Professional Documents
Culture Documents
Rule Dimensions: S.No. Item Symbol Formulae Value Units
Rule Dimensions: S.No. Item Symbol Formulae Value Units
Materials of Construction.
S.No. Item Symbol Formulae Value Units
1 Material Factor For Ordinary Structural
K 1
Steel.
principal for scantlings and structure details
S.No. Item Symbol Formulae Value Units
1 Frame Spacing.
Frame Spacing Betweent aft peak and 0.2L
from F.P
Transverse Framing 450 + 2L 1015 mm
Longitudinal Framing 550 + 2L 1115 mm
In peaks and Cruiser Stern 600 mm
Between Collosion Bhkd. and 0.2L from F.P 700 mm
Frame Spacing
Parameter Values Units Values Units
Transverse Longitudinal
Spacing Spacing
1050 mm 1150 mm
Spacing between aft peak and 0.2L from forward
800 mm 900 mm
S.N
Symbol Formulae Value Units
o. Item
1) Still Water Bending
Moment
The still water bending
momentis taken as
MS KN-m
greater of the hogging
or sagging
The design still water
bending moment
amidships
( Sagging ) are
M sw−s−min −0.85 f sw ( 171C W L2 B ( C B + 0.7 ) 10−3− M wv−s−mid
KN-m)
normally not to be
taken lessthan
The design still water
bending moment
amidships ( Hogging) M sw−h−min f sw ( 171C W L2 B ( C B + 0.7 ) 10−3 −M wv−h−mid ) KN-m
are normally not to be
taken lessthan
Wave coefficient CW 10.75 300< L ≤350
Distribution factor f sw 1 For the
along the ship length midship
section
Vertical wave
2)
bending moment
Hogging M wv−h fR 2
0.19 × f f f C L B CB
0.85 nl−vh m p W
Sagging M wv− s fR 2
−0.19 × f nl−v s f m f p CW L B C B
0.85
2) Still water shear force
Values, at a
preliminary stage, the
hull girder positive and
negative vertical still
water shear force, in
seagoing conditions
may be taken as
Qsw− pos−min 5 f qs M sw−min
L
Qsw−¬−min −5 f qs M sw−min
L
Vertical wave shear
3)
force
The vertical wave shear Q sw − pos−min
forces at any 0.52 f q− pos f p ∙ CW L ∙ B ∙C B
longitudinal position,
Qsw−¬−min −( 0.52 f q− pos f p ∙C W L∙ B ∙ C B)
Horizontal wave
4)
bending moment
The horizontal wave M wh L
bending moment at any
longitudinal position
(
f p 0.31+ )
f C L2 T LC C B
2800 m W
coefficient for f p=f ps 1
strength assessment
coefficient for
fatique assessment
Distribution factor fm 1
(for hogging-pos)
(for sagging-neg)