OFFICER OF THE ENGINEER-IN CHIEF
MADHYA PRADESH PUBLIC WORKS DEPARTMENT
27-28 Nirman Bhawan Arera Hills, Bhopal (M.P.)
‘Website: www.mppwd.gov.in Email- pwdbhop@Mp.nic.in
Tel. No. 0755-2551485, Fax- 2556527
No. SOR/Road/Comm/2019/ 314 4 Bhopal Dated23/1//2020
‘SCHEDULE OF RATES FOR ROAD & BRIDGE WORKS
(wef, 29-08-2017) (ERRATA/AMMENDMENT/ADDENDUM NO. 09)
‘A new chapter (chapter No. 19) for pole shifting works is hereby added in the SOR for Road
and Bridge works issued by Engineer-in-Chief PWD.
‘They above addendum shall be applicable from date of issue of this order.
SNSOR DESCRIPTION OF ITEMS. Unit Rate
25.3 |Supphing of ISI Marked Switch Fuse Unit (rewirable {pe ) tiple pole with
neutral Link ,415 Volt having conduit / cable gland entry with two earthing]
terminals confirming to IS :13947(Part I & Il)
253.3 _|63 Amps. Each 3047
25.34 [100 Amps. Each 5706.
25.35 [200 Amps. Each 8880,
25.3.6 [320 Amps. ‘Each 1217
254 [Supplying of ISI Marked iron clad /metal cad wiple pole and neutral switch]
fuse unit with two earthing terminals & without HRC fuses ~
2543 [63 Amps. 415/500 Vols. Each 3365
25.4.4 |100 Amps. 415/500 Vols. Each 6162
25.15 [Supplying & fixing of High Breaking Capacity (HBC) Fuse Links bolted]
lconnection type as per IS : 13703 : 1993 & IEC: 60269 1986 with 80 kA]
. breaking: capacity af approved niake
25:152_[36 Amp 10.63 Amp Each, ED
25.15.3 _|80 Amp to 125 Amp Each 187
25.15.4_|160 Amp to 250 Amp Each 282
25.155 [300 Amp 10315 Amp Each 414
25.156 [400 Amp to 500 Amp Each 851
25.15.7_[630 Amp. Each 1522
25.16 |Supplying & fixing of High Breaking Capacity (HBC) Fuse Links knife (DIN}]
liye as per IS : 13703 ; 1993 & IEC :60269 :1986 with 80 kA breaking|
lcapacity of approved make
25.161 [20 Amp. to 100 Amp. Each BS
25.162 [125 Amp to 160 Amp Each. 284
25.163, [200 Amp 10315 Amp Bach 339
25.164 [350 Amp 10 400 Amp Each, ai7
25.16.5 [425 Amp 10 630 Amp Each, 386.
25:17 [Supplying & fixing of ISI marked Porcelain Rewireable type fuse carrier &|
base unit of approved make & confirming to IS: 2086-1993
16 Amps 7240 Vals Each 100.
116 Amps. /415 Volts or 32 Amps/240 Volts Each 167
32 Amps /415 Volts Bach 1,
[63 Amps /ATS Volts Each 303
700 Amps 413 Volts Each ‘S48
[200 Amps /415 Volts Each 1027
Ago
Page 1 of 22SNSOR DESCRIPTION OF ITEMS, Ui Rate
2.17.7 [300 Araps 13 Vols Each 1481
25.18 [Supplying & fixing of IT marked DMC [Nylon Fuse holder Tilag Fuse Base
for knife type HBC fuse Links of approved make & confirming to 1S:13703-2.1
2518.1 [DMC 7Nylon Fuse holder fitting 20 Amps AIS Voris Each Ts,
25.18.2 [DMC /Nylon Fuse holder fiting 32 Amps 115 Vols Each 166;
25.183 [DMC /Nyion Fuse holder fitting 63 Amps 415 Volts Each 198
25.184 [DMC 7Nylon Fuse holder iting 100 Amps 413 Volts Each 312
[DMC 7Nylon Fuse Base 160 Amps /415 Vols Each 246
DMC Nylon Fuse Base 250 Amps 415 Vols Each 487
25.18.7 [DMC Nylon Fuse Base 400 Amps 413 Volts Each 649
25.188 [DMC Nylon Fuse Base 630 Amps /41S Volts Each 386,
BUSBAR CHAMBERS AND BUS TRUNCKING
SNSOR DESCRIPTION OF ITEMS Unie Rate
26.1 [Sepplying of metal clad ISI Marked bus bar chamber made of Teany Grape
iron sheet complete with copper strip and bus bar supports as per specication
confirming to 18-4064
26.1.1 [32 AMP 440/500 VOLTS, 4 way Each 1676
26.1.2 [60/63 AMP 440/500 VOLTS, 4 wa Each 1882
26.1.3 |100 AMP 440/500 VOLTS, 4 wa Each 2518
26.14 [200 AMP415 VOLTS, 4 way Each 3567
26.15 [300 AMP415 VOLTS, 4 wa Each 6295
26.1.6 400 AMP 413 VOLTS, 4 way Each 10732
26.1.7 [500 AMP/415 VOLTS, 4 wey Each 14003
MCCBs, ISOLATORS, MCBs, RCBOs, MCB DBs
SNSOR, DESCRIPTION OF ITEMS Unit Rate
27.1 [Supplying of IST Marked and approved make of Moulded Gase Circuit Brcaker
|(MCCB) suitable for 3 phase.3 pole0 Hz, 415 Volts, AC supply. with
respective interupting capacity (KA).at 415 Volts cited against their range
standard conforming to IS ~ 8828
MCB with Breaking Capacity 10 KA at 415V.
[Current Rating -25 10100 Amps Each 1526
MCCB with Breaking Capacity 25 KA at 415 V
[Current Rating -25 10100 Amps & 80% -100% adjustable Each 30a
[Current Rating -125 Amps & 80% -100% adjustable Each 6506
27.423 |Current Rating -160 Amps & 80% -100% adjustable Each 8891
27.1.2. |Current Rating -200_Amps & 80% 100% adjustable Each 11897
27.1.3 _ |MCCB with Breaking Capacity 35 KA at 415 V
27.131 [Curent Rating -160 Amps & Adjustable: 80% -100%ahermal Each R38
27.132 [Current Rating -200 Amps & Adjustable: 80% -l00%hermal Each 12860
27.433_|Curent Rating -250_Amps & Adjustable: 60% 100% thermal Each Ta934
27.134 [Curent Rating 315 Amps & Adjustable: 80% -100% thermal Each 19469.
27.135 |Current Rating -400_Amps & Adjustable: 80% ~100% thermal Each 21704
27.136 |Current Rating -500/630_Amps & Adjustable: 80% -100%themal Each 25189,
27.14 [MCCB with Breaking Capacity 50 KA at 415 V
TAAL [Curent Rating -800 Amps & Adjustable: 70% 100% thermal & @-10| nab 40903,
times magnetic seting
Kaghe
Page 2 0f 22SNSOR, DESCRIPTION OF ITEMS Unit Rate
"213 —|Supphing of approved make Moulded Case Circuit Breaker (MCCB)|
without. protection release suitable for 3 phase, 3 pole, 50 Hz, 415 Volts, AC|
supply standard conforming to IS ~ 8828
273.1 |MCCB with Breaking Capacity 36 KA at 415 V
FTAA |MCCB Switch Disconnector Rating -200 Amps 3 Pole without protection) Each 10655
[Release
FISID |MCCB Switch Disconnecior Rating 400 Amps 3 Pole without protetion] Each Tas
Release
FISIS |MCCB Switch Disconnector Rating -600 Amps 3 Pole without protection] Each 16368
Release
FiSIA |MCCB Switch Disconneciot Rating -200 Amps 4 Pole without protection] Each 13674
Release
FISAS |MCCB Switch Disconnecior Rating 400 Amps 4 Pole without protection] Each Te48
Release
FIA |MCCB Switch Disconnestor Rating -600 Amps 4 Pole without prtction) Each 2a
Release
FAS [Supplying of IS! Marked and eccopted standard of Miniature Circuit
[Breaker (MCB) of 'C’series suitable for 240/415 Volts, 50 Cycle , 10 kal
IValue AC supply confirming to 1S : 8828 : 1996, IEC : 60898 2002]
but without enclosures =
7754 __|FOR TRIPLE POLE (TP)
2754.1 0.5 Amp to 5 Amp Rating Each 1048
27542 [6 Amp to 32 Amp Rating Each 887
27:54;3 |For 40 Amps. Rating only. Each 1335)
27544 [50 Amp t0 63 Amp Rating Each, 1374
2755 |FOR TRIPLE POLE & NEUTRAL(TPN)
2753.1 [0.5 Amp to 5 Amp Rating Fach 1501
727552 [6 Amp to 32 Amp Rating Each 1252
2755.3 |For 40 Amps. Rating only. Each 1g
27354 [50 Amp to 63 Amp Rating Each 1830)
2756 _|FOUR POLEGP)
2736.1 [0.5 Amp to 5 Amp Rating Each Tae
2756.2 _|6 Amp to 32 Amp Rati Each 1222
2756.3 |For 4) Amps. Rating only. Each 1731
775.64 50 Amp to 63 Amp Rating Each 1778
27.6 — [Supplying of MCB Isolators suitable for 240/415 Volis, S0Hz AC supply wit)
IKA value rating 1OkA of pproved make confirming to IS :13947-Part Il: 1993
|e TEC 260947-3:2001 (without enclosures ) =
[SINGLE POLE
.6.1.1_}40 Amps. Each 212
27.6.1.2 [63 Amps. Each 238
27.62 [DOUBLE POLE
27.6.2.1_[40 Amps. Each 350
27.62.2 [63 Amps. Each 455
27.63 _|TRIPLE POLE
77.63.1 [40 Amps. Each Sr
27.63.2163 Amps. Each 72
27.64 [FOUR POLE
27.641 [40 Amps. Each 7
27.642 [63 Amps. Each 833
Page 3 of 22SNSOR DESCRIPTION OF ITEMS Unit Rate
27.16 [Supply fixing oF approved make accepted standard sheet seal enclosure ual
Jprotectec )duly powder coated paint Neutral bar suitable for MCB /BOs/MCCB
lof capacity as required etc. complete as per specification ( exclusive of M.C.B.J|
IMCcB/RCBOs )
27.161 _|ForMCB
27.16.1-1 [DP/TP/FP Enclosure Each aaa
27.16.1.2_|FP RCBO Enclosure Each a9
For MCCB
[63/100 3P/4P Enclosure Each Tas
27.162.2 [160A 3P/AP Enclosure Each 2782
27.16.2.3 [250A 3P/4P Enclosure Each 4942
27.162.4 [250A ER 3PAP Enclosure Each 3918
FIXING OF SFUs, DBs, BUSBAR, MCCBs, MCBs, ISOLATORs & RCBOs
SNSOR DESCRIPTION OF ITEMS Unie Rate
28.1 [Fixing of metal clad enclosure on 25 X $ mm flat ron clamps Tnohading]
[supplying and fixing of clamps as required duly embedded in. masonry|
including cable connection and other required material as per
specification :-
28.13 [32 Amps TP or TPN switeh/ 32 Amps 415 V Inolator/ 16 Amps TPN DB up to} 155
[6 way per pole /32 Amps 415 Volt bus bar 4 way
282 [Fixing of metal clad enclosure on 25X 25 X 5 mm angle ron clamps Tacluding|
supplying and fixing of clamps as required duly embedded in masonry|
including cable connection and other required material as per
[specification
28.2.1 |Fixing of 63 Amps TP or TPN main switches/ DB 63 Amps, 240/415 Vok 4 tol Each BD
8. way or 63 Amps change over switch /63 Amps 415 Volt Isolator 30 Amps
|415V TPN DB up to 6 way per pole and bus bar 4 way
282.3” Fixing of 200 Amps TP or TPN main switch or 200 Amps change over switch] ~~ Each 288
[/200 Amps 415 Volt Isolators and busbar 4 way
8S ing of metal clad enclosure on 35X 35 X 5 mm angle iron clamps including]
Jsupplying and fixing of clamps as required duly embedded in masonary
including cableconnection and other required material as per
specification =
28.3.1 [Fixing of 300400 Amps TP or TPN main switch or 300400 Amps] Each 315
|change over switch /300/400 Amps 415 Volt Isolators and bus bar 4 way
28.32 [Fixing of S00600 Amps TP or TPN main switch or 500600 Amps] ~~ Each 38
|change over switch 500/600 Amps 415 Volt Isolators and busbar 4 way
28.4 |Fixing of MCB 7MCCB/ Tsolator in sheot steel enclosure as required as per
Jaccepted practice, including mounting on busbar and cable connection ec.
|complete (Labour only )
284.1 _ [MCB Isolator SP/DP Each 10
28.42 |MCB /MCCB Isolator TP /TPNIFP Each 20
WIRING ACCESSORIES, PANELS, LAMPS
SNSOR DESCRIPTION OF ITEMS. Unit Rate
Aiyeh
Page 4 of 22SNISOR DESCRIPTION OF ITEMS, Unit Rate
29.33 [Supplying, fixing, testing & commissioning wall / floor mounted LT Panel 162
primer coated with powder coated paint& provided with required gasket
Jdust / vermin proof with degree of protection 1P42 suitable for 415V 3 phase,
I50 Hi4 wire system fabricated out of CRCA sheet up to 2 mm thick (1.6 mm]
for doors) duly compartmentalized for incomer, bus section, outgoings,
lcable alleys & CT, PT, Ampere Meter, Volt Meter, selector switches,
[Frequency Meter, phase indicating lamps, Energy Meter complet]
including, cost of busbar supports, detachable cable gland plates, 2 earthing]
terminals, intemal wiring & fixing of separately supplied MCBs, MCB ,
JACB, panel mounted Changeover switch / SFUs, etc. as required but excluding]
Jcost.of bus bar strips, Ampere. Meter, Volt Meter, Selector switch as per
approved design & specification
pkg,
2934 Supplying and fixing of LT Panel accessories of approve make in exist
Panel including connections et. as required as pet specification
2934.1 [Digital Ampere Meter with CTs with selestor switch pediset 1755
2934.2 [Digital Volt Meter with selector switch & HRC fuse periset 1890
29.343 [frequency meter Each 1080,
729.34.4 | Copper Bus bar strips with PVC sleeves pkg. 585
29.345 [Aluminium Bus bar strips with PVC sleeves pkg. 235
729.346 [LED lamp indicator Each a0
PAINTING.
SNSOR DESCRIPTION OF ITEMS Tait =
‘344 [PAINTING OF POLES
344.1 [Removing ofold paint from steel and other metalic surface and making surface
leven. pisqmt 16,
3442 [Primer coat over new steel and other metalic surface with red oxide/ zine] =
lchromide paint complete with supply, of material labour etc. including] *
lpreparation of surface. pisqmnt 2
S4A3 [Final coat with aluminium paint, brushing complete including material and|
labour. plsqmt 3.
DISMANTLING OF CIVIL & ELECTRICAL WORKS
SNSOR DESCRIPTION OF ITEMS Unit
359 [Dismantling of existing steel pole, RS.Joist, girder with bracket clamps|
insulator or stay from the cement concrete foundation and making the site clear
by refilling the pit to ground level ic transportation to required destination]
within township, Each 939
35:1 [Dismantling of existing overhead ACSR, AAAC, OT , conductor and making
ihe site clear i/c transportation to required destination within township.
pimt 4
Eq [Dismantling of existing watertight uorescent tube fiting/ M.V. Lamp fitting]
with making the site clea. Each 27
35.12 [Dismantling of existing water ight fing SVIMHJLE.D Lamp fitting with]
Jextension bracket, clamp from pole or wall with making the site clear.
Each 35
SNSOR DESCRIPTION OF ITEMS Tait
Ah
Page Sof 22SNSOR DESCRIPTION OF TEMS Ta Tate
31 [Earing wih GL. Ear pipe 45 Metre ong and 40 mim da Wit mason
enclosure in cement moor, cover plat having locking. amangement eg
ine tp (but without charcoal or coke an sa completes raved.
Esch ams
37a [Rai Exira orig alt and aol ak Tr pipe crt aeons ws Food
ncn excavation & refiling
FBI Excavation 2.5 cum by manual boar
Each is
7 ation by making hole Wit
Ta _|xcavation by making hole wit ger oe so
‘SA |Add Evra Tor lng alt and carcoal coke Wor GI Fas 0 SOPPS Fae
Jelcoode a required incading excavation & refling ach nt
352 |Add Eira for ing salt nd charcoal coke er OL plas o Spper Fats Gah
eeccode as required incioding excavation in Hard Rock tnd riling he i
vith black sil.
Each 3018
317 |Scppiving and lying GWG Gon) GI. wie w D5 Mens Weow pom
levelas conductor arth clectode including soldering ee. ae ie,
pit 21
378 [Sapp and ying Dm X Sm GI ip w 03 Mes low Ground]
as tip earth clecrode incuting soldering teat emi,
pine 6
373 |Supiying and ayng Diam X Gown GI. Seip OS Wer blow ground Tove
las sup earth elecuode including soldering ees requied, pial 12
‘HAT |Providing & Fixing 25mm X Smm Gl. stp in Ame da GI. Pipe BC
om earth elect as require, pit 381
B72 [Providing & laying er connecons om cah decvols wih A mm Te
|G. Wire in 15mm dia pipe (B clas) fon ear lero a required, pint 14
“STAB [Providing and xing 25m X fmm “Gil sip ot” are oF °
ecesed/conesed fr connection et. require. ia xc
S16 [Providing and tring 6 SWOSGmin) GI wis oo waace or
recessed/sonceaed fo lop earthing s required pint ”
3718 [Supplying and laying Om X Gran Gl. strip a 03 mee Blow pound eve
surface as sip earth electrode including einting et eqired pint &s
(External) UNDER GROUND CABLES
SHSOR DESCRIPTION OF TEMS Tai Rave
41-1 [Supply OFRLPE Tasulied power cable (confirming S-TOSRPART) 1100 Vor
erde, 1 core 72 coe /3%5 corel core ISIMARKED with Al. Stand slid
eondactor
[ARMOURED 1 Core
16 Samm. Pa 5
[25 Samm. pimt oF
[35'Sqmm. pit 110
450 Sq.mm. pit 133,
41.125 70 Samm. pint 15
41.1.2.6 [95 Sq.mm_ pimt 191
1.12.7 [120 Samm pint 230
150 Samm. Pint 2
00 Samm. “pint oe
Page 6 of 241.18.10
4.18.10
DESCRIPTION OF ITEMS
INARMOURED 3 Core
10
16
ps
35,
so
[70
95
mm.
1% CORE UNARMOURED
S
5
0
5
20.
50
85
40:
00
00
nm.
am.
mom,
ram.
mm.
mA.
(OURED 34 CORE,
am
‘CORE UNARMOURED,
[6 Sqanm.
10 Samm.
6s
ios
Bs:
Iso
[70
95
120.
150.
mm
sam.
Page 7 of 22DESCRIPTION OF ITEMS Rate
‘ARMOURED 4 CORE
6 Samm. Pint 136
10 Sqn. plot 163
16 Sgmm. pint 17
25 Sqm. pit a5
5 Sqm. pint 31
50 Sqmm. pint 339)
[70 Sqm. pint 332
411.108 [93 Samm, pit on
4.1.10. [120 Sq.mm, pint $31
41.1.10.10 [150 Sqm. lt 1013
41.2 Supply of approved High-Tension XLPE cable (conforming ISTODRTITES yw
per ISt standard single core Armoured with Alu. Solid/stranded conduct
ISI_MARKED as required
SINGLE CORE XLPE CABLE TT RV GRADE
[50 Sgmm pint a
412.12 [70 Same pit 367,
412.1395 Samm pint a
412.14 [120 Sqmm pint 466
412.15 [130 S9.mm pint 3i4
41.22 |SINGLE CORE XUPE CABLE 3 KV GRADE
4122.1 [95 Sqmen pint a
4122.2 |12053.mm pint 736;
41223 [15053 pint 351
‘413 Supply of approved High-Tension XLPE cable (Conforming ISTODR7TES as
per ISI standard 3 core Armoured with Alu, Solidstranded conductor ISI
MARKED as required
[5 CORE XLPE CABLE 11 KV GRADE.
[50 Sgmm : pat 7ST
[70 Sqrmim im 399)
[95 Sqmm plat 074
120 $9.2 pint 1339
150 Sq. pit 1383
CORE XUPE CABLE 33 KV GRADE
4132.1 [95 Sqmm pat Ta5
4132.2 [120 S9.nm plot 2126
4132.3 [150 Sqm pint 2306
414 [Supply of XLPE Insulated power cable (conforming 1S~ 7098 ) 1100 Vail
Jeradelteavy duty power cable 2 core / 3 core ISI MARKED
Stranded /solid conductor
“4141 ARMOURED? Core
MALI [2.5 Symm.(Heavy Dug) pat 1
[BRASS COMPRESSION GLAND
‘4135 [Supplying and fixing heavy duty cable gland for PLV.C. Insulated armoured
cable with brass washer, Rubber ring complete erected with cable and lad
connection et. as per specification complete.
415.1 _|Gland Size 22mm suitable for cable 23.5% & 4x wp WO Sqmm Each a
4152 |Gland Size 22mm suitable for eable 23, 314, 24x 10 Sqamm or 2x 16 Squmm
Each 4
G53 _ [Gland size 28mm for x 16 Sqm Fach ss
41.54 [Gland size 32mm for 273, 35, 4 x25 Sqmm ORIG, 34x35 Sqmim ORID A
50 $9.mm. Each 2
4155 |Gland size Somm 3x 70 Sqm, 395 Sqm Foch 104
keh
Page 8 of 22DESCRIPTION OF ITEMS, Unit Rate
[Gland Size 45mm 373%4x 120 Sq.mm, 39x 95 Sq.mm 3 x 150 Sqm. Each 13
[Gland Size $0 mm 34x 150 Sqmm, 3x 185 Sqmm Each 159.
[Gland Size 57mm 3 x 225 Sq.mm, 3 74x 185 Sqmm Each 220,
[Gland Size 70mm 3x 240 Sqmm, 3%x300 Sqmm Each 300
[Gland Size 82mm 3% x 400 Sqm Each 390
ILUGS:-
G7 |Supplying and fixing ramping type Alum. lugs as per LS.S.Specification
suitable for following size of cable with Alu/Copper solid/stranded conductor
levently cramped with highipressure tool and connected to switch]
|zcar/Bus/M.C.C.BJ M.C.B. ete as required complete. For Conductor Size-
[émmie 16 Sqm Each, 2
[25 Samm Each 4
[35 Squnm Each, 5
[50 Samm, Each 7
[70 Sqmmn_ Each, 10
95 Sqm Each, is
120 Sqm. Each, 19
150 Sqm. Each, zr,
180 Sq.mm Each, 36
1.7.11 [300 Sqm. Each 6
41.7.12_|400 Sqm. Each 104
41.8 —|Supplying & fixing pin terminal lugs as per ISS specification sultable for cable
levently cramped with high pressure tool & connection to switch gear terminal. 5
(Aluminum Lugs Pin Type
[Up to 16 Sqsmm2 Conductor Size Each £
[Up 1025 Sqm? Conductor Size Esch z
[35 Sqamm Conductor Size Each 10,
[Aluminum Lugs Tube Type
[Up to 16 Sqmm Conductor Size Each, T
[25 Sqmm Conductor Size Each, 3
[35 Sqm Conductor Size Each 3
[50 Sqamm. Conductor Size Each, 7
[Cable Jointing.
iS [Providing & Making cable end termination with HEAT SHRINKABLE|
jointing kit complete with all accessories\including lugs suitable for 33
kV/11 KV single core XLPE alum. conductor cable as required as pe
specification and as per accepted standard including connection testing|
|complete.
19:1 _|Heat shrinkable joint kit 11 KV XLPE Single Core
19.1.1 [Heat she jointg. kit 11 kV XLPE cable O.D. termination
fa. 1 x 16-35 sqmm. Each 3678
[b._1x.50-95 sq.mm. Each: 3925
Je. 1x 120-185 sq.mm. Each 2293
i912 _ [Heat shr jointg. kit 11 KV XLPE cable LD. termination
fa. 1x 16-35 sq.mm. Each, 2650
fb. 150-95 sq.m, Each 2689
fe. 1x 120-185 sq.mm. Each 3056
FIL.9.3 [Heat sh joing. kit 11 KV XLPE cable Straight Through termination
fa 1x 16-35 sqmm. Each C53
fp. 1x 50-95 sq.mm. Each 7518
hope
Page 9 of 22SNSOR DESCRIPTION OF ITEMS, Unit Rate
le Te 130-185 sqm, Each 8283,
41.92 [Heat shrinkable joint kit 33 kV XLPE Single Core
Heat shrjointg. kit 33 kV XLPE cable O.D. termination
fa. Te 35-70 sq.m, Each CAO.
lb. 1x 95-150 sqm, Each 7163
fc. 1x 185-240 sqamm Each 7893
4192.2 |Heat she jointg. kit 33 KV XLPE cable LD, temninaion
fa. Vx 35-70 sqm. Each 1036
b. 1x 95-150 sqm, Each 473
le. 1 185-240 sqm, Each 6357
41.9.2.3 [Heat sr joing, kt 33 KV XLPE cable Suaigh Through termination
la. 1x 35-70 sq.mm, Each 15685
[b. 1x 95-150 sqm. Each 19675
Je. 1x 185-240 sq.mm. Each 23317
41.1 [Providing & Making cable_end termination “wih HEATSHRINKABLE|
joining kit complete with all accessories including lugs suitable for 33 kV/11
[kV 3 core XLPE alum. conductor cable as required as per specification and as|
Jper accepted standard including connection testing complete.
41.10.1 [Heat shrinkable joint kit 11 kV XLPE, 3 Core
41.10:1.1 [Heat shr joing. kit 11 kV XLPE cable O.D. tenninatfon
fa 3x 16235 sqm, Each 9320,
b. 3x 50-95 sqm. Each 10597
Je. 3x 120-185 sq.mm_ Each 1770
41.10.12 [Heat she joing. kit 11 KV XLPE cable LD, ternination
fa. 3x 16-35 sq.m. Each a3
b. 3x 50-95 sq.m, Each 13415
Je. 3x 120-185 sqm. Each 14122
41.10.13 [Heat shr joing. kit 11 KV XLPE cable Straight omit
la. 3x 16-50 sqm, Each T8085
fb. 3x 70-95 sqm, Each 19808
fe. 3x 120-185 sqmm_ Each 724212
41.102 |Heat shrinkable joint kit 33 kV XLPE, 3 Core
41.102.1 [Heat shr jointg. kit33 kV XLPE cable O.D. tenninatfon
fa, 3x 35-70 sq.mm. Each 19082
b. 3x 95-150 sqm. Each 22619)
le. 3x 185-240 s9.mm: Each 28203
41.10.2.2 [Heat shr jointg. kit 33 kV XLPE cable LD. termination
3x35-70 sqm, Each 15071
lb. 3% 95-150 sqamm, Each 15665,
fe. 3x 185-240 sq.mm_ Each 21722
41.10.2.3 [Heat she joinig. kit 33 kV XLPE cable Swaight Join
fa 3x 35-70 saumm, Each ass,
b 395-150 sqmm, Each 33553
Je. 3x 185-240 sq.mm_ Each T2951
4111 [Supply and making cable straight Joint 7 end termination wit HEAT]
ISHRINKABLE jointing kit complete with all accessories including lugs
suitable for 1.1 kV XLPE/HDalum. conductor cable as required as per
specification and as per accepted standard including connection testing
|complete for (.D.J0.D.) termination.
ALL [Heat shrjoinig. Kit 1.1 KV XLPEMD cable end termination
laps0D),
hop
Page 10 0f 2SNSOR DESCRIPTION OF ITEMS Unit Rate
la. 6-16 sqmm 1 core Each 410
fb. 25-50 sqmm 1 core Each 464
fe. 70-150 sqmm 1 core Each 64
[d_ 185-300 sqmm_1 core Each 967
fe. 400-500 sqmm 1 core Each Tr6t
FATA Vicar shrjoinig. Kit 11 KV XLPEMD cable straight through joining ki
|(.D.10.D)
fa. 6-16 sqrum 1 core Fach 766.
[p.25-50 sqmm_1 core Each 29)
fe. 70-150 samm_1 core Each Tos
185-300 sqmmm 1 core Each 1203
fe 400-500 samm 1 core Each 1393
GETLS [Flea sr joimg. Kit1.1 KV XLPEVHD cable LD/O.D. end temmination
fa. 6-50 sqmm 3 core Fach 135)
[b. 70-150 samnm_ 3 core Bach 1745
fe 185-300 sqmm 3 core Each 2281
fa. 400-500 sqrmm 3 core Each 265
FLTLA |Flct she joing, Kit 1.1 KV XLPEZAD cable LDJO.D. endternmination
fa 6350 sqmm 4 core Fach 1335)
ib 70-150 sqmm 4 core Each 1908.
fe. 185-300 sqmm 4 core Each 217
[d. 400-500 sqmm 4 core Each 2963
FALE [Heat shrjointg. Kit 11 kV XLPEMD cable straight through jointing ki]
la.p./0.D..
fa. 6-16 sqmm 347 foore Each 1
fb. 25-35 sqmm 3947 deore Each 1752
fe. 50.95 sqm 374 /4core Each 2325
[é, 120-185 sqmm 3% /doore Each 3093
fe. 225-300 sain 39 / 4eore Each aang
F_400-500 sqmm 3% / 4eore ach G38
Fiat |Soppying & installing GI. Pipe for protection of underground cable
fixed on wallsupporvin trench/fixed Between two rigid existing. suppor}
lof wall/beam for erection of ceiling Fanfdown rod for sti pendent for light
luminaries /faniprotetive for earthing, lightening conductor _ down!
stripoverhead service line/for submersible cable or centrifugal pump for
lwater supply with necessary iron clamp couplet, bend, tee, elbow, nuts
Jand bolts etc. complete in an approved manner as required to complete
Jexcluding cost of excavation/ dismentalling & other finshed masonary lem!
complete.
12.1 |For BY Class pipe IST Marked (S-1161-68)
.12.1.1 [15.00 mm. pint i
41.12.12 [20.00mm pimt 151
41.12.13 [25.00mm. pit 215
41.12.64 [32.00 mm pit 271
4.12.15 [40.00 mm, pit 316
4.12.16 [50.00 mm pimt 419
#1.12.1.7 [65.00 mm, pimt S27
80.00 mm im 685
41.12.19 |100.00mm- pit. 963
41.12.1.10 [150.00mee pimt 1578
hog —
Page 11 of 22DESCRIPTION OF ITEMS
Unit
[Supply and laying rigid PVC single socket and, non meal pipe TSI
Marked! (1S-4985-2000) 10 Ke/sqcm classS for protection of under ground
Jeablelor for water pump delivery side, for waier supply complete with
necessary clamp coupler, band, Tee, Elbow ete, in an approved manne
excluding cost of excavation ete.
ETRERY
110.00mam OD
pint
38
M134
160.00mm 0.D
1147
41.135 |200.00mm 0.
pit
1780,
Supplying and installing Double wall comugaied pipes (DWC) of HDPE (|
HS 14930 Part II -marked ) for cable leidunder ground with necessary
Jmaterial and at requireddepth upto 90cm. below road/ground surface|
includingexcavation, back filing with excavated material, ramming and
making the surface good,
ini
Py
pint
162
int
210
110.00mm outside dia,
pint
238
720.00mm outside dia.
pit
180.00mnm outside dia.
pint
371
[210.00rmm outside dia
pit
ro)
[Laying of one number PVC insulated and PVC sheathed power cable of LIEV]
larade of size not exceeding 25 Sq, mm direct in ground including excavation,
Jsand cushioning, protective covering and refling the pit et. as required,
pimt
1a
[Laying of one number armoured 7 unarmoured power cable LURV grade ol
size exceeding 25Sq.mm but not exceeding 120 Sqmm direct in ground|
including excavation in all soil / murrum / soft rock, sand cushioing protective
[covering and refiling the pit etc, as required.
190
[Laying ‘of one number armoured /, unarmoured cable LIKV grade oF sia}
Jexceeding 120 Sq mm but not exceeding 400 Sqmm direct in ground|
including excavation in all soil / murrum / soft rock, and sand cushioning
protective covering and refilling the pit tc. as required.
pit
206
[Laying of one number additional armoured 7 unarmoured power cable 1.1KV|
[grade of size not exceeding 25Sq.mm direct in ground in the same trench in one|
tice horizontal formation including excavation in all soil / murrum / soft rock,
[sand cushioing protective covering and refilling the pit etc. as required.
100
[Laying of one number additional armoured 7 unarmoured power cable 1.1KV|
Jerade of size exceeding 25 Sq.mm but not exceeding 120 Sqmm direct in|
Jeround in the same trench in one tier horizontal formation including!
excavation, sand cushioning, protective covering and refilling the pit ee. as
required.
pit
108
[Laying of one number additional armoured / unarmoured power cable 1.IKV|
rade of size exceeding 120 Sq mm but not exceeding 400 Sq mm direct in
[eround inthe same trench in one tier horizontal formation including excavation,
sand cushioning, protective covering and refilling the pit etc. as required.
pit
14
Laying of one number PVC insulated and PVC sheathed power cable of Tl
kV grade of size not exceeding 25 Sq. mm in the existing RCC Hume! Stoned}
| Ware/G.1. pipe as required.
pint
hoy
Page 12 0f 22SNSOR
DESCRIPTION OF ITEMS,
Rate
‘4122
[Caying of one number armoured / unarmowred power cable -1 KV grade o
size exceeding 25 Sqmm but not exceeding 400 Sq mm inthe existing RCC|
Hume ‘Stone warelG.. Pipe surface in existing tench s equied
pimt
39
as
[Laying of one number armoured / unarmoured power cable 1.1 KV grade of
size not exceeding 25 Sq.mm in th existing masonary open duct as required.
pint
a2
[Laying of one number armoured 7 unarmoured power cable L1KV grade
size exceeding 25Sq.mm but not exceeding 400 Sq.mm in the existing
|masonary open duct as required.
pimt
39
4128
[Laying of one number single core HT armoured / unarmoured power cable
Jerade exceeding 11kV but not excecdinglIkVof size not exceeding
J50Sqmmdirect in ground including excavation inal soil /murrum / soft rock,
sand cushioning, excluding protective covering and refilling the trench ee. as
required.
pint
124
4126
[Laying of one number single core HT armoured 7 unarmoured power
|cable of grade 33KV of size not exceeding 150 Sq.mm direct in ground]
including excavation sand cushioning, excluding protective covering and
refilling the trench et. as required
pimt
124
wa7
[Laying of one number single core HiT armoured 7 unarmoured power
lcable of grade exceeding 1-IkV but not exceeding 11kV of size not exceeding]
150 Sq.mm in the existing RCC / Hume / Stoneware / G.l. Pipe / surface in|
lexisting trench as required.
pint
24
w28
[Laying of one umber Single core H.T armoured 7 unarmoured power
lcable of grade exceeding 1.1kV but not exceeding L1kV of size not exceeding|
1.50 Sq.mm. inthe existing masonary open duct a requied.
pint
a9
[Caving of one number single core FT armoured 7 unarmoured power
lcable 33kV grade of size not exceeding 150 Sq.mm in the existing RCC /
lathe / Stoneware / Gl, Pipe /sirface in existing trench as rejuired.
pimt
28
a3
[Caying of one number single core HLT amoured /unarmoured power cable
JS3kV. grade of size not exceeding 150 Sqamm. in the existing masonary
lopen duct as requie.
pit
32
ast
[Laying of one number single core HiT ammoured 7 unarmoured powe
Jcable 11kV grade of size not exceeding 150 Sqmm on wall / pole etc. as
required.
pimt
37
[Laying oF one number single core HT armoured 7 unarmoured power
lcable 33kV: grade of size not exceeding 150 Sqimm on wall / pole etc. as
required.
ai33
[Laying of one number 3 core FT armoured / unarmoured power cable of grade]
lexceeding 1.1kV but not exceeding 11kV of size not exceeding 150 Sq.mm|
direct in ground including excavation in all soil / murrum / soft rock, sand]
lcushioning, excluding protective covering and refiling the trench ete. as
required.
pimt
169
ast
[Laying of one number 3 core H.T armoured / unarmoured power cable of
lerade 33kV of size not exceeding 150 Sqmm direct in ground including|
[excavation inal soil /murrum / soft rock, sand cushioning, excluding protective|
[covering and refilling the trench etc. as required
pimt
177
Kagel
Page 13 of 22'SNSOR
DESCRIPTION OF ITEMS
Unit
4135
Laying of one namber additional 3 core H.T armoured / unarmoured power
Jeable of grade exceeding I.1kV but not exceeding 11kV of size not excceding|
150 Sq.mam direct in ground in the same trench in one tier horizontal formation|
including. sand cushioning, excluding protective covering and refilling the
trench as required.
im
7
436
[Laying of one number additional 3 core HT armoured 7 unarmoured power]
Jcable 33KV grade of size not exceeding 150 Sqmm direct in ground in the]
same trench in one tier horizontal formation including sand cushioning,
excluding protective covering and refilling the trench etc as requied,
pit
125
w37
[Laying of one number 3 core HT armoured /unarmoured power cable of grade
exceeding 1.1kV but not exceeding !1kV of size not exceeding 150 Sq.mm in
the existing RCC / Hume / Stoneware / G1. Pipe / surface in existing trench as|
required.
a7
W138
[Laying of one number 3 core HT armoured /narmoured power cable of grade]
Jexceeding 1.1kV but not exceeding IIKV of size not exceeding 150 Sq.mm. in
the existing masonary open duet as requied.
pit
a”
W139
[Laying of one number 3 core H-T armoured narmoured power cable TIKV|
grade of size not exceeding 150 Sq.mm on wal / pole ete. as required.
plot
aa
[Laying OF one number 3 core HiT armoured 7 narmoured power cable 33KV]
larade of size not exceeding 150 Sqmm in the existing RCC / Hume /}
[Stoneware / G.l. Pipe / surface in existing trench es required.
pimt
a
wat
[Laying of one number 3 core H-T armoured / narmoured power cable 33KV]
lerade of size not exceeding 150 Sq.mm. inthe existing masonary open duct}
las requied.
pit
a7
War
[Laying of one umber 3 core FT armoured / narmoured power cable 33KV]
lerade of size not exceeding: 150 Sq.mm on wall / pole et. as required.
imt
a
aa
[Laying and fixing of one number PVC insulated and PVC sheathed alumintom|
Jconductor cable of 1.1kV grade of size not exceeding 25 Sq. mm on surface|
etc. as required.
pit
aaa
Laying of one number armoured / unarmoured cable 11K grade of size}
Jexceeding 25 Sq.mm but not exceeding 120 Sq.mm on surface in existing
trench etc. as required.
pit
31
Was
[Laying Of one number armoured / unarinoured cable I,1kV grade of Siz]
Jexceeding 120 Sqmm but not exceeding 400 Sqmm on surface in existing}
trench etc. as required.
pie
39
wae
[Excavation of the trenches in Hard Rock not exceeding] 5 metre in width and]
lift upto 1.5 metre including getting out the excavated metal and disposal of
surplus excavated soilmetal as directed within the lead of 50 metre (without
blasting)
pleut
485
aa7
[Laying of one number armoured /unarmoured cable LIkV grade of size nol
Jexceeding 25 Sq.mm on wallAruss with approved type of iron clamps ete. as
required.
pit
36,
4148
[Laying of one number armoured 7 unarmoured cable LIkV grade ol
Jsize exceeding 25 Sqmm but not exceeding 120 Sqm on wallAruss with
lapproved type of iron clamps etc. as required.
pit
aad
[Laying oF one number armoured 7 unarmoured cable LIkW grade of size|
lexceeding 120 Sqmm but not excceding 400 Sq.mm on wallhruss with
lapproved type of iron clamps etc. as required,
pit
95
Kale
Page 14 of 22SNSOR DESCRIPTION OF ITEMS Unit Rate
“41.5 — |Laying of underground cable armoured/ unarmoured as per specification in a
suspended on existing approved type of iron clamps, Gal wire 7/1.6mm &
shackle insulator insulated strip complete.
ASO _|172 7374 Core cable up to 16.Sq.mm pint 10
4150.2 [1/213 13444 Core cable 25 Sq.mm to 120 Sqm pit 18
4150.3 [1/2/37 3%1 4 Core cable 150 Sqm and above pit 3
“4151 — [Laying of cement concrete or approved type of cable coveiflag sone vey
IL-7 1.7. cable & refill trench as per speificaton. pit 10
GSE [Supply oF approved type cable cover flag stone 200mm width & 32mm to
Som thick of required length inclusive of transport as required. pit a
ISS — | Supply & Fixing Cable Route Marker round square size 100mm, Sm. Thick
JG Plate duly bolted/velded on 35mm x 35mm x Smm angle iron 60em lon]
excavation, grouting in cement concrete 1:2:4 (Ioement and 2 coarse}
Jsand :4 graded stone aggregate 20mm nominal size) foundation of size 20cm x}
J20cm x 30cm duly embedded in ground 30em depth or as required
Each 25
EXTERNAL ELECTRIFICATION AND OVERHEAD LINES
SNSOR ‘DESCRIPTION OF ITEMS, Unit Rate
[SUPPORT FOR OVER HEAD LINE
22 | Supply of support for overhead line RS joist 7H’ Beam ofS. standard
including drilling of required hole ec. complete as required.
2A __ [RS Joist 100%200-25.4 per mete Mere 1106
42.2.2 _|RS. Joist 175 x 85-1933 kpper metre Metre S41
422.3 [RS. Joist 150x 100-17 kp/per metre Metre 7A
42.2.4 |RSS. Joist 150 x80 -14.9 kp/per metre Metre oo
42.25 |RS. Joist 125 x75 13 ky/per metre Metre 366
2.26 _|H- Beam 152 x 15mm, Std weight 37.1 Kg Mir Mere Tie
42.4 [Supplying of presiressed cement concrete (PCC) pole conforming t0 1S:
1785 at_work site including required transportation.
AI__[PCC pole 8 mits. Long 140 kg Each 1830
42.42 [PCC pole 9.1 mirs. Long 280 kg Each 3431
42.5 [Supplying and drawing All Aluminum Alloy conductor AAC) of
lanproved make confirming to IS 398-1979 Pt IV, including binding at existing
insulator, jointing, jumpering, tearing off, connecting ec. as required including
clearing of obstacles (i any)
25.1 _|AAAC 0.03 sq inch (34 Sqmm Al. EQ.) - (Weasel) Km 27788
42.52 |AAAC 0.05 sq inch (55 Sq.mm Al. EQ. )- (Rabbit) Km. 46220
42.5.3 [AAC 0.075 sq inch (80 Sqamm Al. EQ.) - (Raccoon) Km. 58219
42.58 [AAC 0.1 39 inch (100 Sqmm Al. EQ. )- (Dog) Km. 70102
42.6 [Supplying and drawing of stranded Aluminium Conductor See! Reinforoed
J(ACSR) confirming to 1S:398-1976 of approved make, stringing, making off
~ Jcomplete with binding at existing insulator, jointing, jumpering, tearing off,
Jconnecting eic, as required and clearing of obstacles (if any) ete.
2.6.1 _|ACSR_0.02 Sq inch (20 Sqamm AL EQ.)- (Squire. Km 29004
42.62 |ACSR.0.03 sq inch (34 Sqamm Al. EQ. )- (Weasel) Km. 35642
42.63 [ACSR0.05 sq inch (55 Sq.mm Al. EQ. )= (Rabbit Km. 4219
42.64 JACSR.0.075 sq inch (80 Sqmm Al. EQ.) (Raccoon) Km. 66448
42.65 |ACSR 0.1 sq inch (100 Sq.mm Al. EQ. )- (Dog) Km. 80411
2.7 [Supplying and fixing guard insulator or split insulator complete:
oe
Page 15 of 22SNSOR
DESCRIPTION OF ITEMS,
Rate
42.7.1
255mm,
19
272
3737mm,
73,
[S0xS0mm-
30
as
[Supplying and drawing guard wirelearh wirelbearer wirel3mma(mm-
Dis) G.1. including stringing, binding atexisting insulators or brackets,
joining, jumpering,connecting & cradle ete. as required and clearing
lofobstactes (if any)
13221
a
[Supplying and drawing guard wie/carth wireicar Wiel? mm
(4.87mm. Dia /6swg) GL. including stringing, binding at existing insulators oF
brackets jointing, jumpcring, connecting & cradle ec. as required and clearing
lot obstacies (i any)
15478
i
Supplying and drawing G.L. bearer wire 7.6mm
stringing, binding at existing brackets / pole, et. for cable support in
required and clearing of obstacles
15
eit
[Supplying and erection of guards for exis
including spit insulator required as per speci
‘overhead lines as required
Bit
[Cradle type
B
B12
[Hexagonal ype
Each
16
O13
Ring ype
4
2.12
[Supplying and erection of water tight terminal box made of 16 SWG MS
[Sheet (1.6mm thick) i rubber gasket of required size suitable for kit kat/
[MCBY Switch including 2 Nos. pole clamp of M.S. flat ion size 323mm, nut
land bolts, 4 Pole epoxy connector nut & bolt type, 30Amp.300Volt. The
box shall be powder coated. Excluding the cost ofthe Kit KavMCB/Switch
|complete as per specification,
Bit
[20x15x10Gms.
ST
2.122
[30320x10 Cms,
374
213
[Erection of RS Joist pole /"H' Bearh/ steel tubular /stel rail pole of length 7
[metres but not exceeding 10 metres in cement concrete 1:3:6 (I cement 3
[core sand: 6 graded stone aggregate 40mm nominal size) base, foundation,
|mufting including excavation and back refilling etc. as required.
2984
a4
[Erection of RS Joist pole /"H Beam / steel tubular steel rll pole of lengih
lexceeding 10 metres but not exceeding 13metres in cement concrete M-10 (1
|cement:3 core sand: 6 graded stone aggregate 40mm nominal size) base,
foundation, muffing including excavation and back refiling ete. as required.
3624
28
Erection of R-C.CIP.C.C. pole of length & metres but not exceeding 11 metres]
in brick ballast and ramming the foundation including excavation and
refilling etc.as required
1400
ais
[Erection of RS Joist pole /W Beam steal tubular/ steel rallpole strat in
|ccment concrete 1:3:6 (Icement:3coarse sand:6 aggregate 40mm nominal
[size) foundation including excavation and refilling and secured with holding,
[clamps,nuits and bots, ec. as required.
2560
a9
[Erection of ROC/PCC pole strut_in brick ballast and)
ramming; the foundation including excavation and refilling and secured with
holding clamps nuts and bots etc. as requited.
1447
B2
Supplying and erection of stay set complete (Galvanized) Imm, Diax LB
Jmetre long stay rod anchor plate of size 300 mm x 300 mm x7.Smm, thimble,
stay clamps, tum buckle (19mm dia x 600mm),7/4,00mm dia Gul. Stay wie ete
in cement concrete M-10 (1 Cement : 3 Coarse sand 6 graded stone aggregate
[40mm nominal size) foundation including excavation and refilling ete. as
[required.
Each
3515
Kg
Page 16 of 22SNISOR
DESCRIPTION OF ITEMS
Unit,
Rate
2.21
Supplying and erection of stay set complete (Galvanized) with Y6mm dia x1.8
lmetre long stay anchor plate of size 200mm x 200mm x 6.0mm, thimble,
stay clarmps, tum buckle 1mmx600mm, 7/3.15mm dia Gi. stay wire etc in
Jcement concrete M-10 (1 Cement : 3 Coarse and : 6 graded stone
aggregate 40mm nominal size) foundation including excavation and refling
etc. as required.
2817
aa
Supplying and erection of stay set complete with 19720mm dia 1.8
metre lone stay rod, turn buckle, ancher plate of size 300mm x 300mm x
‘7smm, thimble, stay clamps, bow tightener, 7/4.00 dia G.l. stay wire ete.
jincerment eoncrete M-10 (1 Cement : 3 Coarse and : 6 granded stone
laggregate 40mm nominal size) foundation including excavation and back
lefilling ete. as required.
3398
ae
[Supplying and erection of stay set complete with T6mm.dia 1.8 metre long tay
rod, turn buckle, anchor plate of size 200mm x 200mm x 6.0mm, thimble
|stay clamps, bow tighten, 7/315 dia GL stay wire et. in cement concrete
IM-10 (1 Cement : 3 Coarse and :6 graded stone aggregate 40mm nominal size)
foundation including excavation and back refilling et. s required.
2695
a
[Erection of stay set complete in coment concrete M-10 (I Cement :3 coarse
sand : 6 graded stone aggregate 40mm nominal size) foundation including
Jexcavation and back refilling etc a required.
1636
25
[Supplying and erection of bow stay set complete (galvanized) with 19mm dia x
1.8m long stay rod, anchor plate of size 300mmx300mm x 7.5mm, thimble,
etay clamps, turn buckle 19mmx600mm, 7/4.00mm dia GL. stay wire and bow
hightener, ee. in cement concrete M-10 (1 Cement: 3 coarse sand :6 graded
stone aggregate 40mm nominal size) foundation including excavation and
lback refilling and also with 0.6m long brave of size SOmmxSOmmx6mm
langle iron with SOmm dia pulley fixed at one end ofthe brace as required.
Each
3161
[Supplying and erection of bow stay Sei complete (galvanized) wiith 16mm dia.
x 1.8m long stay rod, anchor plate of size 200mmx200mmx6.0mm, thimble,
stay clamps, turn buckle I9mmx600mm, 7.15 mm dia G.. Stay wire and bow
lighter, etc. in cement concrete M-10 (Ieement 3 coarse sand :6 graded
stone aggregate 40mm nominal size) foundation including excavation and back
refiling and also with 0.6m long brace of size SOmmxSOmmaxémm angle iron
ith 50mm dia pulley fixed at one end ofthe brace as required,
3067
Supplying and erection of bow stay set complete with 19mm diax 1.8m Tong
stay rod, anchor plate of size 300mmx300mm x 7.5mm, thimble, stay clamps,
tum buckle 19mmx600mm, 7/4.00mm dia G.l. stay wire and bow tightener,
lec. in cement concrete M-10 ( 1 Cement :3 coarse sand : 6 graded stone
laggregate 40mm nominal siz) foundation including excavation and back
refiling and also with 0.6m long brace of size SOmmx SOmmxémm angle iron
lich SOmm dia pulley fixed at one end ofthe brace as required.
3649
oe
Page 17 of 22SNSOR
DESCRIPTION OF ITEMS,
Unit
2.28
Supplying and erection of bow stay set complete with Ténm dia X 1.8m
long stay rod, anchor plate of size200mmx200mmx6.0mm, thimble, stay
Jclamps, turn buckle 9mmx600mm, 7/315 mim dia Gl. Stay wire and bow
tightenes. et. in cement concrete M-10 (cement :3 coarse sand :6 graded
stone aggregate 40mm nominal size) foundation including excavation and back
refilling, and also with 0.6m long brace of size SOmmxS0mmxémm angle iron
with 50mm dia pulley fixed at one end of the brace as required
2015
a9
[Supplying and erection of SOmm x 65mm shack
land straps etc a req
ulator with Gl Bolts, nus
Each
a3
| Supplying and erection of 75mm x 90mm shackle insulator with G.1. bolts, nuts|
land straps etc. as required.
70
ai
Supplying and erection of 1O0eT Oma sacle iar
[with G.I. bolts, nuts and straps etc. as required.
Bach
BR
[Supplying and erestion of Aluminium Knob / bobin with nut, bolls & Sraps
etc. as requited
4
B36
Supply, fabrication and erection of Angle/Chanel Flatiron fitting for over
head Tine & sub-station ete such as ‘Drbracket, cross arms, top clamp, "V
Jcross arms, Back/Support clamps or other similar work et. including nut
bolts of required size, making holes, fabrication, welding, cutting, etc. and
painting. with one coat of red oxide paint & two coat of aluminium paint as
required as per specification,
ph
55
37
[Labour charges for rection of Angle/ChanelFlat ron fiting for over head Tine
J& sub-station ete such as’ bracket, cross arms, top clamp, cross arms,
[Back/Support clamps or other similar work ete. including nut bolts of required
size, as required as per specification,
[Supplying and erection of 11kV Porcelain pin Insulator complete with Tong
[steel head Gi. pin, nut, washer etc. as required.
2a
BD
[Supplying and erection of 11kV Poreelain dist insulator for FIRV overhead
lines with galvanized insulator fittings, ball and socket type, and complete with
|galvanized strain clamp, bolts, nuts washer et, as required.
47
aa
[Supplying and erection of 33KV Porcelain pin insulator complete with Tong
steel head G.l. pin, nut, washer et. as
required
Each
453
[Supplying and erection ofa set of three TIKV porcelain disc Insulators Tor
[33kV overhead lines with galvanized insulator fittings, ball and socket type,
and complete with galvanized strain clamp, bolts, nuts, washers ete. as
required.
aa
[Supplying and erection of set of four TIKV porcelain dise insulators Tor 33RV
loveriead lines with galvanized insulator fittings, ball and socket type, and
Jcomplete with gelvanized strain clamp, bolts, nuts, washers et, as required.
Bas
[Labour for erection of TI/3KV Pore
hardware as required.
‘in insulator complete with
aaa
[Labour for erection of TTRV Porcela
Jcomplete wit hardware as required,
ise insulator for T1kVoverbead lines
aS
[Labour for erection of a set of three! four TIKW porcelain disc Insulators Tor
[33kV overhead lines complete with hardware as required.
197
[Supplying and erection of TIkV (5 KN) Polymer pin insulator complete with
long stee! head G.. pin, nut, washer te, as required.
hh
Page 18 of 22SNSOR
DESCRIPTION OF ITEMS,
Unit
Rate
AT
Supplying and erection of 11kV (45 KN) Polymer dise insulator for TIKV
loverhead lines with galvanized insulator ings, ball and socket type, and
[complete with galvanized strain clamp, bolts, nuts washer ec, as required.
364
Supplping and erection of 33KV (10 KN) Polymer pin insulator complete
with long steel head Gl pin, nut, wesher ee. as required
387
a8
Supplying; and erection of 33KV (45 KN) Polymer disc insulators for
I33KV overhead lines with galvanized insulator fittings, ball and socket type,
Jand complete with galvanized strain clamp, bolts, nuts, washers eo. a8
required.
395
as
Labour for erection of TI/S3KV Polymer pin insulator complete with
hardware as required.
aa
[Labour for erection of T1/33KV Polymer Disc insulator complete with
hardware as required.
BI
an
[Supplying and erection of single piece non linear resistor
lype lighting arrestor (Set of 3 Nos) for 3 wire, 1TKV overhead lines/sub-station|
|with rated voltage of 9KV (rms) with a discharge current rating of
IS KA and complete with galvanized clamping arrangement, Gl. bolts, nuts,
lwasher etc. as required.
3052
as
[Supplying and erection of single piece nor-linear resistor type lightning
farestor (Set of 3 Nos.) for 3 wire, 33kVoverhead lines/sub-station with
ated voltage of 30kV (rms) with @ nominal discharge current rating of 5
IKA and complete with galvanized clamping arrangement, Gl. bolts, nuts,
lwasher etc. as required.
28320,
ase
[Supplying and erection of single plece non linear resistor
818
[polymer type lighting arrestor Set of 3 Nos) for 3 wire, TIkV overhead
Iines/sub-station with rated voltage of 9KV (rms) with a nominal discharge
current rating of 10 KA and complete with galvanized clamping arrangement,
IG. bolts, nuts, washer etc. as required,
3279
B58
[Supplying and erection of single piece now Tinea esisior polymer type
ighining arrestor (Se of 3 Nos.) for 3 wire, 33KV overhead lines/ substation
wth rated voltage of 27KV (rms) witha nominal discharge current rating of 10
cA and complete with galvanized clamping arrangement, G. bolts, nuts,
washer etc s required,
set
32405
Wa56
Supplying Instaling, testing & commissioning of outdoor H.T., AB switch
lassembly set gang operated with brass contact parts, including required GI
lpipe operating rod handle & locking arrangement on On-Off position
lconforming t0 IS complete with required material and installing on existing]
DP siructure to complete the job as required as per specification (Set of 3 nos.)
S61
TT RV, 4004.
G59.
2.56.2
[33KV, 600A.
set
1916
57
[Supplying installing, texting & commissioning D.O. fuse assembly with brass
lpart contact for 33 or 11/0.4 KV DP Structure set of 3 Nos. with fuse berrel Ue
required fuse element & other materials a per specification on existing D.P.
structure as required.
asi
TeV
ae
2.572
s3kV.
a)8
13037
[Supplying & replacement of D.O. fuse barel with brass pars for 33 or 1T
IKV i/c required fuse element according to load 9s per specification on
lexisting D.P. structure as required.
BaB.i
TRV
Tack
8
58.2
isakV.
Each
or
Spel
Page 19 of 22,DESCRIPTION OF ITEMS,
Unie
Supply ing & replacement of D.O. fuse barrel for 33 or IT KW as per
specification on existing D.P, structure as required.
ik
137
B3KV
Hi
224
Supplying & replacement of D.O. fuse element according to Toad for 33 or TT
IKV as per specification on existing D.P. structure as required.
TRY.
a
s3kV
Each
7
[Supply & fixing anti climbing device with 2 ply Gl. barbed wire | Ke. per pole
lcomplete as per specification
13,
Supply. laying and fixing of G1. earth coll of 4mm dia GL. wire having 120
[tums of nearly $Omm dia. and 3 mt. long til in existing pit duly earthed with
Jpole ete complete as required as per specification.
[Supplying and fixing 33/11/0.4 KV enamel coated danger board size
[200x250mm with clamp on existing HT/LT structure / poles.
133,
B57
Shifting. erection, & commissioning of of 100/ 200/315 /500 KVA
|(11/0.433 KY) disuibution transformer on existing structure including Bi-
metallic clamp, ACSR/AAAC Conductor ile colour code sleeve, for connection
from H.T:Line to transformer as required as per specification
Bach
7372
[Supplying and fixing Limit switch with accessories & arangement on
Jexisting HT/LT structure / poles AB switch handle for inter locking. between
Jdistibution pane! main incoming LT switch gear system as required to.
Jcomplete the job.
ae
Supply & fixing fencing of chain link mesh 100x 100mm, 12 SWG Gl wire
for for D.P. structure eletric sub-station including single post of angle iron size
[50xS0xSmm, 2.5 mt long should be provided up to 2.00 mi. apart or as
required. The panel frame with required angle iow flat iron members/coss
|members including mesh welded in frame panel, shall be erected between’
the post. The anal iron post shall be erected in cement concrete 1:24 (20 mm
leraded metal foundation, including excavation of pit and refilling the same The
fencing shall be provided with one entrance gate including locking arrangement
las required as per specification The height of fencing shall be 2 mt above
leround level. Fencing shall be painted with required shade,
a7
Supply & fixing fencing of chain Tink mesh 100x100 mm,12 SWG GI wie
for electric sub-station switch yard including single post of angle ion size
}50x50xSmm, 2.5 mt long should be provided up to 2.00 mt. apart or as required
with required angle iron/ flat iron members /cross members for frame between
the post & welded mesh including cement concrete, excavation of pit and
refiling the same . The fencing shall be provided with one entrance gate
including locking arrangement as required as per specification. The height of
fencing shall be2 mt. above ground level. Fencing shall be painted with
required shade
sgt
W283
[Collection and spreading of metal dust, Murom and 40mm graded hard metal Tn]
|sub-station yard or as required as mentioned below -
Bai
[@) Metal Dust
Peunt
7a
2.83.2
Prout
342
2.833
pleut
78
Page 200f 22‘SWSOR DESCRIPTION OF ITEMS Unit Rate
SOR ravine & drawing Tayng of PVC insulated XLPE Aerial bunch Power
eae oncluctor HOA grade Aluminium Soli stranded confiming 1 1S
\ooo8 Part-il, Alu. Alloy messenger of approved make in Air with necessary
Vrateril as per specification of required size as mentioned below —
FasaA_ [IKV grade Arial Bunch Cable =
Fasid | 3x50 1x 70 sqm, PME, 20
sada | 3x04 1x70 sqmm, PMU 950
‘s413 | 3295+ 1x 80 sqm. PME THO.
‘asia | 3x150 + 1x 120sqmm. Mu 1440
42.842 _ [S3KV grade Arial Bunch Cable :-
2342.1 | 3X30 sqmm. PM Ta
2842.2 | 3X95 samm. PMU 1802
2842.3 | 3X 150 sqm, PM 2213,
Page 21 of 22‘SNSOR DESCRIPTION OF ITEMS: Unie Rate
42.88 [Supplying & drawing laying of PVC insulated XLPE Aerial bunch power
[esble conductor H2/H4 grade AluminiumSolidstranded confirming to 1S-
14255 1995, Alu, Alloy insulated messenger 1100 volts grade cable of
aperov edimake in Air with necessary material a per specification of required
[size as mentioned below —
42.85.1 _|()Singile Core cable( insulated neutral messenger)
42:88:11 [() 2X25 Samm, 1x16( Insulated neutral messenger) PM 138,
42.88.1.2 (6) 243 5 Sqm, 1x16( Insulated neural messenge PM 163
42.852 |i) Single Core cable( Insulated neutral messenger)
428521 {(o) x25 Sqamm, K1G(SLLIgh), 135% Inslated neutral mesenge) PM 187,
2852.2 |() 3x35 Sqm, x16(StLigh), 1x35 Insulated neutral messenge) PM 190)
42.8523 {(o) 3x50 Sqm, 1x16(StLigh), 135( Insulated neutral messenge) PM 259)
42.85.24 |()3x70 Sqamm, 1x16(St-Ligh), 1x35( Insulated neutral messenger) PM 351
42.8525 [(o) 3x95 Sqmm, Ix16(St.Light), 150( Insulated neutral messenger) PM 326
42.852.6 {(0 3x120 Sq.mm, 1x16(SLLigh), 1x70( Insulated neutral messenger) PMt 33
42.8527 |(g) 37150 Sq.mm, 1x35(StLigh, 1x95( Insulated neural messenger) PMt 802
42.86 [Supplying & fixing of Aerial bunch cable accessories suspension clamps
ve required attachment for single core cable of approved make on pole with
clamp, necessary material as per specification for required size.
42.87 [Supplying & fixing of Aerial bunch cable acoessorlesTension
clamps(Dead end) i/e required attachment for single core cable of approved
make in Air with clamp, necessary material as per specification for required
size. Each 334
42.88 Supplying & Tixing of waterproof Insulation Piercing connccior Tor
}Actial bunch cable Ve required attachment fr single core cable of approved
Jmake in Air with nécessary material as per specification of required,
mentioned below ~
42.88.1 [Main:16-953q mm, Tap: 1.5-50sqanm z ace mm
[42.88.2|Main: 50-1505q.mm, Tap: 650sq.mm Each 138
42.89 Supplying & fixing of Spring loaded bus bar screw less connector with
Jenclosure of approved make including required clamps, nut, bot, connection,
testing as per specification to complete the job.
2.99.1 |Single Phase
42.89.1.1 [IPh, lint20ut Each 1930
Ph, 1in#30ue Each 1984
42.59.1.3 [1Ph, lint4Out Each 2e71
42.89.1.4 [1Ph, TintSOut Each 3029.
42.89.15 |1Ph, Hn+7Out Each 3187
42.59.1.6 [1Ph, Hint 8Out Each 3301
42.592 [Three Phase
2.1_[3Ph, 1in+20u8 Each 675
42.89.2.2_[3Ph, UntOut ‘Each S717
42.89.2.3,|[3Ph, 1In*+60ut Each 7501
42.99.24 [3Ph, 1in+70ut Each 7109
42.89.25 [3Ph, 1In*8Out Each 7917
(Rates rounded off after deduction 10% rates to nearest rupee)
nao 0
(Chandra Prake arwal) ve io
Aigo rgheero-Chet
MP PWD, Bhopal
Page 22 of 22Endt. No. SOR/Road/Comm./2019/ 3144 Bhopal, dated 23 /1//2020
Copy i is forwarded to:
PA to Hon'ble Minister,PWD Bhopal.
The Principal Secretary, Govt. of M.P. MP PWD, Bhopal.
The Director General (Road Development), Ministry of Road Transport
& Highway (Road Wing), Transport, New Delhi.
‘The Secretary to the Govt. of MP PWD, Bhopal.
The Chief Technical Examiner, MP Bhopal.
The Commissioner, Housing & Environment, Bhopal.
The Accountant General, MP Gwalior/ Bhopal.
The Secretary, Lokayukta, MP Bhopal.
‘The Engineer in Chief, MPRDC, Bhopal.
‘The Engineer in Chief, Rural Engineer Services MP Bhopal.
All Chief Engineers MP PWD.
The Superintending Engineer, Capital Project Circle, CPA Bhopal.
All Superintending Engineer MP PWD,
All Executive Engineer, MP PWD.
(Chandra PYakash Agarwal)
Engineer-in-Chief
MP PWD, Bhopal