Professional Documents
Culture Documents
Unit-6 Read and Interpret Plans
Unit-6 Read and Interpret Plans
Region III
GB CONSTRUCTION TRAINING PHILIPPINES INC.
FORMATIVE ASSESSMENT
2. Which of the following types of plans is the plan at the roof level?
a) Foundation plan
b) Floor plan
c) Terrace plan
d) Structural plan of a typical floor
3. A foundation plan depicts the details of different types of foundations provided for the
building.
a) True
b) False
a) Plaster, glass
b) Glass, plaster
c) Wood, plaster
d) Wood, soil
a) Single leaf, single swing door and double leaf, double swing door
b) Single leaf, double swing door and double leaf, double swing door
c) Double leaf, single swing door and single leaf, single swing door
d) Single leaf, single swing door and single leaf, double swing door
a) Sliding door
b) Revolving door
c) Stairs
d) Window
a) Washbasin
b) Plain kitchen sink
c) Refrigerator
d) Rectangular bath
10. The system which comprises of the reinforced concrete column and connecting beams
is known as __________
a) RC frame
b) RC shutter
c) RC style
d) RC hinge
11. Inertia forces generated by the earthquake shakings primarily develop at the floor of the
building.
a) True
b) False
12. It is desirable to design the RC frame in a way that the plastic hinges are formed in the
columns than in beams.
a) True
b) False
13. While considering the design of R.C. buildings for providing ductility, IS codes prohibit
the steel grade greater than _________
a) Fe 250
b) Fe 320
c) Fe 415
d) Fe 550
14. A spiral column should be preferred if the axial load is greater than ________ times the
balanced axial load.
a) 0.25
b) 0.4
c) 0.85
d) 0.96
Call of Duty: Black Ops Cold War (Launch Trailer)
15. While considering the design of R.C. buildings for providing ductility, the minimum grade
of concrete limited by the Indian Code is _________
a) M 10
b) M 20
c) M 35
d) M 50
16. According to the recommendations of IS 13920: 1993, the thickness of any part of the
wall should not be less than __________
a) 50 mm
b) 100 mm
c) 150 mm
d) 200 mm
17. Base isolation technique was first demonstrated in India after the ________
a) 2005 Kashmir earthquake
b) 1991 Uttarkashi earthquake
c) 1993 Killari earthquake
d) 1950 Assam earthquake
18. In viscous dampers, energy gets absorbed by _______ fluid which passes between the
piston-cylinder arrangement.
a) Aluminum-based
b) Iron-based
c) Silicone-based
d) Copper-based
a) Stairs
b) Almirah
c) Window
d) Shutter
21. Windows and almirahs cannot be represented on a plan if it is cut at the plinth level.
a) True
b) False
a) Heater
b) Electric bell
c) Lamp
d) Tower rail
inute
23. The symbols A and B represent _______ and _______ respectively.
a) Generator, ammeter
b) Gauge, ammeter
c) Generator, alarm
d) Gauge, alarm
View Answer
24. The symbol given below represents ________
a) Refrigerator
b) Fire hydrant
c) Fire hose
d) Flush hose
1. B
2. C
3. A
4. A
5. A
6. D
7. B
8. D
9. B
10. A
11. A
12. B
13. C
14. B
15. B
16. C
17. C
18. A
19. B
20. D
21. A
22. B
23. A
24. B
25. C