Dynapak Natural Gas Sampling System: Field-Proven Design, Reliable Results

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DynaPak® Natural Gas Sampling System

Field-Proven Design, Reliable Results

DynaPak natural gas sampling system delivers a representative


sample of natural gas or light liquids. Based upon a reliable standard
design, this pipeline mounted system uses a pneumatically-operated
positive displacement pump, YZ filter/regulator, and a low-powered
solenoid valve. The pump can be actuated by pipeline gas or
instrument air which passes through a filter/regulator to a 12 VDC
solenoid valve and can be operated at pipeline pressures between
0.69 bar (10 psig) and 103.4 bar (1,500 psig). Dynapak system’s
field-proven design provides a dependable, representative sample
month-after-month, year-after-year.

Features and Benefits


• Intrinsically safe for use in hazardous environments
• System diagnostics to enhance dependability
• Onboard controller for proportional-to-flow or time-based operation
• Factory assembled for ease of installation

Options
• Direct or remote mounted sample pumps
• Sample accumulator capacities: 150, 300, 500, 1000 cc
• Pneumatic actuation
• Severe service elastomers

Specifications
Maximum operating pressure 124 bar (1,500 psig)

Pump displacement: 0 to 0.4 cc/stroke

Operating temperature range 17°C to 60°C (0°F to 140°F)1

Power supply Internal battery pack*

Flow signal Dry contact or voltage pulse

*The external power options can be used in lieu of the internal battery pack. See manual for details
1
At temperatures below 0°C (32°F) conditioning of the actuation gas supply may be required.
Operations at extreme temperatures may affect system performance.

© 2015 Accudyne Industries. All rights Reserved. 1 an Accudyne Industries brand


an Accudyne Industries brand

System Schematic

Cable Entry Fitting Solenoid Valve


Z-65 Controller 6" (15cm)

8" (20cm)

DynaPak 2000 Pump

Sample Discharge
YZ SYSTEMS, INC. Tubing

Sample Discharge

Purge Valve

Isolation Valve
Filter/Regulator

Probe Body Assembly

Note: Wiring and Pneumatic Tubing Not


Shown For Drawing Clarity

Sample Inlet

Literature #59203.00
© 2015 Accudyne Industries. All rights Reserved. 2

You might also like