Professional Documents
Culture Documents
Kayu Nganjuk AUSTIN MINI 31t8i4
Kayu Nganjuk AUSTIN MINI 31t8i4
Wide : 8.5 cm
High : 7.5 cm
Long : 20 cm
PICTURE
Main Image
AUSTIN MINI
Ready to print PDF
It’s all quick and easy to make
A4
Build it using common tools and Sheet
easy materials to find.
WARNING
COPYRIGHT INFORMATION
Plans and pa erns in this Package For personal use only, the content owner gives non-exclusive buyer permission
to view, download and copy content. buyers must comply with the content owner rules. The content owner has
exclusive rights to the content that is owned in the present and in the future.
1. Use of content for commercial purposes is prohibited, content cannot be resold, re-licensed or sub-licensed,
leased and mass produced.
2. Distribu ng or sharing content for any reason is prohibited. Sharing of content is only permi ed via the official
website link of the content owner h ps://kayunganjuk.com
3. The reuse of content in the form of photo or video files is permi ed by giving credit to the content owner at
h ps://kayunganjuk.com
Notes to Readers:
Due to individual condi ons, tools and skills, we are not responsible for any damage, injury suffered, or loss that
occurs as a result of following the informa on published in this set of plans. Before star ng any instruc ons
carefully review the project. If you have any doubts or ques ons, please con nue to consult with local experts or
authori es.
CONTENT
Cover ....................................................................... 1
Front View
Rear View
Top View
Bo om View
Rigth View
Le View
IMPORTANT NOTE
1. Before cu ng the material, cover the surface with masking tape or vinyl s ckers, this is to make it easier to s ck
or remove the cut pa ern on the material without leaving glue marks on the material.
2. Make sure the thickness of the material is in accordance with the instruc ons on the cu ng pa ern that we set,
this will greatly affect the construc on and other parts during assembly.
3. Assemble each part using wood glue or PVA glue on the wide part, use a clamp for maximum results, use super
glue or all-purpose liquid glue in small parts.
ALTERNATE DOWELS
In general, we use 5mm diameter food chops cks as a dowel on the wheel and a 3mm diameter toothpick as the
steering wheel.
19
3
18
1
17
2
Step 1 Step 2
Combine parts 1, 2 and 3 use wood glue / PVA glue then clamp Combine parts 4, 5 and 6 into one sec on, use liquid glue /
and wait for it to dry. super glue
4a
4b
Step 3 Step 4
Combine two parts into one sec on (see picture) use super glue Combine parts 4a and 4b into one sec on, we use ribbon cloth
/ liquid glue as a hinge and use super glue or staples to connect
5a
5b
Step 5 Step 6
Combine parts 5a and 5b into one sec on, we use ribbon cloth Combine three parts into one sec on, use wood glue / PVA glue
as a hinge and use super glue or staples to connect then clamp and wait for it to dry.
Step 7 Step 8
Combine parts 6, 7 and 8 into one sec on, use wood glue / pva Combine the two parts into one sec on, use wood glue / pva
glue then clamp and wait for it to dry. glue then clamp and wait for it to dry.
10
10
9
11
Step 9 Step 10
Combine parts 9 and 10, use super glue / liquid glue (see Combine part 11, use super glue / liquid glue (see picture)
picture)
4c
5c
Step 11 Step 12
Insert parts 4c and 5c (see picture) use super glue / liquid glue Combine parts 12 and 13 (see picture) use super glue / liquid
glue
Step 13 Step 14
Combine part 15 and 16 into one sec on, use wood glue / PVA Insert parts 20 on the inner side into one sec on, use super glue
glue then clamp and wait for it to dry. / liquid glue (see picture)
Step 15 Step 16
Insert two parts into one sec on without glue Combine two parts into one sec on, use super glue (see
picture)
IMPORTANT NOTE
1. Print the cut pa erns that we have set, make sure the print size of the printer is accurate, print as original
documents and do not use a scale, measure the print on each cut pa ern with a ruler, if the size does not match
then adjust the printer se ngs.
2. Use paper glue and paste print cut pa erns on the material according to the thickness we have set, cut follow
the black outline and remove the white area.
3
hole diameter hole diameter
6mm 6mm
4b 4a
4c
5a 5b
5c
material thick 10mm
front side material thick 5mm rear side material thick 5mm
10 10
13
19
12
11
15 15 15 15
16 16 16 16
20
20 17 19
We are basically ordinary human beings, have the wrong nature and forget.
If you find any errors in this plan set, Please forgive and remind us.
Your cri cisms and sugges ons mean a lot to us, so that we can develop and get be er in the future.
Posi ve benefits to the world community.
Contact us
Email : kayunganjuk@gmail.com
Website : kayunganjuk.com
Pinterest : id.pinterest.com/kayunganjuk
Instagram : instagram.com/kayunganjuk
Facebook : facebook.com/fbkayunganjuk
Youtube : youtube.com/c/kayunganjuk