Isométricos para Masa

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

23/5/2021 ¡Isométricos para masa!

| T NATION

MENÚ
(https://www.t-nation.com/)

¡Isométricos para masa!


Cómo crecer sin mover un músculo

p o r C h r i s t i a n T h i b a u d e a u ( h t t p s : / / w w w. t - n a t i o n . c o m / a u t h o r / c h r i s t i a n - t h i b a u d e a u / ) | 1 4 d e
m a y o d e 2 0 0 4 ( h t t p s : / / w w w. t - n a t i o n . c o m / t r a i n i n g / i s o m e t r i c s - f o r - m a s s / )

C AT E G O R I Z A D O B A J O C A PA C I TA C I Ó N

¡SOSTÉNLO JUSTO AHÍ!


¿Puedes fortalecerte sin mover un músculo? De acuerdo con la literatura científica, sí, ¡seguro que puedes! Se ha
demostrado que el entrenamiento isométrico o "estático" estimula las ganancias de fuerza en numerosos estudios. En
el mundo real, lo he estado usando con éxito durante años en mi propio entrenamiento y con mis atletas.

But can isometric training increase muscle mass as well as strength? There’s very little info out there on this topic. In
fact, the literature seems to be telling us that isometrics can lead to strength gains without influencing muscle mass. So,
understandably, this form of training never made it into the bodybuilding world. That’s too bad because it can be an
effective tool for muscle gains!

ISOMETRIC ACTION TRAINING: A NEW DIMENSION


An isometric muscle action refers to exerting muscle strength/muscle tension without producing an actual movement or
a change in muscle length. Examples of isometric action training include:

https://www.t-nation.com/training/isometrics-for-mass/ 1/11
23/5/2021 ¡Isométricos para masa! | T NATION

1. Holding a weight at a certain position in the range of motion. Example: Holding a hammer curl statically at about mid-
range for a certain amount of time.
MENÚ
(https://www.t-nation.com/)

2. Pushing or pulling against an immovable external resistance. Example: The iso-pull shown below.

Historically, it’s believed that we can produce more strength in a maximum isometric action than in a concentric
contraction. While some studies do find a slight difference, Soviet literature concludes “…there is not a statistically
significant difference between the maximum strength, as measured in a static regime, and the maximum weight that can
be lifted in the same movement.” (1)

While probably not as effective as yielding (https://www.t-nation.com/training/accentuated-eccentric-training) or


overcoming training, isometric training can still be of significant benefit to most athletes.

ISOMETRIC ACTION: MUSCLE ACTIVATION POTENTIATOR


One of the most important benefits of isometric action training is that it’s the contraction regimen that leads to the
greatest activation level. “Activation” refers to the recruitment of the muscle’s motor-units.

A recent study comparing the level of muscle activation during isometric, concentric, and eccentric muscle actions found
that a person can recruit over 5% more motor-units/muscle fibers during a maximal isometric muscle action than during
either a maximal eccentric (lowering) or maximal concentric (lifting) action; that’s 95.2% for isometric compared to
88.3% for the eccentric and 89.7% for the concentric. (2)

https://www.t-nation.com/training/isometrics-for-mass/ 2/11
23/5/2021 ¡Isométricos para masa! | T NATION

MENÚ
(https://www.t-nation.com/)

(https://biotest.t-

nation.com/products/alpha-male?
utm_source=tnation&utm_medium=article&utm_campaign=alpha_male_legal_tbooster)

These findings are in accordance with the body of literature that finds that a person can recruit almost all motor-units
during a maximal isometric action. (3) What this tells us is that isometric training can improve our capacity to recruit
motor units during a maximal contraction. In the long run, this improved neural drive could greatly increase one’s
strength production potential!

In the past, isometric exercises have been described as a technique that should only be used by advanced lifters. I beg
to differ. One of the biggest shortcomings of lower-class lifters is the incapacity to produce maximum intramuscular
tension during a concentric contraction. Isometric exercise can thus be used to learn how to produce this high level of
tension, as it requires less motor skills than the corresponding dynamic action. For this reason, I see isometric exercises
as very beneficial for all classes of athletes.

A STIMULUS FOR STRENGTH GAINS


Isometric action training (or IAT) can lead to significant strength gains, no question about that. In a recent experiment,
strength gains of 14 to 40% were found over a ten-week period using isometric training.

However, it’s important to understand that the strength gains from an isometric regimen occur chiefly at the joint angles
being worked, although there’s a positive transfer of 20 to 50% of the strength gained in a 20-degree range (working
angle +/- 20 degrees). (5)

Some people might see this limitation as a negative aspect of isometric action training; however, some authors prefer to
see this as a benefit because it allows you to exert a greater level of strength at a certain point in the motion, allowing
the athlete to stimulate more strength gains at a point where he needs it the most (his sticking point).

So, the three benefits of isometric training can be summed up like this:

1. Maximum intramuscular tension is attained for only a brief period in dynamic exercises (mostly due to the fact that the
resistance has velocity and acceleration components), while in isometric exercises you can sustain that maximal
tension for a longer period of time. For example, instead of maintaining maximum intramuscular tension for 0.25 to 0.5
seconds in the concentric portion of a dynamic movement, you can sustain it for around three to six seconds during
an isometric exercise. Strength is greatly influenced by the total time under maximal tension. If you can add 10 to 20
seconds of maximal intramuscular tension per session, then you increase your potential for strength gains.

2. Isometric exercises can help you improve strength at a precise point in the range of motion (ROM) of an exercise.
This can prove to be very valuable to get past plateaus due to a chronic sticking point.

3. Isometric exercise isn’t “energy expensive,” meaning that you don’t expend much energy by doing isometric training.
So, you can get the benefits of IAT without interfering with the rest of your planned workout.

https://www.t-nation.com/training/isometrics-for-mass/ 3/11
23/5/2021 ¡Isométricos para masa! | T NATION

A STIMULUS FOR MUSCLE GROWTH


MENÚ 
While initial reports on isometric action training(https://www.t-nation.com/)
hypothesized that this type of training wouldn’t lead to significant muscle
gains due to the absence of work, recent findings indeed conclude that an isometric training regimen can lead to gains
in muscle size!

A study by Kanchisa et al. (2002) found an average muscle cross-sectional area (size) improvement of 12.4% for
maximal isometric contraction training and of 5.3% for isometric training at 60% of maximum contraction after a training
period of ten weeks. The authors attributed the gain in muscle size to metabolic demands and endocrine activities
rather than mechanical stress and neuromuscular control.

It’s important to note that isometric action training still has limited applications for an athlete or bodybuilder. Yes, it can
help increase strength and size, but without a concurrent dynamic (yielding and overcoming) program, the gains will be
slow. In fact, some coaches note that gains from isometric exercises stop after six to eight weeks of use. (6) So while
isometric training can be very helpful to work on a weak point or improve an athlete’s capacity to activate motor-units, it
should only be used for short periods of time when progress has slowed down or when a rapid strength improvement is
needed.

Isometric training can also be useful during periods of lowered training volumes. When you have to decrease your
training load either due to fatigue symptoms or time constraints, isometric work can help prevent muscle and strength
losses.

THE “NEW” ISOMETRIC TRAINING


Many studies don’t report a lot of muscle growth from isometric training. This is only because the old German model
(Hettingter and Müller) of six-second actions was used in the initial experiments. This duration of effort, albeit adequate
for strength gains, isn’t sufficient to cause hypertrophic changes in the muscles. In other words, it won’t make you big.

This form of training is called maximal intensity isometric training and it’s similar in effect to the maximal effort method
(1-5 reps with 90-100% of your max), which leads to strength gains with little, if any, muscle size gains. However, using
sets lasting 20 to 60 seconds will represent an important hypertrophy stimulus, similar in nature to the repetitive effort
method (8-12 reps with 70-80% of your maximum).

Another important point is that most studies performed on isometric training were short term, often using an insufficient
period to stimulate a significant increase in muscle mass but sufficient to cause neural adaptations leading to strength
gains.

Lastly, the fact that isometric training is often associated with programs such as the “Charles Atlas Dynamic Tension”
certainly didn’t help improve the image of isometrics among hardcore lifters!

TYPES OF ISOMETRIC TRAINING


Before I tell you how to use isometrics to gain muscle, it’s important that you understand the various types of isometric
training. First we have two isometric regimens: overcoming isometrics and yielding isometrics. Understand that this
doesn’t mean you’re combining a concentric (or eccentric) action along with the isometric action. The actual external
outcome of the exercise is the same: there’s no movement at all. However, the intent during the exercise changes:

1. Overcoming Isometric: You’re pushing or pulling against an immovable resistance (e.g. pushing against the pins in a
rack). Thus there’s no external movement but your intent is to move the resistance (even though that’s impossible).

https://www.t-nation.com/training/isometrics-for-mass/ 4/11
23/5/2021 ¡Isométricos para masa! | T NATION

2. Yielding Isometric: You’re holding a weight and your objective is to prevent it from going down. Once again there’s no
external movement; however, your intent is no longer to move the load but to prevent its movement.
MENÚ
(https://www.t-nation.com/)

It’s important to understand that both techniques won’t have the same effect; for one thing, the neural patterns used in
both cases will be different. Overcoming-isometrics may have a bigger impact on concentric strength and yielding-
isometrics on eccentric strength and muscle mass.

The following figure shows what the various applications of isometric training are. The three types of applications are
max duration isometrics (equivalent of the repetitive effort method), max intensity isometrics (equivalent of the maximum
effort method), and ballistic isometrics (equivalent of the dynamic effort method). I’ll briefly summarize all three of those
applications, but for bodybuilding purposes, only the max duration method is useful.

MAX DURATION ISOMETRIC (REPETITIVE EFFORT)

With max duration isometric exercises you’re pushing, pulling, or holding a submaximal load for as long as possible,
going to muscle failure. For maximum effect you want to use sets ranging from 20 to 60 seconds in length. The effect of
this type of training on muscle mass can be important as there’s a very significant growth stimulus placed on all of the
muscle fibers.

With this method you can use both overcoming-isometrics and yielding-isometrics. However, I find yielding isometrics
(holding a weight) to be much superior when it comes to max duration isometric training. In this case, a load of 50 to
80% for a duration of 20 to 60 seconds is best.

MAX INTENSITY ISOMETRIC (MAXIMUM EFFORT)

The max intensity isometric method is related to the concentric maximum effort method. You’ll try to maintain a
maximum isometric action for 3-6 seconds. You can once again use either overcoming-isometrics or yielding-isometric,
but in this case overcoming isometrics (pushing or pulling against pins or an immovable resistance) are best suited for
that purpose and much safer.

This type of isometric training doesn’t have a significant impact on muscle mass, however, it can increase muscle
density and myogenic tone (also called “tonus” or the firmness/hardness of your muscles). Its main effect is on
maximum strength development. This occurs specifically at the joint angle being trained, so you’ll want to use multiple

https://www.t-nation.com/training/isometrics-for-mass/ 5/11
23/5/2021 ¡Isométricos para masa! | T NATION

positions. There’s also some evidence that maximum isometric training can improve the capacity to recruit and
synchronize motor-units (intramuscular coordination) even in dynamic movements.
MENÚ
(https://www.t-nation.com/)

Even though overcoming-isometrics are best for this method, you can still use yielding-isometrics. In this case you’d use
a load of 100 to 110% of your maximum.

BALLISTIC ISOMETRIC (DYNAMIC EFFORT METHOD)


Be careful not to mix up iso-ballistic (or stato-ballistic) training with the ballistic isometric method. Iso-ballistic is a mixed
regime method in which an explosive action is preceded by an isometric pause.

The ballistic isometric method refers to pushing against an immovable resistance for a very brief period of time (one or
two seconds) while trying to reach peak force output as fast as possible (basically trying to go from zero force to max
force in a couple of seconds). You can’t use the yielding-isometric method here as it doesn’t suit the nature of the
exercise – the nature being to produce maximum isometric tension is as little time as possible.

This type of exercise is especially good to develop starting-strength and is very useful for any athlete involved in a sport
where explosive starts from a static position are involved. But for bodybuilding purposes, it’s basically a waste of time.

ISOMETRIC TRAINING FOR BODYBUILDERS


We’ve established that the only application of isometric training that bodybuilders should use is the maximum duration
method, with a preference towards yielding-isometrics. That having been said, I personally use three variants of this
type of training:

1. Stand-alone max duration yielding isometrics.

2. Max duration yielding isometrics as post-fatigue.

3. Max duration yielding isometrics as pre-fatigue.

Let’s break those down:

1 – STAND-ALONE MAX DURATION YIELDING ISOMETRICS


This is your basic isometric training method. You select one exercise per muscle group and then three positions per
exercise. Select a load you’ll be able to hold for 20-60 seconds (I personally find 45 seconds to be the optimal duration).
A load of 70-80% of your maximum will generally be a good starting point.

Perform anywhere from one to five “sets” per position, three being best in most cases:

1. Hold statically at mid-range.

2. Hold statically at full contraction.

3. Hold statically a few inches after the starting position.

Perform all the “sets” for a given position before moving on to the next one. Keep the rest intervals short; 60 seconds is
a good target. This type of training is especially effective when training with a partner: you can try to outlast one another
and even make a betting game out of it! Just don’t make a drinking game out of it or things could get messy.

https://www.t-nation.com/training/isometrics-for-mass/ 6/11
23/5/2021 ¡Isométricos para masa! | T NATION

2 – MAX DURATION YIELDING ISOMETRICS AS POST-FATIGUE


at the end of a regular set. After you’re finished with your prescribed 
MENÚ
With this variant you’re using yielding isometrics
(https://www.t-nation.com/)
number of reps, hold the mid-range position of the exercise for 20-60 seconds. The 60-second mark is a bit idealistic
though; most will have a hard time reaching the 20-second mark!

The great thing about this method is that it’ll thoroughly exhaust all your muscle fibers, providing a phenomenal growth
stimulus. However, it’s a very taxing method and you should never perform it for more than one exercise per muscle (if
you use post-fatigue on all sets) or for more than one set per exercise (if you wish to use it with all of your exercises).

3 – MAX DURATION YIELDING ISOMETRICS AS PRE-FATIGUE


I’m not a big fan of using pre-fatigue methods as they’ll hamper strength gains. However, pre-fatigue can be a good tool
to stimulate muscle gains. Only use it on isolation exercises or for minor muscle groups so that you can still train heavy
on compound movements. This method is especially effective for biceps, triceps, traps and deltoids.

What you’re going to do is basically a superset: combine the stand-alone max duration yielding isometrics with regular
training. So you succeed every “set” of max duration yielding isometrics with a concentric/eccentric exercise for the
same muscle group.

For example:

Isometric preacher curl for max time – Use a load that’s challenging (i.e. a load you’d struggle to do for more than
three perfect reps.) Hold the weight at a determined position for as long as you can or for at least 45-60 seconds. Use
three different positions: elbows at 90 degrees, elbows fully flexed, and two inches from the bottom position. Perform
two sets for each position.
Standing barbell curl – After each set of isometric preacher curls for max time, perform one set of 10 barbell curls.
Don’t worry about tempo; just complete the reps with as much weight as you can.

You’re basically going to do six sets of 10 barbell curls.

Here’s what it’ll look like:

1. Isometric preacher – Elbows 90 degrees for max time – no rest

2. Barbell curl x 10 reps – 45-60 seconds rest

3. Isometric preacher – Elbows 90 degrees for max time – no rest

4. Barbell curl x 10 reps – 45-60 seconds rest

5. Isometric preacher – Elbows fully flexed for max time – no rest

6. Barbell curl x 10 reps – 45-60 seconds rest

7. Isometric preacher – Elbows fully flexed for max time – no rest

8. Barbell curl x 10 reps – 45-60 seconds rest

9. Isometric preacher – Elbows almost fully extended – no rest

10. Barbell curl x 10 reps – 45-60 seconds rest

https://www.t-nation.com/training/isometrics-for-mass/ 7/11
23/5/2021 ¡Isométricos para masa! | T NATION

11. Isometric preacher – Elbows almost fully extended – no rest


MENÚ 
12. Barbell curl x 10 reps – 45-60 seconds rest (https://www.t-nation.com/)

This variation will produce rapid gains in muscle size and is especially useful in correcting specific weaknesses in your
physique.

CONCLUSION
These three methods will allow you to reach a new level of muscularity in a short period of time. However, understand
this doesn’t take the place of regular training. It should be seen as a supplementary training method only, but with
proper application it’ll make your training more effective than ever!

REFERENCES
1. A.S. Medvedyev 1986.

2. Babault et al. 2001.

3. Allen et al. 1995, Allen et al. 1998, Belanger and McComas 1981, De Serres and Enoka 1998, Gandevia et al. 1998,
Gandevia and McKenzie 1988, Merton 1954, Newham et al. 1991, Yue et al. 2000.

4. Kanchisa et al. 2002.

5. Roman 1986, Kurz 2001.

6. Medvedyev 1986.

TA G S B o d y b u i l d i n g ( h t t p s : / / w w w. t - n a t i o n . c o m / t a g / b o d y b u i l d i n g / ) , T r a i n i n g ( h t t p s : / / w w w. t - n a t i o n . c o m / t a g / t r a i n i n g / )

https://www.t-nation.com/training/isometrics-for-mass/ 8/11
23/5/2021 ¡Isométricos para masa! | T NATION

MENÚ The Best Workout Plan for 


(https://www.t-nation.com/) Natural
Lifters by Christian
Thibaudeau - 37 pages
(Digital)
$9.99

Add to cart

6 Weeks of Planned Chaos For NEW Muscle


Growth
Contents
Why You Can't Train Like a Juicer
Stimulating More Protein Synthesis — Naturally
Explicación del mejor plan de entrenamiento para
levantadores naturales
Estoy aqui para entrenarte
Fase 1 - Entrenamientos de las semanas 1-3
Fase 2 - Entrenamientos de las semanas 4-6
El plan de alimentación para levantadores
naturales
Tómese una semana libre y desarrolle más
músculo

CHRISTIAN THIBAUDEAU (HTTPS://WWW.T-NATION.COM/AUTHOR/CHRISTIAN-THIBAUDEAU/)


Christian Thibaudeau specializes in building bodies that perform as well as they look. He is one of the most sought-after coaches
by the world's top athletes and bodybuilders. Follow Christian Thibaudeau on Facebook
(https://facebook.com/christian.thibaudeau)

GET THE WEEKLY DOSE EMAIL

NEWSLETTER NOMBRE
IT'S FREE!
https://www.t-nation.com/training/isometrics-for-mass/ 9/11
23/5/2021 ¡Isométricos para masa! | T NATION

SUBSCRIBE

MENÚ
(https://www.t-nation.com/)

R E L AT E D P O S T S
TRAINING

The Truth About Direct Arm Training


(https://www.t-nation.com/training/the-truth-
about-direct-arm-training/)
(https://www.t- Many functional training zealots will tell you there's no need to train the biceps and
triceps directly. Here's why they're wrong... and kinda puny.
nation.com/training/the-truth-about-
direct-arm-training/) Dr John Rusin (https://www.t-nation.com/author/john-rusin/) April 27

TRAINING

Tip: The 2/1 Technique, Leg Extension


(https://www.t-nation.com/training/tip-the-2-1-
technique-leg-extension/)
Finish off your next leg day with a few sets of these. This is a great technique if
your main goal is muscle growth.
Christian Thibaudeau (https://www.t-nation.com/author/christian-thibaudeau/) January
26

FOLLOW US (http://rss.t
nation.com
nation-
(https://www.facebook.com/OfficialTesto
(https://twitter.com/t_nation)
(http://www.youtube.com/use
(http://instagram.com/
(https://www.pint
articles)

(https://www.t-nation.com/)
P r i v a c y P o l i c y ( h t t p s : / / w w w. t - n a t i o n . c o m / p r i v a c y - p o l i c y / )
C o o k i e P o l i c y ( h t t p s : / / w w w. t - n a t i o n . c o m / c o o k i e - p o l i c y / )
A f f i l i a t e L i n k P o l i c y ( h t t p s : / / w w w. t - n a t i o n . c o m / a f f i l i a t e - l i n k - p o l i c y / )
Te r m s o f U s e ( h t t p s : / / w w w. t - n a t i o n . c o m / t e r m s - o f - u s e / )
Feedback (mailto:fb@t-nation.com)
E d i t o r i a l G u i d e l i n e s ( h t t p s : / / w w w. t - n a t i o n . c o m / e d i t o r i a l - g u i d e l i n e s / )
Article Submission (mailto:articles@t-nation.com)
Do Not Sell My Personal Information

H o m e ( h t t p s : / / w w w. t - n a t i o n . c o m / )
Articles (/all-articles/)
Forums (https://forums.t-nation.com/)
V i d e o s ( h t t p s : / / w w w. t - n a t i o n . c o m / v i d e o s / )
T Nation Store (https://store.t-nation.com)
Biotest Store (https://biotest.t-nation.com/)
https://www.t-nation.com/training/isometrics-for-mass/ 10/11
23/5/2021 ¡Isométricos para masa! | T NATION

MENÚ
(https://www.t-nation.com/)

© 2 0 2 1 T N AT I O N L L C ( H T T P S : / / W W W. T- N AT I O N . C O M / ) . A L L R I G H T S R E S E R V E D

https://www.t-nation.com/training/isometrics-for-mass/ 11/11

You might also like