 10 HSE
Veste de soudure (en cuire) 10 HSE
Visiere de protection 10 HSE
Cagoule de soudure 10 HSE
LABORATORY
TESTWORK ON LEBAYE Mn Fines-upgrading MAK ANALYTICAL 2
SAMPLE PRERATION AND MEASUREMENT OKONDJA LABORATORY
PLANT,LABORATORY AND LOAYOUT 2
TETRASODIUM PYROPHOSPHATE KG 72 LABORATOIRE
39791 DUST MASK FFP3 + VALVE 5000 LABORATORY
HYDROCHLORHYDRIC ACID L 60 LABORATORY
ACETONE,1L 40 LABORATORY
3 PHASE INDUCTOR MOTOR,FRAME MS 100L-6 1.5W HP 2 RPM 945 V 220/380 A 7.00/4 3 LABARATORY
URETHANE INSERT 12 LABARATORY
CARTOUCHE MASQUE RESPIRATOIRE 124 LABORATORY
4 MINE
Vis d'arrêt du piston de retrait du volant moteur pour Stihl 070
Support carter cylindre pour tronçonneuse Stihl 070 4 MINE
HIGHLIGHTERS 20 WAREHOUSE
STAPPLE PINS#0246 20 WAREHOUSE
STAPPLE PINS#246 20 WAREHOUSE
TABLE RULERS 20 WAREHOUSE
PAPER CLIPS 20 WAREHOUSE
MULTICOLOUR DOCUMENT FOLDERS 500 WAREHOUSE
IN AND OUT TRAYS-1 STAIR 20 WAREHOUSE
93101-22067 20 WAREHOUSE
ESSENCE 72 WAREHOUSE
SEAL 60 WORK SHOP
WORKSHOP
TOLERIE ET PEINTURE POUR CAMION MERCEDES ACTROS OKM17 60
SEAL 60 WORKSHOP
O-RING 60 WORKSHOP
PLATE 60 WORKSHOP
SEAL 60 WORKSHOP
O-RING 60 WORKSHOP
O-RING 60 WORKSHOP
O-RING 60 WORKSHOP
CASE 60 WORKSHOP
O-RING 60 WORKSHOP
SPACER 60 WORKSHOP
SEAL 60 WORKSHOP
ADAPTER 60 WORKSHOP
AXE 60 WORKSHOP
AXE 60 WORKSHOP
AXE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
ENTRETOISE 60 WORKSHOP
CONNECTION A 60 WORKSHOP
GASKET-HOU 60 WORKSHOP
COURROIE 60 WORKSHOP
ALTERNATEUR 60 WORKSHOP
DEMARREUR 60 WORKSHOP
ELEMENT 60 WORKSHOP
FILTRE 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
REGULATOR 60 WORKSHOP
DEMARREUR 60 WORKSHOP
ALTERNATEUR 60 WORKSHOP
BELT 60 WORKSHOP
ELEMENT 60 WORKSHOP
FILTRE 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
SUPPORT 60 WORKSHOP
AXE 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
ANTIBROUILLARD 60 WORKSHOP
AXE 60 WORKSHOP
VIS 60 WORKSHOP
SEAL-LINKAGE 60 WORKSHOP
PN-YM 60 WORKSHOP
PIN-YM 60 WORKSHOP
Demarreur 60 WORKSHOP
Alternateur 60 WORKSHOP
Thermostart 60 WORKSHOP
CONNECTOR 60 WORKSHOP
TUBE 60 WORKSHOP
TUBE 60 WORKSHOP
HOSE 60 WORKSHOP
ELBOW 60 WORKSHOP
O-RING 60 WORKSHOP
TOOTH 60 WORKSHOP
SEAL 60 WORKSHOP
SEAL 60 WORKSHOP
O-RING 60 WORKSHOP
O-RING 60 WORKSHOP
BUSHING 60 WORKSHOP
BUSHING 60 WORKSHOP
Demarreur 60 WORKSHOP
Alternateur 60 WORKSHOP
Thermostart 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Filter 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
Filter 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Element 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Element 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
O-ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
Demarreur 60 WORKSHOP
Alternateur 60 WORKSHOP
Thermostart 60 WORKSHOP
Seal,Washer 60 WORKSHOP
Filter 60 WORKSHOP
Screen 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Strainer 60 WORKSHOP
Cartridge 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Filter 60 WORKSHOP
O-ring 60 WORKSHOP
O-ring 60 WORKSHOP
Breather 60 WORKSHOP
Breather 60 WORKSHOP
O-Ring 60 WORKSHOP
O-Ring 60 WORKSHOP
Breather 60 WORKSHOP
Filter 60 WORKSHOP
TETE 60 WORKSHOP
AGRAFFE G 1 15 40 WORKSHOP
METRIX 60 WORKSHOP
DIFLUSEUR 60 WORKSHOP
COLLIER 60 WORKSHOP
CONTRE 60 WORKSHOP
JOINTS 60 WORKSHOP
TUYAU 60 WORKSHOP
FLEXIBLE 60 WORKSHOP
BOITIER 60 WORKSHOP
CAPTEUR 60 WORKSHOP
ARTICULATION 60 WORKSHOP
GOUPILLE 60 WORKSHOP
GOUPILLE 60 WORKSHOP
BAQUE 60 WORKSHOP
RONDELLE 60 WORKSHOP
BOULON 60 WORKSHOP
ROD 60 WORKSHOP
BUSHING 60 WORKSHOP
PLATE 60 WORKSHOP
BOLT 60 WORKSHOP
WASHER 60 WORKSHOP
BOLT 60 WORKSHOP
BOLT 60 WORKSHOP
BOLT 60 WORKSHOP
THERMOSTHA 60 WORKSHOP
N TETE 60 WORKSHOP
A KIT-SEAL-H.C 60 WORKSHOP
A LAME 60 WORKSHOP
A EMBOUT 60 WORKSHOP
A VIS 60 WORKSHOP
A ECROU 60 WORKSHOP
Turbo 5 WORKSHOP
Pompette 5 WORKSHOP
CYLINDRE DE FREIN AR 10 WORKSHOP
CROISSIONS 60 WORKSHOP
CARDANS 60 WORKSHOP
TAMBOURS 60 WORKSHOP
CROISSIONS 60 WORKSHOP
CARDAN 60 WORKSHOP
N ADAPTATEUR 60 WORKSHOP
WORKSHOP
67226-67 BOITE DE 3000 POINTES POUR MOLETTE 67225-67 60
67221-67 PINCE COUPANTE EN BOUT FILS ACIER 60 WORKSHOP
DEMARREUR 60 WORKSHOP
ALTERNATEUR 90 A 60 WORKSHOP
Amotissous AV 60 WORKSHOP
Emetteur 60 WORKSHOP
Recepteur 60 WORKSHOP
Amortisseur AV 2 WORKSHOP
Amortisseur AR 2 WORKSHOP
Plaquette AV 2 WORKSHOP
VALVE-Empl-10/1D/10003 20 WORKSHOP
Culasses 6 WORKSHOP
COURROIES 30 WORKSHOP
CLACSON EN 12 V 60 WORKSHOP
EROUES 60 WORKSHOP
GOURJONS 60 WORKSHOP
SEGMENTS 60 WORKSHOP
Consider corrective maintenance as comapred with predetermined maintenance (latter as suggested by OEM must be done in relation with the physical state of equipment & machinery)
Preventetive Maintenance - In phase to be optimised (Consider training and standard operating procedures in terms of job execution, identification of spares including critical spares & use, RCFA)
Condition Monitoring, consider including monitoring devices on critical & costly equipment and machinery
To ensure that machine availbility and utilization is maintained on international standards, as well as Safety & Health Requirements are preserved & compliant
Predictive maintenance - ensure that critical equipment & machinery is equipped with sensors and other devices to be able to be anaylsed and prevent any risk on equipment and machinery
Improvement Projects
Type of Scheduled
Maintenance
Description Site Body No. Machine Model Serial No Chassis Date of Service Type of Maintenance Mileage (km) Next Maintenance Remaining hours Current Reading
Type of Scheduled
ADT (KUMATSU) Category Model Serial No. Chassis No. Date of Service Type of Maintenance Mileage(km) Next Maintenance Remaining Hours Current hours Maintenance
HM400-3R OKM01 ADT 8543 KMTHMO13LJD008543 14- 01-2021 500H 4655H 4905H 37 4868H 750H /3000H
HM400-3R OKM02 ADT 8544 KMTHMO13LJD008544 14-01-2021 500 H 7142H 7392H 41 7351H 750H /3000H
HM400-3R OKM03 ADT 8545 KMTHMO13LJD008545 30-01-2021 750H 7686 7236H 250 6986H 2000H/3000
HM400-3R OKM04 ADT 8551 KMTHMO13LJD008551 23-01-2021 250H 6259H 6509H 218 6291H 1000H/3000
HM400-3R OKM05 ADT 8552 KMTHMO13LJD008552 17 - 01-2021 500H 5588H 5838H 96 5742H 750H /3000H
HM400-3R OKM24 ADT 8562 KMTHMO13LJD008562 30-09-2020 500H 4317H 4567H 128 4439H 750H /3000H
HM400-3R OKM25 ADT 8565 KMTHMO13LJD008565 09 -01-2021 750H 5089H 5339H 250 5089H 750H /3000H
FEL
LOADER OKM 50 TRACT 444 CAT00444CL700168 500H 3213H 250 2963H 750H /3000H
LOADER(KUMATSU) OKM06 WA-500-6R 60232 KMTWA104KJD060232 12-11-2020 500H 5438H 5688H 250 5438H 750H /3000H
LOADER(KUMATSU) OKM07 WA-600-6R 65097 KMTWA104KJD065097 18-01-2021 1000H 6181H 6431H 250 6181H 250H/
LOADER(VOLVO) OKM35 L220G N°1 JE009582 VCEL220GCF0009582 11-01-2021 500H 6805H 7055H 250 6805H 750H /3000H
LOADER(VOLVO) OKM38 L220H N°2 CF0009655 VCEL220GCF0009665 13-01-2021 1000H 9591H 9841H 250 9591H 750H /3000H
EXCAVATOR
CAT OKM28 320 NEW ZBN11752 CAT00320EZBN11752 12-01-2021 500H 3633H 3883H 243 3640H 250H/3000
CAT OKM 47 330GC FER 00448 12-01-2021 250H 1392H 1642H 34 1608H 500H/3000
CAT OKM32 320 2BN02133 CAT00320ZBN02133 13-01-2021 500H 13410H 13660H 4 13656H 750H /3000H
CAT OKM33 324D E500753 CAT00320TZE500753 04-12-2020 750H 7845H 8095 374 7721H 1000H/3000
CAT OKM26 PC-450-8R 76629 KMTPC196PJC076530 1/25/2021 250H 5460H 5710H 250 5460H 500H/3000
CAT OKM10 PC-450-8R 76530 KMTPC196PJC087579 22-01-2021 500H 5518H 5768H 250 5518H 750H /3000H
KUMATSU OKM08 PC-800-8R 70239 KMTPC188EJC070239 18-01-2021 250H 6902H 7152H 124 7028H 500H/3000
CAT OKM00 PC345 GC NEW 61629 CAT00345CKEF10246 250H 250H -20 270H
TRACK DOZER
TRACK DOZER OKM-11 D155A-6R 87579 KMT0D105JJCO87579 23-01-2021 250H 6295H 6545H 182 6363H 500H/3000
TRACK DOZER OKM27 D155A 87512 KMTOD105EJC087512 22-12-2020 750H 4576H 4826H -167 4993H 1000H/3000
TRACK DOZER CAT OKM39 D6R2 AW6FP9N5624C711 12-01-2021 250H 3422H 3672H 250 3422H 500H/3000
TRACK DOZER OKM37 D85X15 10983 KMT0D036A01010983 17- 12 -2020 750H 4781H 5031H 250 4781H 1000H/3000
GRADER
GRADER NIVELEUSE OKM23 140G 5MDO3236 9-11-2020 500H 13545 13795H -164 13959H 750H /3000H
GRADER NIVELEUSE OKM-09 DG655-5 56466 KMTGO26TJA056466 . 09-01 -2021 250H 5746H 5996H 30 5966H 500H/3000
GRUES (CRANE) OKM 30 ISLE3HD CO166658 LA9B7F340JLAL9219 21-10-2020 1000H 872H 1122H 102 1020H 250H/3000
COMPACTOR
COMPACTEUR CAT OKM 40 CS-663E DAJ00553 CATCS663VDAG08553 01-06-2020 500H 5146H 5396H 100 5296H 750H /3000H
COMPACTEUR CAT OKM 51 CS11GC JC008542K 40CS11GRK800701 250H 46 204H
MANITOU OKM 20 MX50-4 EJCOO753 MAN00000H01008541 15-01-2021 250H 2255H 2505H 250 2255H 500H/3000 H
TRUCK
MAN TRUCK OKM-12 AM-723-IT MWA34WZZ3JP101781 1/22/2021 5000KM 7144 12144KM 5000 7144KM 5000KM/60000
WATER BOWZER OKM-13 AM-722-IT WMAZ6WZZXJP101862 . 08-10-2020 14061 14061KM 19061KM 5000 14061KM 5000KM/60000
MAN TRUCK OKM-14 HR-447-AA WMA34WZZ3JM779851 25-01-2021 5000KM 66579 71579KM 5000 66579KM 5000KM/60000
MAN TRUCK OKM-16 HR-448-AA Panne Boite de vitesse WMA34WZZ6JM779794 23-10-2019 5000KM 27510H 35554KM 8000 27554KM 5000KM/60000
MERCEDESS TRUCK OKM 17 AM-989 -IT NGM WDB93216310312639 30-11-2020 5000KM 41035H 46035KM 3549 42486KM 5000KM/60000
MERCEDESS TRUCK OKM 18 AM-988 -IT panne WDB93216310312275 21-10-2020 5000KM 48622 KM 53622KM 5000 48622KM 5000KM/60000
MAN TRUCK HS OKM-31 DA-967-AA HS MWA34WZZ3JM146129 26-11-2020 HS HS 61KM 60 1KM 5000KM/60000
MAN TRUCK OKM34 DZ-119-AA Man d'entretien WMAH26ZZ86M443700 28-12-2020 5000KM 20711KM 25711KM 4708 21003KM 5000KM/60000
MAN TRUCK HS OKM 36 FS-457-AA WMAFO9F826M215905 1/18/2021 5000KM 10161 15161KM 5000 10161KM 5000KM/60000
GENERATOR
GENERATOR CAT 100KVA 00CH4VECLO2266 OFFICE 21-01-2021 250H 15623H 15873H 229 15644H 250H/ 3000
GENERATOR CAT 200KVA 00C71KECW03410 PLANT 1 26-01-2021 250H 8376H 8626H 250 8376H 250H/ 3000
GENERATOR CAT X 150375 PROGECTEUR 02-11-2020 250H 2754H 3004H 215 2789H 250H/ 3000
GENERATOR CAT 1100KVA JSJ 03779 PLANTE 2 14-01-2021 250H 6681H 6931H 250 6681H 250H/ 3000
GENERATOR CAT 1100KVA FLX00333 PLANTE 25-01-2021 250H 3846H 4096H 54 4042H 250H/ 3000
GENERATOR CAT 200.00KVA 00C71PECW03387 LEBAYE 21-12-2020 250H 5677H 5927H 250 5677H 250H/ 3000
GENERATOR CAT X PLANT 2 15-09-2020 250H 1522H 1772H -1998 3770H 250H/ 3000
GENERATOR CAT 200KVA 00C71GECW03411 LEBAYE 21-12-2020 250H 4241H 4491H -76 4567H 250H/ 3000
GENERATOR CAT 200KVA 00C71GECW03409 BASIN 25-01-2021 250H 6962H 7212H 250 6962H 250H/ 3000
GENERATOR CAT X GG10009562 19-11-2020 250H 615H 865H 250 615H 250H/ 3000
GENERATOR CAT X GG10009557 21-01-2021 250H 1673H 1923H 250 1673H 250H/ 3000
GENERATOR CAT X GG10009569 MINE 26-11-2020 250H 1261H 1511H 250 1261H 250H/ 3000
GENERATOR CAT 16.5KVA 00C22EGBY05456 LA MINE 05-01-2021 250H 7376 7626H 250 7376H 250H/ 3000
GENERATOR CAT 45KVA 00C33HEC503484 ANTENE 14-01-2020 250H 5967H 6220H 62 6158H 250H/ 3000
GENERATOR CAT 20KVA 00C22CGBY05482 WORK SHOP 08-01-2020 250H 5299H 5549H 229 5320H 250H/ 3000
GENERATOR CAT 16.5KVA 00C200HGBY05455 PONT BASCULE 14-01-2021 250H 5772H 6022H 135 5887H 250H/ 3000
GENERATOR CAT 16.5KVA 00CKGBY07576 PANNE 26-11-2020 507H 507H 757H 250 507H 250H/ 3000
GENERATOR CAT 16.5KVA 00CKGBY07875 10-11-2020 250H 10796H 11046H 250 10796H 250H/ 3000
GENERATOR CAT 15KVA EC53490 OKONDJA 17-06-2020 250H 347H 597H 250 347H 250H/ 3000
ZEST 350KVA B0150308701 BASIN 22- 01-2021 250H 5067H 5317H 250 5067H 250H/ 3000
ZEST 62.5KVA 18010134 PANNE A LA ATELIER 05-10-2020 250H 8955H 9205H 250 8955H 250H/ 3000
ZEST 100KVA 52599130 PANNE ATELIER 1711H 250H 1652H 252 1400H 250H/ 3000
Information to be updated by the Maintenance Planner
No.: Description Machine No.: Reg. No. Chassis No. Date of Service Last Service Current Mileage Next Service Next Service Interval Type of Maintenance
LDV Machine No.: Reg. No. Chassis No. Date of Service Last Service Current Mileage Next Service Next Service Interval Type of Maintenance
1 MAZDA BT 50 OKV-02 AM-568-IT MM7UR4DB9KW862013 07/04/2020 90281KM 90281KM 95281KM 28/02/2021 5000KM / 60000KM
2 MAZDA BT 50 OKV-04 AL-626-IT MM7UDBXGW523211 11/25/2020 224079.KM 224079KM 229079KM 3/2/2021 5000KM / 60000KM
3 MAZDA BT 50 OKV-06 HV-351-AA MM7UR4SBXKW935883 8/18/2020 52461KM 52461KM 57461KM 23/02/2021 5000KM / 60000KM
4 MAZDA BT 50 OKV-10 AM-311-IT MM7UR4DBOGW796651 1/16/2021 107565.KM 106959KM 112565KM 26/02/2021 5000KM / 60000KM
5 TOYOTA HILUX OKV-20 HU-599-AA AHTFB9CDX05396161 12/4/2020 179019 KM 179836KM 184019KM 26/02/2022 5000KM / 60000KM
6 TOYOTA HILUX OKV-15 HU-601-AA AHTFB9CD805396160 12/17/2020 70073 KM 77271KM 82271KM 25/02/2021 5000KM / 60000KM
7 TOYOTA HILUX OKV-16 HU-603-AA AHTFB9CDX05396158 12/24/2020 120721 KM 120721KM 125721KM 16//02/2021 5000KM / 60000KM
8 TOYOTA HILUX OKV-18 HU-598-AA AHTFB9CD10536162 12/22/2020 131397 KM 131397KM 136397KM 17/02/2021 5000KM / 60000KM
On breakdown(to be
TOYOTA HIACE (BUS/TAXI) 10/15/2020 5000KM / 60000KM
9 OKV-00 HC-448-AA JTGJS02P8E004B073 186034 KM 186034KM 191034KM rescheduled)
10 NISSAN PATROL OKV-00 HT-576-AA JN1TESY61Z0573414 10/29/2020 22884 KM 22884KM 27884KM 17/02/2021 5000KM / 60000KM
11 NISSAN MINI OKV-09 HQ-962-AA JN1VC4E26Z0015602 1/21/2021 197370KM 197370KM 202370KM 22/02/2021 5000KM / 60000KM
DOZER (D155)
DOZER (D6)
DOZER (D85)
GRADER (DG655S)
GRADER (140G)
GRADER (15CE3HD)
COMPACTOR (C5663E)
COMPACTOR (C511G6)
MANITOU