Professional Documents
Culture Documents
2.2 Mounting: Installation
2.2 Mounting: Installation
2.2 Mounting
English
Xgard Bright should be installed at the designated location with the sensor
pointing down. This ensures that dust or water will not collect on the sensor
and stop gas entering the cell. Care should be taken when installing the
detector to avoid damaging the painted surface of the enclosure.
There are two M20x1.5 entry ports on the base. One entry port will be used
for power supply input during normal operation. Unused port will be blocked
by blind plug, or can be used to connect external alarm device or be used for
connecting devices to the multi drop communications. End user will only use
certified cable gland for installation.
Production use
– mA
0
only
4-2
Alarm Level 1
Relay Output NOT USB!
SOUNDER OUT
RT
NO
Fault
Leve
NO
NC
NO
NC
Lower Board
Alarm level 2 Programming
Relay Output Connector
Alarm Level 2 Lower Board
NO/NC Jumper Fault NO/NC Sensor
Selection Jumper Selection Connector