Professional Documents
Culture Documents
Final Laboratory Test Result of Bhutaha Khola Aggregate USAID Sindhuli
Final Laboratory Test Result of Bhutaha Khola Aggregate USAID Sindhuli
[Test Method:IS-2720-PART-2-1973]
No of Test 1 2 3
No of Test 1 2 3
Natural Aggregate
Aggregate Los Angeles Specific
Moisture Bulk Density Flakiness Elongation Crushing Water Soundness
Impact Value Abrasion Gravity Value Wash Test
Content (BD) Index (FI) Index (EI) Value Absorption Test
(AIV) Value (LAA) (SG)
S.N Types of Material (NMC) (ACV)
Corrected
% gm/cc % % % % % % Percentage %
Loss
1 Aggregate 20mm Down 0.38 1.49 17.58% 21.72% 18.03 23.50 25.80 2.69 0.87 2.60 0.24
Notes:-
Samples were brought by the Contractor.
The above test value is valid for only the samples brought by the Contractor.
100
% Passing
90
80
70
60
50
40
30
20
10
0
1.00 10.00 100.00
Sieve Size, mm
W1-(W2+W3) gm 0
Specimen No. of No. of Weight Weight in grams after test Loss Percent Mean
No. Grade Charges Revolution Before Retained Passing Total in wear wear
Test on through quantity grams in
(g) 1.7 mm 1.7 mm available percent
Sieve. Sieve
1 2 3 4 5 6 7 8 9 10 11
1 B 11 500 5000 3740 1260.0 5000 0 25.20
25.80
2 B 11 500 5000 3680 1320.0 5000 0 26.40
3
4
5
6
7
8
9
10
General Remarks :- No. of Revolutions = 500 for grading A, B, C & D and 1000 for E, F & G grading.
Grading of test samples
Sieve Size (mm) Mass of Indicated Sizes (g)
Grading
Passing Retained on A C D F G
80.00 63.00 ------------- ------------- ------------- ------------- -------------
63.00 50.00 ------------- ------------- ------------- ------------- ------------- -------------
50.00 40.00 ------------- ------------- ------------- -------------
40.00 25.00 1250 ± 25 ------------- ------------- ------------- ------------- 5000±100 5000±100
25.00 20.00 1250 ± 25 ------------- ------------- ------------- ------------- ------------- 5000±100
20.00 12.50 1250 ± 10 2500 ± 10 ------------- ------------- ------------- ------------- -------------
12.50 10.00 1250 ± 10 2500 ± 10 ------------- ------------- ------------- ------------- -------------
10.00 6.30 ------------ ------------- 2500 ± 10 ------------- ------------- ------------- -------------
6.30 4.75 ------------ ------------- 2500 ± 10 ------------- ------------- ------------- -------------
4.75 2.36 ------------ ------------- ------------- 5000 ± 10 ------------- ------------- -------------
Total 5000 ± 10 5000 ± 10 5000 ± 10 5000 ± 10 10000±20010000±20010000±200
No of Spheres 12 11 8 6 12 12 12
Specimen No. of No. of Weight Weight in grams after test Loss Percent Mean
No. Grade Charges Revolution Before Retained Passing Total in wear wear
Test on through quantity grams in
(g) 1.7 mm 1.7 mm available percent
Sieve. Sieve
1 2 3 4 5 6 7 8 9 10 11
1 A 12 500 5000 3210 1790.0 5000 0 35.80
36.10
2 A 12 500 5000 3180 1820.0 5000 0 36.40
3
4
5
6
7
8
9
10
General Remarks :- No. of Revolutions = 500 for grading A, B, C & D and 1000 for E, F & G grading.
No of Test 1 2 3
Sieve size, mm Grading of original Weight of test fraction Percentage passing finer sieve Weighted average
sample, % before test, gm after test (actual percent loss) (corrected percent loss)
Average % 0.24
Sieve size, mm Grading of original Weight of test fraction Percentage passing finer sieve Weighted average
sample, % before test, gm after test (actual percent loss) (corrected percent loss)
Sieve size, mm Grading of original Weight of test fraction Percentage passing finer sieve Weighted average
sample, % before test, gm after test (actual percent loss) (corrected percent loss)
Average % 34.18
Approved By:-
Tested By:- Checked By:- Diwakar Khadka
Ashmita Shrestha Binod Giri Geotechnical Engineer
NEC Council No:- 5808-Civil"A"