Professional Documents
Culture Documents
P N M T: PNMT (Java Version) Installation Manual (Windowsxp)
P N M T: PNMT (Java Version) Installation Manual (Windowsxp)
070727
P ASOLINK
N ETWORK
PNMT (Java version)
Installation Manual
(WindowsXP)
M ANAGEMENT
T ERMINAL
NEC Corporation
Copyright © 2007
ROI-S06445
Table of Contents
-i-
ROI-S06445
1. Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings,
-1-
ROI-S06445
(2) Click the Phone and Modem Options icon in the Control Panel window to start configuring the
modem.
-2-
ROI-S06445
(3) Enter your country and area code in the Location Information window. Click [OK].
-3-
ROI-S06445
(5) Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
(6) Check Don’t detect my modem ... and click [Next] to continue.
-4-
ROI-S06445
(7) Select Standard Modem Types from the list of Manufacturers and Standard 19200bps
Modem from the Models. Click [Next] to continue.
(8) Select Selected ports and COM#, then click [Next] to continue.
-5-
ROI-S06445
(10) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-6-
ROI-S06445
(2) Select Install from a list or specific location [Advanced] and click on [Next].
-7-
ROI-S06445
(3) Insert the USB driver CD-ROM in the computer’s disk drive and select Search for the best
driver in these locations and check Search removable media [floppy, CD-ROM ...] then, click
[Next].
-8-
ROI-S06445
-9-
ROI-S06445
4. Dial-up Setting
(1) Click Start | Settings | Control Panel and the Network Connections icon to start configuring
the Dialup setting.
(2) The Network Connections window appears. Click Create a new connection in the Network
Tasks area.
- 10 -
ROI-S06445
(3) The Welcome to the New Connection Wizard window appears. Click [Next].
(4) Select Connect to the network at my workplace and click [Next] to continue.
- 11 -
ROI-S06445
(6) Select Modem – USB Modem Driver [COM#] and click [Next] to continue.
NOTE
- 12 -
ROI-S06445
(7) In the New Connection Wizard window, enter Pnmt in the Company Name field and click
[Next] to continue.
(8) Enter any number in the Phone number field and click [Next] to continue.
- 13 -
ROI-S06445
(9) Verify that Pnmt is displayed as the connection. You can also create a shortcut on your desktop if
desired. Click [Finish].
(10) In the Connect Dial-up Connection window, click [Cancel] to continue. Click Properties in the
Connect Dial-up Connection window.
- 14 -
ROI-S06445
(11) Verify that Modem-Standard 19200 bps Modem [COM1] is displayed on the General tab in the
Dial-up Connection Properties window. Click [Configure].
- 15 -
ROI-S06445
(13) Retain the default setting on the Options tab and click the Security tab.
(14) Retain the default setting on the Security tab and click the Networking tab.
- 16 -
ROI-S06445
(15) On the Networking tab, verify that PPP ... is`displayed in the Type of dial-up server I am calling
field and uncheck File and Printer ... and Client for Microsoft....
(16) Click Settings Uncheck all the boxes in the window that appears, as shown below. Click [OK] to
go back to the previous window. Highlight Internet Protocol (TCP/IP) and then click
[Properties].
- 17 -
ROI-S06445
(17) Verify that both Obtain an IP address automatically and Obtain DNS server address
automatically are selected.
(18) In the Advanced TCP/IP Settings window, uncheck Use IP header compression for the PPP
link. Click [OK].
- 18 -
ROI-S06445
(19) Retain the default setting on the Advanced tab and click [OK].
- 19 -
ROI-S06445
NOTE
(1) Select Start Æ Setting Æ Control Panel, then, in the Add or Remove Programs window, click
Add/Remove Windows Components.
(2) The Windows Components Wizard window appears. Remove the check from Management
and Monitoring Tools, and then click Details ...
- 20 -
ROI-S06445
(3) The Management and Monitoring Tools window appears. Confirm that Simple Network
Management Protocol is not checked and click [OK]. Return to above window and click
[Next].
- 21 -
ROI-S06445
- 22 -
ROI-S06445
(7) Confirm that SNMP Service is installed and it has started automatically. Select Action Æ
Properties on the menu bar in the Services window, or right-click SNMP Service and then click
Properties in the SNMP Service pop-up menu.
(8) Select Manual in the Startup type field and click Stop in the Service status field on the General
tab. Click [OK] or [Apply].
- 23 -
ROI-S06445
(9) Confirm that the Status of both SNMP Service and SNMP Trap Service is stopped, and that the
startup condition for each one is Manual.
- 24 -
ROI-S06445
6. PNMT Setup
NOTE
(1) Insert the PNMT Installation CDROM.Open the CDROM folder and double-click install.exe.
- 25 -
ROI-S06445
(4) Specify the directory in which the PNMT is to be installed. Click [Next].
Restore Default Folder:
Click this button to choose the license key folder
Choose:
Click this button to select another directory
NOTE
- 26 -
ROI-S06445
(5) Specify the License Key file if one is available. Click [Next].
Restore Default Folder:
Click this button to revert to default path
Choose:
Click this button to choose the license key file
NOTE
You may use the PNMT on a trial basis for 30 days. After
that the PNMT can ONLY be used IF the license has been
imported (activated). To obtain the license please contact
NEC.
- 27 -
ROI-S06445
- 28 -
ROI-S06445
- 29 -
ROI-S06445
7. Launching PNMT
(1) Click Start | Programs |PNMTj |PNMT to start the application.
(2) If he following window appears, select [Unblock] (when using the Windows XP SP2 Firewall).
- 30 -
ROI-S06445
(3) Enter User name and Password, and Select the Connection Entry.
NOTE
- 31 -