Professional Documents
Culture Documents
Ballastguard Cip Cleaner 25 LTR
Ballastguard Cip Cleaner 25 LTR
:
Document Creation Date: 5/24/2021 4:13:15 AM UTC
Product information
Features
* Environmental friendly cleaning product (biodegradable, low toxicity, low bio-accumulation, phosphate free, non-
marine pollutant)
* High performance citric acid based scale remover with enhanced dispersing performance
* Suitable for use as CIP cleaner for Both Ballast Water UV and Electro-chlorination type system and as cleaner for
lter/pre lter
Bene ts
* Superior cleaning action for removal of scale and metal oxide
* Safer handling and less hazardous as compared to other strong acids such as sulfuric and hydrochloric based
cleaners
Speci cation
Invent Hazard Material (IMO/EU) classi cation C-34 Appearance Clear/Light Yellow
Form Liquid
pH 1-2
https://www.wilhelmsen.com/product-catalogue/products/ballastguard-cip-cleaner/?epieditmode=true 1/2
5/24/2021 BALLASTGUARD CIP CLEANER 25 LTR
Documents
IHM docs
I. Preparation:
1. Prepare BallastGuard CIP Cleaner at 1:20 ratio ( 1L: 20L Demin/Distilled/RO grade water/potable water)
4. Pre-rinse the lter to remove any contaminant (dirt, mud, sand, shells, etc) prior using the cleaning solution for
more effective cleaning.
5. Clean the screen/ lter with pressure washer from the outside surface.
1. Cleaning be done by spread, dip or spray for 1 ~ 4 hours depending on the degree of scaling appearance.
2. Rinse off/spray with running hot water (at least 60°c) until complete neutralization (pH=6.5-
7.5). Check the wash water pH.
5. If needed, repeat the cleaning step but reduce the cleaning spread, dip or spray to 30 mins
B. CIP Cleaning:
I. Preparation:
1. Prepare BallastGuard CIP Cleaner at 1:20 ratio ( 1L: 20L Demin/Distilled/RO grade water/potable water)
1. Fill the CIP cleaning tank with the prepared cleaning solution
https://www.wilhelmsen.com/product-catalogue/products/ballastguard-cip-cleaner/?epieditmode=true 2/2