Professional Documents
Culture Documents
Readme!
Readme!
PowerMILL 8009, PowerMILL 9003, PowerMILL 10006 (up to SP6), PowerMILL 2010 RC1
x32
PowerSHAPE 8080, PowerSHAPE 8124, PowerSHAPE 2010 SP4
CopyCAD 7350, CopyCAD 2010 SP1)
PowerINSPECT 6020, PowerINSPECT 2010 SP1 (with additinal DLL patching!)
Exchange 61205
Ductpost 1516
PostProcessor v6 SP1
FeatureCAM 2010 SP5
DentMIIL 5070
Dental Suit 2010 SP4
Crispin Engineer 2.8, Crispin LastMaker 2.9, Crispin OrtoTec 2.8, Crispin
ShoeDesign 2.8, Crispin StitchTec 2.8
1.1 Delete (if exist) any Delcam PAF-fles from your computer
(C:\dcam\config\pass\*.paf, C:\Program Files\Common Files\Delcam\*.paf)
1.2 Copy folder "Flex" to any folder on computer wich suppose to be a License
Sever. It can be your own computer or any network computer.
Suppose you copy folder "Flex" to C:\Program Files\Delcam
1700 is a port to be used by Delcam FlexLM Server. If this port is already busy by
another process change it to any other in System Variable and "delcam.lic" too
- Path to the debug log file > Browse > select "C:\Program
Files\Delcam\Flex\delcam.log" (it mast be real path Flex folder!)
1.3.1.4 Be sure that two process "lmgrd.exe" and "delcam.exe" are present in
Windows Task Manager
On Windows Vista computers you can not install FlexLM as Service so you need to
start FlexLM Server in command line with CMD
- Run "lmstart.bat"
Attention!
Paths in "lmstart.bat" suppose that folder "Flex" is installed in "C:\Program
Files\Delcam"
If you copyed folder "Flex" in other location you have to edit paths in
"lmstart.bat"
If you want that "lmstart.bat" will start automatically at Windows start-up just
add a link to "lmstart.bat" in Windows autorun folder
Cause "delcam.lic" is a floating license file so with this Delcam FlexLM you can
run Delcam Application in two ways
Attention! You do not need to install Delcam FlexLM Server on CLIENT's computers,
but you need to create on each of CLIEN's computer System Variable
"DELCAM_LICENSE_FILE=1700@ServerComputerName", where "ServerComputerName" is a real
network name (or IP adress) of computer with Delcam FlexLM Server running.. SERVER
computer mast be accessable via network (local or global) for any CLIENT's
computer
Cracked by SolidSQUAD