Professional Documents
Culture Documents
June - 2016 - 20150702 Kantech-Neo App Note
June - 2016 - 20150702 Kantech-Neo App Note
The purpose of this application note is to describe the steps required to connect a KT-400 or KT-1
access controller to the RS-232 serial connection on a 3G2080R, TL280R or TL2803GR
PowerSeries Neo communicator.
Wiring Diagram:
The RJ-12 male connector connects to the controller, while the flying leads connect directly to the
corresponding slots in the communication device.
NOTES:
The unused flying leads (blue / white / yellow) should be trimmed back to the
cable cover to avoid accidental contact
3G2080R, TL280R and TL2803GR communicators manufactured prior to 6/23/15
have a RS-422 serial connection and require the CBLK-ITV2 cable kit in order to
connect to the controller