Professional Documents
Culture Documents
ZX470LC-5G Hhejace1k00200041 202008
ZX470LC-5G Hhejace1k00200041 202008
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
Operating Conditions
Latest Hour Meter Reading 2,032 hr(s) Time since Delivery 0Year(s) 4Month(s)
No. of Operating Days 31 Days Machine Operating Hours 534.5 hr(s)
Operating Conditions Calendar Color Legend
Sun. Mon. Tue. Wed. Thu. Fri. Sat.
1
17.0 Daily operating hours are 10.1 hrs
16.7 255 or more.
547 8.0 Daily operating hours are 10.0 hrs
2 3 4 5 6 7 8 120 or less.
17.8 17.7 16.8 17.2 17.7 16.2 17.5
624 599 572 585 571 557 605 3.0 Daily operating hours are 6.0 hrs or
9 10 11 12 13 14 15 45 less.
17.9 18.0 18.2 17.8 17.0 17.5 16.7 No Operating
603 611 630 606 551 603 570
16 17 18 19 20 21 22
17.8 18.0 18.2 14.8 16.8 16.8 17.2
624 611 618 494 576 607 567 Item Legend
23 24 25 26 27 28 29 1 Date
17.5 17.2 17.6 16.8 17.4 16.1 17.0
565 601 626 510 603 524 595 8.0 Operating Hours[hr(s)]
30 31 120 Fuel Consumption[l]
17.6 17.3
616 578
Non-Operation Index
Ratio 20 %(109.1 hr(s)) A B C D
* The upper graph shows the value of the target machine. Efficient
The lower graph shows the average value of the region & model class.
Non-Operation ratio is low. However, fuel consumption can be reduced by stopping the A:Non-Operation ratio is 0 to 10%
Comment
engine during waiting time or short rest. B:Non-Operation ratio is 11 to 21%
C:Non-Operation ratio is 22 to 31%
* For example 20t class excavator, approximately 2 l/hr of fuel is consumed during idling and 4 l/hr of fuel is consumed during D:Non-Operation ratio is 32 to 100%
auto idling.
Swing operating time ratio is very high. In general, work efficiency can be improved by A:Swing Operation ratio is 0 to 65%
Comment
reducing swing ratio. B:Swing Operation ratio is 66 to 71%
C:Swing Operation ratio is 72 to 77%
D:Swing Operation ratio is 78 to 100%
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
* Total hours of operation may exceed engine running time due to combined operation.
* Total hours of operation may exceed engine running time due to combined operation.
* Actual operating time ratio and non-operating time ratio are respective time ratios
to the engine operating time. Other time ratios are ratios to the actual operating time.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
The table shows the operation hours in each attachment mode set by the monitors.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
The following graph indicates transition of monthly averaged daily highest temperatures.
Comment The coolant temperature of the reporting month was in the "Mid" temperature range.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
The following graph indicates transition of monthly averaged daily highest temperatures.
Comment The hydraulic oil temperature of the reporting month was in the "Mid" temperature range.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
Distribution of Temperatures
The graph shows the monthly distribution of temperatures with a summary of daily temperature.
Comment The coolant temperature of the reporting month was in the "Mid" temperature range.
Comment The hydraulic oil temperature of the reporting month was in the "Mid" temperature range.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
The graphs below show the range of pressure in the reporting period.
The horizontal axis shows the ratio for each pressure range in the reporting period.
Reporting Period 1,832 hr(s) to 2,032 hr(s)
Pump Pressure
Comment The machine operated mostly in the "Mid" pump pressure range.
The lower bar chart indicates the regional & class average.
Comment The machine operated mostly in the "Mid" pump pressure range.
The lower bar chart indicates the regional & class average.
Comment No data or insufficient data (less than 10 hours). Distribution for the reporting month cannot be displayed.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
Operating Time(Hour)
Days 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
: No operating information available.
*
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
ConSite alarms during the reporting period are shown in the reverse order of issuance up to as many as can
be shown on one page.
Number of ConSite alarms during the reporting month 0 Times
Issuance date/Number ConSite Fault Name ConSite Fault Code
of alarms
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.
Item Description
Engine Operating Hours Total hours of Actual Operating Hours and Idling Time.
Actual Operating Hours Hours which are gotten by subtracting Non-Operation Hours from engine operating
hours
Pump Pressure Pump pressure during digging and travel lever operation.
Ambient Temperature Ambient temperatures recorded on the machine tend to be higher than the actual
surrounding area temperatures since the sensor is located inside the engine cover.
Note: This report is based on data that has been registered on Global e-Service. It may not reflect the latest condition of the machine.