Professional Documents
Culture Documents
Questions
Questions
The main advantage of ‘PVC’ pipes for drainage is the feasibility of—
(Ans : A)
(Ans : A)
3. Soil erosion by wind brings about the serious damage in soil by changing the—
(Ans : C)
4. High compression petrol engines are used in some tractors and have high performance in—
(Ans : A)
(Ans : D)
6. A 2- row potato harvester, working in good conditions with 4 to 5 men on the machine, can do how
much hectare per day ?
(A) 0.5-0.6 ha (B) 1.2-1.4 ha
(Ans : B)
(Ans : A)
8. Which is not included in the sources of energy, getting for agricultural work ?
(Ans : D)
(Ans : B)
10. In our country, for the manufacturing of agricultural implements tools, mostly wood is used, because
—
11. Which of the following wood is not used for making handle of spade ?
(Ans : A)
12. Soil turning plough makes the furrow of which type (shape) ?
(Ans : B)
13. Which of the following is one (single) handed soil turning plough ?
(Ans : B)
(A) Soil clods breaking and suppressing in soil (B) Eradication of weeds
(Ans : D)
(C) To pulverize the soil (D) All above three functions (Ans : C)
16. Bakhar is generally used in—
(C) Vindhya Pradesh (D) In all the States/parts of India (in All India)
(Ans : B)
(Ans : D)
(Ans : D)
19. The term ‘Olpad’ in ‘Olpad Thresher’ is named on the name of—
(Ans : B)
(Ans : D)
(Ans : B)
(Ans : D)
(A) Where soil is wet (B) Where clods are present in soil
(Ans : D)
(C) For covering the sown-seeds by earth (D) For making ridges
(Ans : C)
(Ans : B)
27. The minimum expenditure is incurred by implements for sowing seeds among the following—
(Ans : D)
28. Which of the following tool is used for measuring the draft of agricultural implements?
(Ans : A)
29. Which of the following does not affect the draft of ploughs ?
(Ans : C)
(Ans : B)
31. Which of the following is used maximum for lifting water from wells ?
(Ans : A)
32. Which of the following is used for lifting water from 8-10 m depth ?
(Ans : D)
33. In which implement. Bullocks are not used for lifting water ?
(Ans : C)
(Ans : B)
(C) Ploughing by putting furrow from one side of field (D) Ploughing by halai making
(Ans : D)
(C) Ploughing by making halai (D) Ploughing by making furrow from one side of field
(Ans : C)
37. How much is the working efficiency of dibbler (ha per day) ?
(Ans : A)
(A) Ploughing of land (B) Keep the land free from weeds
(C) Make the soil levelled (D) All of the above operations
(Ans : D)
(Ans : D)
40. Wrought iron contains carbon (per cent) —
(Ans : A)
41. The mould-board of a tractor drawn soil turning plough is the type of—
(Ans : D)
(Ans : B)
(Ans : A)
(Ans : B)
45. How many m.m. are in one foot length ?
(Ans : A)
(Ans : D)
47. A general farmer used deshi plough for the purpose of—
(Ans : D)
48. Which of the following is best for driving machine from low power to slow speed ?
(Ans : A)
(A) Cutting a crop (B) To separate straw etc. From threshed lank
(Ans : B)
(Ans : D)
53. Sugarcane juice is extracted (%) from canes through bullock-drawn cane-crusher—
(Ans : D)
(A) Oil extraction from mustard, toria etc. (B) Extracting juice from cane
(C) Threshing of wheat, barley, pea etc. (D) All (A), (B) and (C)
(Ans : C)
55. ‘Seed dresser’ is used for—
(A) Mixing/treating seeds with chemicals (B) Sowing seeds at proper distance
(C) Making seeds of high grade (D) Keeping seeds effective upto longer period (Ans : A)
(Ans : B)
(Ans : D)
58. Which type of saw, used for cutting round shape in hole ?
(Ans : D)
(A) To fit galua in grinder (B) Making round the corners of wood
(Ans : B)
60. The tool used for making deep pit in wood is—
(Ans : D)
(A) For cutting the wood (B) For scrapping the wood
(Ans : C)
(C) Forcing the wood (D) Making equal by scrapping the wood
(Ans : D)
(Ans : A)
(Ans : C)
(Ans : B)
Ans : (E)
(C) Converting into desired shape by beating the iron (D) Beating iron and making hole in it (Ans : C)
(A) Beating the iron on keeping over this (B) By beating iron through this
(C) Heating iron through handling this (D) Cooling of hot iron
(Ans : A)
(Ans : A)
(C) Cut the iron in cold condition (D) Cut the iron in hot condition
(Ans : A)
(Ans : A)
73. The tool use for catching (handling) the claw and turning it hither and thither during beating is called
—
76. A three-tine furrow plough is ploughing at a speed of 2 km/hr and the each furrow size is 20 cm wide
and 12 cm deep furrow. How much time, it would require to plough 5 hectare land ?
(Ans : A)
77. If a gear ‘A’, having 50 teeth and running at a speed of 200 r.p.m. is driving to another gear ‘B’ having
125 r.p.m. How many number of teeth in gear’ B’ ?
(C) 80 (D) 60
(Ans : C)
(Ans : C)
79. A 10 cm wide belt is running at a speed of 900 r.p.m. If the 15 H. P. is available, then how much plies
of belt ?
(A) 3 (B) 10
(C) 6 (D) 4
(Ans : D)
80. How much width belt would be needed if 20 H. P. is to be transferred through a belt of 10 plies,
where speed of belt is 1460 r.p.m. ?
(A) 4 cm (B) 8 cm
(C) 5 cm (D) 6 cm
(Ans : B)
81. A 10 cm wide belt, having the speed of 1350 meter per minute, would be appropriate to transfer the
how much H. P. ?
(A) 20 (B) 15
82. A tractor driving pulley has its 25 cm diameter and revolving at a speed of 960 r.p.m. If on the shaft
of a thresher, an attached pulley is revolving at a speed of 1600 r.p.m. what would be the diameter of
this pulley ?
(A) 16 cm (B) 15 cm
(C) 12 cm (D) 20 cm
(Ans : C)
83. A pulley of 21 cm diameter and revolving at 1600 r.p.m. Find out the speed of the belt running over
it—
(Ans : B)
84. If the distance between two pullies, having the diameter of 45 cm and 39 cm, is 3.2 metre, then what
would be length of required flate belt ?
85. Two pair of bullocks are ploughing a field by victory ploughs at a speed of 2 km/hr. If the average
width of each furrow is 25 cm. How much time will be required to plough one hectare land? Where after
each two hours working, 20 minutes rest is required to provide ?
(Ans : C)
86. If the relative distance is 2.5 metre of centre points of two pullies, having SO cm and 25 cm
diameters, then, how much length (metre) of ‘V’ belt would be required ?
(Ans : D)
(Ans : A)
88. If the rate of electricity is rupee one per unit, then, a 20 h. P. Electric motor, having approx. 100%
efficiency will require how much cost (Rs.) on 100 hours running to irrigate the field ?
(Ans : C)
89. ‘Drip’ irrigation is generally followed in the country—
90. In India, under canal net-work system of irrigation, generally, how much amount of water is allowed
to run in small canal ?
(Ans : D)
92. The Torque—a power to generate revolutions is expressed as (its unit is kg metre) —
(A) Length of arm (m) x Force (kg) (B) Length of arm (cm) x Force (kg)
(C) Length of arm (m) x Force (g) (D) Length of arm (rom) x Force (mg)
(Ans : A)
(A) Work = Force (kg) x Distance (m) (B) Work = Force (g) x Distance (m)
(C) Work = Force (mg) x Distance (m) (D) Work = Force (kg) x Distance (cm)
(Ans : A)
(Ans : A)
(C) 20 ft (D) 90 ft
(Ans : A)
(Ans : D)
(A) 5 mm (B) 10 mm
(Ans : A)
(Ans : A)
(Ans : A)