Professional Documents
Culture Documents
High Strength Epoxy Adhesive Outline
High Strength Epoxy Adhesive Outline
How to use
<Work>
With a separator
Construction
While peeling off
Squeegee construction is
Example: 1.0mm thick x 2 sheets Example: Construction on a pipe with approx. R50
Typical Properties
Lap shear strength 23 MPa (1mm thick), 20MPa (2mm thick) adherends: epoxy-based CFRP
Application development
Structural Adhesives, Structural Repair Agents, and Structural Fillers
TEL:
Tsuchiya Co., Ltd. E-mail:
Typical Properties
Aluminum
23 MPa (0.5mm thick)
(A2017)
14 MPa (0.5mm thick)
Anodized Aluminum
Fracture of adherends
Glass transition temperature 120°C (curing condition: 130°C x 2h)
How to use
<Work>
By hand gun/mixer
2-liquid weighing stir
Construction
discharge
Easy hardener
Typical Properties
Lap shear strength 22 MPa (1mm thick), 18MPa (2mm thick) adherends: epoxy-based CFRP
Application development
Structural Adhesives, Structural Repair Agents, and Structural Fillers
TEL:
Tsuchiya Co., Ltd. E-mail:
Typical Properties
Viscosity Main agent: about 350Pa · s Curing agent: about 150Pa · s After mixing: about 250Pa · s
13 18 20 20