9330 ARETE CCE, ARATE, CRBPUPE 9D, 2089
Where,
Number of soil layers in upper 30 m
4, = Thickness of layer
Va; = Shear wave velocity of layer i
1, = Field (uncorrected) Standard Penetration Value for layer
ke = Number of cohesive soil layers in upper 30 m
dg, = Thickness of cohesive layer i
su: = Undrained shear strength of cohesive layer {
The site profile up to a depth of 30 mis divided into n number of distinct soil or
rock layers. Where some of the layers are cohesive, kis the number of cohesive
layers. Hence". d; = 30m, while Yk; de; < 30 mf k 800 ~ 7
geological formation,
including at most § m of
weaker material at the
surface.
SB Deposits of very dense 360 - 800 >50 > 250
sand, gravel, or very stiff
clay, atleast several tens
of metres in thickness,
characterised by a
gradual increase of,
mechanical properties
with depth,ARATCRM CCD, OFSTS, CREA 99, 2029 opa>
Site Deserpton ofsoll ‘Average Soll Properties tn top 30 meters
Caer protilemp en 30 Shearwave SPTValue,N Undratned shear
meters depth velocity, 7, (m/s) (blows/30cm) strength, 5, (ePa)
SC Deep deposits ofdense 180-360 15-50 70-250
‘or medium dense sand,
gravel or stiffclay with
thickness from several
tens to many hundreds
of metres,
SD Deposits of loose-to- <180 <15 <70
medium cohesionless
soil (with or without
some soft cohesive
layers), or of
predominantly soft-to-
firm cohesive soil
SE _Asoil profile consisting - - -
ofa surface alluvium
layer with V. values of
type SC or SD and
thickness varying
between about S mand
20 m, underlain by
stiffer material with Vs >
800 m/s.
Si Deposits consisting, or < 100 - 10-20
containing a layer at (indicative)
least 10 m thick, of soft
clays/silts with a high
plasticity index (PI>
40) and high water
content
Sz Deposits of liquefiable - - -
soils, of sensitive clays,
or any other soil profile
not included in types SA
to SEorSi