Professional Documents
Culture Documents
Cleaning Systems Guide
Cleaning Systems Guide
Cleaning Systems Guide
SYSTEMS
This brochure provides a short introduction of DCT´s most popular
innovative cleaning technologies.
For more information about our cleaning systems and cleaning chemistries please contact
your local representative or DCT Project Manager.
www.dct.cleaning
CLEANING TECHNOLOGIES
100%
STAINLESS
STEEL
DESIGN
AISI 304/316
Wide Scope of applications | Single and Multi-Chamber versions | Vertical and horizontal configurations
Fully and Semi-Automatic versions
MADE IN THE
CZECH REPUBLIC
• 1st cleaning
PRIMARILY DESIGNED FOR: • 2nd pre-rinse
PCBA • 3rd final rinse and drying
STENCILS
(high capacity) 1st and 3rd process chambers
can be used simultaneously
CHAMBER
process.
One step rinsing option is suitable Two step rinsing technology secures
for maintenance cleaning applications. the highest quality of cleaning.
Two 4-arm rotations guarantee the Three 4-arm rotations allow the use
force needed for removing of hard of 2 baskets for the maximum capacity.
to clean fluxes.
CHAMBER PRIMARILY DESIGNED FOR:
PRIMARILY DESIGNED FOR: PCBA
SOLDERING FRAMES
CHAMBER
Sonix® CHAMBER
CLEANING
SYSTEMS PROCESS
CONTROL DCT Czech s.r.o.
Havlíčkova 18
680 01 Boskovice
Czech Republic
info@dct.cleaning
www.dct.cleaning