Professional Documents
Culture Documents
F 008am - Plta Pscs Pc1250 8
F 008am - Plta Pscs Pc1250 8
Lembar servis
Service sheet
No PASANG 'OUT OF SERVICE TAG' , 'DANGER TAG' & 'GANJAL BAN'(INSTALL OUT OF SERVICE TAG , DANGER TAGS & WHEEL CHOCKS)
SERVICE TYPE
Kompartemen Oli/Oil Compartment Tindakan/action
250 500 1000 2000
1 Engine Ganti (Replace)
2 Swing Machinery Case Front/Rear Ganti (Replace)
3 PTO Ganti (Replace)
4 Final Drive RH/LH Ganti (Replace)
5 Hydraulic Ganti tiap 4000 Jam - Sesuai Kondisi (Replace in 4000 Hrs)
SERVICE TYPE
Sample Oli/Oil Sample Tindakan/action
250 500 1000 2000
6 Engine Ambil sampel & periksa level (Take Sample & Check Level)
7 Swing Drive Front / Rear Ambil sampel & periksa level (Take Sample & Check Level)
8 PTO Ambil sampel & periksa level (Take Sample & Check Level)
9 Final Drive RH / LH Ambil sampel & periksa level (Take Sample & Check Level)
10 Hydraulic Ambil sampel & periksa level (Take Sample & Check Level)
SERVICE TYPE
Sample Grease/Grease Sample Tindakan/action
250 500 1000 2000
11 Grease Swing Bearing** Ambil sampel (Take Sample)
*) Merujuk ke SOP Program Pelaksanaan SOS **)Gunakan Penamaan tersebut saat Labeling sampel
SERVICE TYPE
Filter Tindakan/action
250 500 1000 2000
12 Engine Ganti (Replace)
13 Fuel Pre-Filter Ganti (Replace)
14 Fuel Main Filter Ganti (Replace)
15 Pilot Filter Element Ganti (Replace)
16 PTO Filter Strainer Bersihkan (Clean up)
17 Drain Filter Cartridge Ganti (Replace)
18 Hydraulic Filter Element Ganti (Replace)
19 Hydraulic Return Filter Ganti (Replace)
20 Corrosion Resistor Cartridge Ganti (Replace)
21 Fuel Strainer Bersihkan (Clean up)
22 Hydraulic Tank Strainer Bersihkan pada PS 2000 (Clean up in PS 2000)
SERVICE TYPE
Saringan Pernapasan (Breather) Tindakan/action
250 500 1000 2000
23 Engine Bersihkan (Clean up)
24 Fuel Tank Breather Element Ganti (Replace)
25 Hydraulic Tank Breather Filter Element Ganti (Replace)
SERVICE TYPE
Tangki (Tank) Tindakan/action
250 500 1000 2000
26 Udara & Bahan Bakar (Air & Fuel Tank) Buang endapan air (drain water)
SERVICE TYPE
Lain - lain (Others) Tindakan/action
250 500 1000 2000
27 Saringan Udara dalam dan luar (Air Filter Outer & Inner) Bersihkan dan Ganti jika perlu (Clean up & Replace if required)
28 AC Condenser Fins Bersihkan (Clean up)
29 Radiator, Cooler, After Cooler & Fuel Cooler Fins Bersihkan (Clean up)
30 Air Filter (AC) Bersihkan dan Ganti jika perlu (Clean up & Replace if required)
31 Water Pump Periksa kebocoran tiap 4000 jam (Check leakage in 4000Hrs)
32 Vibration Damper Periksa kebocoran tiap 4000 jam (Check leakage in 4000Hrs)
33 Air Radiator (Coolant) Uji & Penuhkan jika perlu (test & Top up if nesscesary)
34 % GLYCOL/FREEZE POINT ( 0F )
35 MOLYBDATE ( MoO4 ) Hasil (Result)
36 NITRITE ( NO2 )
Plug Magnet & Catat (Magnetic Plug for Particles & Record ) *
37 Engine Final Drive RH
38 PTO Final Drive LH
*) Merujuk ke STD Magnetic Plug Rating
Potong/ Periksa Saringan2 bermasalah & Catat (Cut Filter/ Inspect if Indicated failure & Record ) *
39 Engine
40 Hydraulic
*) Merujuk ke STD Filter Cut Rating
Lembar servis
Service sheet
No PASANG 'OUT OF SERVICE TAG' , 'DANGER TAG' & 'GANJAL BAN'(INSTALL OUT OF SERVICE TAG , DANGER TAGS & WHEEL CHOCKS)
SERVICE TYPE
Kompartemen Oli/Oil Compartment Tindakan/action
Pengambilan Data Modul Elektronik
43 Download VHMS
*) Merujuk ke STD On Board Electronic Download
SERVICE TYPE
PELUMASAN (GREASE)
250 500 1000 2000
44 Penuhkan Tangki Grease (Central Lubricating - Grease Container, Refilling)
45 Boom Cylinder Foot Pin
46 Boom Foot Pin
47 Boom Cylinder Rod End Pin
48 Arm Cylinder Foot Pin
49 Boom-Arm Coupling Pin
50 Bucket Cylinder Foot Pin
51 Arm Cylinder Rod Pin
52 Arm-Link Coupling Pin
53 Arm-Bucket Coupling Pin
54 Link Coupling Pin
55 Bucket Cylinder Rod End Pin
56 Bucket-Link Coupling Pin
57 Swing Circle
SERVICE TYPE
PENGECEKAN AKHIR ( FINAL INSPECTION )
250 500 1000 2000
58 Pastikan semua level oli pelumas (Ensure all oil level)
59 Pastikan level air coolant (Ensure coolant water level)
60 Pastikan semua refill plug kencang (Ensure all refill plugs are tight)
61 Pastikan semua drain plug kencang (Ensure all drain plugs are tight)
62 Pastikan semua filter terpasang dan kencang (Ensure all filters are fit & tight)
ENGINE Ok/Not Ok
SAFETY CHECK AND GENERAL Tindakan/action Status Ok/Not Ok
76 Semua petunjuk safety tersedia & jelas (Safety sign are fitted & clear) Periksa (Check)
77 Kondisi dan isi pemadam api (Condition and insert of fire extinguisher Periksa (Check)
78 Tangga untuk naik operator (Ladder for damaged) Periksa (Check)
79 Semua tutup & pengaman ada dan lengkap (All guards and covers are in place and secure) Periksa (Check)
STATUS
ITEM DEFECT
Ok* Backlog**
1) Fix a dial gauge to the outer race (or track 3) Set the dial gauge D to the zero point.
frame) of the swing circle, then put the tip of the
probe in contact with the track frame (or outer 4) Set the arm more or less at right angles to the
race). ground surface, then lower the boom until the
Set the dial gauge at the front or rear. front of the machine comes off the ground.
•When this is done, the upper structure will tilt
back, so the front will rise and the rear will go
down.
Inspected by/Signature:
Date:
Mechanic Supv/Signature:
Date: