Professional Documents
Culture Documents
2020061711456-F2120-Havadan-Suya-Isi-Pompasi-M11996-5 - Kopya
2020061711456-F2120-Havadan-Suya-Isi-Pompasi-M11996-5 - Kopya
EU
2 NIBE F2120
IT'S IN OUR NATURE
VVM 225 VVM 310 VVM 320 VVM 500 SMO 20 SMO 40
F2120-8 X X X X X X
F2120-12 X X X X X
F2120-16 X X X X X
F2120-20 X X X
NIBE F2120 3
IT'S IN OUR NATURE
INDOOR MODULES
VVM 225
APH
UN
LEK
LEK
APH
UN
VVM S320 VVM S320
Stainless steel, 3x230 V Enamel, 3x400 V VVM 225 VVM 225
Part no. 069 201 Part no. 069 206 Enamel, 3x400 V Stainless steel, 3x400 V
Part no. 069 227 Part no. 069 229
VVM S320 VVM 310 VVM 310
Stainless steel, 3x400 V Stainless steel, 3x400 V Stainless steel, 3x400 V
Part no. 069 196 Part no. 069 430 With integrated EMK 310
Part no. 069 084
4 NIBE F2120
IT'S IN OUR NATURE
CONTROL MODULES
SMO 20
Control module
Part no. 067 224
LEK
SMO 40
Control module
Part no. 067 225
LEK
NIBE F2120 5
IT'S IN OUR NATURE
Principle of operation
Principle of operation with hot water and a heating sys-
tem.
The heating medium side and the domestic hot water
side must be fitted with the necessary safety equipment
in accordance with the applicable regulations.
EXPLANATION
EB15 Indoor module (VVM S320 / VVM 320)
-EB15
-QM40
-EB101
-XL1
-QZ2
-FL10
-XL2
-QM1
6 NIBE F2120
IT'S IN OUR NATURE
positioning
• Place F2120 outdoors on a solid level base that can
take the weight, preferably a concrete foundation. If
concrete slabs are used they must rest on asphalt or
shingle.
• The lower edge of the evaporator must be at the level
of the average local snow depth. The concrete
foundation or concrete plinths must therefore be at
least 70 mm high.
• F2120 should not be positioned next to noise sensitive
walls, for example, next to a bedroom.
• Also ensure that the placement does not inconveni-
ence the neighbours.
If there is a risk of snow slip from roof, a protective roof
• F2120 must not be placed so that recirculation of the
or cover must be erected to protect the heat pump,
outdoor air can occur. This causes lower output and
pipes and wiring.
impaired efficiency.
• The evaporator must be sheltered from direct wind / ,
which negatively affects the defrosting function. Place
F2120 protected from wind / against the evaporator.
• Small amounts of condensation water, as well as melt
water from defrosting, may be produced. Condensa-
tion water must be led off to a drain or equivalent.
• Care must be exercised so that the heat pump is not
scratched during installation.
NIBE F2120 7
IT'S IN OUR NATURE
LIFT FROM THE STREET TO THE SET UP LIFT FROM THE PALLET TO FINAL
LOCATION POSITIONING
If the base allows, the simplest thing is to use a pallet Before lifting remove the packaging and the securing
truck to move the F2120 to the set up location. strap to the pallet.
The centre of gravity is offset to one side (see print on Place lifting straps around each machine foot. Lifting
the packaging). from the pallet to the base requires four persons, one
for each lifting strap.
C:a 180 kg
Approx. 180 kg Supplied components
Local differences in the enclosed kit may occur. See
relevant installer manual for more information.
F2120-8, F2120-12
LEK
LEK
F2120-16, F2120-20
LEK
LEK
LEK
8 NIBE F2120
IT'S IN OUR NATURE
Installation area
The distance between F2120 and the house wall must
be at least 350 mm. Clearance above F2120 must be at
least 1,000 mm. Free space in front must be at least
1,000 mm for any future servicing.
350 mm
400 mm 600 mm
400 mm 600mm
600
600 mm
mm
Minimum free
Minimalt MinimumMinimalt
free space
space
fritt utrymme fritt utrymme
Min. avstånd
Minimum distance during use
vid användning
1000 mm
NIBE F2120 9
IT'S IN OUR NATURE
Installation
• The insulation must seal against the bottom of the
Inspection of the condensation water trough.
Condensation water
trough Frost proof
Frostfritt djup
depth
The condensation water trough collects and leads away
most of the condensation water from the heat pump.
It is important for the heat pump’s function that the
condensation water is led away and that the outlet for
the condensation water pipe is positioned so as to pre-
vent damage to the building. Condensation run-off
should be checked regularly, especially during the au- LEK
10 NIBE F2120
IT'S IN OUR NATURE
F2120
Joint
The condensation water is lead to an indoor drain (sub- The outlet of the condensation water pipe must be at
ject to local rules and regulations). frost free depth.
Route the pipe downward from F2120. Route the pipe downward from F2120.
The condensation water pipe must have a water seal to The condensation water pipe must have a water seal to
prevent air circulation in the pipe. prevent air circulation in the pipe.
KVR 10 spliced as illustrated. Pipe routing inside house If none of the recommended alternatives is used good
not included. lead off of condensation water must be assured.
NIBE F2120 11
IT'S IN OUR NATURE
WATER VOLUMES
Depending on the size of your F2120, an available water
volume is required to prevent short operating times and
to enable defrosting. For the optimum operation of
F2120, a minimum available water volume of 10 litres
multiplied by the size number is recommended. E.g.
F2120-12: 10 litres x 12 = 120 litres. This applies indi-
vidually to heating and cooling systems.
12 NIBE F2120
IT'S IN OUR NATURE
IN
11 Art.nr.
711453
10 -8
9
8
LEK
7
6
5 XL2
4
3
2
1
0
0 0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7 0,75 0,8 0,85 0,9 XL1 Connection, heating medium out of F2120
Flöde Flow
[l/s]
(l/s) XL2 Connection, heating medium in to F2120,
DOCKING
F2120 can be connected in several ways. The necessary
safety equipment must be installed in accordance with
current regulations for all docking options.
See nibe.eu/ODM for more detailed docking options.
NIBE F2120 13
IT'S IN OUR NATURE
Electrical connections
• The heat pump must not be connected without the
permission of the electricity supplier and must be
connected under the supervision of a qualified electri-
cian.
• If F2120 is fused with a miniature circuit breaker, it
must have at least motor characteristic ”C”. For MCB
size see "Technical Specifications".
• F2120 does not include an omnipolar circuit breaker
on the incoming power supply. The heat pump’s
supply cable must be connected to a circuit breaker
with at least a 3 mm breaking gap. When the building
is equipped with an earth-fault breaker, the heat pump
should be equipped with a separate one. The earth-
fault breaker should have a nominal tripping current
of no more than 30 mA. Incoming supply must be
400V 3N~ 50Hz via electrical distribution units with
fuses.
For 230V~ 50Hz, the incoming supply must be 230V~
50Hz via distribution box with fuses.
• If an insulation test is to be carried out in the building,
disconnect the heat pump.
• If the control is to be supplied separately from other
components in the heat pump (e.g. for tariff connec-
tion), a separate operating cable must be connected
to terminal block (X5).
• The routing of cables for heavy current and signals
should be made out through the cable glands on the
heat pump's right-hand side, seen from the front.
• The communication cable must be a three core,
shielded cable and be connected between F2120 ter-
minal block X22 and the control module.
• Connect the charge pump to the control module. See
where the charge pump is to be connected in the In-
staller Manual for your control module.
14 NIBE F2120
IT'S IN OUR NATURE
F2120 F2120
When your heat pump is located outdoors some external KEEP FREE OF SNOW AND ICE
maintenance is required.
Insufficient maintenance can cause serious damage to
F2120, which is not covered by the guarantee.
F2120
Regularly check throughout the year that the grille is not
clogged by leaves, snow or anything else.
LEK
Also check that the drain holes in the bottom panel (ten) Prevent snow from building up and covering the grilles and drain holes
on F2120.
are free from dirt and leaves.
Regularly check that condensation is routed away cor-
rectly through the condensation pipe. Ask your installer
for assistance if required.
F2120
LEK
NIBE F2120 15
IT'S IN OUR NATURE
16 NIBE F2120
IT'S IN OUR NATURE
Functions
When connection to NIBE indoor module / control
module (VVM / SMO) is ready, you can control your unit Hot water production
via the indoor module / control module.
Hot water charging starts when the temperat-
ure has fallen to the set start temperature. Hot
Control, general water charging stops when the hot water
temperature at the hot water sensor has been reached.
The indoor temperature depends on several different
factors. Sunlight and heat emissions from people and For temporary higher hot water demand, there is a
household machines are normally sufficient to keep the function that allows the temperature to be raised tem-
house warm during the warm seasons. When it gets porarily for up to 12 hours or by a one time increase
colder outside, the climate system needs to help heat (can be selected in the menu system).
the house. The colder it is outside, the warmer radiators It is also possible to put the installation in holiday mode,
and underfloor heating systems have to be. which means that the lowest possible temperature is
Control of the heat production is performed based on maintained without the risk of freezing.
the "floating condensing" principle, which means that
the temperature level needed for heating at a specific
outdoor temperature is produced based on collected
Additional heat only
values from the outdoor and supply temperature
ADDITIONAL HEAT ONLY
sensors. The room sensor can also be used to com-
pensate the deviation in room temperature. The indoor module (VVM), which is connected to F2120,
can be used with the additional heat alone (electric
Heat production boiler) to produce heating and hot water, for example
before the outdoor module is installed.
The supply of heat to the house is regulated in
accordance with the heating curve setting se-
lected. After adjustment, the correct amount
Alarm indications
of heat for the current outdoor temperature is supplied. The status lamp lights red in the event of an alarm and
The supply temperature of the heat pump will oscillate the display shows detailed information depending on
around the theoretically required value. the fault. An alarm log is created with each alarm con-
taining a number of temperatures, times and operating
OWN CURVE status.
F2120 has pre-programmed non-linear heating curves.
It is also possible to create your own defined curve. This
is an individual linear curve with a number of break
points. You select break points and the associated
temperatures.
NIBE F2120 17
IT'S IN OUR NATURE
RANGE OF SERVICES
You have access to different levels of service via NIBE
Uplink. A basic level that is free and a premium level
where you can select different extended service func-
tions for a fixed annual subscription fee (the subscription
fee varies depending on the selected functions).
NIBE Uplink also available as an app from App Store and
Google Play.
18 NIBE F2120
IT'S IN OUR NATURE
Technical data
F2120-16 / F2120-20 working range
Working area Arbetsområde F2120-16 / F2120-20
Supply temperature
Framledningstemperatur
(°C)
(°C)
F2120-8 working range 75
Arbetsområde F2120-8 70
Supply temperature 65
Framledningstemperatur
(°C) 60
75 55
70 50
65 45
60 40
55 35
50 30
45 25
40 20
35 15
30 10
25 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45
20 Utomhustemperatur
Outdoor temperature
15 Supply temperature
Framledningstemperatur (°C)
(°C)
10 Return temp
Returledningstemperatur
-30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45
Outdoor temperature
Utomhustemperatur
Supply temperature
Framledningstemperatur (°C)
(°C) F2120 working range cooling
Return temp
Returledningstemperatur
Framledningstemperatur
Supply temperature
(°C)
(°C)
F2120-12 working range 35
Arbetsområde F2120-12
Framledningstemperatur
Supply temperature 30
(°C)
(°C)
75
25
70
65
60 20
55
50 15
45
40 10
35
30 5
25 10 15 20 25 30 35 40 45
20 Outdoor temperature
Utomhustemperatur
15 Framledningstemperatur
Supply temperature (°C)
(°C)
10 Returledningstemperatur
Return temp
-30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45
Outdoor temperature
Utomhustemperatur
Supply temperature
Framledningstemperatur (°C)
(°C) During shorter time it is allowed to have lower working
Return temp
Returledningstemperatur temperatures on the water side, e.g. during start up.
NIBE F2120 19
IT'S IN OUR NATURE
F2120-12
Heating F2120-12 Max
F2120-12 maxochand
min min
uppvärmningskapacitet
heating capacity
OUTPUT AND COP AT DIFFERENT SUPPLY Heating capacity
Uppvärmningskapacitet
(kW)
(kW)
TEMPERATURES 10
9
Maximum capacity during continuous operation. Defrost-
8
ing is not included.
7
F2120-8 6
5
F2120-8 Max
F2120-8 maxochand
min min
uppvärmningskapacitet
heating capacity 4
Uppvärmningskapacitet
Heating capacity 3
(kW)
(kW) 2
7 1
6 0
-25 -20 -15 -10 -5 0 5 10 15
5 Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (35°C) (35 °C) (°C)
(°C)
4 Framledningstemperatur
Supply temperature (45°C) (45 °C)
3 Supply temperature (55°C) (55 °C)
Framledningstemperatur
2
F2120-12 COP
1 F2120-12 COP
0 COP
COP
-25 -20 -15 -10 -5 0 5 10 15 7
Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (35°C) (35 °C) (°C)
(°C) 6
Supply temperature (45°C) (45 °C)
Framledningstemperatur
Supply temperature (55°C) (55 °C) 5
Framledningstemperatur
4
F2120-8 COP 3
F2120-8 COP
2
COP
COP
6 1
5 0
-25 -20 -15 -10 -5 0 5 10 15
4 Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (35°C) (35 °C) (°C)
(°C)
3 Framledningstemperatur
Supply temperature (45°C) (45 °C)
Framledningstemperatur
Supply temperature (55°C) (55 °C)
2
0
-25 -20 -15 -10 -5 0 5 10 15
Utomhustemperatur
Outdoor temperature
Supply temperature (35°C) (35 °C)
Framledningstemperatur (°C)
(°C)
Supply temperature (45°C) (45 °C)
Framledningstemperatur
Supply temperature (55°C) (55 °C)
Framledningstemperatur
20 NIBE F2120
IT'S IN OUR NATURE
F2120-16 F2120-20
F2120-16
F2120-16 Max
maxochand
min uppvärmningskapacitet
min heating capacity F2120-20
F2120-20 Max
maxochand
min uppvärmningskapacitet
min heating capacity
Uppvärmningskapacitet
Heating capacity Uppvärmningskapacitet
Heating capacity
(kW)
(kW) (kW)
(kW)
14 18
12 16
14
10
12
8 10
6 8
6
4
4
2 2
-25 -20 -15 -10 -5 0 5 10 15 -25 -20 -15 -10 -5 0 5 10 15
Utomhustemperatur
Outdoor temperature Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (35°C) (35 °C) (°C)
(°C) Framledningstemperatur
Supply temperature (35°C) (35 °C) (°C)
(°C)
Framledningstemperatur
Supply temperature (45°C) (45 °C) Framledningstemperatur
Supply temperature (45°C) (45 °C)
Supply temperature (55°C) (55 °C)
Framledningstemperatur Supply temperature (55°C) (55 °C)
Framledningstemperatur
5 5
4 4
3 3
2 2
1 1
0 0
-25 -20 -15 -10 -5 0 5 10 15 -25 -20 -15 -10 -5 0 5 10 15
Utomhustemperatur
Outdoor temperature Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (35°C) (35 °C) (°C)
(°C) Supply temperature (35°C) (35 °C)
Framledningstemperatur (°C)
(°C)
Supply temperature (45°C) (45 °C)
Framledningstemperatur Supply temperature (45°C) (45 °C)
Framledningstemperatur
Supply temperature (55°C) (55 °C)
Framledningstemperatur Supply temperature (55°C) (55 °C)
Framledningstemperatur
NIBE F2120 21
IT'S IN OUR NATURE
Kylningskapacitet
Cooling
(kW)
capacity
(kW)
10,0
OUTPUT AT DIFFERENT SUPPLY
9,0
TEMPERATURES (COOLING)
8,0
F2120-8Max
F2120-8 maxochand min cooling capacity
min kylningskapacitet
7,0
Kylningskapacitet
Cooling capacity 6,0
(kW)
(kW)
6,0 5,0
5,5 4,0
5,0 3,0
4,5
2,0
4,0 15 20 25 30 35 40 45
3,5 Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (25°C) (25 °C) (°C)
(°C)
3,0
Framledningstemperatur
Supply temperature (18°C) (18 °C)
2,5
Supply temperature (7°C) (7 °C)
Framledningstemperatur
2,0
1,5
1,0
15 20 25 30 35 40 45
Utomhustemperatur
F2120-20 max
F2120-20 Max och and min cooling capacity
min kylningskapacitet
Outdoor temperature
Framledningstemperatur
Supply temperature (25°C) (25 °C) (°C)
(°C) Kylningskapacitet
Cooling capacity
Framledningstemperatur
Supply temperature (18°C) (18 °C) (kW)
(kW)
Framledningstemperatur
Supply temperature (7°C) (7 °C) 11,0
10,0
9,0
8,0
F2120-12
F2120-12 max
Max ochand min cooling capacity
min kylningskapacitet
7,0
Kylningskapacitet
Cooling capacity 6,0
(kW)
(kW) 5,0
7,0 4,0
3,0
6,0
2,0
5,0 1,0
15 20 25 30 35 40 45
Utomhustemperatur
Outdoor temperature
4,0
Framledningstemperatur
Supply temperature (25°C)(25 °C) (°C)
(°C)
3,0 Framledningstemperatur
Supply temperature (18°C)(18 °C)
Supply temperature (7°C) (7 °C)
Framledningstemperatur
2,0
1,0
15 20 25 30 35 40 45
Utomhustemperatur
Outdoor temperature
Framledningstemperatur
Supply temperature (25°C) (25 °C) (°C)
(°C)
Framledningstemperatur
Supply temperature (18°C) (18 °C)
Framledningstemperatur
Supply temperature (7°C) (7 °C)
22 NIBE F2120
IT'S IN OUR NATURE
Dimensions
F2120-8
F2120
180
1030
475
110
70
Ø52
35 - 65
1055 40 470 65 85
Ø40
610
1130
F2120
180
1130
475
110
70
Ø52
35 - 65
1205 40 470 65 85
Ø40
612
1280
NIBE F2120 23
IT'S IN OUR NATURE
LEK
2m
6m
10 m
F2120 8 12 16 20
Sound power level (LWA), according to EN12102 at 7 / 45 (nominal) LW(A) 53 53 55 55
Sound pressure level (LPA) at 2 m* dB(A) 39 39 39 39
Sound pressure level (LPA) at 6 m* dB(A) 29.5 29.5 29.5 29.5
Sound pressure level (LPA) at 10 m* dB(A) 25 25 25 25
* Free space.
24 NIBE F2120
IT'S IN OUR NATURE
Technical specifications
F2120 – 1x230V 8 12
Output data according to EN 14511, partial load1) Outdoor temp./ Sup-
ply temp.
Heating -7 / 35 °C 5.17 / 1.72 / 3.00 7.35 / 2.43 / 3.02
Capacity / Power input / COP (kW/kW/-) 2 / 35 °C 4.03 / 0.91 / 4.43 5.21/ 1.22 / 4.27
at nominal flow 2 / 45 °C 4.07 / 1.16 / 3.51 5.27 / 1.49 / 3.54
7 / 35 °C 3.57 / 0.78 / 4.57 3.54 / 0.69 / 5.12
7 / 45 °C 3.66 / 0.98 / 3.74 3.64 / 0.91 / 4.00
Electrical data
Rated voltage 230V ~ 50Hz
Max operating current, heat pump Arms 14 16
Max operating current, compressor Arms 13 15
Max output, fan W 40 45
Fuse Arms 16 16
Enclosure class -
Refrigerant circuit
Type of refrigerant R410A
GWP refrigerant 2088
Type of compressor Scroll
Volume kg 2.4 2.6
CO2-equivalent (The cooling circuit is hermetically sealed.) t 5.01 5.43
Brine
Max airflow m3/h 2,400 3,400
Min/Max air temp, max °C -25 / 43
Miscellaneous
Weight (excl. packaging) kg 150 160
Substances according to Directive (EG) no. 1907/2006, article 33 (Reach) Lead in brass components
Part No. 064 134 064 136
NIBE F2120 25
IT'S IN OUR NATURE
F2120 – 3x400V 8 12 16 20
Output data according to EN 14511, partial load1) Outd. temp: / Supply
temp.
Heating -7 / 35 °C 5.17/1.72/3.00 7.35/2.43/3.02 10.13/3.33/3.04 13.50/4.70/2.87
Electrical data
Rated voltage 400V 3N ~ 50Hz
Max operating current, heat pump Arms 6 7 9.5 11
Max operating current, compressor Arms 5 6 8.5 10
Max output, fan W 40 45 68 80
Fuse Arms 10 10 10 13
Enclosure class -
Refrigerant circuit
Type of refrigerant R410A
GWP refrigerant 2088
Type of compressor Scroll
Volume kg 2.4 2.6 3 3
CO2-equivalent (The cooling circuit is hermetically sealed.) t 5.01 5.43 6.26 6.26
Brine
Max airflow m3/h 2,400 3,400 4,150 4,500
Min/Max air temp, max °C -25 / 43
Heating medium
Max system pressure heating medium MPa 0.45 (4.5 bar)
Recommended flow interval, heating operation l/s 0.08/0.32 0.11/0.44 0.15/0.60 0.19/0.75
Min. design flow, defrosting (100 % pump speed) l/s 0.27 0.35 0.38 0.48
Min/Max HM temp continuous operation °C 26 / 65
Connection heating medium F2120 G1 1/4" external thread
Connection heating medium flex pipe G1 external thread G1 1/4" external thread
Min. recommended pipe dimension (system) DN (mm) 20 (22) 25 (28) 25 (28) 32 (35)
Miscellaneous
Weight (excl. packaging) kg 167 177 183
Substances according to Directive (EG) no. 1907/2006, article 33 (Reach) Lead in brass components
Part No. 064 135 064 137 064139 064 141
26 NIBE F2120
IT'S IN OUR NATURE
1)Power statements including defrosting according to EN 14511 at heating medium supply corresponding to DT=5 K at 7 / 45.
2)Nominal flow corresponds to DT=10 K at 7 / 45.
NIBE F2120 27
IT'S IN OUR NATURE
Accessories
Detailed information about the accessories and complete
accessories list available at nibe.eu.
Not all accessories are available on all markets.
Condensation water pipe
Condensation water pipe, different lengths.
1 metres
28 NIBE F2120
PBD EN 1943-5 M11996
NIBE Energy Systems
Box 14, SE-285 21 Markaryd
nibe.eu
WS name: -Gemensamt
WS version: a697
WS release date: 2019-09-24 14:33
Publish date: 2019-10-14 07:59
This product sheet is a publication from NIBE Energy Systems. All product illustrations,
facts and data are based on current information at the time of the publication’s approval.
NIBE Energy Systems makes reservations for any factual or printing errors in this product
sheet.