Professional Documents
Culture Documents
BS en 12620:2002+a1:2008
BS en 12620:2002+a1:2008
BS en 12620:2002+a1:2008
Annex B
(informative)
Tables B.1 and B.2 are provided where specifiers wish to additionally describe the coarseness or fineness of fine
aggregates. Either of the tables, but not both, can be used for such descriptions.
In Tables B.1 and B.2, coarse graded fine aggregates are denoted by the letter C, medium grading by M and fine
grading by F.
Additionally, when Table B.1 is selected, a P for percentage passing the 0,500 mm sieve is added after C, M or F
(e.g. for medium grading MP).
Similarly when Table B.2 is selected an F for fineness modulus is added after C, M or F (e.g. for fine grading FF).
Fineness modulus
CF MF FF
4,0 to 2,4 2,8 to 1,5 2,1 to 0,6
Fineness modulus (FM) is used to check constancy. Where additionally required the FM of a delivery should be
within the limits of the declared FM ± 0,50 or other specified limit.
NOTE Fineness modulus (FM) is normally calculated as the sum of cumulative percentages by mass retained on the
following sieves (mm) expressed as a percentage i.e.
27