Professional Documents
Culture Documents
Wellhead Trim Guide API 19
Wellhead Trim Guide API 19
The user is ultimately responsible for the selection of Material Classes and Temperature Ratings of equipment. at WGPC Houston with any
questions about the use
of this information
(832) 325-4200
AA
CO2 below 7 psia &
DD-0,5
CO2 below 7 psia &
DD-NL
API service: API service: API service: CO2 below 7 psia &
H2S below 0.05 psia H2S 0.05 to 0.5 psia H2S above 0.5 psia
general API material requirements for this material class general API material requirements for this material class general API material requirements for this material class
Non-Corrosive alloy bodies & bonnets, alloy internal parts low alloy NACE bodies & bonnets, low alloy NACE internal parts low alloy NACE bodies & bonnets, low alloy NACE internal parts
alloy tubing hanger mandrels & stems low alloy NACE tubing hanger mandrels & stems low alloy NACE tubing hanger mandrels & stems
*SS can be used for internal parts, tubing hanger mandrels, or stems *SS can be used for internal parts EXCEPT tubing hanger mandrels & stems
CO2
BELOW 7 psia WG Products WG Products WG Products
Wellhead, Tbg Head: AA Wellhead, Tbg Head: EE-NL Wellhead, Tbg Head: EE-NL
based on Adpt, Tee, Tree Cap: AA Adpt, Tee, Tree Cap: EE-NL Adpt, Tee, Tree Cap: EE-NL
flowing pressure Valves 5M & below: AA Valves 5M & below: DD-NL Valves (all) chk w/ eng - trims vary by model & working pressure
Valves 10M & up: BB w/ 17-4 SS stem Valves 10M & up: EE-0,5 w/ 17-4 SS stem Tbg Hgr: DD-NL (low alloy 80 ksi max)
Tbg Hgr: AA (low alloy 110 ksi) Tbg Hgr: DD-NL (low alloy 80 ksi max) *use HH-NL (Inconel) tbg hanger if >80 ksi req'd
*use FF-0,5 (17-4 SS) tbg hanger if >80 ksi req'd
Customer has the option to specify materials for ZZ Material Class Customer has the option to specify materials for ZZ Material Class
BB
CO2 7 to 30 psia &
EE-0,5
CO2 7 to 30 psia &
EE-NL
API service: API service: API service: CO2 7 to 30 psia &
H2S below 0.05 psia H2S 0.05 to 0.5 psia H2S above 0.5 psia
Slightly Corrosive general API material requirements for this material class general API material requirements for this material class general API material requirements for this material class
alloy bodies & bonnets, SS internal parts low alloy NACE bodies & bonnets, SS NACE internal parts low alloy NACE bodies & bonnets, SS NACE internal parts
SS tubing hanger mandrels & stems SS tubing hanger mandrels & stems CRA NACE tubing hanger mandrels & stems
CO2
7 to 30 psia WG Products WG Products WG Products
Wellhead, Tbg Head: AA . Wellhead, Tbg Head: EE-NL Wellhead, Tbg Head: EE-NL
based on Adpt, Tee, Tree Cap: AA Adpt, Tee, Tree Cap: EE-NL Adpt, Tee, Tree Cap: EE-NL
flowing pressure Valves (all): BB Valves (all): EE-0,5 w/ 17-4 SS stem Valves (all): EE-NL w/ Inconel stem
Tbg Hgr: CC (17-4 SS) Tbg Hgr: FF-0,5 (17-4 SS) Tbg Hgr: HH-NL (Inconel)
Customer has the option to specify materials for ZZ Material Class Customer has the option to specify materials for ZZ Material Class
CC
CO2 above 30 psia
FF-0,5
CO2 above 30 psia
FF-NL
API service: API service: API service: CO2 above 30 psia
H2S below 0.05 psia H2S 0.05 to 0.5 psia H2S above 0.5 psia
general API material requirements for this material class general API material requirements for this material class general API material requirements for this material class
SS bodies & bonnets, SS internal parts SS NACE bodies & bonnets, SS NACE internal parts SS NACE bodies & bonnets, SS NACE internal parts
SS tubing hanger mandrels & stems SS NACE tubing hanger mandrels & stems CRA NACE tubing hanger mandrels & stems
API 6A recommends PSL's to the user for various service conditions, for the customer to use in specifying his requirements to the manufacturer.
No No
No 10,000 # PSL 2
Working
Pressure
5,000 # and lower PSL 1