Professional Documents
Culture Documents
SMD Meter: User 'S Manual
SMD Meter: User 'S Manual
Safety Note
1.Introduction The Meter is a handheld and battery operated very The following safety notes should be observed
SMD METER 2.Safety note convenient small Tool, that is specially used to prior to using this Meter and any associated
3.Explanation of Controls and Indicators measuring SMD(Surface Mounting Device),there accessory.Although the Meter do not used to
3-1.Product Illustration are resistor, Capacitor, Diode, Zener and LED, measuring to exceed Safety Voltage ,but
3-2.Push Buttons Moreover, the Meter have the continuity checking there are situations where hazardous conditi
USER’S MANUAL 3-3.LCD display function And batery power Measurement. -on may be present.
4.Specification The Meter is designed to meet IEC1010-1 standard ● Inspect the Meter case before using.Do
4-1.General Feature and Stipulation of 2-Pollution Grade. Not use damaged device.
4-2.Electrical Specification The Meter conform to the European Union‟s ● Inspect the Pin Holder and Pin gold
5.Testing Operation following Requirement:CE regulation 89/336 -plated state.
MODEL: 990B 5-1.Resistance Measurement (EMC Electromagnetic Compatibility). ● Do not attempt use the Meter as tweezers
5-2.Capacitance Measurement The entire outer surface of the Meter case has been to prevent the pin tip from damage.
5-3.Diode Check with thermo plastic elastomer, and the two testing ● Do not used in the environment with
5-4.Continuity Check pins has been gold-plated, so that it is reduce pin explosive gas,vapor,or dust.
5-5. Zener/LED Measurement contact resistance and prevent to get rusty.
5-6. Battery Power Measurement This operating instruction covers information on Caution
6.Maintenance safety and caution,so please read relevant Never use the Meter on alive circuits .
6-1.Replacing The Battery information carefully and observe all the warming
6-2.Cleaning and note strictly.