Professional Documents
Culture Documents
Products: Ventilation Air Conditioning Refrigeration Heating
Products: Ventilation Air Conditioning Refrigeration Heating
Products: Ventilation Air Conditioning Refrigeration Heating
OUTSIDE 35 C
HUMIDITY 90%
22º C Inside
PROVIDED BY
HEINEN & HOPMAN
Pre-insulated
Pre-insulated spiro ducts and components are used for the distribution of conditioned
air. Pre-insulated ducts exist of a double steel sheet with a layer of thermal insulation in
between. The thermal insultation has a thickness of 16mm, however other sizes are available
upon request.
The nominal size Ø100–500 always refers to the inner diameter, irrespective of the type in
question. There are two types to choose from, type 30 and type 50.
The inner sheath is made from standard units from the Safeprogramme. This means that
adequate properties are the same as for the corresponding Safe-units.
The outer sheath is supplied as standard with hot dip galvanised steel sheet Z 275. It can
also be made in plastic coated galvanised steel sheet, stainless steel or alu-zink to special
order.
The benefits of pre-insulated ducting and components are:
- No chance for condensation on the ducting;
- Sound reduction;
- Increased efficiency, since temperature rise of conditioned air (caused by transmission
through the ducts) is reduced to a minimum.
Rm = 1 x Ød1 Rm = 1 x Ød1
Rm = 1 x Ød1 Rm = 1 x Ød1
Rm = 1 x Ød1 Rm = 1 x Ød1
Rm = 1 x Ød1 Rm = 1 x Ød1
For un-insulated pipe For insulated pipe For un-insulated pipe For insulated pipe
HU-80 80 0,2 HUV-80 112 0,2 GU-80 80 0,2 GUV-80 112 0,2
HU-100 100 0,2 HUV-100 132 0,2 GU-100 100 0,2 GUV-100 132 0,2
HU-125 125 0,2 HUV-125 157 0,2 GU-125 125 0,2 GUV-125 157 0,2
HU-160 160 0,2 HUV-160 192 0,3 GU-160 160 0,2 GUV-160 192 0,3
HU-200 200 0,3 HUV-200 232 0,3 GU-200 200 0,3 GUV-200 232 0,3
HU-225 225 0,3 HUV-225 260 0,4 GU-225 225 0,3 GUV-225 260 0,4
HU-250 250 0,3 HUV-250 280 0,4 GU-250 250 0,4 GUV-250 280 0,4
The flexible sound attenuator exist of a perforated ALUFLEX inside and outside hose with
in between an 25mm (50mm optional) thick glass wool with a volume weight of 24kg/m3
what will cause a high sound attenuation. The sound attenuator is non-flammable according
DIN4102 A1-class.
The maximum airflow is 30 m/s, with a standard length of 500, 750, 1000, 1500 and 2000
mm.
www.heinenhopman.com