Professional Documents
Culture Documents
HAPPY HCH Masine Katalog
HAPPY HCH Masine Katalog
HAPPY HCH Masine Katalog
HCH-701-30 HCS2-1201-30
Basic Specification(1) HCH-701-30 HCS2-1201-30
Target User Home use / Shop / Embroidery beginner Factory (Industrial use)
/ Hobby (semi-professional use) Shop (Professional use)
Maximum speed (r.p.m.) 1,000 r.p.m. (600 r.p.m. for Cap) 1,000 r.p.m (750 r.p.m. for cap)
Control Panel 7inch TFT touch screen panel 7inch TFT touch screen panel
USB port 2x USB ports (USB stick/USB mouse) 2x USB ports (USB stick/USB mouse)
Standard frames 1 x Round Frame PTA -15-360 1 x Round Frame PTA -15-360
1 x Square Frame PTA-32320-360
1 x Square Frame PTA-32320-360
Round frame PTA-12-360 Round frame PTA-12-360
Optional frames Round Frame PTA -15-360
Round Frame PTA -15-360
Round frame PTA-18-360
Round frame PTA-18-360
Round frame PTA-21-360
Round frame PTA-21-360 Square Frame PTA-32320-360
Square Frame PTA-32320-360 Wide cap frame (290 x 67mm)
Wide cap frame (290 x 67mm) Low-profile cap frame (180x 67mm)
Low-profile cap frame (180 x 67mm) One-point frame(S) (40 x 55mm)
One-point frame(S) (40 x 55mm) One-point frame(L) (76 x 55mm)
Sock frames
One-point frame(L) (76 x 55mm)
Sock frames
642x745x734mm (WxLxH) 42kg (assembled) 642x745x734mm (WxLxH) 42kg (assembled)
Size and weight 500x900x700mm (WxLxH) 56kg(packed in box)
500x900x700mm (WxLxH) 56kg(packed in box)
New functions and Improved points
(Comparison with HCS2-1201-30)
Easy threading
②
④
③ ①
①
⑤ ③
⑥ ②
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
Gauge insert opening on outer cover
・Insertion opening for gauge of take –up lever timing adjustment is created on outer
cover.
・You can do timing adjustment job without opening both sides of cover.
This feature will be adapted to Model HCS2 in near future.
Thread trim by motor control
HCH-701-30 HCS2-1201-30
Motor control for thread trim function from cam control
・Moving knife movement control is done by motor instead of cam.
・Adjustment of moving knife position and opening timing become easier than cam
control.
This feature will be adapted to Model HCS2 in near future.
1st needle position detect
HCH-701-30 HCS2-1201-30
Registration of 1st needle position
・When machine power is turned ON, moving head moves to 1st needle position and
registers 1st needle position automatically.
・Positioning encoder is eliminated and maintenance job become easier.
Needle plate positioning pin
HCH-701-30 HCS2-1201-30
Add needle plate positioning pin
・Needle plate position is fixed by positioning pin and hole on needle plate.
・By screwing needle plate, position of needle and needle hole match without adjustment.
Note: Cap frame set of HCS2-1201 can be used for HCH-701, but needle plate for cap
should be exchanged to needle plate with hole for positioning pin (Parts No. HCB04087)
This feature will be adapted to Model HCS2 in near future.
Fixing out cover by screw
HCH-701-30 HCS2-1201-30
Fixing outer cover by screw
・Bottom part of outer cover fixing is changed for screw fixing from engagement of claw
on cover.
・Opening covers for maintenance become easier.
This feature will be adapted to Model HCS2 in near future.
Built-in 100 small designs
HCH-701-30 HCS2-1201-30
HCH-701-30 HCS2-1201-30
Shaft support for Y axis frame movement
・Y axis frame movement is supported by shaft drive mechanism in stead of ball bearing
guide which is used for HCS2 model.
・Durability and heavy weight material support are inferior to ball bearing guide.
Maximum speed comparison
Stitch length Stitch length
10.0
11.0
12.0
12.7
10.0
11.0
12.0
12.7
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
1000 1000
HCH 900 HCH
900
HCS2 HCS2
800 B/6needle 800
B/6needle
Maximum speed
500 500
400 400
300 300
200 200
100 100
0 0
Maximum speed related to stitch length is almost same as B/10needle machine, but
inferior to HCS2 model