Professional Documents
Culture Documents
1 - Safety: Sugar Cane Harvester CH570 & CH670 Quick Reference Guide
1 - Safety: Sugar Cane Harvester CH570 & CH670 Quick Reference Guide
1 - Safety: Sugar Cane Harvester CH570 & CH670 Quick Reference Guide
I
Quick Reference Guide Switch F E
E
E
Move multi-function lever (A) forward to G - Secondary Extractor Hood Rotate Right I F
N
move harvester forward or pull back to move Switch F
harvester in reverse. D H - Base Cutter Raise Switch
I - Base Cutter Lower Switch
To put machine in neutral, move multi-function E J - Topper Raise Switch
lever to the center position. K - Topper Lower Switch
L - Elevator Swing Left Switch O
Pull lever (E) under palm rest and adjust palm M - Elevator Swing Right Switch Side Knives
www.JohnDeere.com
rest to desired position. G
N - Elevator ON and OFF Switch Q H
Press switches (G) and (H) to adjust side
O - Right-Hand Crop Divider Raise Switch knives in desired position.
S
CommandARM™ Controls P - Right-Hand Crop Divider Lower Switch
A - Left-Hand Topper Engage Switch Q
Q - Left-Hand Crop Divider Raise Switch Change direction rotation pressing switches
B P
Code: CXT14619 - F5 B - Right-Hand Topper Engage Switch M R - Left-Hand Crop Divider Lower Switch (D).
A
Quick Reference Guide C - Left-Hand Side Knife Engage Switch (If N
S - Horn Switch R
D
Equipped) C
O 5 - KNOCKDOWN ROLLERS
D - Right-Hand Side Knife Engage Switch (If F
E A
Equipped) A - Adjustable Upper Roller
E - Left-Hand Crop Divider Tilt Up Switch (If
H Control Pedals
G
B - Lower Roller
A - LH Elevator Swing Pedal (If Equipped) B
Equipped) J
P A C
D
F - Right-Hand Crop Divider Tilt Up Switch (If I
B - RH Elevator Swing Pedal (If Equipped) The position of upper roller (A) can be manually
R
Equipped) L C - LH Brake Pedal (Wheel Machines Only) adjusted or by switches (C), if equipped, in
G - Left-Hand Crop Divider Tilt Down Switch K D - RH Brake Pedal (Wheel Machines Only) desired position. B
(If Equipped) E - Steering Column Horizontal Adjustment
H - Right-Hand Crop Divider Tilt Down Switch E
S T
(If Equipped) U
The lower roller just is adjusted manually.
I - Primary Extractor Engage Switch
J - Secondary Extractor Engage Switch (If 3 - TOPPER Note:
Equipped) See Operator’s Manual for information about
Y Eliminates top and leaves of the plant in the C
K - Primary Extractor Hood Rotate Left Switch height determinate by the operator.
adjust manual of knockdown rollers.
L - Primary Extractor Hood Rotate Right
Switch V
Note:
M - Confirm Switch The height of the sugar cane determines what
N - Cancel Switch AA W position the topper should be operated.
O - Main Menu Switch
P - Home Switch X
Z
Q - Selection Dial
R - A - J Shortcut Switches 3.1 - Cutting Height Adjustment 6 - BASE CUTTER
S - Knockdown Roller Raise/Lower Switch Press switch (A) to raise or switch (B) to lower
T - Left-Hand Side Knife Raise/Lower Switch the topper until desired height. A B Is a pair of counter-rotating disks (A) with
replaceable blades (B) designed to cleanly cut
U - Right-Hand Side Knife Raise/Lower Switch Y - ClimaTrak™ Automatic Temperature
cane at ground level.
V - Elevator Reverse Switch Control
XX
A
W - Elevator Raise Switch Z - Radio Function Switches (If Equipped)
X - Elevator Lower Switch AA - Light Switches
B
Press switch (C) to raise or switch (D) to lower Engage the extractor pressing switch (A). If necessary, add oil at the fill tube (C). 14 - DIGITAL CORNERPOST DISPLAY A B C D E
the base cutter to desired cut height.
Use switches (B) to rotate extractor hood to A - Left Turn Signal Indicator
A
Press switch (E) to enable floating base cutter. F right or left. B - Stop Engine Warning Indicator
C - Service Warning Indicator
To engage harvesting functions, push down and D - Information Warning Indicator F
push forward the switch (F). E B E - Right Turn Signal Indicator
I J K G
F - Not Used
H
C G - High Beam Indicator
C L
H - Not Used
M
I - Engine Power Meter Indicator P
9 - CHOPPER Note:
Every 1000 hs
Every 1500 hs
Every 3000 hs
Every 100 hs
Every 250 hs
Every 500 hs
Every 750 hs
Every 25 hs
Every 50 hs
First 100 hs
The fuel purity and cleanliness are factors for
Cuts the clean cane billets and then delivers the proper functioning of the system.
the billets to the elevator basket.
16.3 - Maintenance Points
Note:
The choppers blades should always be in good
condition and synchronized, thus reducing
losses and increasing efficiency.
B A
Lubricate points indicated in Operator’s Manual l l
12.3 - Air Supply System
A - Primary Filter
Clean air conditioning recirculation filter l
B - Safety Filter Inspect the elevator support cable for signs of wear, frays, or breaks l
Adjust the length of the billets by turning
handle (A). Important! Change engine oil and filter l l
The safety air filters CANNOT be cleaned for
The lower the selected number, smaller will be Change hydraulic oil filters
length of the billets.
reuse. If filter is not functioning properly it must l l
be replaced.
Change fuel filters l l
Change pump drive gear case oil l l
A
Change chopper gear case oil l l
Change base cutter gear case oil l l
10 - EXTRACTOR 12.4 - Lubrication System Change final drive oil - Wheel and 2 speed track machines l l
The extractor removes trash, leaves and dirt A Check level of engine oil, removing dipstick
from the cane. (A) and level should be in the range of the A Change final drive oil - Track machines l l
crosshatch pattern of the dipstick.
Caution!
B Collect fluid sample: Hydraulic oil l
Replace fan blade when blade thickness at Note:
location (A) is at 5,00 mm (0.197 in.). See the See the Operator’s Manual for information about
Collect fluid sample: Coolant l
Operator’s Manual for details. changing the oil and filter (B) system.
Replace torsional dampener rubber blocks l
Left hand side of machine Right hand side of machine Replace thermostats and gaskets l