Professional Documents
Culture Documents
No:643077ds54 Date:: Thordon Bearing Sizing Calculation
No:643077ds54 Date:: Thordon Bearing Sizing Calculation
No:643077ds54 VZOL7 Release 10 3225 Mainway, Burlington, Ontario, Canada L7M 1A6
Print Date: Ol-lul-2O2O Tel: 905-335-1440 www.thordonbearinqs.com
General Information
Thordon Distributor: PT. MULTITUNAS UNGGUL
Customer: PT. ALBANY
Project Reference: PUMP 717-P1
Calculated By: ERIKA
Checked By:
Comments:
Drawing Number:
MRP Number:
Data Sheet
ATTENTION =-
Means of axial retention required.
Positive flow of lubricant is required.
If pressure less than O.O7 MPa or load not given, bearing pressure is assum€d as O-O7 MPa (10 psi).
l}38igme4.f-21-e€ Machined at 30 oC
____-+ Machined Bearing Outside Diameter: 7*.9- :+ 78.65 mm +0.08, -0.00
Bearing Inside Diameter: 5ET5_ --..-j 58.23 mm +0.08, -0.00
Calculated Machined Bearing Length ffi* :-*237.91 mm +0.00, -0.50
Bearinq Wall Thickness: 10.20 10.21 mm (For reference only)
Number of Grooves: B
Width of Grooves: 6.00 mm
DePth of Grooves: 5.00 mm
----)
Peripheral Velocity: 5.39 m/sec
Input Data
Dimension Scale: Metric (mm)
Temperature Scale: Celsius
, Maximum Operating Temperature: 45 "C
- Minimum Operating Temperature:
Machine Shop Ambient Temperature 30 "c