DUSTRON SERIES
High Capture Velocity
Other dust booths depend on air suction velocity of only 140 FPM,
while a regain air booth can generate positive velocities of over
400 FPM. The Dustron’s fully adjustable Regain Air System
provides working area velocities of 400/800 FPM. The timer-
controlled, automatic self-cleaning system consisting of solenoids,
dump valves, a programmable logic controller (PLC) and blow-
down pipes assures that the booth maintains consistent capture
velocity
Efficient, Quiet Operation
Low speed, high flow blowers have airfoil blades for high fan
efficiency as well as low noise. Noise levels are also minimized
with sound-insulated blower chamber, ductwork and Regain Air
plenum,
Ultra-Efficiency Nanofiber Filters
Rated at MERV 15 efficiency, the Dustron's nanofiber cartridge
filters operate at a 40-60% lower pressure drop than traditional
cartridge medias, resulting in lower energy consumption and a
longer fiter life. Cartridges are vertically oriented to provide even,
full-capacity fiter loading and cleaning. The pulse filter cleaning
system uses a solid-state programmable logic controller (PLC) to
provide reliability and flexibility
FILTER J
Ta
Enhancing the
Work Environment
Solid Construction: | Standard
booth built with 18 gauge steel
walls and ceiling. High-Density
Insulation: Sound-absorbing mats
of two-inch fiberglass compressed
to one inch applied to inside
surfaces of booth. Outer Layer:
Further enhancement of sound
attenuation with 5 mil. aluminized
vinyl impregnated fiberglass cloth
covering of mat with Class 2 fire-
retardant treatment.
Integral Lighting: Sealed and
gasketed dust-tight flourescent
lights. Clean Air Curtain: Clean,
filtered air from the Regain Air
plenum pushes contaminants away
from the breathing zone, pro\
improved visibility as well as
promoting comfort and health
1-800-289-0189
easeDUSTRON SERIES
The 99.9% Efficient Dust Collector Booth
Standard Specifications
Conridge Size 42:75°Dia. X30" Long
Carige Area Each Caridge 2501
Gauge of Dust Colecior Cabin. 1244 ga. Carton Stel
Gauge of Booth 1 99. Gab. Carbon Sao
Bower Motor 208-200/460060°3 TEFC
Number a Valves ‘por 2 Cartidgos
Face Velocity Crested by Sucton.. 160 FPM
Face Velocity Crested by Regain A... 400800 FPM
Regain A. ‘Autti rom 050%
Dust Drawer Capac an
Lighting “4 Seated Fucescont
Numb of Light Fires #2, 1053, 12-4, 16-6, 26-7,
30-8
Compressed A Required {60 PSIG Clean, Dry A
Motor Stator inctuded
Fito Meda Utra-Efency Nonofber Mecia
Fitor Gearing Sytem By Sole-Sate PLE
n Sound Conte Fboias Compressed and Quits
CREO ones Sa \w/S.a Aumieized Vy
ree ae 7 Imprograted Fiberoass
Eats Ug YK gga S00 Cloth Cover w/ Ut. Class 2 Fr
DB-10-14-7.5 90"K8'X 10" 14-3500 Retardant Treatment
DB-12-18-15 90" 8'X 12" 18- 4500 Finish Indust! Blue Enamel
DB-16-24-2x7.5 90" 8'X 16 24-6000
DB-20-28-2x7.5 90" x 8'X20' 28-7000 Options
DB-24-36-2x15 90" 8'X 24" 36-9000 + Auger /Yacuton Dust Removal + Crane Slot
DB-30-42-3x7.5 90" 8'X 30’ 42 -10500 + hightemperature GutOf + Open Top
+ Texas Twister Spark Trap + Removable Top
“Up 70 Whe: Consult Facoy er Custom Dmenaions {VEC For Sof- Star and Low STitUp Top
Fritor 1 has a poly of cantins design impovemant and reser Velocty During Cleaning “HEPA Afr Fiters
the ight update designs and specications wat notice + Unlimited with and Depth + Carbon Ate Fiters
Clean
ficieney ftraton system
ns 80% o- more of the fired
Fr tothe plant envconment
Recreulated clean ai pushes dust
toward inet, creating capture velosty
(0400+ FPM, compared to a ma
Ambient Air :
‘Air outside the booth is drawn Contaminants:
into the ar seam and cyeled ‘Slower pls ty ir hrough the
Trough the itration system, oletinto the carvdge iter, removing
4 % submeren paris
FILTER J ==