Professional Documents
Culture Documents
Berudraw AL 20: Safety Data Sheet
Berudraw AL 20: Safety Data Sheet
1 Identification
Product identifier
Trade name: Berudraw AL 20
Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses: Lubricant
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
CARL BECHEM GMBH
Weststraße 120
58089 Hagen, Germany
Phone +49 2331 935-0
Fax +49 2331 935-1199
Email: bechem@bechem.de
http://www.bechem.com
Information department: product safety department : ps@bechem.com
Emergency telephone number:
USA and Canada to Germany: 011 + 49 2331 935-1500
Mexico to Germany: 00 + 49 2331 935-1500
Code: 9795002
* 2 Hazard(s) identification
Classification of the substance or mixture
The product is not classified according to the Globally Harmonized System (GHS).
Label elements
GHS label elements Void
Hazard pictograms Void
Signal word Void
Hazard statements Void
Classification system
NFPA ratings (scale 0-4)
Health = 0
Fire = 1
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Additives in mineral oil.
Dangerous components:
68411-46-1 Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene < 1.0%
4 First-aid measures
Description of first aid measures
General information Immediately remove any clothing soiled by the product.
After inhalation Supply fresh air.
After skin contact
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
After eye contact Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing Seek medical treatment.
Information for doctor
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed No further relevant information available.
(Contd. on page 2)
41.1.0
Page 2/4
Safety Data Sheet
acc. to US-OSHA HCS
Printing date 07/13/2015 version 3 Reviewed on 07/13/2015
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents
CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents Water with full jet.
Special hazards arising from the substance or mixture carbon monoxid (CO) and carbon dioxid (CO₂)
Advice for firefighters
Protective equipment:
Do not inhale explosion gases or combustion gases.
Wear self-contained respiratory protective device.
Wear fully protective suit.
Additional information Cool endangered receptacles with water spray.
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Particular danger of slipping on leaked/spilled product.
Environmental precautions: Do not allow product to reach sewage system or any water course.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
Handling
Precautions for safe handling Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: Store only in the original receptacle.
Information about storage in one common storage facility: Store away from oxidizing agents.
Further information about storage conditions: None.
Recommended storage temperature: Room temperature
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems: No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the
workplace.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures should be adhered to when handling the lubricant.
Breathing equipment:
Use suitable respiratory protective device only when aerosol or mist is formed.
Respiratory protection in case exceed the exposure limit value.
Protection of hands: Protective gloves.
Material of gloves Nitrile rubber, NBR
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Not suitable are gloves made of the following materials:
Leather gloves
Strong gloves
Eye protection: Safety glasses
Body protection: Protective work clothing.
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Color: Yellow-brown
(Contd. on page 3)
41.1.0
Page 3/4
Safety Data Sheet
acc. to US-OSHA HCS
Printing date 07/13/2015 version 3 Reviewed on 07/13/2015
12 Ecological information
Toxicity
Aquatic toxicity: No further relevant information available.
Persistence and degradability No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential No further relevant information available.
Mobility in soil No further relevant information available.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT, ADR, ADN, IMDG, IATA none
UN proper shipping name
DOT, ADN, IMDG, IATA none
(Contd. on page 4)
41.1.0
Page 4/4
Safety Data Sheet
acc. to US-OSHA HCS
Printing date 07/13/2015 version 3 Reviewed on 07/13/2015
41.1.0