Professional Documents
Culture Documents
PRES50-30 Pressure Reducing/Relieving
PRES50-30 Pressure Reducing/Relieving
PRES50-30 Pressure Reducing/Relieving
OPERATION
In its steady state, the PRES50-30 allows bidirectional flow from ➂ to ➁ with the
spring chamber constantly drained at ➀. Upon attainment of a predetermined
pressure at ➁, the valve will shift to block flow at ➂, thereby regulating pressure at ➁.
In this mode, the valve will also relieve port ➁ to port ➀ at a variable value over the
2 set reducing pressure.
The tank port pressure is additive to the pressure setting at a ratio of 1:1.
1 FEATURES
• High Pressure steel adapter on inlet port ➂ withstands up to 345 bar (5000 psi).
• Hardened spool and cage for long life.
RATINGS
Maximum Rated Pressure at Supply Port: 345 bar (5000 psi)
Regulated Pressure Range: 31 to 55.2 bar (450 to 800 psi) at no-flow
Maximum Tank Port Pressure: 68.9 bar (1000 psi)
SYMBOLS Rated Flow: 11.4 lpm (3 gpm) maximum
Maximum Internal Leakage: 131 ml/minute (8 cu. in./minute)
USASI/ISO: Temperature: -40 to 100°C with Buna N seals
-26°C to 204°C with Fluorocarbon seals
-54°C to 107°C with Polyurethane seals
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC98-3; See page 9.110.1
PERFORMANCE (Cartridge Only) Cavity Tool: CT98-3XX; See page 8.600.1
Seal Kit: SK10-2X-0_SPL; See page 8.650.1
Pressure Drop vs. Flow; 3 to 2
32 cSt/150 sus oil at 40°C
4.8/70
4.1/60
PRESSURE bar/psi
3.4/50
2.8/40
2.1/30
1.4/20
0.7/10
PRESSURE bar/psi
68.9/1000 68.9/1000
55.2/800 55.2/800
41.4/600 41.4/600
27.6/400 27.6/400
13.8/200 13.8/200
11.4 9.5 7.8 5.7 3.8 1.9 0 1.9 3.8 5.7 7.8 9.5 11.4
3.0 2.5 2.0 1.5 1.0 0.5 0.5 1.0 1.5 2.0 2.5 3.0
FLOW lpm/gpm
6.404.1 ®
HYDRAFORCE.com
®
HYDRAFORCE
PRES50-30
DIMENSIONS
1.25
Dia. 31.8 3
1.11 SAE 06
28.2
1.25
31.8 2.50
SAE 06
3 1.00 63.5
ACROSS FLATS
25.4
TORQUE
1.38 50 – 55 ft-lbs
35.0 0.78
(67.8 – 74.6 Nm)
19.8
1.41
2 35.8
4
2.58 1 2.02
65.5 2.84 51.3
72.1 3
3.25
82.6 2
INCH
MILLIMETRE 0.25 2.00 0.28
6.4 50.8 7.1
Note: Either body port 2 or body port 3 can be blocked.
MATERIALS TO ORDER
Cartridge: Weight: 0.22 kg. (0.49 lbs.); PRES50-30 - __ __ __ - __ - 08 / 04.5
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
O-rings standard.
Porting Pressure Setting
Standard Ported Body: Weight: Cartridge Only 0 04.5 31.0 bar (450 psi)
0.34 kg. (0.75 lbs.) Anodized high-
SAE 6 6T
strength 6061 T6 aluminum alloy,
rated to 207 bar (3000 psi). Ductile SAE 8 8T
iron bodies available; dimensions
may differ. See page 8.010.1. Seals
Buna N N Spring Range
Fluourocarbon V 08 31.0 to 55.2 bar
(450 to 800 psi)
Polyurethane P
Polyurethane seals are required for
operation over 241 bar/3500 psi.
®
HYDRAFORCE.com 6.404.2