Professional Documents
Culture Documents
Installation Instructions For Pharmaceutical-Grade Pleated Filters
Installation Instructions For Pharmaceutical-Grade Pleated Filters
for Pharmaceutical-Grade
Pleated Filters
1 - Product Acceptance
• Please check and make sure that packaging is clean and • Store the filters in a cool, dry, and clean environment.
closed (intact) and confirm that the type and quantities of the • Please note that the shelf life is 3 years.
filter meet all requirements.
2 - Filter Use
Prior to installation, you
Please ensure that the internal packaging is clean
MUST pre-wet the O-Ring
and verify the filter model and product number.
to facilitate installation.
Lugs incorrectly
positioned
We RECOMMEND doing a pre-flush treatment prior to filtering. Please note: This is ONLY suitable for liquid filter housings.
• Recommended Flush Time is 5min. Use the suitable pressure and temperature range highlighted
• Flush Volume is 20L/min per 10 inch filter. in the filter Quality Insurance Certificate. Filter pressure
endurance ability will reduce when temperature is increasing.
Please note: Flushing time and volume CAN BE adjusted per
Avoid large differential pressure changes on filters.
application requirements.
When used for gas filtration applications, condensate water
Open the exhaust value when filtering has begun to remove
MUST be drained.
gas. When liquid starts to flow from the outlet, tighten the
exhaust valve.