Professional Documents
Culture Documents
Car Camera Setting
Car Camera Setting
Recommended Tools
Product Features
Wrench Wire Strippers Wire Cutters Electrical Tape
Install Time
Screw Driver Panel Removal Tool Zip Ties Socket Set 1hr 30m - 2hr
Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE
Kit Contents
Kit A Components for installing the TRNS-2100
Kit Contents:
1x Video Mirror
2x 10m 4-Pin Video Harness
1x 20m 4-Pin Video Harness
1x Power harness
2x External Video Connectors
1x Coiled 4-Pin Harness
Part 5 Installing the Rear Trailer Camera Harness and Trailer Plug
1. Using the larger 20m (65 ft) cable harness,
connect to the 4-pin connector of the
camera and run to the front of the trailer. We
recommend running along the ceiling or under
the body along the frame.
2. Zip tie the cable up along the frame rails. Some
trailers have holes cut into the frame rail for
factory wiring, try to follow these.
3. Make sure to use the male-ended plug for the
trailer. (If the wrong one is used the plug will not
be correct for the camera.)
4. Connect the 4-pin harness(s) to the appropriate
trailer connector
FAQ Section