Professional Documents
Culture Documents
Color Monitor: Service Manual
Color Monitor: Service Manual
Color Monitor: Service Manual
COLOR MONITOR
SERVICE MANUAL
CHASSIS NO. : LM13I
MODEL: 19M37A
CAUTION
BEFORE SERVICING THE UNIT,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CONTENTS .............................................................................................. 2
PRECAUTION............................................................................................3
SERVICING PRECAUTIONS.....................................................................4
SPECIFICATIONS......................................................................................6
ADJUSTMENT .........................................................................................16
BLOCK DIAGRAM...................................................................................20
• There are some special components used in LCD monitor that BE CAREFUL ELECTRIC SHOCK !
are important for safety. These parts are marked on the
• If you want to replace with the new backlight (CCFL) or LIPS
schematic diagram and the Exploded View. It is essential
part, must disconnect the AC power because high voltage
that these critical parts should be replaced with the
appears at inverter circuit about 650Vrms.
manufacturer’s specified parts to prevent electric shock, fire or
other hazard.
• Handle with care wires or connectors of the inverter circuit. If
• Do not modify original design without obtaining written the wires are pressed cause short and may burn or take fire.
permission from manufacturer or you will void the original parts
Leakage Current Hot Check Circuit
and labor guarantee.
AC Volt-meter
CAUTION
Please use only a plastic screwdriver to protect yourself
from shock hazard during service operation.
Diode Removal/Replacement
1. Remove defective diode by clipping its leads as close as
possible to diode body.
2. Bend the two remaining leads perpendicular y to the circuit
board.
3. Observing diode polarity, wrap each lead of the new diode
around the corresponding lead on the circuit board.
4. Securely crimp each connection and solder it.
5. Inspect (on the circuit board copper side) the solder joints of
the two "original" leads. If they are not shiny, reheat them and if
necessary, apply additional solder.
Copyright © 2010 LG Electronics. Inc. All right reserved. -5- LGE Internal Use Only
Only for training and service purposes
SPECIFICATIONS
1. General Specification
Length : 1.5m
Signal Cable Shape : Detachable Type
Refer to BOM
(D-SUB) Color : Black
Pin : Triple Row, 15 Pin D-Sub
Length : 1.5m
Shape : Detachable Type
DVI Do not Support
Color : Black
8 Cable Pin : Triple Row, 18-Position DVI-D
Average
120(min)
Luminance Cool
2 (Full white pattern, 0.7V)
(cd/m )
Luminance
75%(min),
Uniformity
4. Engineering Specification
Test condition
1. 1366×768
@ 60Hz
18W (typ) 2. burst patter
On Mode On/On Active White
22W(max) n
3. 100~240V
4. After aging
30min
Off/On
White
Sleep Mode On/Off Off < 0.3W
Blinking
Off/Off
Off Mode
- - Off < 0.3W
(Power switch off)
Efficiency up to: -Test Condition
Smart Energy Saving Low/High/Off On White Low:15%±5%(≥1W)
(1)
High:25%±5%(≥2W)
7 MTBF 30,000 HRS with 90% Lamp Life : 30,000 Hours(Min)
Confidence level
8 Using Altitude 5,000 m (for Reliability) 3,000m(for FOS)
BRIGHTNESS 0 ~ 100
WARM
PRESET MEDIUM
COOL
RED
COLOR TEMP
USER GREEN
BLUE
WIDE
ORIGINAL RA
TIO ORIGINAL
MENU
(Monitor b
lock) BLACK LEVE BLACK LEVEL enabl
▶ HIGH / LOW
L e at HDMI input
OSD
MENU LANGUAGE ▶ ENGLISH 17 Language:
English, Germanic, F
rench, Spanish, Italia
n, Swedish, Finnish,
Portuguese Brazilian
Portuguese, Polish,
Russian, Greek, Chi
nese, Japanese, Kor
FACTORY RE ean, Ukrainian
▶ NO( /YES )
SET Hindi
CHANNEL
2~69(AIR) / 1 ~ 125(CABLE)
ADD/DEL CH ADD/DELETE
CHANNEL No Support:
MENU AUTO CHANNEL ON/OFF
(AV/TV bl
SELECT AIR/CABLE
ock)
FINE TUNE 0 ~ 100
CONTRAST 0~100
ADJUSTMENT No Support:
BRIGHTNESS 0~100
SHARPNESS 0~100
COLOR 0~100
TINT 0~100
VOLUME 0~100
BASS 0~100
TREBLE
0~100
AUDIO No Support:
MUTE ON/OFF
SOUND
MONO/STEREO
LANGUAGE▶ English/German/French/Espe
ranto
Italian/Korean…
SETUP No Support:
IMAGE SIZE ▶ FULL/1:1
OSD POSITION
TRANSPARENCY 0~100
Active Display Area of the LCD Monitor Should be within Cabinet’s Bezel .
| A-B|<1.0 mm , | C-D|<1.0 mm
Active area
A A B
Bezel
5 Revision Analog : 03 03
6 Serial Number * *
7 Week ** **
8 Model Name LG HD --
9 Check Sum **** ****
10 Special Item Need to Input Serial Number
V id e o
B
C
S yn c
D E F
A
DOT Front
Total Displa Syn Back Resol-
CLOC Frequency Porc
mode section polarity Period( y c. Porch ution
K [kHz]/[Hz] h
E) (A) (C) (B)
[MHz] (D)
H(Pixels) - 31.468 900 720 18 108 54
1 28.321 720 X 400
V(Lines) + 70.08 449 400 12 2 37
H(Pixels) - 31.469 800 640 16 96 48
2 25.175 640 x 480
V(Lines) - 59.94 525 480 10 2 33
H(Pixels) - 37.5 840 640 16 64 120
3 31.5 640 x 480
V(Lines) - 75 500 480 1 3 16
H(Pixels) + 37.879 1056 800 40 128 88
4 40.0 800 x 600
V(Lines) + 60.317 628 600 1 4 23
H(Pixels) + 46.875 1056 800 16 80 160
5 49.5 800 x 600
V(Lines) + 75.0 625 600 1 3 21
H(Pixels) - 49.725 1152 832 32 64 224
6 57.283 832 x 624
V(Lines) - 74.55 667 624 1 3 39
H(Pixels) - 48.363 1344 1024 24 136 160
7 65.0 1024 x 768
V(Lines) - 60.0 806 768 3 6 29
H(Pixels) + 47.712 1792 1366 70 143 213
8 85.5 1366 x768
V(Lines) + 59.79 798 768 3 3 24
7
KC(EMC) MIC Ordinance 825
MIC Notice 100,Class B, NEED
Electric Article Technical Standard Ⅲ
CCC GB4943, GB9254, GB17625.1 NEED
8 Etc
(China)
T-Con 5V
RGB IIC
- 20 -
RTD2280LJ
(Realtek)
R/G/B/H/V
RGB
BLOCK DIAGRAM (Main)
SPI LED
Data/ (RED)
CLK Key1/Key2
SERIAL
Flash
6 Keys : Power/MENU/Function
/SES/AUTO/EXIT
No power issue
NO
Check JK300 PIN 1 CHECK ADAPTER
YES
NO
Is IC300 CHECK IC300
PIN1(19V),PIN2(5V)
YES
NO
Is IC 300
PIN9(3.3V). CHECK IC300
YES
NO
Is IC100 PIN1,PIN2 `
CHECK CRYSTAL X100
PULSE
CHECK IC100
YES
IC100 PIN1,2 NO 1.CHECK X100
2. Trouble in IC100
14.318MHz
YES
CHECK IC100
PIN7(H-SYNC),PIN6
NO CHECK CONNECTION From DSUB
(V-SYNC) TO IC100
YES
NO CHECK CONNECTION From DSUB TO
Is IC100 PIN16
IC100
PULSE
Trouble in DPM
YES
NO
IC100 PIN7,6 CHECK H/V SYNC LINE
YES
Trouble in IC100
520 510
200
330
900
or 910
540