‘THE FEDERAL UNIVERSITY OF TECHNOLOGY, AKURE
SCHOOL OF ENVIRONMENTAL TECHNOLOGY,
DEPARTMENT OF ARCHITECTURE.
SESSION 2017/2018 SEMESTER: 2°”
COURSE TITLE: GRAPHICS COMMUNICATION I COURSE CODE: ARC 102
NO OF UNITS: 2 TIME ALLOWED: 3 HRS
Instructions: Answer four (4) questions in all. Questions one (1) and two (2) are compulsory.
Note: Emphasis shall be laid on neatness and accuracy. All drawings must be well dimensioned
and be annotated. Construction lines must be faintly indicated.
Qla. Reproduce the plan in Fig 1 below. Also draw, dimension and label a typical gable roof
across the section A - A in the figure in scale 1:50, (20 marks)
Q2a. List the types of Windows that you can propose for the building plan; draw and label any
‘two in plan, clevation and isometric to seale 1:20. (10 marks)
b. With the aid of sketch in scale 1:20, illustrate different types of doors that can be suggested
in the door spaces in figure 1 in playgglevation and isometric. (10 marks) illustrate
Q3. With the aid of neat sketch, differentiate between the following:
a. wall plate and tie beam
». window lintel and window sill
head room and ceiting height
_ rafter and purlin
€. ground floor slab and natural ground floor. (10 marks)
Q4. With the aid of neat sketches in plan, elevation and isometric view, clearly differentiate five
types of stair used in a building. (10 marks)
QS___List the different types of building that you know. Draw and label in scale 1:10 a typical
foundation detail (10 marks)