Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Dipole Antenna: Dipole Aerial

The dipole antenna or dipole aerial is one of the most fundamental


antenna elements.

Dipole Antennas Include:


Dipole antenna basics     Current & voltage     Half wave dipole     Folded dipole     Short dipole     
Doublet     Dipole length     Dipole feeds     Radiation pattern     Build HF ham dipole     Inverted V
dipole     FM dipole design    

The dipole antenna or dipole aerial is one of the most important forms of RF antenna. The dipole can
be used on its own, or it can form part of a more complicated antenna array.

The dipole aerial or antenna is widely used on its own, but it is also incorporated into many other RF
antenna designs where it forms the radiating or driven element for the overall antenna.

The dipole is relatively simple in its basic implementation and many of the basic calculations are
quite straightforward. It is easy to design a basic dipole antenna that will operate on the HF, VHF
and UHF sections of the radio frequency spectrum. That said, in depth mathematical analysis can
require more complicated mathematical methods.

Dipole antenna basics


The name 'di-pole' indicates that the dipole antenna consists of two poles or items – two conductive
elements.

Current flows in these two conductive elements and the current and the associated voltage causes
an electromagnetic wave or radio signal to be radiated outwards from the antenna.

Basic dipole antenna


As seen the antenna consists of a radiating element that is split into two separate conductor. These
are normally on the same axis, and the dipole antenna is normally split in the centre. Power from a
transmitter may be applied to be radiated, or power picked up by the antenna may be connected to a
receiver. Normally the receiver or transmitter is connected to the dipole antenna via an intermediate
feeder which enables the power to be transferred from one point to another.

The length of the radiating elements determine many of the properties of the dipole antenna: its feed
impedance, centre operating frequency, whether it is a resonant antenna, etc.. As such the dipole
length is an important aspect of the dipole antenna parameters.

Basic half wave dipole antenna


Dipole types
The most common form of the dipole antenna is the half wave dipole which gains its name because
its length corresponds to an electrical half wavelength. However many other types of dipole antenna
re also available.

 Half wave dipole antenna:   The half wave dipole antenna is the one that is most widely
used . This type of dipole antenna is resonant, operating at a point where it is an electrical half
wavelength long.
Read more about . . . . Half wave dipole.

 Multiple half waves dipole antenna:   Although the half wave dipole antenna is the most
popular, it is possible to use a dipole antenna or aerial that is an odd multiple of half wavelengths
long. The radiation pattern is very different, but it still operates effectively in this mode.
 Folded dipole antenna:   As the name implies this form of the dipole aerial or dipole
antenna is folded back on itself. Another half wave conductor is added in parallel with the original
dipole elements so that one end is connected to the other presenting an DC short circuit. While
still retaining the length between the ends of half a wavelength, the additional conductor enables
the folded dipole to provide a higher feed impedance and wider bandwidth, both of which can be
advantageous in many circumstances.
Read more about . . . . Folded-dipole.

 Short dipole:   As the name implies, the short dipole antenna is one where the length is
much shorter than that of half a wavelength. Where a dipole antenna is shorter than half a
wavelength, the feed impedance starts to rise and its response is less dependent upon frequency
changes. Its length also becomes smaller and this has many advantages.
Read more about . . . . Short-dipole.

 Non-resonant dipole:   A dipole antenna may be operated away from its resonant
frequency and fed with a high impedance feeder. This enables it to operate over a much wider
bandwidth.
Dipole antenna applications
Dipole antennas are used in many areas, both on their own and as part of more complicated
antennas where they can form the main radiating element.

The dipole construction will depend upon the frequency, and also the way in which it will be used.

 HF wire dipole:   The dipole was widely used as a wire antenna at MF and HF where its
performance enabled signals to be transmitted and received on these frequencies. Even today
the wire dipole is frequently used for HF transmitting as in the case of amateur radio, etc.
Typical example of an HF band
dipole used for amateur radioTypically the dipole was used as a half wave dipole, but on some
frequencies a 3λ/2 version was also convenient as it enabled the dipole to be used at the
fundamental frequency as well as at three times this frequency.
 Part of Yagi antenna:   The dipole antenna forms the driven element within a Yagi antenna.
Often a folded dipole is used because the 'parasitic' elements within the Yagi cause the dipole
feed impedance to fall. Using a folded dipole typically ensures the impedance match is improved.
 As omnidirectional vertical dipole:   The dipole antenna is often used on its own as a
vertically polarised antenna (in this case the dipole itself is vertical rather than the more usual
horizontal format) to provide omnidirectional coverage. Often it may be used in this fashion for
private mobile communications.
 Driven element within a parabolic reflector:   Parabolic reflector antennas need some
form of driven element to radiate the antenna for the reflector to direct it in the required direction.
Although a variety of radiating antenna types can be used, one option is the dipole antenna.

The dipole antenna is a particularly important form of RF antenna which is very widely used for radio
transmitting and receiving applications. The dipole is often used on its own as an RF antenna, but it
also forms the essential element in many other types of RF antenna. As such it is the possibly the
most important form of RF antenna.

    NEXT PAGE    
  

Share 13

You might also like