Professional Documents
Culture Documents
Prequalification of Pioneer Laboratory
Prequalification of Pioneer Laboratory
Table of contents
1- Introduction & Address
* Cover Page
* Testing Services
* Address
* Address & Contacts
* Location Map
2- Commercial Certificate
* Chamber of Commerce Certificate
* Commercial Permit
* Commercial Registration
5- Projects Approvals
* List of Approved Projects
* Progect Approval Certificates
6- QAQC Manual
* Revision
* Laboratory Manual
* ANNEX 1 ISO Lab
8- Calibration Certificate
* Dial Gauge
* Balance
* Thermometer w/ Prove
* Water Bath
* Compressive Machine
* Standard Weigth
* Oven Digital
* Preassure Gauge
* CBR Testing Machine
* Cement Autoclave
* Humidity Chamber
* Hygrometers
* Incubator
* Load Cell
9- NG Approvals
* Company Approvals for using and calibration
* Company Store Transport Approvals
* Machine Calibration Certificates
* Machine Leak Test Certificates
* User Certificates
(1)
PIONEER LABORATORY COMPANY
Pioneer Laboratory Company (PLC) is an independent and private material testing laboratory at
Industrial Area Street No. 15, Gate – 28 Doha, Qatar. It was established in Qatar since June 2006 to
provide comprehensive services for the physical, mechanical, chemical and environmental testing for
various construction materials. PLC is registered with Ministry of Commerce.
The laboratory is equipped to carry out tests to National and International Standards in the area of
Physical, Mechanical and Chemical Testing (Soil for construction purposes) Aggregates, Concrete,
Masonry Blocks, Paving units, Tiles, Kerbs, Flags, Physical Testing of Asphaltic Materials, Road
Pavement Test, And chemical testing of water. The Laboratory is leaded by experience and qualified
engineers and operated by well experienced technicians.
PIONEER
LABORATORY
Commercial
Certificate
(2)
a.Company Registration
b.Commercial Approval
c.Chamber of commerce
0123ÿ56789
O!PÿÿQ!R!S2ÿTUV2ÿW3XPY
Z[[\ÿ5*!V4ÿ]#!8 ÿO3PÿÿQ!R!S2ÿTUV2ÿW3XPY
^__`ab^
cV#3dÿSPÿ O!Pÿÿ
5#!Pÿ5/ 3SR,S2ÿQ3VPXY O!Pÿ'e
[[ZZ ÿÿÿÿf!;PRÿ]#!8 Z[[Zg ÿf!0Rÿ]#!8
Z p!/ÿq +k7$lYÿ5S,mYÿQnÿ5-3o hR,R!iÿj0
34 +t0"/ÿ5S"u ÿÿs0R ÿ5!r
v73wÿk$*
xyz{|}ÿy
gg\
g\ p!8ÿ!
Z $#3Vÿ7$"6
y}
5!l 5V" 5S" ÿ Q!Vÿ 'e
s0R ÿ
!#,' Z\gg ÿ1!VUoÿÿ3S/'ÿ!r
s0R ÿ\ 34 ZZg
\g ÿ32!uÿÿ$/rÿ',#
yÿ}ÿ} }
¡5Sr)¢ÿ5w 5S" ÿ Q!Vÿ 'e
3#$Yÿ£ÿ5i&4Y7ÿ5&Y!-ÿQ!Sr)6ÿÿ !#,' Z\gg ÿ1!VUoÿÿ3S/'ÿ!r
ÿÿÿ
ÿÿÿ
!"#$ÿ%&'ÿ()*ÿ+,-./ÿ+!0"/ÿ1!2ÿ34ÿ5*!"6ÿ7ÿ+!8ÿ593:ÿ$;08
<=>=?ÿ@A=BCD?ÿED?>FGFDHÿ>A=>ÿ>ADÿ=CIJDÿBDK>FIKDLÿDH>=CMFHABDK>ÿA=HÿCDDKÿ?DNFH>D?DL
0123ÿ56789
{rÿÿ]|^1ÿ}Yq1ÿ~2wrV
abcdefghÿajklmh
n/!ÿ&o 2 n/!ÿ&o 2
]2qrw.ÿ]#YV6ÿxyÿz8ÿ*r QUQTUU p!qÿ[+Vÿqrs6ÿtu8ÿv.) RQU
ÿÿÿ
ÿÿÿ
!"#ÿ$%&ÿ'()ÿ*+,-.ÿ*/!.ÿ01ÿ23ÿ4)!5ÿ6ÿ*7ÿ4829ÿ#:/7
;<=<>ÿ?@<ABC>ÿDC>=EFECGÿ=@<=ÿ=@Cÿ<BHICÿACJ=EHJCKÿCG=<BLEG@ACJ=ÿ@<GÿBCCJÿ>CMEG=C>CK
01123ÿ56738ÿ
96
3ÿ8ÿ
ÿ
9937;<6@ÿ3
<17767<>ÿ5676
ABBCDEA
01123ÿ56738ÿFGG
9937;<6@ÿ3
HÿH8
I6Jÿ3
HÿH8
I76?3ÿ6938 9<>337ÿK6:7677<31 I76?3ÿILM38
7367<>ÿ56738 G
GN OJM<7Lÿ56738 GG
K3
6@ÿP798 QHKHK 6M<76@8
9937;<6@ÿ3
HÿR767218 S;7<=3ÿÿ P<79ÿ67<>6@<7L8 6SIS
HÿÿT76>;8318
UVWXYZXÿ\W]V^_YXV̀W
a6<@ÿTJ8 b
c >76;71ÿ29:3718 debNNFbNF
O96<@8
ÿfY^XWg^h
iY_g jVZk_gWXÿiV UlÿiV iYXV̀WYm̀Xn fg^ZgWXYog pXYXkh
qrsRsPÿStaS5ÿÿuÿ eNbFN 6SIS F
v S;7<=3
trsRRSaÿRSa0ÿÿRtSTTSÿ eFeNeN Rq0S bv S;7<=3
wYWYog^hÿxykXzV^`{g|ÿpòWYXV^g̀h}
iY_g jVZk_gWXÿiV UlÿiV iYXV̀WYm̀Xn jghòWYXV̀W
xykXzV^X̀n}
trsRRSaÿRSa0ÿÿRtSTTSÿ eFeNeN Rq0S a6>6
37ÿ~ÿP2@@ÿ6>?ÿS:1@273ÿ
S2787<7L
qrsRsPÿStaS5ÿÿuÿ eNbFN 6SIS a6>6
37ÿ~ÿS?9<><17767<=3ÿ
S2787<7Lÿ9611M771
qrsRsPÿStaS5ÿÿuÿ eNbFN 6SIS a6>6
37ÿ~ÿS?9<><17767<=3ÿ
S2787<7LÿK6:7
96
3ÿ
ÿÿ
ÿÿ8ÿ
ÿÿ!ÿ"#$%&'!ÿ"('!ÿ)*+ÿ,-.ÿ/01ÿ"#2ÿ/3,4ÿ5(2
66767ÿ869:37ÿ;377<<31ÿ7867ÿ783ÿ6:=3ÿ93>7<>3?ÿ3176:@<1893>7ÿ861ÿ:33>ÿ73
<17373?
01123ÿ56738ÿ
96
3ÿ8ÿ
ÿ
9937;<6@ÿ3
<17767<>ÿ5676
ABCDEFCCÿHIJDKDJDFC
HIJDKDJLÿMNOF HIJDKDJLÿPQRF HIJDKDJLÿMNOF HIJDKDJLÿPQRF
S76?<>
ÿ<>ÿ27><7273ÿ6>?ÿ@6:7677Tÿ WXWW Y7Z1ÿÿ3[69<>3ÿ6>?ÿ3[V37<93>7ÿ \
W
3U2<V93>7 ÿ:2<@?<>
ÿ96737<6@1
96
3ÿÿÿ
ÿÿ8ÿ
ÿÿ!ÿ"#$%&'!ÿ"('!ÿ)*+ÿ,-.ÿ/01ÿ"#2ÿ/3,4ÿ5(2
66767ÿ869:37ÿ;377<<31ÿ7867ÿ783ÿ6:=3ÿ93>7<>3?ÿ3176:@<1893>7ÿ861ÿ:33>ÿ73
<17373?
BUSINESS FIRM DATA
(3)
Ashghal lab list
Central lab approval
Nature of Business : Laboratory Testing and Materials
Consultancy Services
1) Asphalt
2) Soil
3) Aggregates
4) Concrete
5) Chemical
Table of Contents
No. Section Page No.
1 Soil Tests 3
2 Aggregate Tests 7
3 Concrete Tests 11
4 Masonry Blocks and Paving Units Tests 15
5 Cementitious Materials Tests 17
6 Road and Pavement Tests 20
Approved Labs for Asphalt Mix Preparation and
7 27
Verification
8 Steel Tests 28
9 Geotechnical Tests 29
10 Environmental Tests 32
11 Non Destructive Tests 40
12 Geotextile & Waterproofing Tests 42
13 Leakage Testing of Buildings 45
14 Paints &varnishes Tests 47
15 Calibration labs 50
1
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&Safety@ashghal.gov.qa
ﻫﻳﺋﺔ ﺍﻷﺷﻐﺎﻝ ﺍﻟﻌﺎﻣﺔ
ﺇﺩﺍﺭﺓ ﺍﻟﺟﻭﺩﺓ ﻭ ﺍﻟﺳﻼﻣﺔ
ﻭﺣﺩﺓ ﻣﺭﺍﻗﺑﺔ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ- ﻗﺳﻡ ﺍﻟﻣﺧﺗﺑﺭﺍﺕ
1. Soil Tests
Laboratory
Geotechnical
ELEMENT
No. Test Standard
Tech Lab
BATLABS
Gulf Lab
Group
Teyseer
Pioneer
Ashghal
QGEC
Fugro
ACES
ACTS
QEL
DTL
CTL
JEL
QIL
ITL
Reducing Samples to Testing
1.1
Size
ASTM C702 √ √ √ √ √ √ - √ √ √ √ - - √ √ √ - √
Determination of Moisture
1.2
Content
ASTM D2216 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ - √
3
Tel: 44950200 – Fax: 44951200 – e. mail: Quality&Safety@ashghal.gov.qa QSD/LL/S/V6/2019
ASHGHAL APPROVED TEST LIST
Test Name Standard
SOIL TEST
Reducing Samples to Testing Size ASTM C702
Determination of Moisture Content ASTM D2216
Particle Size Distribution ASTM D6913
Materials Finer than No. 200 (0.075mm) Sieve ASTM D1140
Liquid Limit, Plastic Limit and Plasticity Index of Soil ASTM D4318
Lab Compaction Test using Modified Effort ASTM D1557
Correction of Density and Water Content for Soils ASTM D4718
Field Density (Sand Cone) ASTM D1556
Field Density (Nuclear) ASTM D6938
Determination of California Bearing Ratio (CBR) ASTM D1883
In Place California Bearing Ratio (CBR) ASTM D4429
Sand Equivalent Value ASTM D2419
Determination of Moisture Content (Oven Drying) BS 1377 Part 2: Sec. 3.2
Determination of Liquid Limit (Cone Penetrometer) BS 1377 Part 2: Sec. 4.3
Determination of Liquid Limit (Casagrande Method) BS 1377 Part 2: Sec. 4.5
Determination of Plastic Limit and Plasticity Index BS 1377 Part 2: Sec. 5
Particle Size Distribution (Wet Sieving Method) BS 1377 Part 2: Sec. 9.2
Particle Size Distribution (Dry Sieving Method) BS 1377 Part 2: Sec. 9.3
Dry Density/Moisture Content Relationship BS 1377 Part 4 :Sec.3.5/3.6
Determination of California Bearing Ratio (CBR) BS 1377 Part4: Sec. 7
Sand Replacement Method - Small Pouring Cylinder BS 1377 Part 9: Sec. 2.1
(Sand Replacement Method – Large Pouring Cylinder) BS 1377 Part 9: Sec. 2.2
In-Situ Density Test (Nuclear Gauge Method) BS 1377 Part 9: Sec. 2.5
Determination of Organic Matter Content BS 1377 Part 3: Sec. 3
Determination of Water Soluble Chloride Content BS 1377 Part 3: Sec. 7.2
Determination of Acid Soluble Chloride Content BS 1377 Part 3: Sec. 7.3/5.5
Determination of Water Soluble Sulphate Content BS 1377 Part 3: Sec. 5.3/5.5
Determination of Acid Soluble Sulphate Content BS 1377 Part 3: Sec. 5.2
Sand Equivalent Value BS EN 933 Part 8
AGGREGATE TEST
Sampling of Aggregates ASTM D75
Reducing Samples to Testing Size ASTM C702
Particle Size Distribution ASTM C136
Material Finer than 0.075 mm ASTM C117
Specific Gravity and Water Absorption of Fine Aggregate ASTM C128
Specific Gravity and Water Absorption of Coarse Aggregate ASTM C127
Clay Lumps and Friable Particles ASTM C142
Lightweight Particles ASTM C123
Organic Impurities for Fine Aggregates ASTM C40
Flat and Elongated Particles ASTM D4791
Los Angeles Abrasion ASTM C131
Los Angeles Abrasion ASTM C535
Magnesium Sulphate Soundness ASTM C88
Percentage of Fractured Particles ASTM D5821
Sieve Analysis of Mineral Filler ASTM D546
Sampling of Aggregates (From Heaps) BS 812 Part 102
Determination of Moisture Content (Oven Drying) BS 812 Part 109: Sec.6
1 of 4
ASHGHAL APPROVED TEST LIST
Determination of Particle Density and Water Absorption BS EN 1097 Part 6
Density and Water Absorption (All larger than 10mm agg.) BS 812 Part 2–5.3
Density and Water Absorption (5-40mm agg. BS 812 Part 2–5.4
Density and Water Absorption (10mm agg. and smaller) BS 812 Part 2–5.5
Particle Size Distribution BS EN 933 Part 1
Particle Size Distribution (Wet) BS 812 Part 103.1-7.2
Particle Size Distribution (Dry) BS 812 Part 103.1-7.3
Material Finer than 0.075 mm BS EN 933 Part 1
Material Finer than 0.063 mm BS EN 933 Part 1
Determination of Shell Content BS EN 933 Part 7
Flakiness Index BS 812 Part 105.1
Elongation Index BS 812 Part 105.2
Determination of Aggregate Crushing Value BS 812 Part 110
Determination of Ten Percent Value BS 812 Part 111
Determination of Aggregate Impact Value BS 812 Part 112
Determination of Acid Soluble Chloride Content BS EN 1744 Part 5
Determination of Water Soluble Chloride Content BS 812 Part 117
Determination of Sulphate Content BS 812 Part 118
Determination of Acid Soluble Sulphate Content BS EN 1744 Part 1: Sec 12
Concrete Tests
Sampling of Fresh Concrete ASTM C172
Test for Temperature of Fresh Concrete ASTM C1064
Slump Test ASTM C143
Compressive Strength of Concrete Cylindrical Specimens ASTM C39
Capping of Cylindrical Concrete Specimen ASTM C617
Obtaining and Testing of Drilled Cores and Sawed Beams ASTM C42
Resistance to Chloride Ion Penetration ASTM C1202
Air Content Test for Fresh Concrete by Pressure Method ASTM C231
Sampling of Fresh Concrete BS EN 12350 Part 1
Making and Curing of Specimen for Strength Test BS EN 12390 Part 2
Slump Test BS EN 12350 Part 2
Flow Table Test BS EN 12350 Part 5
Shape and Dimensions of Specimen BS EN 12390 Part 1
Compressive Strength of Concrete Specimens BS EN 12390 Part 3
Density of Hardened Concrete BS EN 12390 Part 7
Water Absorption Test BS 1881 Part 122
Initial Surface Absorption (ISAT) BS 1881 Part 208
Chloride Penetration Test NT Build 492
Acid Soluble Chloride in Concrete BS 1881 Part 124 Sec. 10.2
Acid Soluble Sulphate in Concrete BS 1881 Part 124 Sec. 10.3
Masonry Blocks and Paving Units Tests
Compressive Strength of Clay Masonry Blocks BS EN 771 Part 1
Compressive Strength of Concrete Masonry Blocks BS 6073 Part 1
Compressive Strength of Concrete Masonry Blocks BS EN 772 Part 1
Water Absorption for Masonry Blocks BS EN 771 Part 3
Measurement of Dimensions of Kerbs BS EN 1340 Annex C
Water Absorption for Kerbs BS EN 1340 Annex E
Transverse Strength of Kerbs BS EN 1340 Annex F
Water Absorption for Paving Blocks BS EN 1338 Annex E
Tensile Strength of Paving Blocks BS EN 1338 Annex F
2 of 4
ASHGHAL APPROVED TEST LIST
Measurement of Dimensions of Paving Blocks BS 6717 Annex B
Tensile Strength of Paving Blocks BS 6717 Annex E
Water Absorption for Interlocks ASTM C140
Cementitious Materials Tests
Taking and Preparing Samples of Cement BS EN 196 Part 7
Loss on Ignition BS EN 196 Part 2–Cl. 7
Determination of Soundness of Cement BS EN 196 Part 3
Setting Time by Vicat Needle ASTM C191
Normal Consistency of Cement ASTM C187
Chloride Content BS EN 196 Part 21–Cl. 4
Comp. strength for Ground Granulated Blast Furnace Slag ASTM C989
Road and Pavement Tests
Sampling of Binders ASTM D140
Distillation of Cutback Asphalt ASTM D402
Application Rate of Bituminous Distributors ASTM D2995
Determination of Density of Bitumen ASTM D70
Penetration of Bituminous Materials ASTM D5
Determination of Softening Point (Ring and Ball Method) ASTM D36
Flash Point, Cleveland Open Cup ASTM D92
Solubility in Trichloroethylene ASTM D2042
Viscosity Determination using Rotational Viscometer (RV) ASTM D4402
Distillation ASTM D95
Sampling of Bituminous Mixtures ASTM D979
Sampling Compacted Bituminous Mixtures for Laboratory Test ASTM D5361
Preparation of Specimens Using Marshall Apparatus ASTM D6926
Bulk Specific Gravity and Density ASTM D2726
Bulk Specific Gravity and Density Using Coated Samples ASTM D1188
Maximum Specific Gravity and Density ASTM D2041
Thickness of Asphalt Specimen ASTM D3549
Marshall Stability and Flow of Bituminous Mixtures ASTM D6927
Resistance to Plastic Flow ASTM D5581
Quantitative Extraction of Bitumen ASTM D2172
Mechanical Size Analysis of Extracted Aggregate ASTM D5444
Density of Bituminous Concrete in Place by Nuclear Methods ASTM D2950
Indirect Tensile (IDT) Strength of Bituminous Mixtures ASTM D6931
Surface Frictional Properties by the British Pendulum Test ASTM E303
Sampling of Asphalt BS EN 12697 Part 27
Preparation of Samples for Testing BS EN 12697 Part 28
Specimen Preparation by Impact Compactor BS EN 12697 Part 30
Soluble Binder Content BS EN 12697 Part 1
Particle Size Distribution BS EN 12697 Part 2
Determination of Bulk Density BS EN 12697 Part 6
Temperature Measurement BS EN 12697 Part 13
Determination of Dimensions of Specimen BS EN 12697 Part 29
Marshal Test BS EN 12697 Part 34
Determination of Thickness of Specimen BS EN 12697 Part 36
Determination of Needle Penetration BS EN 1426
Pavement Markings Tests
Softening Point of Thermoplastic Material BS 2000-58
3 of 4
ASHGHAL APPROVED TEST LIST
Glass Bead Content of Thermoplastic Material BS 3262 Part 1–Ap. D
Determination of Density of Thermoplastic Material BS 3262 Part 3–Ap. C
Flash Point (Open) of Thermoplastic Material BS 2000-35
Flow Resistance of Thermoplastic Material BS 3262 Part 1–Ap. H
Combined Gradation of Material BS 3262 Part 1–Ap. D
Particle Size Distribution of Glass Beads BS 6088 Appendix B
Measurement of Skid Resistance BS 3262 Part 1–Ap. J
Dry Film Thickness BS 3262 Part 3–Ap. B
Wet Film Thickness by Notch Gauge BS EN 13197 Annex C
Geotechnical Tests
Preparing Rock Core Specimens to Dimensional Tolerances ASTM D4543
Compressive Strength of Rock Core Specimen ASTM D7012
Plate Load Test BS 1377 Part 9-Sec. 4.1
*Electrical Resistivity Test ASTM G57
Environmental Tests
*Chloride Content BS EN 196 Part 21-Cl. 4
*Loss on Ignition BS EN 196 Part 2-Cl. 7
*Turbidity APHA/AWWA 2130 B 22nd Edition 2012
*Total Suspended Solids APHA/AWWA 2540-B 22nd Edition 2012
*Total Dissolved Solids APHA/AWWA 2540-D 22nd Edition 2012
*Oil & grease APHA/AWWA 5520 D 22nd Edition 2012
*Sulfate APHA/A WWA 4500 S04, 22nd Edition 2012
*Total Coliforms APHA/AWWA-9223B 22nd Edition2012 IDEXX method
*Fecal Coliform APHA/AWWA-9223B 22nd Edition2012 IDEXX method
*E-Coli APHA/AWWA-9223B 22nd Edition2012 IDEXX method
*Electrical Conductivity APHA/AWWA 2510-B 22nd Edition 2012
*pH value APHA/AWWA 4500-H+B 22nd Edition 2012
.* Water soluble chloride content BS 1377-3
*Det. of so il total dissolved solids BS 1377 Part 3 Clause 11
*Determination of the soil pH value BS 1377 Part 3 Clause 12
*= under approval
4 of 4
ISO 17025 Certificate
(4)
a.ISO 17025 Certificate
Management
A Organization:
B Operations:
PIONEER LABORATORY
Doha, Qatar
for technical competence in the field of
_______________________
President and CEO
For the Accreditation Council
Certificate Number 4913.01
Valid to July 31, 2020
For the tests to which this accreditation applies, please refer to the laboratory’s Construction Materials Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to
this laboratory for:
Aggregates:
ASTM C40/C40M Organic Impurities in Fine Aggregates for Concrete
ASTM C88 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium
Sulfate
ASTM C117 Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by
Washing
ASTM C123 Lightweight Particles in Aggregate
ASTM C127 Density, Relative Density (Specific Gravity), and Absorption of
Coarse Aggregate
ASTM C128 Density, Relative Density (Specific Gravity), and Absorption of Fine
Aggregate
ASTM C131 Resistance to Degradation of Small-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine
ASTM C136/C136M Sieve Analysis of Fine and Coarse Aggregates
ASTM C142 Clay Lumps and Friable Particles in Aggregates
ASTM C535 Resistance to Degradation of Large-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine
ASTM D75/D75M1 Sampling Aggregates
ASTM D2419 Sand Equivalent Value of Soils and Fine Aggregate
ASTM D4791 Flat Particles, Elongated Particles, or Flat and Elongated Particles in
Coarse Aggregate
ASTM D5821 Determining the Percentage of Fractured Particles in Coarse Aggregate
BS 812 Part 2 Section 5.3 Testing aggregates
Part 2: Methods for determination of density
Clause 5.3: Method for aggregates all larger than
10mm
BS 812 Part 2 Testing aggregate
Sections 5.4 and 5.5 Part 2: Methods for determination of density
• Particle density and water absorption of aggregate between 40mm
and 5mm
• Particle density and water absorption 10mm aggregate & smaller
Asphalt:
ASTM D5/D5M Penetration of Bituminous Materials
ASTM D36 Softening Point of Bitumen (Ring & Ball Apparatus)
ASTM D70 Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D95 Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D402/D402M Distillation of Cutback Asphalt
ASTM D546 Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
ASTM C7021 Reducing Samples of Aggregate to Testing Size
ASTM D979/D979M Sampling Bituminous Paving Mixtures
ASTM D1188 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures
Using Coated Samples
ASTM D2041 (Methods 10.1.1 Theoretical Maximum Specific Gravity and Density of Bituminous
and 10.1.2) Paving Mixtures
ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
ASTM D2726 (Clause 10.2) Bulk Specific Gravity and Density of Non-Absorptive Compacted
Bituminous Mixtures
ASTM D2995 Practice for Estimating Application Rate and Residual Application
Rate of Bituminous Distributors
ASTM D3203 Percent Air Voids in Compacted Dense and Open Bituminous Paving
Mixtures
ASTM D3549 (Method A) 1 Thickness or Height of Compacted Bituminous Paving Mixture
Specimens
ASTM D53611 Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5444 Mechanical Size Analysis of Extracted Aggregate
ASTM D6926 Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures
BS 598 Part 104 Clause 4 Sampling and examination of bituminous mixtures for roads and other
paved areas
Methods of test for the determination of density and compaction Core
Test
BS 598 Part 107 Clause 9 Sampling and examination of bituminous mixtures for roads and other
paved areas
Method of test for the determination of the composition of design
surface course rolled asphalt
Stability and Flow
BS EN 1426 Bitumen and bituminous binders. Determination of needle penetration
BS EN 12697 Part 1 Bituminous mixtures-Test methods for hot mix asphalt
Clause B.l.5 Soluble binder content
BS EN 12697 Part 2 Bituminous mixtures-Test method for hot mix asphalt
Determination of particle size distribution
BS EN 12697 Part 6 Bituminous Mixtures-Test methods for hot mix asphalt
Determination of bulk density of bituminous specimen
Cement:
ASTM C114 (Clause 18) Chemical Analysis of Hydraulic Cement
ASTM C151/C151M Autoclave Expansion of Hydraulic Cement
ASTM C187 Amount of Water Required for Normal Consistency of Hydraulic
Cement Paste
ASTM C188 Density of Hydraulic Cement
ASTM C191 Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C204 Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C989 Compressive strength for Ground Granulated Blast Furnace Slag
BS EN 196 Part 3-Cl.7 Determination of Soundness of Cement
Concrete:
ASTM C39/C39M Compressive Strength of Cylindrical Concrete Specimens
ASTM C42/C42M Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C143/C143M1 Slump of Hydraulic-Cement Concrete
ASTM C172/C172M1 Sampling Freshly Mixed Concrete
ASTM C231/C231M1 Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C617 Capping Cylindrical Concrete Specimens
ASTM C1064/C1064M1 Temperature of Freshly Mixed Hydraulic-Cement Concrete
ASTM C1202 Electrical Indication of Concrete's Ability to Resist Chloride Ion
Penetration
BS 2484 Specification for straight concrete and clayware cable covers
Impact resistance of concrete cable covers
BS 1881 Part 122 Testing concrete
Method for determination of water absorption
BS 1881 Part 124 Clause 12.1 Testing Concrete
Methods for analysis of hardened concrete (Determination of Chloride
content in hardened concrete)
Masonry:
ASTM C140 Sampling and Testing Concrete Masonry Units and Related Units
BS 6073 Part 1 Appendix B Precast concrete masonry units
Specification for precast concrete masonry units
Appendix B: Determination of compressive strength
BS EN 772 Part 1 Methods of test for masonry units
Determination of compressive strength
Soils:
ASTM D1140 Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
ASTM D15561 Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D1557 Laboratory Compaction Characteristics of Soil Using Modified Effort
ASTM D1883 CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D2216 Laboratory Determination of Water (Moisture) Content of Soil and
Rock by Mass
ASTM D4318 Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D44291 CBR (California Bearing Ratio) of Soils in Place
ASTM D4543-08e1 (S1, FP2, Preparing Rock Core Specimens to Dimensional and Shape Tolerances
P2) (Withdrawn 2017)2
ASTM D4718/D4718M Unit Weight and Water Content for Soils Containing Oversize
Particles
ASTM D6913 Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D69381 In-Place Density and Water Content of Soil and Soil-Aggregate by
Nuclear Methods (Shallow Depth)
ASTM D7012 Method C Compressive Strength of Rock Core Specimen
ASTM G57 Electrical Resistivity Test
BS 1377 Part 9 Clause 2.5 Methods of test for soils for civil engineering purposes
In-situ tests- Nuclear methods suitable for fine, medium and coarse-
grained soils
(Filed Density test by Nuclear Gauge FDT)
BS1377 Part 2 Clause 3 Methods of test for soils for civil engineering purposes
Part 2: Classification tests
Clause 3: Determination of moisture content
BS 1377 Part 2 Clause 4.3 Methods of test for Soils for civil engineering purposes
Part 2: Classification tests
Clause 4.3: Determination of the liquid limit - Cone penetrometer
method (definitive method)
BS 1377 Part 2 Clauses 5.3 and Methods of test for Soils for civil engineering purposes
5.4 Part 2: Classification tests
Clause 5: Determination of the plastic limit and plasticity index:
- Method for plastic limit
- Derivation of plasticity index and liquidity index
BS 1377 Part 2 Clauses 9.2 & Methods of test for Soils for civil engineering purposes
9.3 Part 2: Classification tests Clause 9: Determination of particle size
distribution:
• Wet sieving method
• Dry Sieving Method
BS 1377 Part 4 Test 7 Methods of test for Soils for civil engineering purposes
Compaction-related tests.
Determination of the California Bearing Ratio (CBR)
BS 1377 Part 4 Clauses 3.5 and Methods of test for Soils for civil engineering purposes
3.6 Part 4: Compaction-related tests.
Clause 3: Determination of dry density/moisture content relationship:
- Method using 4.5 kg rammer for soils with particles up to medium-
gravel size
- Method using 4.5 kg rammer for soils with some coarse gravel-size
particles
BS 1377 Part 9 Clauses 2.1 & Methods of test for soils for civil engineering purposes
2.2 In-situ tests Clause 2: Sand replacement method
suitable for fine, medium and coarse-grained soils (large and small
pouring cylinder method)
BS 1377 Part 9 Clause 4.1 Methods of test for soils for civil engineering purposes
Part 9: In-situ tests
Clause 4.1: Determination of the vertical deformation and strength
characteristics of soil by the plate loading test
1
This laboratory meets A2LA R104 – General Requirements: Accreditation of Field Testing and Field
Calibration Laboratories for these tests.
2
This laboratory’s scope contains withdrawn or superseded methods. As a clarifier, this indicates that the
applicable method itself has been withdrawn or is now considered “historical” and not that the
laboratory’s accreditation for the method has been withdrawn.
(5)
a. List of approved Labs.
b. Photo copy from some projects approvals
QA/QC Manual
(6)
a. Revision
b. Laboratary Manual
.
1) Asphalt
2) Soil
3) Aggregates
4) Concrete
5) Chemical
Availability (Multiple Items)
Qtn. (All)
Agg Water Absorption BS 812-2 M#5 BS Testing Aggregate. Methods of Determination of Density. Water Absorption of Aggregate
Agg. Impact Value 812-112 Testing Aggregates. Methods for Determination of Aggregate Impact Value (AIV)
Bulk Density BS 812-2 M#6 Testing Aggregates. Methods of Determination of Density
Clay ASTM C 142 Standard Test Method for Clay Lump & Friable Particles in Aggregates
BS 812-106 Determination of the Shell Content Test
Crushed Face BS EN 933-5 Determination of percentage of crushed and Broken surfaces in coarse aggregates particles
CML-DM-301 Determination of % of Partially Crushed Faces of Aggregate
Testing Aggregates. Methods for Determination of Particle Shape. Elongation Index of
Elongation BS 812-105.2 Coarse Aggregate
Test for Geometrical Properties of Aggregates. Determination of Particle Shape - Flakiness
Flakiness BS 812-105.1 Index
IRT CML 1 - 97 ASTM Aggregate Immersed Rotational Test - Method
Light weight C-123 Determination of light weight particles aggregates
Standard Test Method for Resistance to Degradation of small-Size Coarse Aggregate by
Loss Angeles ASTM C131 Abrasion and Impact in the Los Angeles Abrasion Machine
Moisture Content BS 812-109 Testing Aggregates. Methods for Determination of Moisture Content
Sand Equivalent ASTM D2419 Test for geometrical properties of aggregates. Assessment of fines. Sand equivalent test
BS EN 933-8 Test for geometrical properties of aggregates. Assessment of fines. Sand equivalent test
Tests for geometrical Properties off aggregates & determination of shell content percentage
Shell content BS EN 932-7 of shells in coarse aggregates
BSEN 933-7 Shell Content
Test for Geometrical Properties of Aggregates. Determination of Particle Size Distribution.
Sieve analysis Agg BS 812-103.1 Sieving Mehod (Agg for Concrete)
Test for Geometrical Properties of Aggregates. Determination of Particle Size Distribution.
BS EN 933-1: Sieving Mehod
Test for Geometrical Properties of Aggregates. Determination of Particle Size Distribution.
BS 812-103 Sieving Mehod (Sand)
Sieve analysis Agg Bituminous Mixtures. Test Method for Hot Mix Asphalt. Determination of Particle Size
(asphalt) ASTM C136 Distribution, Binder Content, Water Content & Grading
AGG. AGG/Lab Sieve analysis Agg BS EN 12697-2 Method of Determinaion of particle size(Hot mix )
Specific Gravity Coarse BS 812-2 M#5.4 & Standard Test Method for Density, Relative Density (Specific Gravit), and Absorption of
Agg 5.5 Coarse Aggregate
Testing Aggregates. Methods of Determination of Density. Specific Gravity Test (Wire
Specific Gravity Filler BS 812-2 M#5.3 Basket Method)
Testing of Aggregates. Methods of Determination of Density Specific Gravity Test of
Specific Gravity Fine Agg BS 812-2:1995 M#5.7 Aggregate by Distilled Water and Kerosene
Ten Fine Value BS 812-111 Testing Aggregates. Method for Determination of 10% Fines Value (TFV)
Particle Density & Water
Absorption BS 812:part 2 Particle density & water absorption for aggregate 10mm nominal size and smaller
Particle density & water absorption for aggregate larger than 10mm
Finer than 75µ ASTM C117/C136 Material Finer than 75µ (o. 200) Sieve
Specific Gravity & Water
Absorption ASTM C127/C128 Dendity, Relative Density (Specific Gravity) & Water Absorption of Coarse Aggregate
Agg/Site Agg sampling BS BS 812-102 Methods for Sampling Aggregates
Agg sampling BS EN BS EN 932-2 Methods for general properties of aggregates & Mehods of sampling
Bs 812-2:1995
Asphalt
Asphalt/Lab Density Ofliquids CL#(5.7.3.2) Determination of Dilatometric Liquids Density
QCS2007 Sec.6 (5.7.1
400 Blows Table 5.2) 400 Blows Test
Application Rate ASTM ASTM D2995 Standard practice for estimating application rate for bituminous distribution
Bitumen and Bituminous Binders. Determination of Breaking Behaviour. Determination of
Application Rate BS BS 1707 Fines Mixing Time of Cationic
Standrad test method for Quantitative Extraction of Bitumen from Bituminous Paving
Binder Content ASTM ASTM D2172M#A Mixtures
Bituminous Mixtures. Test Method for Hot Mix Asphalt. Determination of Particle Size
Binder Content BSEN BS EN 12697 Distribution, Binder Content, Water Content & Grading (BC)
Core Density & dimension BS 598-104:1989 (3.4) Methods of test density & compaction
Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by
Density Asphalt By NG ASTM D6938 Nuclear Methods (Shallow Depth) (Soil)
BS 598-104 Cl#4 Sampling and examination of bituminous mixtures for roads and other paved areas —
Density Asphalt Core (QCS Core) Part 104: Methods of test for the determination of density and compaction
BS 598-107 CL#8
Density Asphalt Plugs (QCS MIX DESIGN) Methods used for the dertermination of the density and compaction
Bituminous mixtures —Test methods for hot mix asphalt —
BS EN 12697-6 Part 6: Determination of bulk density of bituminous specimens
Density Asphalt Plugs Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted
ASTM ASTM D 2726 Bituminous Mixtures1 (Core + Lab Saqmple)
Bitumen and Bituminous Binders. Determination of the Distillation Characteristics of
Asphalt
Asphalt/Lab Distilation Prime coat BS 2000-27 Petroleum Cut-Back Bitumen Products
Bituminous Mixtures. Test Methods for Hot Mix Asphalt. Preparation of Samples for
Determining Binder Content, Water Content and Grading. Bitumen Road Emulsion (Tack
Distilation Tack Coat BS 434 :part 1 Coat)
EN13589
Ductility BS 2000-520 Determination of tensile properties of modified bitumen by force ductility method
Flash Point BS 2000:Part 113 Methods of test for petroleum and its products. Flash point (closed) of cutback bitumen
Loss Of Heating ASTM D6 Standard Test Method for Loss on Heating of Oil & Asphaltic Compounds
Marshall test ASTM ASTM D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures1
Marshall test BS EN BS EN 12697-34 Bituminous mixtures —Test methods for hot mix asphalt — Part 34: Marshall test
Sampling and examination of bituminous mixtures for roads and other paved areas — Part
BS 598-107:2004 CL#9 107: Method of test for the determination of the composition of design surface course rolled
Marshall test QCS (QCS MIX DESIGN) asphalt
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous
Max Spec Gravity Asphalt ASTM D2041 Paving Mixtures
Mix Design Bs-598-107:2004 Determination of Density Stability & Flow for Asphalt Mix
CML-2-97 Retained stability Test
Penetration ASTM D5- Test Methods for penetration of bituminous materials
BS EN 1426:2007&
Potential alkali ASTM C289 Standard Test Method for Potential Alkali-Silica Reactitvity of Aggregate (Chemical Method)
Aggregate- Orgamin
Impurities ASTM C40 Test Method for Organic Impurities in Fine Aggregates for Concrete
Ch.-Concrete Calcium oxide BS 1881:Part 124 Determination of Calcium Oxide in Concrete
chloride content BS 1881:Part 124 Determination of Chloride Content in Concrete
ASTM C1218 Determination of Chloride Content by Water Extract
ASTM C1152 Determination of Chloride Content by Acid Extract
concrete AGG-content BS 1881:Part 124 Determination of Cement and Aggregate Content in Concrete
insoulible residue BS 1881:Part 124 Determination of Insoluble Residue in Concrete
Loss of ignition ASTM C114/C113 Fly ash Loss of Ignition
organic impurities ASTM C-40-99 Standard Test Method for Organic Impurities in Fine Aggregate for Concrete
PH Value BS 3068-2-50 Determination of Water Ph
soluble silica BS 1881:Part 124 Determination Of Soluble Silica in Concrete
sulphate content BS 1881:Part 124 Determination of Sulfate Content in Concrete
Fineness ASTM C430 Microsillca Fineness
Chloride Migration NT Build 492 Chloride Migration
Sodium & Potassium BS 3068-2-51 Determination of Sodium & Potassium Oxides in Water
Ch.-Cement Ammonium hydroxide BS 4550:-2: Determination Of Ammonium Hydroxide Group Content in Cement
Calcium oxide BS 4550- 2 Determination of Total Calcium Oxide of Cement
BSEN 196-2 C13.14 Determination of calcium oxide by EDTA (alternative method)
chloride content BS 4550-2 Determination of Chloride Content in Cement
Dicalcium Silicate Determination of Chloride Content in Cement
insoulible residue BS 4550-2 Determination of Insoluble Residue in Cement
iron oxide BS 4550-2 Determination of Iron Oxide in Cement
Lime content BS4550-2 Determination of Free Lime Content in Cement
Loss of ignition BS4550-2 Determination of Cement Loss on Ignition
BSEN 196-2 C7 Determination of loss of Ignition
Magnesia BS 4550-2 Determination of Magnesia in Cement
Physical Properties BS EN 197-1 Specification and conformty criteria of common cement
sulphoric anhydride BS 4550-2 Determination of Sulfuric Anhydride Content in Cement
total silica BS 4550-2 Determination of Total Silica in Cement
BSEN 196-2 C13.10 Determination of Silica oxide
total sulphur BS 4550-2 Determination of Total Sulfur Content in Cement
Fineness BSEN 196-6 Determination of Fineness
Strength Test BSEN 196-1 Determination of Strength
Setting Time & Soundness BSEN 196-3 Determination of Setting time and Soundness
Taking & Preparing
Chemical
Ch.-Cement Sample BSEN 196-7 Method of taking & preparing sample of Cement
Normal Consistency ASTM C 187 Normal Consistency of Portland Cement
HCL acid & Ammonium Decomposition with Hcl Acid and ammonium chloride and precipitation of silica (Alternative
Ch & precipitation BSEN 196-2 C13.5 Method)
Pure Silica BSEN 196-2 C13.6 Determination of Pure Silica
Magnesium Oxide BSEN 196-2 C13.15 Determination of magnesium oxide by EDTA (alternative method)
Aluminum Oxide BSEN 196-2 C13.11 Determination of Aluminum oxide
Ferric Oxide BSEN 196-2 C13.10 Determination of Ferric oxide
Total Alkalis BSEN 196-2 C17 Determination of total Alkalis (Na2O+0658 K2O)
Pozzolanicity of
Pozzolanic cements BSEN 196-5 Determination the Pozzolanicity of Pozzolanic cements
Ch, Co2, Alkali Content of
Cement BSEN 196-21 Determination of the chloride, carbondioxide and alkali content of cement
Silicon Dioxide BSEN 196-2 Determination of Silicon Dioxide
Sulphate BSEN 196-2 Determination of Sulphate
Insoluble Residue Dicalcium Silicate Determination of Insoluble Residue in Cement
Tricalcium Silicate Dicalcium Silicate Determination of Tricalcium Silicate
Dicalcium Silicate Dicalcium Silicate Determination of Dicalcium Silicate
Tricalcium Aluminate Dicalcium Silicate Determination of Tricalcalcium Aluminate
Tetracalcium
Aluminoferrite Dicalcium Silicate Determination of Tetracalcium Aluminoferrite
Silicon Oxide Dicalcium Silicate Determination of Silicon Oxide
Potassium Oxide Dicalcium Silicate Determination of Potassium Oxide
Sodium Oxide Dicalcium Silicate Determination of Sodium Oxide
SMEWW AWWA &
Ch.-Water bacteria count APHA: 2005 Total bacteria Count in water
chloride content Bs 1377:part 3 Determination of Chloride Content in Ground Water
Flextural Kerbs BS 7263-1:1994 (Kepbs) Concrete Kerb units. Requirements and test methods
Flexural Marble/Granite ASTM C880m/09 Determitation of Flexural Strength of Dimension Stone
BSEN 1340:2003
Kerb Tarnverse Strength Appendex-B2 Concrete Kerb units. Requirements and test methods
BSEN 1340:2003
Appendex-F Concrete Kerb units. Requirements and test methods
BSEN 1340:2003
kerb Water Absoroption Appendex-D Concrete Kerb units. Requirements and test methods
Landed,compacted
concrete BS 1881-113 Methods of Making & curing no fines test cube
Mix Design BS 1881-125 Concrete mix design and laboratory trial mix
Permeability BS 12390-8 Determination of Water Permeability for Hardned Concrete
RCP ASTM C 1202 Determination of RCP of Concrete
Specific Gravity ASTM C494 Determination of Specific Gravity
Water Absorption Ciramic BS 6431-11:1 EN 99 Ceramic Floor and Wall Tiles. Method for Determination of Water Absorption
Water Absorption Granite ASTM-C97M Determination of Water Absorption of Dimention Stone (Marble/Granite)
Water Absorption interlock BS 1881-122 Precast Concrete paving blocks. Specification for Paving blocks
BS 7263-1(Annex C)
Water Absorption Kerbs BS 4131:1973 Precast Concrete Flags, Kerbs, Channels & Quadrants. Determiation for Water Absorption
Water Absorption (APPENDEX A)
Terrazzo BS 12390-8 Specification for Terrazzo tiles (method of determination of water absorption)
Water Perneability BSEN 12390-7 Water Permeability of Concrete
Density Concrete Determination of Density of Compacted Fresh Concrete
ASTM C138 Determination of Density of Compacted Fresh Concrete
Water Penetration BSEN 12390-8 Method of Determination of Water Penetration
Concrete Concrete/Lab Compressive Strength BSEN 12504-1 Method of Determination of Compressive Strength of Concrete Cubes
ASTM C42 Method of Determination of Compressive Strength of Concrete Cubes
Concrete Kerbs BSEN 13410 Determination of Total Water Absorption pf Concrete Kerbs
Paving Block Strength BS 6717 Part 1 Precast concrete paving blocks Strength
Initial Surface Absorption BS 1881 - 208 Determination of the Initial Surface Absorption of Concrete
Velocity BSEN 12504-4 Ultrasonic Pulse Velocity
Concrete BSEN 196-1 Determination of Concrete Compressive Strength
Trial Test ASTM C496 Determination of Concrete admixture trial
Setting Time ASTM C497 Determination of Concrete admixture setting time
ASTM C403 Determination of Concrete admixture setting time
ASTM C109 Determination of Setting time of hardened Concrete
Activity Index Microsillica 7 Days Activty Index
Fly Ash 2 Days activity index
Fly Ash 7 Days activity index
Fly Ash 28 Days activity index
Fineness ASTM C430 Microsillca Fineness
CONC-Site fresh concrete BS 1881-113 sampling of fresh concrete & Cubes making ,curing
Air Content ASTM C231 Determination of Air Content For Fresh Concrete(Pressure Method)
Capillary Rise CSR Report 31 Capillary Rise on Concrete Cubes
Core test BSEN 1367-4 Drillig & testig concrete core
Cube Sampling BS 1881-108 Method for Making test cube from the fresh concrete
BSEN 12350-1 Sampling of Fresh Concrete
Moisture Content 0 Moisture Content of Dry Plaster
schmedt hammer ASTM ASTM C-805 Estimation of Concrete Strength by Schmedt Hammer
Schmedt Hammer BS BS 1881-202 Testing concrete. Recommendations for surface hardness testing by rebound hammer
Schmedt Hammer BS EN BS EN 12504-2 Testing concrete in structures. Non-destructive testing. Determination of rebound number
Slump BS BS 1881-102 Methods of determination of slump test
Slump BS EN BS EN 12390-2 Testing fresh concrete. Slump-test
Concrete Temperature ASTM C1064 Test Method for Temperature of Concrete
BS 1377-2:1990 M#4.5
SOIL
SOIL/Lab Atterberg Limits &5.4 Methods of test for soils for civil engineering purposes. Classification tests (Atterberg Limit)
Methods of test for soils for civil engineering purposes. Compaction-related tests (CBR-
CBR BS BS 1377-4:1990 M#7 California Bearing Ratio) BS Method
Methods of test for soils for civil engineering purposes. Compaction-related tests (CBR-
CBR CML CML 10-97 (CML) California Bearing Ratio) QCS Method
Consolidated Properties ASTM D 6528-07 Consilidated undraied dorect shear for cohive soils
Electric Resistivity ASTM G 57-95a Determination of soil resistivity
Hydrometer ASTM D 422 Hydrometer
SOIL SOIL/Lab Linear shrinkage BS 1377-2 Methods of test for soils for civil engineering purposes.Determination of linear shrikage
BS 1377-4 (M#3 Methods of test for soils for civil engineering purposes. Compaction-related tests (MDD &
MDD BS Cl.3.5 & 3.6) Moisture Content Rel.) BS Method
Methods of test for soils for civil engineering purposes. Compaction-related tests (MDD &
MDD CML CML 12-97 (CML) Moisture Content Rel.) QCS Method
Determination of Maximum & Minimum Density for Sand Material at Site - Vibrating Hammer
MDD Vibrator BS 1377-4 M#4.2 Method
Methods of test for soils for civil engineering purposes. Classification tests. (Moisture
Moisture Content (BS) BS 1377-2 M#3 Content)
Permability Constant Head ASTM D 2434 Permeability of granual soil- constant head
Permability Falling Head BS 1377-7 Test 4 Determination of Shear strength by direct Shear (in small shear box)
Sand Equivalent BS 1377-3 C9 Sand Equivalent
BSEN 933-8 Sand Equivalent
BS 1377-2:1990 (M#9 Methods of test for soils for civil engineering purposes. Classification tests. Sieve Analysis
Sieve Analysis Cl.9.2) (Backfill)
Methods of test for soils for civil engineering purposes. Classification tests. Sieve Analysis
(Rock Fill)
Methods of test for soils for civil engineering purposes. Classification tests. Sieve Analysis
(Sand)
Methods of test for soils for civil engineering purposes. Classification tests. Sieve Analysis
(Sub Base)
Specific Gravity ASTM D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
BS 1377-2:1990 M#8 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
ASTM D 1556 Test Method for Density and Unit Weight of Soil
Triaxial Shear in Soil BS 1377-7:1990 Determination of Shear strength by direct Shear (total stress)
Unconfined Comp Test ASTM D 2166 Unconfined Comp Test For cohesive soils
MDD ASTM D1557 Dry Density/Moiture Content Relation (4.5 Kg Remmer)
CBR ASTM D 1883 CBR (California Bearing Ratio) of Laboratory- Compacted Soils
Moiture Content BS 812-109 Moiture Content - Speedy Moiture Content
ASTM 4944 Moiture Content - Speedy Moiture Content
One-Dimensional
Consolidated Prop. BS 1377 Part5 Test 3 Determination of one-Dimensional Consolidated Properties of Soil
ASTM D 2435 Determination of one-Dimensional Consolidated Properties of Soil
Determination of the undrained shear strength in trixial compression withput measurement
Undrained Shear Stngt BS 1377 Part7 Test8 of pore pressure (Definitive method)
Soil Resistivity ASTM G 57-95a Soil Resistivity
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by
ASTM 5334 Thermal Neddle Probe Procedure
Compressive Strength of
SOIL
SOIL/Lab Intact Rock Core ASTM D2938 Test Method for Unconfined Compressive Strength of Intact Rock Core
Strength index & Determination of the point load strength index of rock and application to rock strength
Application to Rock ASTM D5731 classification
Compressive Strength & Standard test Method for Compressive Strength and Elastic Moduli of Intact rock core
Elastic Moduli ASTM D7012 Specimens under varying state of stress and temp
Coring /Preparing Rock Coring/Preparing rock core as cylindrical test specimance to dimentional and shape
Core ASTM D4543 tolerance
Direct Shear in Rocks ASTM D5607 Direct Shear in Rocks
Swelling Potential ASTM D4546 Swelling Potential
Density of Undisturbed
sample BS 1377-2 Density of Undisturbed sample
Direct Shear(Soil) BS 1377-7 Test 4 Determination of Shear strength by direct Shear (in small shear box)
Compressive Strength & Standard test Method for Compressive Strength and Elastic Moduli of Intact rock core
Elastic Moduli (uni axial) ASTM 3148 Specimens in Uniaxial compression
Soil/Site DISSIPATION BRI-258 Determination of Dissipation Test
Methods for test for soils for civil engineering purposes. In-situ tests (FDT by Nuclear Gauge)
FDT Nuclear Gauge ASTM D6938
BS 1377-9 (C 2.5) In-Situ Density Test ( Nuclear Gauge Method)
Methods for test for soils for civil engineering purposes. In-situ tests (FDT Sand
FDT Sand Replacemebt BS 1377-9:1990 M#2 Replacement Method)
Permeability BS 5930 Determination of Permeability Test (Constant Head Test) - Gibson Method
Permeability Soakaway BRE Digest 365 Determination of Permeability Test (Soak Away Design)
Plate Bearing BS 1377-9 M#4 Methods for test for soils for civil engineering purposes. In-situ tests (Plate-Bearing Test)
Thermal Conductivity ASTM D 5334 Determination of thermal Conductivity
Thermal Resistivity ASTM D57 Determination of Soil themal resistivity
chemical analysis of of ferrous materials Determination of manganase in steel and iron-
Steel Steel-Lab Chemical Properties BS EN 1007:1991
elecctrometric titration method
coating thickness BS EN ISO 1461 Coating Thickness test
Micrographic first generation silver gelatin of source,density specifications & methods of
Density Spec BS 6200-3.8.5
measurement
Load bearing BSEN iso 17660-1 Load bearing welding joints
Load test' No Standard Ultimate Load Test
Rebar test BS EN 10002-1 Steel Reinforcement (Rebar) Test
Reinforcement BS 4449:1997 Specification of carbon steel bar for the reinforcement of concrete
steel for the reinforcement of concrete,weldable,reinforce steel bar,coil,decoliled proudct
BS 4449:2005 + A2 spec
Steel Steel-Lab Steel corossion BSEN 4538-003 Corossion resisting steel
Tensile BS EN 524-5:1997 Determination of tisile load resistance
Bend Test BS 4449 C C6.1 Bend Test
Rebend Test BS 4449 E E1.6 Rebend Test
Tensile Test BS 4449 E E1.4 Tensile Test
Impact testing of Metallic
ASTM E23 Impact testing of Metallic Materials
Materials
Ultrasonic Examination of
BS 3923 Ultrasonic Examination of Welding
Welding
Magnetic Particle BS 6072 Magnetic Particle for Welding
Fastner Mechanical ASTM F606 Fastner Mechanical Test
ISO 891 Fastner Mechanical Test
Pull Out Test ASTM F606 Pull Out Test
ASTM E488 Method A Pull Out Test
BS EN ISO 898-1 Pull Out Test
Reclica Surface ASTM E1351 Replica Surface Microstructure
Calibration Certificate
(8)
NULEAR GUAGE
APPROVALS
(9)
a. Company Approvals.
b. Company Store Transport Approvals.
c. Machine Calibration Certificates.
d. Machine Leak Test Certificates.
e. User Certificates.
Organization Charts
(10)
a. Lab Organization.
b. Flow Chart.
c. Process chart.
Doc. No. : PLC/LQM/01
Pioneer Laboratory Company Issue No. : Issue Date :
Doha, Qatar 01 31-Jan-2010
Rev. No. :
Rev. Date
013
15-Dec-2018
LABORATORY QUALITY MANUAL
Annex 2
Annex 2:
PIONEER LABORATORY COMPANY
ORGANIZATION CHART
Engr. HUSSAM SHABBAN
GENERAL MANAGER ) 20 Years)
RECEIVED SAMPLE
YES NO ACCOUNTANT
REGISTERING IN THE
LOG BOOK
SAMPLE
PREPARATION
SAMPLE
TEST
TEST
RESULT
PRINTING
REPORTS
DELIVER TO
CUSTOMER
Customer Requirements
Measurement &
Analysis of data Reporting
Report delivery
Corrective/ Preventive Action
Customer Satisfaction
Purchasing / Stores
Customer Feedback
PIONEER LABORATORY COMPANY
SITE LAB ORGANIZATION CHART
-
Site QAQC Manager
-
Site Senior Technician
HUSSAM SHABBAN
Job Title: Laboratory Manager
Education:
1. 1998 B.Sc. Civil Engineer - Damascus University (Roads & Transportation
Division)
Experience:
Personal Information:
- Marital Status : Married
- Nationality : Syrian
- Date Of Birth : 01/05/1975
- Place Of Birth : Damascus , Syria
- Languages : Arabic & English
- Address : Doha-Qatar P.O.Box # 41028
- GSM : +974 – 66546503
Computer Skills:
1. Windows 2000 & Microsoft Office (Excel, Words, Power Point, Access )
2. Auto Cad 2000
3. Microsoft Project 2000
4. Peachtree Accounting System
Additional Skills:
1. Familiar with BS ,ASTM & AASHTO Standards and QCS
2. ISO 9001:200 internal Auditor, Iso17025 internal Auditor.
3. Nuclear Gauge certified trainer
Mohammed Dahbour
EDUCATION
DAMASCOUS,SYRIA
EXPERIENCE
Responsibilities:
• Assisting of controlling and upgrading the quality management system to achieve the
company policy.
• Focusing on customer requirements, complains analysis, and satisfactory.
• Attending the MRM.
• Technical inspections.
SKILLS
• Languages: Arabic (mother tongue) , Persian and English.
• Solid knowledge of MS environment operating systems and Microsoft Office Suite.
• Advanced skills in AutoCAD, Photoshop, Adobe Acrobat.
• Adobe Illustrator.
• Solid knowledge of construction materials.
Curriculum Vita
Mrigendranath Maiti
Personal Background:-
Nationality:- Indian
Religion:- Hinduism
Training Course:-
Language Skill:-
Personal Information:-
Experience:-
Sl.No. Name of Organization Post Duration Product
01 Pfizer Ltd.(West Bengal) Operator 1.5 K.C.P medicine powder
Years
02 Ankini Petro Chem Ltd.( Gujarat) Chemist 2 years Different kind solvent and
Petroleum Jelly
03 Bansal cement(P)Ltd. (West Bengal) Chemist 3 years Portland Slag cement &
Portland Pozzolana
cement
04 Darjeeling Cement Ltd.(West Chief 4.75 Portland Pozzolana
Bengal) Chemist Years cement
05 Nitol Cement Ind. Supervisor 3 years Birla White cement
Ltd.(Bangladesh)(A joint venture of
Aditya Birla Group)
06 Debresina Business & Industry PLC Production 5.25 Ordinary Portland Cement
( Ethiopia) Manager Years
07 Suman & Soma Vincom Pvt. Lt QC Manager 5 Portland Slag cement
(Now working at Raniganj,W.B) Months
Mrigendranath Maiti