Professional Documents
Culture Documents
Peiner Smag Machinery (India) Private Limited
Peiner Smag Machinery (India) Private Limited
PEINER Grabs
Type iVSG
Type iMZGL
PEINER SMAG MACHINERY (INDIA) PRIVATE LIMITED
Type iMZGL
PEINER radio-controlled
Single-Rope Grabs (iEGF)
The radio-controlled single-rope grabs
are highly flexible and can be used
universally with all general cargo
cranes. Their major advantage: they
do not need a power supply from the
crane – just charge the batteries and
the grab is ready for operation.
Type iEGF
Type iVSG
Type iSCG
Type iSCG
Type iVSG
PEINER SMAG MACHINERY (INDIA) PRIVATE LIMITED
PEINER Hydraulic
Clamshell Grabs (iHZG)
The hydraulic clamshell grab is used in
road construction and bulk handling
for all excavator operating weights and
material handling machines. Its
innovative shell exchange system
ensures a wide variety of applications.
The low-maintenance designs with
dust protection features are especially
environmentally friendly.
Type iHZG
Type iHZG
Type iMMG
Type iMMG
Type iMMGL
PEINER SMAG MACHINERY (INDIA) PRIVATE LIMITED
Type iMMGL
Type iVMG
PEINER SMAG MACHINERY (INDIA) PRIVATE LIMITED
Type iHMG
Type iMHG
PEINER Timber Grabs are used very cost-effectively and with maximum safety at
sea and inland ports, saw mills or timber yards.
Type iHHG
Type iSW
Designed for turning and positioning of loads such as containers, pallets, logs,
packaged goods and also grabs.
A PEINER Slewing Unit is nowadays a Special Grabs for special Type iSW
part of the basic equipment of almost
every harbour mobile crane, but it is
applications
also used on stationary cargo cranes SMAG develops, designs and
and deck cranes. Slewing units are manufactures individual solutions for
used where the crane operator is every possible application, including
required to turn loads hanging on those for extreme operating and
crane hooks. climatic conditions.
The original electro-mechanical units
with a lifting capacity of 5-32 tons are
now being supplemented by electro-
hydraulically- driven units. Today, the
lifting capacity is 200 tons and more.
Type iSW
Tong for
C-Hook
block handling
Transport
Generally, the PEINER Grabs are Cranes with higher lifting capacities
delivered on trucks by road and on flat require larger grabs that often cannot
racks by sea. Smaller grabs are be transported by road in assembled
transported in containers. When condition.
necessary, parts are dismantled.
Alternatively, the grab can be
transported in dismantled condition.
The reassembly is performed under
the supervision of a SMAG service
technician or a service partner, or by
the service personnel of the customer
in accordance with SMAG
instructions.
PEINER SMAG MACHINERY (INDIA) PRIVATE LIMITED
Technical details
Standard design
Dual scoop grabs are often used in We supply orange peel grabs with
„multi-purpose“ mode – that is, for appropriate shell forms for every type
different bulk material with different of goods:
bulk densities. For this reason, those
Open for very bulk material
grabs are equipped with features that
reduce the volume in order to handle Half-open for a variety of applications
bulk material with higher density such as shredded and mixed scrap,
without overloading the grab and the rubbish, waste, logs etc.
crane. Spill plates
Closed for biomass, HBI (hot briquet
They include spill plates with two iron) or pig iron.
volumes – closed and open spill plates
– or kick plates for multiple volume
reduction to about 50 % of the original
volume. For very light material, dust
protection covers to prevent spillage
due to wind can be offered – that is
also an environmentally friendly
solution.
Kick plates