Professional Documents
Culture Documents
Toshiba Grt100 Xrio Converter Manual Enu Tu2.30 v1.000
Toshiba Grt100 Xrio Converter Manual Enu Tu2.30 v1.000
OMICRON PTL
XRIO Converter
TOSHIBA GRT100
User Manual
V1.000
Contents
1 General Information............................................................................................................................ 3
2 Quick Start Information ...................................................................................................................... 3
3 Using the Converter ........................................................................................................................... 3
4 Required Software Version ................................................................................................................ 4
5 Functional Range................................................................................................................................ 4
6 Not Supported Functions ................................................................................................................... 4
7 OMICRON Test Strategy ..................................................................................................................... 5
8 Relay Settings Import ......................................................................................................................... 5
9 Converter Structure ............................................................................................................................ 6
9.1 GRT100 Section............................................................................................................................. 6
9.1.1 Relay Parameter Section .......................................................................................................... 6
9.1.2 Additional Information ............................................................................................................... 6
9.1.2.1 General Information section ............................................................................................... 6
9.1.2.2 Relay Information section .................................................................................................. 6
9.1.2.3 Power System Parameters section .................................................................................... 6
9.1.3 Template Controller (Advanced view) ....................................................................................... 7
9.1.4 RIOPlus (Advanced view) ......................................................................................................... 7
9.2 RIO ................................................................................................................................................ 7
9.2.1 Differential side 1- side 2 .......................................................................................................... 7
9.2.2 Differential side 1- side 3 .......................................................................................................... 7
9.2.3 Overcurrent Side 1, Side 2 and Side 3 ...................................................................................... 7
9.2.4 Thermal Overload Side 1 .......................................................................................................... 8
9.3 Activating the RIO functions ........................................................................................................... 8
9.4 Specific Features ........................................................................................................................... 9
1 General Information
The TOSHIBA GRT100 converter is designed for use with the OMICRON Test Universe 2.30 software for
testing the GRT100 current differential and overcurrent protection relays. The converter provides all
necessary data for testing the differential, overcurrent and thermal overload protection functions (see
chapter 2) of the GRT100 relays.
The following software version and functional range are modeled in this converter:
GRT100 201D
Serial No.: 9B04011FM0001C
In any way the converter is used, follow the quick start instructions and create your test using LinkToXRIO
or start using the relay specific test template (for more information, see the test template documentation).
5 Functional Range
The TOSHIBA GRT100 XRIO converter implements the following functions:
87 Differential protection for three and two windings transformer (see the Note below)
50/50N/51/51N Definite time and timed overcurrent for up to three windings
Harmonic blocking (2nd and 5th harmonic)
49 Thermal overload protection
Some of the functions listed above use the RIO interface of the Test Universe software. Consequently, the
test modules are configured automatically without using LinkToXRIO.
The following functions use the RIO interface:
87 Differential protection
50/50N/51/51N Definite time and timed overcurrent
49 Thermal overload protection
Note: For using 3 winding transformer or 2 winding transformer please set the "Transformer" parameter in
Additional Information- Power System Parameters – Transformer Information, to 3-winding or 2-winding
enumeration.
Frequency protection
Overexcitation protection
Monitoring Functions
9 Converter Structure
The converter is divided into two sections: the GRT100 section and the RIO section. Both sections consist
of several function blocks. The converter comes up in the standard view; the RIOplus section and the
template controller section can only be seen in the advanced view.
Information Side2 and Circuit Breaker Information Side3. The Transformer information subblock
includes following configurations information:
Winding count: Transformer configuration, 3 winding or 2 winding
SNOM Transformer: Rated apparent power of the transformer
9.2 RIO
The RIO section of the converter contains all specialized RIO functions needed to use the more
specialized test modules (like Advanced Differential or Overcurrent) provided by the OMICRON Test
Universe software.
Warning: Do not change any values in this section. The values have been set using the relay settings of
the Relay Parameter Section.
Note: Do not activate the former test object view in the advanced mode of the XRIO test object. Changing
parameters in this view could disable formulas in the RIO section.
50/51
50N/51N