Professional Documents
Culture Documents
Derale Catalog
Derale Catalog
00
www.derale.com
Table of Contents
www.derale.com
Combination Oil & Transmission Coolers..................................................................21
Fuel Filter Kits...........................................................................................................23
Oil Filter Relocation Kits............................................................................................23
Stacked Plate Engine Oil Coolers.............................................................................24
Engine Oil Cooler Accessories..................................................................................24
With the increasing popularity of the light diesel truck, the influx of increased
horsepower products, and the high demand of towing, the need for cooling
products has become essential. From a stock truck to highly modified truck,
look to Derale for all your cooling product needs.
Atomic-Cool Electra-Cool
FORD Remote Remote Transmission Transmission Severe Duty
Year/Engine Transmission Transmission Pan Cooler Filter Kit Fan Clutch
Cooler Kit Cooler Kit
82-87/6.9L 13950 13900 14108 13090 22601
88-92/7.3L 13950 13900 14108 13090 22601
93-94/7.3L 13950 13900 14108 13090 22607
94-97/7.3L 13950 13900 14108 13090 22609
98-03/7.3L 13950 13900 14108 13090 22612
04-05/6.0L 15950 15900 14108 13090 N/A
DODGE
Year/Engine
89-93/5.9L 15950 15900 14110 13090 22070
94-99/5.9L 15950 15900 14110 13090 22070
93-94/5.9L 15950 15900 14110 13090 22070
00-05/5.9L 15950 15900 14110 13090 22612
www.derale.com
3
Electric Fans
Amp
Part No. CFM RPM Width Height Thickness
Draw
16812 1360 2700 10.0 24.75” 11.5” 2.75”
16927 4000 1670 50.0 26” 18” 3.19”
16928 4000 1670 50.0 28.5” 13.82” 3.19”
16934 4000 1670 50.0 31.62” 15.75” 3.19”
www.derale.com
NEW!
4
Electric Fans
Amp
Part No. CFM RPM Width Height Thickness
Draw
16217 2400 1850 19.2 17” 17” 2.61
16817 2400 1850 38.5 34” 17” 2.61
NEW!
www.derale.com
Pusher Fan Only • Designed as a primary cooling fan Puller Fan Only
• High output 265 Watt motor
Amp
Part No. CFM RPM Width Height Thickness
Draw
16925 2200 1680 23.4 12.25” 12.75” 3.19”
16926 2200 1680 23.4 15.75” 15.75” 3.19”
5
Electric Fans
Tornado Fans
Part Amp
Size CFM RPM Dim. A Dim. B Dim. C Dim. D
No. Draw
16507 7” 400 2700 4.8 7.24” 7.03” 2.55” 1.97”
www.derale.com
6
Electric Fans
www.derale.com
Part Amp
Size CFM RPM Dim. A Dim. B Dim. C Dim. D
No. Draw
16910 10” 500 2460 6.4 10.7” 11.28” 2.3” 1.25”
16912 12” 750 2250 9.0 11.6” 12.27” 2.45” 1.25”
16914 14” 1100 2250 12.4 14.05” 14.65” 3.29” 1.25”
16916 16” 1550 1860 15.5 16.02” 16.65” 3.5” 1.25”
* CFM rating tested at zero static pressure.
7
Electric Fan Thermostats
8
Electric Fan Accessories
9
Fan Mounted Oil Coolers
10
Fan Mounted Oil Coolers
www.derale.com
The In-Line fan thermostat is a clean and simple Installation kits to mount remote coolers.
way to control the electric fan on remote coolers. Transmission cooler kits include hose and all
Designed to thread onto the AN inlets of Derale necessary mounting and installation hardware.
Cooler cores, the kit also includes hose barb Engine oil cooler kits include thermostatic
adapters that allow you to mount it on any cooling sandwich adapter, hose and all necessary
line with any brand cooler. Thermostat activates mounting and installation hardware.
fan at 180o, turn off is 170o. NOTE: Chevrolet V-8’s prior to 1996 require kit 15753
with larger oil filter 0-ring sandwich adapter. Chevrolet
V-8’s after 1996 use the 16752 kit with small O-ring.
11
Transmission Coolers
12
Transmission Coolers
www.derale.com
13200 2 1/2”x12”x3/4”
13210 2 1/2”x7 3/4”x2 1/4”
13212 5”x7 3/4”x3/4”
www.derale.com
• Heat sink design produces high heat transfer with minimal airflow
• External and internal heat dissipating fins
• Compact 3” diameter core can be mounted in a variety of locations,
frame rail, radiator bottom and floor boards
• Can cool transmission fluid, fuel, engine oil, power steering,
or gear lube
• Complete hardware kit included on all kit part numbers
16
Pan Coolers & Accessories
Derale Transmission Pan Coolers use the air flowing beneath the
vehicle to reduce fluid temperatures from 20°F to 50°F. Features
include heavy-gauge stamped steel construction, patented turbulator
cooling tubes and a zinc plated finish. Increases fluid capacity.
Replacement pan gasket included.
Extra
Application Part No. Pan Depth Tube Depth
Capacity
GM Turbo 350 14100 1 Qt. 8 Oz. 2.75” 1.88”
GM Turbo 400 14101 1 Qt. 3 Oz. 2.75” 1.88”
GM Turbo 400 Deep Pan 14102 1 Qt. 3 Oz. 4.00” 3.50”
(Requires deep pickup)
GM 700R4, 4L60E 14104 2 Qt. 3.50” 2.38”
GM 4L80E 14107 3 Qt. 4.00” 2.38”
Ford 4R100, E4OD 14108 3 Qt. 4.63” 2.63”
Dodge 518, 618, 727 Deep 14110 3 Qt. 4.50” 3.63”
www.derale.com
transmission filter. The filter system prevents any
foreign particles from entering the valve body or other
internal components, while maintaining the fluid and
removing any varnish, sludge or contaminants.
Transmission Line
www.derale.com
Compression Fittings
Compression fittings can be spliced into
Dodge/Jeep Radiator transmission cooling lines for easy transmission
Adapter Kit cooler installation.
Fits most 1995 and later Dodge
Trucks and 1985 and later Jeeps
with 3/8” rubber transmission lines.
Fittings splice into factory hoses. NEW!
Part No.
13028
Part No. Size
13031 5/16” Cooling Line, 3/8” Hose Barb
13032 3/8” Cooling Line, 3/8” Hose Barb
13033 1/2” Cooling Line, 1/2” Hose Barb
18
Transmission Cooler Accessories
Transmission
Temperature Gauge
2-5/8” dia. electric gauge includes Rigid Mount Kit Insta-Mount Kit
mounting bracket, 1/8” NPT sensor 4 metal brackets and 8 screws that are 4 plastic rods, retainers and foam pads
and trans-pan adapter/drain plug to bendable to fit any surface. Stronger for easy installation of a trans cooler.
mount sensor in pan. for severe duty applications.
Cooler Installation Kit Stainless Hose Clamps Oil Pan Drain Plug Kit
Complete installation kit for mounting Will fit hose from 5/16 - 1/2”. Can be used to mount oil
a trans cooler including hose. temperature sensor.
www.derale.com
180º Fluid Control Thermostat Braided Transmission
Allows fluid to bypass oil cooler until 180º. Hose with Swedged Ends
Part No. Part No. Length ID
13011 13012 6 feet 11/32”/AN6 Fittings
13013 12 feet 11/32”/AN6 Fittings
Transmission Hose
Meets OEM specs.
The bottom half of your engine relies entirely on the Keeping the oil in the correct temperature range
engine oil for its cooling. The crankshaft, bearings, prolongs the life of the oil, helping to keep internal
camshaft, lifters, connecting rods and pistons rely engine parts within the factory tolerances while
on the engine oil to control the temperature. That’s extending the life of the engine. Kits include a
one of the reasons why keeping the oil within its thermostatic sandwich adapter, which allows the
recommended operating range is so critical. The oil to bypass the oil cooler until it reaches operating
other critical purpose of the engine oil is to lubricate temperature, 10 feet of OEM spec oil hose and all
the bearings and the cylinder walls. necessary mounting hardware.
* Fits most gas powered engines with a spin-on oil filter. Call factory for specific applications. Chevrolet/GMC trucks 2001 and
newer except 7.4L (454) and 8.1L must use this small diameter adapter. All Chevrolet/GMC four wheel drive trucks with 5.0L &
5.7L V-8’s from 2000 - 1988 require the small diameter adapter.
** Most Chevrolet/GMC V-8’s prior to 2001 (except 4-wheel drive V-8’s after 1988) require this large diameter sandwich adapter.
All 7.4L (454) and 8.1L (all years).
20
Engine Oil Cooler Kits
Plate & Fin Oil Coolers were designed for the high Plate & Fin
heat extraction requirements of today’s computer
controlled drivetrains. You will find this style cooler
on many OEM vehicles.
Cooler size: 10” x 10” x 1-1/4”
www.derale.com
installation.
Cooler size: 12.5” x 17” x ¾
* Fits most gas powered engines with a spin-on oil filter. Call factory for specific applications. Chevrolet/GMC trucks 2001 and
newer except 7.4L (454) and 8.1L must use this small diameter adapter. All Chevrolet/GMC four wheel drive trucks with 5.0L &
5.7L V-8’s from 2000 - 1988 require the small diameter adapter.
** Most Chevrolet/GMC V-8’s prior to 2001 (except 4-wheel drive V-8’s after 1988) require this large diameter sandwich adapter.
All 7.4L (454) and 8.1L (all years).
21
Engine Oil Cooler
* Fits most gas powered engines with a spin-on oil filter. Call factory for specific applications. Chevrolet/GMC trucks 2001 and newer except 7.4L
(454) and 8.1L must use this small diameter adapter. All Chevrolet/GMC four wheel drive trucks with 5.0L & 5.7L V-8’s from 2000 - 1988 require
the small diameter adapter.
** Most Chevrolet/GMC V-8’s prior to 2001 (except 4-wheel drive V-8’s after 1988) require this large diameter sandwich adapter. All 7.4L (454) and
8.1L (all years).
*** All Honda, mazda, Isuzu, Hyundai, Daihatsu, Daewoo and Kia vehicles require this adapter, Mitsubishi 1992 and newer, Nissan/Infinity 1998
and newer. Call factory for specific Toyota and other applications.
22
Filtration Kits
Derale’s Fuel Filter & Water Separator remove all contaminants and
www.derale.com
water preventing clogged injectors and improving engine performance.
Water can be purged from the filter cartridge with the all-metal, self-
venting drain. Replacement filter cartridges sold separately.
23
Engine Oil Accessories
Part No.
15719
24
Heavy Duty Flex Fans
www.derale.com
Blade Blade
Part No. Diameter Rotation Part No. Diameter Rotation
Depth Depth
17013 13” Standard 2 1/8” 17213 13” Standard 2 1/8”
17015 15” Standard 2 3/4” 17215 15” Standard 2 3/4”
17017 17” Standard 2 3/8” 17217 17” Standard 2 3/8”
17018 18” Standard 2 3/8” 17218 18” Standard 2 3/8”
17019 19” Standard 2 3/8” 17219 19” Standard 2 3/8”
17617 17” Reverse 2 3/8” 17817 17” Reverse 2 3/8”
17618 18” Reverse 2 3/8” 17818 18” Reverse 2 3/8”
17619 19” Reverse 2 3/8” 17819 19” Reverse 2 3/8”
* See page 28 for fan spacer & nose cone kits.
25
High Performance Flex Fans
High Performance Flex Fans feature a narrow blade design for maximum airflow in tight space
applications. Embossed center hubs and four-rivet blade attachment provide increased strength.
Plastic Fans
Our plastic fans provide ample airflow at a reasonable
price. The lightweight design extends water pump life.
Standard rotation only.
Part No. Diameter
19613 13”
19614 14”
19615 15”
19616 16”
19617 17”
* See page 28 for fan spacer & nose cone kits.
19618 18”
26
Clutch & Race Fans
Fan Clutch Fans Our fan clutch fans are designed to replace the
factory fan. The 8-hole center hub will fit most OE fan
clutches. Standard or reverse rotation.
Part No. Diameter Rotation
17117 17” Standard
17118 18” Standard
17119 19” Standard
17120 20” Standard
17917 17” Reverse
17918 18” Reverse
17919 19” Reverse
17920 20” Reverse
Rigid Race Fans Our rigid all metal fans provide more airflow than
• Maximum Full-Time Airflow factory fans at all RPMs. They meet most racing
• Rated Up To 8,000 RPMs regulations requiring metal belt-driven fans. They
• Low Cost Replacement for Fan Clutch and Fan are available with steel fan blades in standard or
www.derale.com
17320 20” Standard 6000
17413 13” Reverse 8000
17415 15” Reverse 8000
17417 17” Reverse 8000
17418 18” Reverse 6000
17419 19” Reverse 6000
17420 20” Reverse 6000
Aluminum Blades
Part No. Diameter Rotation RPM Rating
17513 13” Standard 8000
17515 15” Standard 8000
17517 17” Standard 8000
17518 18” Standard 6000
* See page 28 for fan spacer & nose cone kits.
27
Fan Spacers & Nose Cone Kits
Our extruded aluminum fan spacers are a threaded male pilot hole and a billet aluminum
available in a variety of sizes and come with Nose Cone. The spacer and fan are bolted
a clear, blue or red anodized finish. Mounting to the water pump flange and the nose cone
hardware included. Refer to instructions below threads onto the fan spacer. Nose Cone Kits
for choosing the correct fan spacer. come in blue or red anodized or chrome finish.
Nose Cone Kits hide the exposed bolts and Mounting hardware included. For standard
www.derale.com
pilot hub at the center of the flex fan. The kit rotation fans only.
contains an extruded aluminum fan spacer with
Warning: Fan should have a minimum clearance of 3/4” from the radiator, belts, hoses or pulleys.
28
Fan Clutches
www.derale.com
Non Thermal Fan Clutch
Truck Drive Fan Clutch Import Fan Clutch Screw On Fan Clutch
See Fan Clutch Application Guide for more information or visit us at www.derale.com
29
3901 Medford Street, Los Angeles, CA 90063
Tel: 323-266-3850 • 800-421-6288 • Fax: 323-263-3948
www.derale.com