Professional Documents
Culture Documents
Finger Print Guide
Finger Print Guide
Rev 1.0
Logging on Using Your Fingerprint
You can use Windows Hello provided by Microsoft Windows to log on to the 3 Press the [Add] button under the
Windows system using your fingerprint. [Password] menu to set the password.
To use the fingerprint recognition function, Windows should be installed in your
PC. Also, you should set the password for your Windows account.
Register your fingerprint according to the following procedure.
NOTES
yy Figures shown here may differ from the actual figures depending on the Step 2. Set the PIN
Windows version.
yy When you set and use the fingerprint recognition function, make sure that there PIN is a password for identifying the user separately from the Windows account
is no foreign substance on your finger.
password.
yy The biometrics data used for fingerprint recognition is only saved in a local
storage device and is not transmitted to an external device or server. If you fail to log on using your fingerprint, you can use the PIN to log on.
Step 1. Set your Windows account password 1 Press the [ ] button and select the
[( ) Settings] menu.
If you use a Windows Live account or if a password is already set, you don't need 2 When the [Settings] screen appears,
to go through this procedure. select [Accounts] > [Sign-in options].
1 Press the [ ] button and select the 3 Press the [Add] button under the
[( ) Settings] menu. [Windows Hello PIN(or PIN)] menu to
2 When the [Settings] screen appears, set the password.
select [Accounts] > [Sign-in options].
Step 3. Register your fingerprint 6 Register your fingerprint according to the instructions displayed on the screen.
(When registering your fingerprint, you need to touch the fingerprint sensor
“approx. 10 times” and it may take some time.)
1 Press the [ ] button and select the
yy If you want to register another fingerprint after completing the fingerprint
[( ) Settings] menu. registration, press the [Add another finger] button to register it.
2 When the [Settings] screen appears, select 7 Once the fingerprint registration is complete, press the [Close] button.
[Accounts] > [Sign-in options].
5 When the screen asking for your fingerprint appears, place your finger on the
power button/fingerprint sensor at the top right of the product.
yy Press [Sign-in options] to select the login method (password, PIN, and fingerprint).
1 Press the [ ] button and select the [( ) Settings] menu. 5 When the screen asking for your fingerprint appears,
place your finger on the power button/fingerprint sensor
2 When the [Settings] screen appears, select [Accounts] >
at the top right of the product.
Logging on Using Your Fingerprint [Sign-in options].
You can use Windows Hello provided by Microsoft Windows to log on to the Windows system using your fingerprint.
To use the fingerprint recognition function, Windows should be installed in your PC. Also, you should set the password for
your Windows account.
Register your fingerprint according to the following procedure.
3 Press the [Set up] button under the [Windows Hello
1 Set your Windows account
password 2 Set the PIN 3 Register your
fingerprint 4 Log on using your
fingerprint Fingerprint (or Fingerprint)] menu. 6 Register your fingerprint according to the instructions
displayed on the screen.
(When registering your fingerprint, you need to touch
NOTES the fingerprint sensor “approx. 10 times” and it may
take some time.)
yy Figures shown here may differ from the actual figures depending on the Windows version.
yy When you set and use the fingerprint recognition function, make sure that there is no foreign substance on your finger. yy If you want to register another fingerprint after
completing the fingerprint registration, press the [Add
yy The biometrics data used for fingerprint recognition is only saved in a local storage device and is not transmitted to an another finger] button to register it.
external device or server.
7 Once the fingerprint registration is complete, press the
[Close] button.
Step 1. Set your Windows account password
4 When the Start Windows Hello screen appears, press
If you use a Windows Live account or if a password is already set, you don't need to go through this procedure. the [Get started] button.
1 Press the [ ] button and select the [( ) Settings] 3 Press the [Add] button under the [Password]
menu. menu to set the password.
2 When the [Settings] screen appears, select [Accounts] >
[Sign-in options].
PIN is a password for identifying the user separately from the Windows account password.
If you fail to log on using your fingerprint, you can use the PIN to log on.
3 Press the [Add] button under the [Windows Hello PIN(or PIN)]
menu to set the password. When an error occurs during login using your fingerprint
Q: An error message, "Cannot recognize the fingerprint. Check if you set your fingerprint in Windows Hello." appears.
A: This error message may appear when the system cannot recognize your fingerprint. Touch the fingerprint sensor
again to log on to Windows.
Étape 3. Enregistrez vos empreintes digitales
1 Appuyez sur le bouton [ ] et sélectionnez le menu 5 Lorsque l’écran vous demandant vos empreintes digitales
[( ) Paramètres]. apparaît, placez votre doigt sur le bouton d’alimentation
Connexion à l’aide de vos empreintes digitales 2 Lorsque l’écran [Paramètres] apparaît, sélectionnez ou le capteur d’empreintes en haut à droite du produit.
[Comptes] > [Options de connexion].
Vous pouvez utiliser Windows Hello fourni par Microsoft Windows pour vous connecter au système Windows au
moyen de vos empreintes digitales.
Pour utiliser la fonction de reconnaissance d’empreintes digitales, Windows doit être installé sur votre ordinateur. En
outre, vous devez définir le mot de passe de votre compte Windows.
Enregistrez vos empreintes digitales selon la procédure suivante.
Enregistrez Connectez-vous en 3 Appuyez sur le bouton [Configuration] sous le menu
1 Définissez le mot de passe
de votre compte Windows 2 Définissez
code NIP
le
3 vos empreintes
digitales 4 utilisant
digitales
vos empreintes [Reconnaissance des empreintes digitales Windows
Hello (ou Empreintes digitales)].
6 Enregistrez vos empreintes digitales en suivant les
instructions affichées à l’écran.
(Lorsque vous enregistrez vos empreintes digitales, vous
REMARQUES avez besoin de toucher le capteur d’empreintes digitales
environ 10 fois, et cela peut prendre un peu de temps.)
yy Les images présentées ici peuvent différer des images réelles en fonction de la version de Windows. yy Si vous souhaitez enregistrer d’autres empreintes digitales
yy Lorsque vous définissez et utilisez la fonction de reconnaissance d’empreintes digitales, assurez-vous qu’il n’y a pas de après avoir terminé l’enregistrement, appuyez sur le
corps étranger sur votre doigt. bouton [Ajouter un autre doigt] pour les enregistrer.
yy Les données biométriques utilisées pour la reconnaissance sont uniquement enregistrées dans un périphérique de 7 Une fois l’enregistrement des empreintes digitales
stockage local et ne sont pas transmises à un périphérique externe ou à un serveur.
terminé, appuyez sur le bouton [Fermer].
Étape 1. Définissez le mot de passe de votre compte Windows 4 Lorsque l’écran Démarrer Windows Hello apparaît,
appuyez sur le bouton [Mise en route].
Si vous utilisez un compte Windows Live ou si un mot de passe est déjà défini, vous n’avez pas besoin de suivre cette procédure.
1 Appuyez sur le bouton [ ] et sélectionnez le menu [( ) 3 Appuyez sur le bouton [Ajouter] sous le menu
Paramètres]. [Mot de passe] pour définir le mot de passe.
2 Lorsque l’écran [Paramètres] apparaît, sélectionnez
[Comptes] > [Options de connexion].
Le NIP est un mot de passe permettant d’identifier l’utilisateur séparément du mot de passe du compte Windows.
Si vous ne parvenez pas à vous connecter avec vos empreintes digitales, vous pouvez utiliser le code NIP pour vous connecter. Pour vous connecter, numérisez votre doigt
sur le lecteur d’empreinte digitales.
Options de connexion
NOTAS
yy As ilustrações apresentadas aqui podem diferir das imagens reais, dependendo da Etapa 2. Defina o PIN
versão do Windows.
yy Ao definir e utilizar a função de reconhecimento de impressões digitais, confira se não
há nenhuma substância estranha em seu dedo. O PIN é uma senha para identificação do usuário separadamente da senha da conta
yy Os dados de biometria utilizados para reconhecimento de impressões digitais só podem do Windows.
ser salvos em um dispositivo de armazenamento local e não serão transmitidos para Se não conseguir fazer logon através da impressão digital, você pode utilizar o PIN
um dispositivo ou servidor externo.
para essa finalidade.
5 Quando aparecer a tela solicitando sua impressão digital, posicione o dedo sobre
o botão Liga-Desliga/sensor de impressões digitais, na parte superior direita do
yy Pressione [Opções de entrada] para selecionar o método de logon (senha, PIN e
produto. impressão digital).
1设置Windows
帐户密码 2 设置PIN 3 注册指纹 4 使用指纹
登录
注意
yy以下图例可能不同于实际显示情况,这取决于您的 第2步.设置PIN
Windows版本。
yy设置并使用指纹识别功能时,请确保手指上没有杂物。 PIN是一种密码,它有别于Windows帐户密码,也可用于识
yy指纹识别的生物数据资料,仅在本地存储设备保存,不会 别用户。
传输至外部设备或服务器。 如果指纹登录失败,您可以使用PIN登录。
第1步.设置Windows帐户密码 1 按[ ]按钮,然后选择[( )
如果您使用Windows Live帐户或是已设置密码,则可以跳 设置]菜单。
过此步骤。 2 当显示[设置]屏幕时,
选择[帐户]>[登录选项]。
1 按[ ]按钮,然后选择[( )设
3 按[Windows Hello PIN(或PIN)]
置]菜单。
菜单中的[添加]按钮,设置密
2 当显示[设置]屏幕时, 码。
选择[帐户]>[登录选项]。
第3步.注册指纹 6 按照屏幕上显示的说明注册指纹。(注册指纹时,您需要触
摸指纹传感器“约10次”,可能需要一些时间。)
1 按[ ]按钮,然后选择[( )设置] yy如果在完成指纹注册后还需要注册另一个指纹,按[添加其
他手指]按钮进行注册。
菜单。
7 完成指纹注册后,按[关闭]按钮。
2 当显示[设置]屏幕时,
选择[帐户]>[登录选项]。
㤕㾱ⲫᖅˈ䈧൘ᤷ㓩ਆಘк䘋㹼ᤷᢛ
5 当屏幕要求您提供指纹时,将手指放在产品右上角的电源按钮 ᧿
ⲫᖅ䘹亩
/指纹传感器上。
yy按[登录选项]选择登录方法(密码、PIN和指纹)。
使用指纹登录时出错
问:显示错误消息,“无法识别指纹。请检查是否已在
Windows Hello中设置指纹。”
答:当系统无法识别您的指纹时,可能出现此错误消息。
再次触摸指纹传感器即可登录Windows。
使用指紋登入
您可以使用 Microsoft Windows 提供的 Windows Hello,使用指紋登入 3 按下 [密碼] 功能表下方的 [新增] 按鈕
Windows 系統。 以設定密碼。
若要使用指紋辨識功能,PC 上應安裝 Windows。此外,您應為 Windows 帳
戶設定密碼。
請根據下列程序,註冊您的指紋。
1 設定 Windows 帳戶
密碼 2 設定 PIN
3 註冊您的指紋
4 使用指紋登入
附註 步驟 2.設定 PIN
yy 視 Windows 版本而定,下圖可能與實際圖片不同。
yy 當您設定與使用指紋辨識功能時,請確認您的手指上沒有任何異物。 除了 Windows 帳戶密碼外,PIN 是另一個用來辨識使用者身份的密碼。
yy 指紋辨識的生物辨識資料僅在本機儲存裝置存放,不會傳輸到外部裝 如果您使用指紋登入失敗,您可以使用 PIN 來登入。
置或伺服器。
1 按下 [ ] 按鈕並選擇 [( ) 設定]
步驟 1.設定 Windows 帳戶密碼 功能表。
如果您使用 Windows Live 帳戶或已設定密碼,就不需要再執行這個步驟。 2 出現 [設定] 畫面時,選擇 [帳戶] >
[登入選項]。
3 按下 [Windows Hello PIN(或PIN)] 功能
1 按下 [ ] 按鈕並選擇 [( ) 設定]
功能表。 表下方的 [新增] 按鈕以設定密碼。
步驟 4.使用指紋登入
Windows 登入畫面出現時,使用您的手指登入 Windows 帳戶。(如果您未
確實將手指放置在感應器上,指紋辨識可能失敗。確認您已確實將手指放
4 出現開始 Windows Hello 畫面時,按下 在感應器上。)
[開始] 按鈕。 指紋辨識失敗時,您可在 PIN 輸入畫面中輸入 PIN 來登入。
勌奨䙢⅌Ə媲✏㋮䳲徐嬿♏ᷱ㍪㎶わ䙫㈲
㋮˛
䙢⅌恟柬
5 出現要求您提供指紋的畫面時,將手指放在產品右上方的電源按鈕/指
紋感應器上。
yy 按下 [登入選項] 選擇登入的方法(密碼、PIN 和指紋 )。
使用指紋登入發生錯誤時
問:出現「無法辨識指紋,請檢查 Windows Hello 中設定的指紋。」錯誤
訊息。
答:當系統無法辨識您的指紋時,可能會出現這個錯誤。請再次觸碰指紋
感應器以登入 Windows。
指紋認証でログインする方法
Microsoft Windows が提供する Windows Hello を使用して、指紋認証で 3 [パスワード] メニューの下にある
Windows システムにログインできます。 [追加] ボタンを押してパスワードを設
定します。
指紋認証機能を使用するには、お使いの PC に Windows をインストール
し、Windows アカウントにパスワードを設定する必要があります。
指紋の登録は、次の手順で行います。
Windows アカウント
1 のパスワード設定 2 PIN の設定
3 指紋登録
4 指紋でログイン
メモ
yy 本書で使用される図は、Windows のバージョンによって実際とは異なる場合 手順2. PINを設定する
があります。
yy 指紋認証を設定して使用するときは、指に汚れや異物がないことを確認してく
ださい。 PIN は、Windows アカウントのパスワードとは別にユーザーを特定するための
yy 指紋認証で登録された生体認証データは、お使いのパソコンのみに保存され パスワードです。
ます。外部デバイスやサーバーには送信されません。
指紋でログインできない場合、PINを使用してログインします。
手順4. 指紋を使ってログインする
Windows のログイン画面が表示されたら、指を使って Windows アカウントにログイ
ンします。(センサーの上に指を正しく置かないと、認証できません。指をセンサーの上
4 Windows Helloのスタート画面が表示され に正しく置いてください。)
るので、[開始する] ボタンを押します。
指紋認証に失敗した場合、PIN 入力画面で PIN を入力してログインしてください。
サインインするには、指紋リーダーで指をスキャンして
ください。
サインインオプション
5 指紋を求める画面が表示されたら、製品の右上にある電源ボタン/指紋セ
ンサーに指を置きます。 yy [サインイン オプション] を押してログイン方法 (パスワード、PIN、指紋) を選択
します。
指紋でのログイン時にエラーが発生した場合
質問:
「指紋を認証できません。Windows Hello で指紋を設定したかどうかを確認
してください」
というエラーメッセージが表示される。
回答:このエラーメッセージは、システムが指紋を認証できないときに表示される
ことがあります。もう一度、指紋センサーにタッチして Windows にログイン
してみてください。
Đăng nhập bằng dấu vân tay của bạn
Bạn có thể sử dụng Windows Hello được cung cấp bởi Microsoft Windows để đăng 3 Nhấn nút [Thêm] bên trong menu [Mật khẩu]
nhập vào hệ thống Windows bằng dấu vân tay của bạn. để thiết lập mật khẩu.
Để sử dụng chức năng nhận dạng dấu vân tay, Windows cần phải được cài đặt trên
PC. Đồng thời bạn phải thiết lập mật khẩu cho tài khoản Windows.
Đăng ký dấu vân tay của bạn theo quy trình sau.
Thiết lập mật khẩu Đăng ký dấu Đăng nhập bằng
1 cho tài khoản
Windows 2 Thiết lập mã
PIN 3 vân tay của
bạn 4 dấu vân tay của
bạn
LƯU Ý
yy Hình ảnh được thể hiện ở đây có thể khác với hình ảnh thực tế tùy thuộc Bước 2. Thiết lập mã PIN
vào phiên bản Windows.
yy Khi bạn thiết lập và sử dụng chức năng nhận dạng dấu vân tay, hãy đảm
bảo rằng không có chất lạ trên ngón tay của bạn. Mã PIN là mật khẩu để xác định người dùng riêng biệt với mật khẩu của tài khoản
yy Dữ liệu sinh trắc học được sử dụng để nhận dạng vân tay chỉ được lưu Windows.
trong thiết bị lưu trữ cục bộ và không được truyền tới thiết bị hoặc máy chủ Nếu bạn không thể đăng nhập bằng dấu vân tay, bạn có thể sử dụng mã PIN để
bên ngoài. đăng nhập.
Bước 1. Thiết lập mật khẩu cho tài khoản Windows 1 Nhấn nút [ ] và chọn menu [( ) Cài đặt].
2 Khi màn hình [Cài đặt] xuất hiện, chọn
Nếu bạn sử dụng tài khoản Windows Live hoặc nếu mật khẩu của bạn đã
[Tài khoản] > [Tùy chọn đăng nhập].
được thiết lập, bạn không cần thực hiện thủ tục này.
3 Nhấn nút [Thêm] trong menu [Mã PIN của
1 Nhấn nút [ ] và chọn menu [( ) Cài đặt]. Windows Hello(hoặc PIN)] để thiết lập mật
2 Khi màn hình [Cài đặt] xuất hiện, chọn khẩu.
[Tài khoản] > [Tùy chọn đăng nhập].
Bước 3. Đăng ký dấu vân tay của bạn 6 Đăng ký dấu vân tay của bạn theo hướng dẫn được hiển thị trên màn hình.
(Khi đăng ký dấu vân tay, bạn cần chạm vào cảm biến dấu vân tay "khoảng 10
lần" và có thể mất một chút thời gian.)
1 Nhấn nút [ ] và chọn menu [( ) Cài đặt].
yy Nếu bạn muốn đăng ký một dấu vân tay khác sau khi hoàn thành việc đăng ký dấu vân
2 Khi màn hình [Cài đặt] xuất hiện, chọn tay, nhấn nút [Thêm một ngón tay khác] để đăng ký dấu vân tay.
[Tài khoản] > [Tùy chọn đăng nhập]. 7 Sau khi hoàn thành việc đăng ký dấu vân tay, nhấn nút [Đóng].
5 Khi màn hình yêu cầu dấu vân tay xuất hiện, đặt ngón tay của bạn lên nút
nguồn/cảm biến dấu vân tay ở phía trên bên phải của sản phẩm.
yy Nhấn [Tùy chọn đăng nhập] để chọn phương pháp đăng nhập (mật khẩu,
mã PIN và vân tay).
Khi có lỗi xảy ra trong quá trình đăng nhập bằng dấu vân tay của bạn
Hỏi: Thông báo lỗi: "Không thể nhận dạng dấu vân tay. Hãy kiểm tra xem bạn đã
thiết lập dấu vân tay trong Windows Hello chưa" xuất hiện.
Đáp: Thông báo lỗi này có thể xuất hiện khi hệ thống không thể nhận dạng dấu vân
tay của bạn. Chạm lại vào cảm biến dấu vân tay để đăng nhập Windows.
Anmelden mit Fingerabdruck
Sie können Windows Hello von Microsoft Windows verwenden, um sich mit Ihrem 3 Betätigen Sie die Schaltfläche [Hinzufügen]
Fingerabdruck beim Windows-System anzumelden. im Menü [Kennwort], um das Passwort
festzulegen.
Zur Nutzung der Fingerabdruckerkennung sollte Windows auf Ihrem PC installiert sein.
Außerdem sollten Sie das Passwort für Ihr Windows-Konto festlegen.
Registrieren Sie Ihren Fingerabdruck wie folgt.
Legen Sie ein Passwort Registrieren Sie Melden Sie sich mit
1 für
fest
Ihr Windows-Konto 2 Legen Sie die
PIN fest 3 Ihren
druck
Fingerab- 4 Ihrem
an
Fingerabdruck
HINWEISE
yy Die hier gezeigten Abbildungen können je nach Windows-Version von den Schritt 2. Legen Sie die PIN fest
tatsächlichen Abbildungen abweichen.
yy Achten Sie beim Einstellen und Nutzen der Fingerabdruckerkennung darauf, dass
sich keine Fremdkörper am Finger befinden. Die PIN ist ein Passwort zur Identifizierung des Benutzers unabhängig vom Passwort
yy Die für die Fingerabdruckerkennung verwendeten biometrischen Daten werden des Windows-Kontos.
nur auf einem lokalen Speichergerät abgespeichert und nicht an ein externes Falls Sie sich nicht mit Ihrem Fingerabdruck anmelden können, können Sie sich mit
Gerät oder einen Server übertragen. der PIN anmelden.
Schritt 1. Legen Sie ein Passwort für Ihr Windows-Konto fest 1 Betätigen Sie die Schaltfläche [ ],
und wählen Sie das Menü [( )
Wenn Sie ein Windows Live-Konto verwenden oder wenn bereits ein Passwort Einstellungen].
festgelegt ist, müssen Sie diesen Schritt nicht durchlaufen. 2 Wenn der Bildschirm [Einstellungen]
angezeigt wird, wählen Sie [Konten] >
1 Betätigen Sie die Schaltfläche [ ], und
[Anmeldeoptionen].
wählen Sie das Menü [( ) Einstellungen].
3 Betätigen Sie die Schaltfläche
2 Wenn der Bildschirm [Einstellungen]
[Hinzufügen] im Menü [Windows Hello-
angezeigt wird, wählen Sie [Konten] >
PIN (oder PIN)], um das Passwort
[Anmeldeoptionen].
festzulegen.
Schritt 3. Registrieren Sie Ihren Fingerabdruck 6 Registrieren Sie Ihren Fingerabdruck gemäß den Anweisungen auf dem Bildschirm.
(Bei der Registrierung Ihres Fingerabdrucks müssen Sie den Fingerabdrucksensor
"ca. zehnmal" berühren, was einige Zeit dauern kann.)
1 Betätigen Sie die Schaltfläche [ ], und yy Möchten Sie nach der Fingerabdruckerfassung einen weiteren Fingerabdruck
wählen Sie das Menü [( ) Einstellungen]. registrieren, betätigen Sie die Schaltfläche [Weiteren Finger hinzufügen], um diesen
zu registrieren.
2 Wenn der Bildschirm [Einstellungen]
7 Nachdem die Fingerabdruckregistrierung abgeschlossen ist, betätigen Sie die
angezeigt wird, wählen Sie [Konten] > Schaltfläche [Schließen].
[Anmeldeoptionen].
5 Wenn der Bildschirm, der Sie zur Eingabe Ihres Fingerabdrucks auffordert,
Anmeldeoptiomen
Wenn bei der Anmeldung mit Ihrem Fingerabdruck ein Fehler auftritt
F: Die folgende Fehlermeldung erscheint: „Der Fingerabdruck kann nicht erkannt werden.
Prüfen Sie, ob Sie Ihren Fingerabdruck in Windows Hello eingerichtet haben.“
A: Diese Fehlermeldung kann erscheinen, wenn das System Ihren Fingerabdruck nicht
erkennen kann. Berühren Sie den Fingerabdrucksensor erneut, um sich bei Windows
anzumelden.
Iniciar sesión con la huella digital
Puede utilizar el sistema Windows Hello de Microsoft Windows para iniciar sesión en el 3 Pulse el botón [Agregar] en el menú
sistema Windows con la huella digital. [Contraseña] para establecer la contraseña.
Para utilizar la función de reconocimiento de huella digital, debe instalar Windows en
su PC. Asimismo, deberá establecer la contraseña de su cuenta de Windows.
NOTAS
yy Las ilustraciones que aparecen aquí podrían diferir de las ilustraciones reales en Paso 2 Establezca el PIN
función de la versión de Windows.
yy Cuando configure y utilice la función de reconocimiento de huella digital, asegúrese
de que no tenga sustancias extrañas en el dedo. El PIN es una contraseña para identificar al usuario con independencia de la
yy Los datos biométricos usados en el reconocimiento dactilar son almacenados contraseña de la cuenta de Windows.
internamente en el equipo, impidiéndose su uso por dispositivos y/o servidores Si no inicia sesión correctamente con la huella digital, podrá utilizar el PIN para iniciar
externos.
sesión.
Você pode usar o Windows Hello, recurso disponibilizado pela Microsoft que permite 3 Pressione o botão [Adicionar] no menu
que usuários façam login no Windows usando impressão digital. [Palavra-passe] para configurar a senha.
Para usar o recurso de reconhecimento de impressão digital, o sistema operacional
Windows deve estar instalado no seu PC. Além disso, você precisa definir uma senha do
Windows.
Registre sua impressão digital de acordo com os seguintes procedimentos.
Configurar sua senha Configurar Registre sua Faça login usando
1 da conta Windows 2 PIN 3 impressão
digital 4 impressão digital
NOTAS
2º Passo. Configurar PIN
yy As imagens exibidas aqui são apenas para referência e podem diferir dependendo da
versão do Windows.
yy Ao configurar e usa o recurso de reconhecimento de impressão digital, certifique-se de O PIN é uma senha para identificar o usuário separadamente da senha de usuário
que não há substância estranha no dedo. Windows.
yy Os dados biométricos utilizados para reconhecimento de impressões digitais só são
guardados num dispositivo de armazenamento local e não são transmitidos para um
Caso você não consiga fazer login usando impressão digital, você pode fazer login no
dispositivo ou servidor externo. dispositivo usando o PIN.
5 Quando a tela de solicitação de impressão digital for exibida, coloque o dedo no botão
de ligar/leitor de impressão digital no canto superior direito do produto.
yy Pressione [Opções de início de sessão] para selecionar o método de login
(Palavra-passe, PIN e impressão digital).
Quando ocorre um erro durante o login usando sua impressão digital
P: Uma mensagem de erro, "Não foi possível reconhecer a impressão digital.
Certifique-se de que você registrou sua impressão digital no Windows Hello”. exibida.
R: Esta mensagem de erro pode aparecer quando o sistema não reconhecer sua
impressão digital. Toque no sensor de impressão digital novamente para fazer login no
Windows.
Accesso usando l’impronta digitale
È possibile usare Windows Hello, fornito da Microsoft Windows per accedere al sistema 3 Premere il pulsante [Aggiungi] sotto il
Windows usando l’impronta digitale. menu [Password] per impostare la password.
Per usare la funzione di riconoscimento dell’impronta digitale, Windows deve essere
installato nel PC. È anche necessario impostare la password per l’account Windows.
Registrare l’impronta digitale procedendo come segue.
Impostare la Registrare
Impostare il Accedere usando
1 password per
l’account Windows 2 PIN 3 l’impronta
digitale 4 l’impronta digitale
NOTA
yy Le immagini qui riportate potrebbero differire dalle immagini effettive, a seconda della
versione di Windows.
Passaggio 2. Impostare il PIN
yy Quando si imposta e utilizza la funzione di riconoscimento dell’impronta digitale,
assicurarsi che sul dito non siano presenti sostanze estranee. Il PIN è una password per identificare l’utente separatamente dalla password
yy I dati biometrici usati per il riconoscimento dell’impronta digitale vengono salvati solo
in un dispositivo di archiviazione locale e non vengono trasmessi a un dispositivo o dell’account Windows.
server esterno. Se l’accesso con l’impronta digitale non riesce, è possibile accedere usando il PIN.
5 Quando appare la schermata che richiede l’impronta digitale, posizionare il dito sul
ettore di impronta digitale.
Opzioni di accesso
UWAGI
yy Przedstawione ilustracje mogą różnić się od rzeczywistych w zależności od wersji Krok 2. Ustaw kod PIN
systemu Windows.
yy Przed ustawianiem i używaniem funkcji rozpoznawania odcisków palców należy
upewnić się, że na palcu nie ma zabrudzeń. Kod PIN to hasło do identyfikacji użytkownika, inne niż hasło do konta systemu
yy Dane biometryczne wykorzystywane do rozpoznawania odcisków palców Windows.
są zapisywane wyłącznie na lokalnym urządzeniu pamięci masowej i nie są Jeśli użytkownik nie będzie mógł się zalogować za pomocą odcisku palca, będzie
przesyłane do urządzenia zewnętrznego ani serwera. mógł użyć kodu PIN do logowania.
Krok 1. Ustaw hasło do konta systemu Windows 1 Naciśnij przycisk [ ] i wybierz menu
[( ) Ustawienia].
W przypadku korzystania z konta Windows Live lub jeśli hasło jest już ustawione, 2 Gdy wyświetlony zostanie ekran
nie trzeba wykonywać tej procedury. [Ustawienia], wybierz [Konta] >
1 Naciśnij przycisk [ ] i wybierz menu [Opcje logowania].
[( ) Ustawienia]. 3 Naciśnij przycisk [Dodaj] w menu [Kod
2 Gdy wyświetlony zostanie ekran PIN funkcji Windows Hello(lub Numer
[Ustawienia], wybierz [Konta] > PIN)], aby ustawić hasło.
[Opcje logowania].
Krok 3. Zarejestruj odcisk palca 6 Zarejestruj swój odcisk palca zgodnie z instrukcjami wyświetlanymi na ekranie.
(Po zarejestrowaniu odcisku palca należy dotknąć czujnika odcisku palca „ok.
10 razy” i może to chwilę potrwać).
1 Naciśnij przycisk [ ] i wybierz yy Aby zarejestrować kolejny odcisk palca po zakończeniu rejestracji odcisku
menu [( ) Ustawienia]. palca, naciśnij przycisk [Dodaj kolejny palec], aby go zarejestrować.
2 Gdy wyświetlony zostanie ekran [Ustawienia], 7 Po zakończeniu rejestracji odcisku palca naciśnij przycisk [Zamknij].
wybierz [Konta] > [Opcje logowania].
Opcje logowania