Professional Documents
Culture Documents
Operating Instructions DVD Home Theater Sound System: Model No. SC-XH380 SC-XH370 SC-XH300
Operating Instructions DVD Home Theater Sound System: Model No. SC-XH380 SC-XH370 SC-XH300
Operating Instructions
DVD Home Theater Sound System
Model No. SC-XH380
SC-XH370
SC-XH300
Region number
The player plays DVD-Video marked with labels containing the region number or “ALL”.
2
The Middle East and South Africa 2
2 ALL 3
5
2
Southeast Asia 3
3 ALL 3
5
until
2013/05/01
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 2 ページ 2012年12月10日 月曜日 午後8時27分
≥ These operating instructions are applicable to models SC-XH380 , SC-XH370 and SC-XH300 for a variety of regions. Unless
otherwise indicated, illustrations in these operating instructions are of SC-XH380 for the Middle East and South Africa.
≥ Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit
if the controls are the same.
Accessories
Please check and identify the supplied accessories.
∏ 1 Video cable
∏ 1 HDMI cable
∏ 1 Sheet of speaker cable stickers
Figure A Figure B
Fuse cover
Figure A Figure B
Fuse Fuse
(5 ampere) (5 ampere)
RQT9812
2
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 3 ページ 2012年12月10日 月曜日 午後8時27分
TV INPUT
AV
VOL
1 2 3
4 5 6
VOL
7 8 9
CANCEL 0 10 MUTE
EXT-IN
DVD USB RADIO
START
U
EN
ME
TOP M
NU
OK
PLAY MODE RETURN
–REPEAT
SOUND SURROUND CH SELECT FL DISPLAY
–W.SRD –SLEEP
1-MIC-2
The circled numbers indicated in the operating instructions (e.g. Press [Í]1) correspond to the circled numbers in the above.
RQT9812
3
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 4 ページ 2012年12月10日 月曜日 午後8時27分
4
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 5 ページ 2012年12月10日 月曜日 午後8時27分
TABLE OF CONTENTS
Getting Started Playing Discs
Getting Started
Control reference guide. . . . . . . . . . . . . . . . . . . . . . . . . . .4 Playing from the selected item. . . . . . . . . . . . . . . . . . . . 13
Playing Discs
step 4 AC mains lead connection. . . . . . . . . . . . . . . 9 Setting the audio link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Easy control only with VIERA remote control . . . . . . . . . . 16
step 5 Preparing the remote control . . . . . . . . . . . . 9 Enjoying Karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
step 6 Easy setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Adding echo effect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using Karaoke mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Listening to the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing from an USB device. . . . . . . . . . . . . . . . . . . . . . 16
Presetting stations automatically . . . . . . . . . . . . . . . . . . . . 10
Listening to a preset channel . . . . . . . . . . . . . . . . . . . . . . . 10
Reference
Using the START menu . . . . . . . . . . . . . . . . . . . . . . . . . .10
Other Operations
Selecting the source using the remote control . . . . . . . . . . 10
Changing the player settings . . . . . . . . . . . . . . . . . . . . . 17
Listening to the TV or other device’s audio from this
Media that can be played . . . . . . . . . . . . . . . . . . . . . . . . 19
unit’s speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Speaker installation option. . . . . . . . . . . . . . . . . . . . . . . 20
Enjoying sound effects from all speakers
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Enjoying surround sound effects. . . . . . . . . . . . . . . .11
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting sound mode. . . . . . . . . . . . . . . . . . . . . . . . .12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Whisper-mode Surround . . . . . . . . . . . . . . . . . . . . . . .12
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the speaker level during playback . . . . . .12
Adjusting the front speaker balance
during playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Safety precautions. . . . . . . . . . . . . . . . . . 25
Reference
RQT9812
5
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 6 ページ 2012年12月10日 月曜日 午後8時27分
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 20.
2 Front speakers 4 Stands (with cable) 4 Bases 16 Screws
2 Surround speakers
1
Tighten securely. Slide into the groove.
2
Push!
Position the cable
between the ridges. Press into the groove.
1
Tighten securely.
Leave about 180 mm.
Caution
≥ Do not stand on the base. Be cautious when children are near.
≥ When carrying the speaker, hold the stand and base parts.
≥ Do not let foreign objects fall inside the speakers.
RQT9812
6
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 7 ページ 2012年12月10日 月曜日 午後8時27分
Getting Started
ventilation.
≥ Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 20.
1 Speaker connections
Setup example (“Surround layout (Recommended)”: Standard Pay attention to the type of speaker and the connector colour when you
surround placement) place the speakers.
Place the front, center, and surround speakers at approximately the same Speakers (rear)
distance from the seating position. The angles in the diagram are Use of the speaker cable stickers is convenient when making cable
approximate. connections.
Insert the wire fully, taking care not to insert beyond the wire insulation.
Main unit§1 i: White
Center speaker§2 j: Blue line
≥ Be careful not to cross (short circuit) or reverse the polarity of the
Front speaker Front speaker speaker wires as doing so may damage the speakers.
(left) (right) Main unit (rear)
60° Connect to the terminals of the same colour.
Subwoofer§3
[XH380]
You can enjoy surround speaker sound
120° wirelessly when you use the optional
Panasonic wireless accessory (SH-FX71).
Surround Surround For details, please refer to the operating
speaker (left) speaker (right) instructions for the optional Panasonic wireless
accessory.
§1 Position with at least 5 cm of space on all sides for proper ventilation. IMPORTANT
The speaker cables supplied with the main unit cannot be used with the
§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt
optional wireless system.
the picture if it is placed directly on the TV.
§3 Place to the right or left of the TV, on the floor or a sturdy shelf so that ≥ Remove the cables from the surround speakers (and stands), then
connect using the cables supplied with the optional wireless system.
it will not cause vibration. Leave about 30 cm from the TV.
(To insert the cables through the stands, refer to page 20.)
Depending on the room layout, you may like to use all the speakers at the
When using the optional wireless system, do not attempt to connect any
front (“Front layout (Alternative)”) (B 9, Easy setup). extra surround speakers to the main unit.
When using SH-FX71 (optional), the total RMS Dolby Digital mode power
Notes on speaker use output is changed. (B 23)
≥Use only supplied speakers
2
Using other speakers can damage the unit, and sound quality will be
negatively affected.
Radio antenna connection
≥ Do not touch the front area of the speakers. Hold by the sides.
≥ Do not let foreign objects fall inside the speakers.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
Affix this end of the antenna to a
≥ Reduce the volume in the following cases to avoid damage:
wall or pillar where the reception is
– When playing distorted sound.
best.
– When the speakers are reverberating due to a record player, a
microphone, noise from FM broadcasts, or continuous signals from an FM ANT
oscillator, test disc, or electronic instrument. (75 )
FM indoor antenna
– When adjusting the sound quality. (supplied)
Main unit (rear)
– When turning the unit on or off.
≥ These speakers do not have magnetic shielding. Do not place them
near a TV, PC, or other device that is affected by magnetic fields.
≥ Keep magnetized items away. Magnetized cards, watches, etc., can be
damaged if placed too close to the speaker. Use an FM outdoor antenna if radio reception is poor.
Caution
≥ The main unit and supplied speakers are to be used only as
indicated in this setup. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls using methods
other than those described in this manual.
RQT9812
7
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 8 ページ 2012年12月10日 月曜日 午後8時27分
≥ Do not use any other HDMI cables except the supplied one. Main unit (rear)
≥ If you use an optional HDMI cable, use the ARC compatible High Speed
HDMI cables. Non-HDMI-compliant cables cannot be utilised.
≥ It is recommended that you use Panasonic’s HDMI cable. When outputting
1080p signal, please use HDMI cables 5.0 meters or less. Alternative connection to a TV
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥ After connecting with the optical digital audio cable or HDMI§ cable, make
settings to suit the type of audio from your digital equipment (B 11).
(Only Dolby® Digital and PCM can be played with this connection.)
VIDEO IN
∫ Connection with an ARC compatible TV
TV
What is ARC?
ARC is an abbreviation of Audio Return Channel, also known as HDMI
Audio cable
ARC. It refers to one of the HDMI functions. If the TV is ARC Video cable
(not supplied)
compatible, audio from the TV can be sent to this unit via the HDMI (supplied)
cable without the need to make an extra audio connection.
8
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 9 ページ 2012年12月10日 月曜日 午後8時27分
Getting Started
Turn on your TV and select the appropriate video input mode
(e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit.
≥ To change your TV’s video input mode, refer to its operating
instructions.
AC mains lead ≥ This remote control can perform some basic TV operations (B 4).
(supplied)
RQT9812
9
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 10 ページ 2012年12月10日 月曜日 午後8時27分
3 While listening to the radio broadcast When the on-screen control panel appears
Press [OK]8. e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)
4 While the frequency is flashing on the display
Press the numbered buttons to select the channel.
A station previously stored is overwritten when another station is stored in the
same channel preset.
You can operate the playback with the indicated controls.
Confirm the audio connection to the AUX, HDMI AV OUT or DIGITAL AUDIO IN
OPTICAL terminal on the main unit when you select the corresponding sources
(B 8). Reduce the volume on the TV to its minimum, and then adjust the
volume of the main unit.
RQT9812
10
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 11 ページ 2012年12月10日 月曜日 午後8時27分
Getting Started
≥ Make sure that there is an audio connection between this unit and the
TV or other device. (B 8) ≥ The following sound effects may not be available or may have no effect
≥ Turn on the TV or/and other device. with some sources.
≥ When the Karaoke mode is “On” or a microphone is connected,
Press [EXT-IN]4 to choose the source that is used to
surround sound effects will not work.
connect this unit to the TV or other device. ≥ You may experience a reduction in sound quality when these sound
effects are used with some sources. If this occurs, turn the sound effects
≥ To change the surround sound effects and sound mode, refer to
off.
“Enjoying sound effects from all speakers” (B right).
≥ If your Panasonic TV is VIERA Link compatible, refer to “Linked
operations with the TV” (B 15) for other related functions.
When changing the surround sound effect, Whisper-mode Surround or the
sound modes, the setting is displayed on the TV screen if “DVD/CD” or “USB” is
Making settings for digital audio input the selected source during video playback.
Select to suit the type of audio from the DIGITAL AUDIO IN OPTICAL and
HDMI AV OUT terminal on the main unit. Enjoying surround sound effects
Playing Discs
≥ Underlined items are the factory presets.
Available settings Press [SURROUND];.
Mode Setting Each time you press the button:
DUAL: (Only works with Dolby Dual Mono) For “Surround layout (Recommended)”§ mode
– MAIN+SAP (stereo audio) STANDARD:
– MAIN Sound is output as it was recorded/encoded. Speaker output varies
– SAP depending on the source.
“SAP” = Secondary Audio Program MULTI-CH:
≥ Set PCM FIX mode to “OFF” to listen to the “MAIN” or You can enjoy sound from the front speakers, as well as the surround
“SAP” audio. speakers and center speaker even when playing stereo sources.
DRC: – ON MANUAL: (B below)
(Dynamic Adjust for clarity even when the volume is low by
Other Operations
While “MANUAL” is displayed, press [2, 1]8 to select
Range compressing the range of the lowest sound level and
other surround modes.
Compression) the highest sound level. Convenient for late night Each time you press [2, 1]8:
viewing. (Only works with Dolby Digital) DOLBY PLII MOVIE
– OFF Suitable for movies, or videos recorded in Dolby Surround.
The full dynamic range of the signal is reproduced. DOLBY PLII MUSIC
PCM FIX: – ON Adds 5.1-channel effects to stereo sources.
Select when receiving only PCM signals. S.SRD (Super Surround)
– OFF You can enjoy surround effect with stereo sources.
Select when receiving Dolby Digital and PCM signals. STEREO
≥ When receiving true 5.1-channel surround sound, Sound will only be output to the front speakers and the subwoofer from
select “OFF”. any source.
STB§: – SET
(CABLE/SAT Select when setting the main unit to switch to Recommended modes to enjoy TV audio or stereo
AUDIO) “D-IN” when the input channel of an HDMI connected sources from all speakers:
device (STB, etc.) is selected on the TV (B 15, “MULTI-CH”, “DOLBY PLII MOVIE”, “DOLBY PLII MUSIC” or “S.SRD”
Reference
Setting the audio link with the STB).
– OFF For “Front layout (Alternative)”§ mode
Select to cancel this setting. STANDARD:
Stereo source is output as 2.1-channel audio.
1 Press
“ARC”.
[EXT-IN]4 several times to select “D-IN” or When playing surround sources, you can enjoy 5.1-channel
surround-like effect even with all the speakers at the front.
STEREO:
2 Press
mode.
[PLAY MODE]9 and then [3, 4]8 to select the
You can play any source in stereo. Surround sound effect is
unavailable.
3 While the selected mode is displayed, press [2, 1]8 to
select the desired setting.
A.SRD (Advanced Surround):
You can enjoy surround effect with any audio source.
§ Only when “D-IN” is selected. When the signal is Dolby Digital, “/DOLBY DIGITAL” will also be
Be sure to select the device’s (STB, etc.) input channel on the TV when displayed.
making the setting. § Selected mode in “Speaker layout” (B 9, Easy setup).
The device must be connected to the Panasonic TV via an HDMI cable
and to this unit with an optical digital audio cable.
≥If the device’s (STB, etc.) input channel on the TV is changed or if you
want to change the device allocated for the linked operations, select
the “STB” mode to “OFF” in step 3 above and then select “SET”
again.
≥This function will not operate if “DIGITAL IN” is selected in “TV Audio”
(B 18).
RQT9812
11
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 12 ページ 2012年12月10日 月曜日 午後8時27分
Press and hold [–W.SRD]: to show the current setting. Pause: [; PAUSE]5
While the current setting is displayed, press [–W.SRD]: to change the ≥ Press [1 PLAY]5 to restart play.
setting.
ON ,------. OFF Skip: [SKIP:, SKIP 9]5
Adjusting the speaker level during playback Search: [SEARCH6, SEARCH5]5 (during play)
Slow-motion: [SEARCH6, SEARCH5]5 (during pause)
Only when “Surround layout (Recommended)” mode is selected in
≥ Search: Up to 4 steps
“Speaker layout” (B 9, Easy setup)
Slow-motion: Up to 3 steps
(Effective when playing 5.1-channel sound or when DOLBY PLII/“S.SRD”
≥ Press [1 PLAY]5 to start normal play.
(B 11) is selected.)
≥ [VCD] [Xvid] Slow-motion: Forward direction only.
1 Press [CH SELECT]F to select the speaker.
Each time you press the button: Frame-by-frame (during pause)
e.g. L# C# R# RS# LS# SW [DVD-V] : [2;, ;1]8
^---------------------------------------------} [DVD-V] [VCD] [Xvid] : [; PAUSE]5 (forward direction only)
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel. On-screen item select: [3, 4, 2, 1, OK]8
≥ When “S” appears, only the surround speaker channel can be [3, 4, 2, 1]8: Select
adjusted. Both surround speaker levels will be adjusted at the same [OK]8: Confirm
time.
12
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 13 ページ 2012年12月10日 月曜日 午後8時27分
Getting Started
Turn PBC function on/off: [MENU]C
Preparation
Main unit display: [FL DISPLAY]E While stopped, press [PLAY MODE]9 to select the play
[DVD-V] [MP3] [Xvid]
mode.
Time display ,-. Information display
Each time you press the button:
[JPEG] [CD] [MP3] Music Program menu
SLIDE,-.Content’s number [JPEG] Picture Program menu
[Xvid] Video Program menu
RND (Random) menu
Playing from the selected item Exit program and random menus
Playing Discs
You can select to play from your desired item while the navigation menu e.g. [MP3]
screen is displayed.
Music Program
e.g. Data disc
.. 1
Track 1 2
Group (Folder): Elapsed time Track 2 3
Track 3 4
Content (File/Track): 00:02:40
Track 4 5
6
1/3 / .../Underwater.MP3
: MP3/CD-DA .. ≥ When a content is selected, it will be programmed.
: JPEG
Perfume ≥ Repeat this step to program other items.
Underwater
Fantasy planet ≥ [MP3] [JPEG] [Xvid] To return to the previous folder, press
: Xvid Starpersons1 [RETURN]D. You can also do this by selecting “ .. ” in the
menu.
Press [3, 4]8 to select an item and press [OK]8.
2 Press [1 PLAY]5 to start play.
Other Operations
≥ Press [2, 1]8 to skip page by page.
Play starts from the selected content.
[MP3] [JPEG] [Xvid] To clear the selected program
≥ To return to the previous folder, press [RETURN]D. You can also do 1 Press [1]8 and then press [3, 4]8 to select the program.
this by selecting “ .. ” in the menu. 2 Press [CANCEL]3.
≥ Maximum: 16 characters for file/folder name. To clear the whole program
≥ Only the contents in the current group will be played. Press [1]8 several times to select “Clear All”, and then press [OK]8.
≥ If there are MP3, JPEG and Xvid contents in the current group, play will The whole program is also cleared when the disc tray is opened, the unit
be based on the selected content type. is turned off or another source is selected.
Selecting the picture in Thumbnail menu Random play
[JPEG]
[CD] All tracks will be played in random order.
Press [1 PLAY]5 to start play.
1 show
While the picture is displayed, press [TOP MENU]7 to
the thumbnail menu.
Reference
[MP3] [JPEG] [Xvid] The MP3/JPEG/Xvid contents of the selected group will
e.g.
be played in random order.
1 Press
[OK]8.
[3, 4]8 to select the desired group and press
e.g. [MP3]
RND
2 Press
/ .../Track 1.MP3
[3, 4, 2, 1]8 to select a picture and press
1/10
..
[OK]8. Track
Track
1
2
≥ Press [SKIP:, SKIP 9]5 to skip page by page. Track
Track
3
4
∫ Rotating a picture ≥ To return to the previous folder, press [RETURN]D. You can also do
While a picture is displayed, press [3, 4, 2, 1]8 to rotate the this by selecting “ .. ” in the menu.
picture.
2 [OK]8.
Press [3, 4]8 to select the desired content § and press
13
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 14 ページ 2012年12月10日 月曜日 午後8時27分
Subtitle
1 Press [FUNCTIONS]6 to show the on-screen menu.
Each time you press the button:
Menu 1 (Disc) [DVD-V] (with multiple subtitles)
e.g. [DVD-V] Menu 1 (Disc) To select subtitle language
Menu 2 (Video)
Current item ≥ On iR/iRW, a subtitle number may be shown for subtitles that are
Menu 3 (Audio)
Menu 4 (Karaoke) not displayed.
T1 C1 1/5 D5
Exit
Off O
Title Search Angle
Item name
[DVD-V] (with multiple angles)
2 Press
[OK]8.
[3, 4, 2, 1]8 to select the item and press To select a video angle
14
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 15 ページ 2012年12月10日 月曜日 午後8時27分
(VIERA Link “HDAVI ControlTM”) When the following operations are performed, the TV will automatically
switch the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn on:
– When play starts on the unit
Getting Started
What is VIERA Link “HDAVI Control”?
– When an action that uses the display screen is performed (e.g., START
VIERA Link “HDAVI Control” is a convenient function that offers linked
menu)
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI
Control”. You can use this function by connecting the equipment with ≥ When you switch the TV input to TV tuner mode or the STB input
the HDMI cable. See the operating instructions for connected channel, this unit will automatically switch to “AUX”§2, “ARC”§1, 2 or
equipment for operational details. “D-IN”§2, 3.
≥ When you start disc play, the TV will automatically switch its input mode
for this unit.
Preparation
≥ Confirm that the HDMI connection has been made (B 8). Power off link
1 Set “VIERA Link” to “On” (B 18).
(The default setting is “On”.) All connected equipment compatible with “HDAVI Control”, including this
2 Set the “HDAVI Control” operations on the connected equipment unit, automatically turn off when you switch the TV off.
(e.g., TV). To continue audio playback even when the TV is turned off, select “Video”
3 Turn on all “HDAVI Control” compatible equipment and select this unit’s (B 18, “Power Off Link” in HDMI menu).
input channel on the connected TV so that the “HDAVI Control”
Playing Discs
function will work properly.
When you press [Í]1, only this unit turns off. Other connected equipment
Whenever the connection or settings are changed, repeat this
compatible with VIERA Link “HDAVI Control” stays on.
procedure and reconfirm the points in “Setting the audio link”
(B below). For details, refer also to the operating instructions for your TV.
Speaker selection
Setting the audio link
You can select whether audio will output from this unit’s speakers or the
∫ Setting the audio link with the TV TV speakers by using the TV menu settings. For details, refer to the
operating instructions for your TV.
Select “AUX”, “ARC”§1 or “DIGITAL IN” for TV audio link.
Home Cinema
Refer to TV audio setting in Easy setup (B 9) or “TV Audio” in HDMI
This unit’s speakers are active.
menu (B 18).
≥ When you turn on this unit, this unit’s speakers will be automatically
Confirm the TV audio connection to the AUX terminal (for “AUX”), HDMI
Other Operations
activated.
AV OUT terminal (for “ARC”§1) or DIGITAL AUDIO IN OPTICAL terminal
≥ When this unit is in standby mode, changing the TV speakers to this
(for “DIGITAL IN”) on the main unit (B 8).
unit’s speakers in the TV menu will automatically turn this unit on and
select “AUX”§2, “ARC”§1, 2 or “D-IN”§2, 3 as the source.
∫ Setting the audio link with the STB ≥ The TV speakers are automatically muted.
Select “D-IN” for STB audio link. ≥ You can control the volume setting using the volume or mute button on
Refer to STB setting in “Making settings for digital audio input” (B 11). the TV’s remote control. (The volume level is displayed on the main
Confirm the STB audio connection to the DIGITAL AUDIO IN OPTICAL unit’s display.)
terminal (for “D-IN”) on the main unit (B 8). ≥ To cancel muting, you can also use this unit’s remote control (B 4).
≥ If you turn off this unit, TV speakers will be automatically activated.
TV
≥ VIERA Link “HDAVI Control”, based on the control functions provided by TV speakers are active.
HDMI which is an industry standard known as HDMI CEC (Consumer ≥ The volume of this unit is set to “0”.
Electronics Control), is a unique function that we have developed and added. – This function works only when “DVD/CD”, “USB”, “AUX”§2, “ARC”§1, 2
As such, its operation with other manufacturers’ equipment that supports or “D-IN”§2, 3 is selected as the source on this unit.
HDMI CEC cannot be guaranteed. ≥ Audio output is 2-channel audio.
≥ This unit supports “HDAVI Control 5” function. “HDAVI Control 5” is the
Reference
standard for Panasonic’s HDAVI Control compatible equipment. This
standard is compatible with Panasonic’s conventional HDAVI equipment. When switching between this unit speakers and TV speakers, the TV screen
≥ Please refer to individual manuals for other manufacturers’ equipment may go blank for several seconds.
supporting VIERA Link function.
Auto lip-sync §1 The selection works only when using an ARC compatible TV.
(For “HDAVI Control 3 or later”) §2 “AUX”, “ARC” or “D-IN” (DIGITAL IN) works depending on the TV
This function automatically provides synchronised audio and video audio setting (B left, Setting the audio link with the TV).
output. (This works only when the source is “DVD/CD”, “USB”, “AUX”§2, §3 “D-IN” (DIGITAL IN) works depending on the STB audio setting
“ARC”§1, 2 or “D-IN”§2, 3.) (B left, Setting the audio link with the STB).
≥ When using “DVD/CD” or “USB” as the source, set “Time Delay” in
Video menu to “0ms/Auto” (B 17).
RQT9812
15
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 16 ページ 2012年12月10日 月曜日 午後8時27分
Easy control only with VIERA remote control Using Karaoke mode
(For “HDAVI Control 2 or later”)
You can control the playback menus of this unit with the TV’s remote 1 on-screen
Press [FUNCTIONS]6 to select the Karaoke mode
menu. (B 14, Menu 4 (Karaoke))
control. When operating the TV’s remote control, refer to the below
illustration for operation buttons. e.g.
1 Select this unit’s operation menu by using the TV menu settings.
(For details, refer to the operating instructions for your TV.) Off
The START menu will be shown.
Karaoke Mode
e.g. [DVD-V]
DVD/CD
Playback Disc
Home Cinema 2 Press [OK]8 to enter Karaoke mode.
TOP MENU(DVD)
MENU(DVD)
Playback/menu access
3 Press [3, 4]8 to select “On” and press [OK]8 .
Input Selection
Setup
4 Press
[OK]8.
[3, 4, 2, 1]8 to select an item and press
≥ The START menu can also be shown by using a button on the TV’s
remote control (e.g. [OPTION]).
5 Press [3, 4]8 to make the settings and press [OK]8.
≥ To exit the screen, press [RETURN]D.
– When “DVD/CD” or “USB” is selected as the source, the TV’s ≥ Karaoke mode will automatically turn off when you turn this unit off,
remote control works only during stop mode. open the disc tray or select another source.
2 Select the desired item on the START menu (B 10).
Items shown differ depending on the type of disc.
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu.)
Key Control
To change the key of a song
›6 (lowest) to fl6 (highest)
Off: Normal
Vocal Cancel
You can operate the playback with the indicated controls.
≥ The on-screen control panel can also be shown by using a button on the Except [Xvid]
TV’s remote control (e.g. [OPTION]). To reduce the vocal level
– This works only during “DVD/CD” or “USB” playback and resume On: Reduces vocal level
modes. Off: Cancel
≥ This may not work depending on the type of song.
≥ Depending on the menu, some button operations cannot be performed from Audio Change
the TV’s remote control.
≥ You cannot input numbers with the numbered buttons on the TV’s remote To change the audio mode (when using Karaoke formatted disc)
control ([0] to [9]). Use this unit’s remote control to select the play list etc.
[DVD-V]
Off: Vocals off
Enjoying Karaoke V1: Vocal 1
V2: Vocal 2
V1+V2: Vocal 1 and 2
Preparation
Before connecting/disconnecting the microphone(s), reduce the volume
of the main unit to its minimum.
Select “DVD/CD” or “USB” in accordance with the source.
Playing from an USB device
You can connect and play tracks or files from USB mass storage class
1 Connect the microphone(s) (not supplied) to the
microphone jack(s)5.
devices (B 19).
Devices which are defined as USB mass storage class:
Plug type: ‰6.3 mm monaural standard plug – USB devices that support bulk only transfer.
2 Start playback and adjust the volume of the main unit.
≥ 5.1-channel sound will be down-mixed to 2-channel.
Preparation
≥ Before connecting any USB mass storage device to the unit, ensure
3 Press [SOUND]: to select “MIC VOL”. that the data stored therein has been backed up.
≥ It is not recommended to use a USB extension cable. The USB device
4 Press [2, 1]8 to adjust the microphone volume and
start singing.
connected using the cable will not be recognised by this unit.
16
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 17 ページ 2012年12月10日 月曜日 午後8時27分
Getting Started
≥ 4:3 Pan&Scan: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it
3 Press [3, 4]8 to select “Setup” and press [OK]8. fills the screen (unless prohibited by the disc).
Audio
Subtitle
DVD Menu
:
:
Auto
English
Time Delay
HDMI When connected with a Plasma display, adjust if you notice the audio is
Others out of sync with the video.
Set ≥ 0ms/Auto ≥ 20ms ≥ 40ms ≥ 60ms
RETURN
≥ 80ms ≥ 100ms
Playing Discs
Menu Current setting When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later”
compatible TV (B 15), select “0ms/Auto”.
4 Press [3, 4]8 to select menu and press [OK]8. Audio and video will automatically be set in sync.
5 Press [3, 4]8 to select the item and press [OK]8. TV System
Choose the appropriate output source when connecting to a TV
6 Press [3, 4]8 to make the settings and press [OK]8. (B 19, Video systems).
≥ NTSC: When connected to an NTSC TV.
≥ To return to the previous screen, press [RETURN]D. ≥ PAL: When connected to a PAL TV.
≥ To exit the screen, press [START]B. ≥ Auto: Selects the original output source when playing PAL or NTSC
≥ The settings remain intact even if you switch the unit to standby. discs.
≥ Underlined items are the factory settings in the following menus.
For Southeast Asia : “Auto” is the factory preset.
Other Operations
Language menu Video Resolution
This works only when the HDMI connection is being used.
Display Select suitable picture quality with your TV.
Choose the language for the on-screen messages. (Video recordings will be converted to, and output as, high-definition
For the Middle East and South Africa video.)
≥ English ≥ Français ≥ Español ≥ Deutsch ≥ Auto ≥ 480i/576i ≥ 480p/576p ≥ 720p
≥ Русский ≥ Magyar ≥ Polski ≥ Česky ≥ 1080i ≥ 1080p
Ensure that your TV can support the resolution that you choose.
For Southeast Asia
If a message screen appears, confirm your selection by pressing
≥ English ≥ 繁體中文 ≥ 简体中文 [2, 1]8 to select “Yes” and press [OK]8. If the picture is distorted, wait
for 15 seconds or press [2, 1]8 to select “No”. To accept the setting,
Audio §1
select “Yes” again.
Choose the audio language.
≥ English ≥ (Language options)§2 HD JPEG Mode [JPEG]
(This works only when using HDMI connection with “Video Resolution”
Reference
Subtitle§1 (B above) set to “Auto”, “720p”, “1080i” or “1080p”.)
Choose the subtitle language. ≥ On: HD JPEG playback is available. (JPEG images will be displayed in
original resolution.)
≥ Auto ≥ English ≥ (Language options)§2 ≥ Off
≥ Off
During HD JPEG playback, there will be no on-screen menus (B 14) and
DVD Menu §1
on-screen displays.
Choose the language for disc menus.
17
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 18 ページ 2012年12月10日 月曜日 午後8時27分
Screen Saver
Circle of constant primary listening distance This is to prevent burn marks on the TV screen.
If either distance a or b is less than c, find the difference in the table ≥ Off
and change to the recommended setting. ≥ Wait 5 min: If there is no operation for 5 minutes, the screen saver will
be shown. The TV screen will resume when you perform
a Center speaker b Surround speaker some operations. (This does not work during playback.)
Difference (Approx.) Setting Difference (Approx.) Setting
30 cm 1ms 150 cm 5ms Ratings
60 cm 2ms 300 cm 10ms Set a rating level to limit DVD-Video play.
90 cm 3ms 450 cm 15ms Setting ratings (When level 8 is selected)
≥ 1 to 7
120 cm 4ms
≥ 8 No Limit
150 cm 5ms
When you select your ratings level, a password screen is shown.
≥ C Delay (Center Delay): The default password is “0000”.
0ms, 1ms, 2ms, 3ms, 4ms, 5ms Enter the 4-digit password with the numbered buttons, and press [OK]8.
Select the delay time for your center speaker. You can change the default password (B below)
≥ LS/RS Delay (Left Surround/Right Surround Delay): Do not forget your password.
0ms, 5ms, 10ms, 15ms A message screen will be shown if a DVD-Video disc exceeding the rating
Select the delay time for your surround speakers. level is inserted in the unit.
≥ Test Tone: Follow the on-screen instructions.
Use the test tone to listen to the speaker output to confirm speaker
connections. Set Password
Test tone will be output to each channel in the following order. Change the password for “Ratings”.
Left, Center, Right, Surround Right, Surround Left, Subwoofer
To stop the test tone, press [RETURN]D. When you change the password for the first time:
The default password is “0000”.
HDMI menu Follow the on-screen instructions.
TV Audio
Select the TV audio input to work with the VIERA Link operations (B 15).
≥ AUX
≥ ARC
≥ DIGITAL IN
RQT9812
18
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 19 ページ 2012年12月10日 月曜日 午後8時27分
Video systems
Media that can be played This unit can play PAL and NTSC, but the “TV System” (B 17) of this unit
must match the system of your TV.
Commercial discs
Type of media/
Remarks Indicated as
Logo Depending on the PAL video on the disc, the image may not be displayed
Getting Started
DVD-Video High quality movie and [DVD-V] correctly on an NTSC TV.
music discs
Disc handling precautions
≥ Do not attach labels or stickers to discs. This may cause disc warping,
rendering it unusable.
≥ Do not write on the label side with a ball-point pen or other writing
instrument.
≥ Do not use record cleaning sprays, benzine, thinner, liquids which
prevent static electricity, or any other solvent.
Video CD Music discs with video [VCD]
≥ Do not use scratch-proof protectors or covers.
Including SVCD
≥ Do not use the following discs:
(Conforming to IEC62107)
– Discs with exposed adhesive from removed stickers or labels (rented
discs, etc.).
– Discs that are badly warped or cracked.
Playing Discs
– Irregularly shaped discs, such as heart shapes.
Other Operations
– Files that have been altered, edited or saved with computer picture
Type of media/ editing software may not be displayed.
Logo Formats Indicated as
≥ This unit cannot display moving pictures, MOTION JPEG and other
DVD-R/RW ≥ DVD-Video Format [DVD-V] such formats, still pictures other than JPEG (e.g. TIFF), or play
≥ MP3 format [MP3] pictures with attached audio.
≥ JPEG format [JPEG]
[Xvid] (Extension: “.XVID”, “.xvid”, “.AVI”, “.avi”)
≥ Xvid format [Xvid]
≥ Xvid files greater than 2 GB or have no index may not be played
properly on this unit.
≥ This unit supports all resolutions up to maximum of 720k480
(NTSC)/720k576 (PAL).
≥ There may be differences in the display order on the menu screen and
DVD-R DL ≥ DVD-Video Format [DVD-V] computer screen.
≥ Xvid format [Xvid] ≥ This unit cannot play files recorded using packet write.
DVD-R/RW
Reference
≥ Discs must conform to UDF bridge (UDF 1.02/ISO9660).
≥ This unit does not support multi-session. Only the default session is
played.
CD-R/RW
rR/rRW/rR DL ≥ iVR (iR/iRW Video [DVD-V] ≥ Discs must conform to ISO9660 level 1 or 2 (except for extended
Recording) Format formats).
CD-R/RW ≥ CD-DA format [CD] ≥ This unit supports multi-session but if there are many sessions it takes
≥ MP3 format [MP3] more time for play to start. Keep the number of sessions to a minimum
≥ JPEG format [JPEG] to avoid this.
≥ Xvid format [Xvid] USB device
USB device ≥ MP3 format [MP3] ≥ This unit does not guarantee connection with all USB devices.
≥ JPEG format [JPEG] ≥ This unit does not support USB device charging.
≥ Xvid format [Xvid] ≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 Full Speed.
≥ Before playback, finalise the disc on the device it was recorded on.
≥ It may not be possible to play all the above-mentioned medias in some
cases due to the type of media, the condition of the recording, the
recording method, or how the files were created (B right, About MP3/ Maintenance
JPEG/Xvid files).
≥ During playback of DTS source, there will be no sound from the
Clean this unit with a soft, dry cloth
speakers.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
Note about using a DualDisc ≥ Before using chemically treated cloth, carefully read the instructions that
The digital audio content side of a DualDisc does not meet the technical came with the cloth.
specifications of the Compact Disc Digital Audio (CD-DA) format so
playback may not be possible. Do not use commercially available lens cleaners as they may cause
malfunction. Cleaning of the lens is generally not necessary although
this depends on the operating environment.
Discs that cannot be played
Blu-ray Discs, HD DVD, AVCHD discs, DVD-RW version 1.0, DVD-Audio, Before moving the unit, ensure the disc tray is empty. Failure to
DVD-ROM, DVD-VR, CD-ROM, CDV, CD-G, SACD, DTS Music Discs, do so will risk severely damaging the disc and the unit.
WMA discs, DivX discs and Photo CD, DVD-RAM, and “Chaoji VCD”
RQT9812
available on the market including CVD, DVCD and SVCD that do not
conform to IEC62107.
19
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 20 ページ 2012年12月10日 月曜日 午後8時27分
Attaching to a wall
‰4.0 mm
‰7.0 mm to ‰9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
2 Fit the speaker securely onto the screw(s) with the hole(s).
e.g., Center speaker
DO NOT DO
≥ In this position, the speaker will ≥ Move the speaker so that the
likely fall if moved to the left or screw is in this position.
right.
∫ Tips ∫ To prevent speakers from falling
Use the measurements indicated below to identify the screwing positions Front speaker, Surround speaker, Center speaker
on the wall. ≥ You will need to obtain the appropriate screw eyes to match the walls or
≥ Leave at least 20 mm of space above the speaker and 10 mm on each pillars to which they are going to be fastened.
side to allow enough space for fitting the speaker. ≥ Use a string of less than ‰2.0 mm, which is capable of supporting over
10 kg.
[XH300] Front speaker [XH300] Surround speaker e.g. [XH380] [XH370] Front speaker
String (not supplied) Screw eye
(not supplied)
E 41 mm
F 102 mm
G 40 mm [XH380] [XH370] Reattaching the speaker cable
A 25 mm H 40 mm
B 198 mm
C 45 mm
D 45 mm
Leave about
180 mm.
Center speaker
I 18 mm
J 66 mm
RQT9812
K 25 mm
L 101 mm
M 28 mm
20
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 21 ページ 2012年12月10日 月曜日 午後8時27分
Getting Started
instructions. ≥ This is normal on Xvid video. [Xvid]
Playing Discs
This is normal when using VIERA Link “HDAVI Control 4 or later”. For
No subtitles.
details please read the operating instructions for the TV. Display the subtitles. (“Subtitle” in Menu 1) (B 14)
Other Operations
supported by this unit.
No response when remote control buttons are pressed.
≥ Check that the battery is installed correctly. (B 9) Effects do not work.
≥ The battery is depleted. Replace it with a new one. (B 9) Some audio effects do not work or have less effect with some discs.
≥ Aim the remote control at the remote control signal sensor and operate.
(B 4) Humming is heard during play.
An AC mains lead or fluorescent light is near the main unit. Keep other
Other products respond to the remote control. appliances and cables away from the main unit.
Change the remote control operating mode. (B 4)
No sound.
Cannot display the START menu. ≥ There may be a slight pause in sound when you change the play speed.
Remove the disc and then press [START]B again. ≥ If the input source is bitstream, set the sound setting to PCM on the
external equipment.
No picture or sound. ≥ When using the HDMI output, audio may not output from other
≥ Check the video or speaker connection. (B 7, 8) terminals.
≥ Audio may not be output due to how the files were created. [Xvid]
Reference
≥ Check the power or input setting of the connected equipment and the
main unit. ≥ During playback of DTS source, there will be no sound from the
≥ Check that the disc has something recorded on it. speakers. Select a different audio source (e.g. Dolby Digital). (B 14)
≥ During HD JPEG playback, there will be no video output from the
VIDEO OUT terminal. No sound from the TV.
≥ If the TV is not ARC compatible and only the HDMI connection is used,
No on-screen menus/displays. an extra audio connection is necessary. (B 8)
[JPEG] This is normal during HD JPEG playback. ≥ Confirm the audio connection. Press [EXT-IN]4 to select the
corresponding source. (B 8, 10)
You have forgotten your ratings password. ≥ When using the HDMI connection, ensure that “Audio Out” in the HDMI
Reset all the settings to Factory Preset. menu is set to “On”. (B 18)
While “DVD/CD” is the source and there is no disc inserted, press and
hold [< OPEN/CLOSE]2 on the main unit and [S10]2 on the remote No sound from the surround speakers.
control until “RESET” appears on the main unit’s display. Turn the unit off ≥ When using the “Surround layout (Recommended)” mode, press
and on again. [SURROUND]; to select “MULTI-CH”. (B 11)
All settings will return to the default values. ≥ When using the “Front layout (Alternative)” mode, press
[SURROUND]; to select “A.SRD”. (B 11)
Some characters are not displayed correctly. ≥ Ensure that the Karaoke mode is set to “Off” and a microphone is not
Characters other than English alphabet and Arabic numerals may not be connected.
displayed correctly. [XH380] When using the optional wireless system
Press and hold [FUNCTIONS]6.
The VIERA Link “HDAVI Control” function does not ≥ If “WIRELESS SPEAKERS LINKED” is displayed on the main unit’s
display:
respond. – Check that the surround sound effect is set to output sound from the
Depending on the condition of this unit or the connected equipment, it surround speakers (B 11).
may be necessary to repeat the same operation so that the function can – Check that the speaker cables are correctly connected to the wireless
work correctly. (B 15) system.
– Check that the surround selector switch is set in the centre position on
The setting you made in “TV Aspect” (B 17, Video menu) or the wireless system. Then, turn the wireless system off and back on.
“Display” (B 17, Language menu) does not work. ≥ If “WIRELESS SPEAKERS NO LINK” is displayed on the main unit’s
The settings for “TV Aspect”§1 and “Display”§2 will automatically follow the display:
RQT9812
information from the TV. (B 9, Easy setup) – Check that the wireless system is turned on.
§1 When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or – Check that the digital transmitter is fully inserted into the slot of the
later” compatible TV main unit.
§2 When using VIERA Link “HDAVI Control” with “HDAVI Control 2 or
later” compatible TV 21
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 22 ページ 2012年12月10日 月曜日 午後8時27分
Picture
Messages
The picture on the TV is not displayed correctly or
disappears. The following messages or service numbers may appear on the TV or
unit's display.
≥ The unit and TV are using different video systems.
For the Middle East and South Africa
Use a multi-system or PAL TV. TV displays
For Southeast Asia
Use a multi-system or NTSC TV. “/”
≥ The system used on the disc does not match your TV. The operation is prohibited by the unit or disc.
– Change the “TV System” settings to match your TV. (B 17)
(Depending on the PAL video on the disc, the image may not be “/ Incorrect Disc Region”
displayed correctly on an NTSC TV.) Only DVD-Video discs that include or have the same region number as
≥ Ensure that the unit is connected directly to the TV, and is not the one on the rear panel of this unit can be played. (B Cover page)
connected through a VCR. (B 8)
≥ Mobile telephone chargers can cause some disturbance. Unit displays
≥ If you are using an indoor TV antenna, change to an outdoor antenna.
≥ The TV antenna wire is too close to the unit. Move it away from the unit. “NO PLAY”
≥ Reduce the number of connected HDMI devices. ≥ You inserted a disc the unit cannot play; insert one it can. (B 19)
≥ When using the HDMI AV OUT terminal, ensure that an incompatible ≥ You inserted a blank disc.
video output with the connected TV is not selected. Set the “Video ≥ You inserted a disc that has not been finalised.
Resolution” in Video menu to “480p/576p”. (B 17)
≥ Video images converted to 1920k1080 resolution may look different “NO DISC”
from the true native 1080p full-HD sources. This is not a malfunction of ≥ You have not inserted a disc; insert one.
the main unit. ≥ You have not inserted the disc correctly; insert it correctly. (B 12)
Picture size does not fit the screen. “USB OVER CURRENT ERROR”
≥ Change “TV Aspect” in the Video menu. (B 17) The USB device is drawing too much power. Switch to “DVD/CD” mode,
≥ Use the TV to change the aspect. remove the USB and turn the unit off.
≥ Change the zoom setting. (“Zoom” in Menu 2) (B 14)
≥ [JPEG] This is normal during HD JPEG playback. Set “HD JPEG Mode” “F61”
to “Off” if you want to perform zoom function. (B 17)
Check and correct the speaker cable connections. If this does not fix the
problem, consult the dealer. (B 7)
Menu is not displayed correctly.
Restore the zoom ratio to “Normal”. (“Zoom” in Menu 2) (B 14) “F76”
There is a power supply problem. Consult the dealer.
Display is distorted.
[JPEG] This is normal when the display switches to/from HD JPEG “DVD U11”
playback.
Disc may be dirty. Wipe it clean.
22
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 23 ページ 2012年12月10日 月曜日 午後8時27分
VIDEO SECTION
Specifications Video system PAL, NTSC
Composite video output
GENERAL Output level 1 Vp-p (75 ≠)
Power supply AC 220 V to 240 V, 50/60 Hz Terminal Pin jack (1 system)
Power consumption 75 W HDMI AV output
Getting Started
Dimensions (WtHtD) 460 mmk48.5 mmk265 mm Terminal 19-pin type A connector
Mass Main unit 2.4 kg HDAVI Control This unit supports “HDAVI Control 5” function.
Operating temperature range 0 oC to r40 oC SPEAKER SECTION
Operating humidity range 35 % to 80 % RH (no condensation)
[XH380] [XH370] [Front\speakers\SB-HF4800]
Power consumption in standby mode approx. 0.4 W Type 2 way, 2 speaker system (Bass reflex)
Speaker unit(s) Impedance 3 ≠
AMPLIFIER SECTION
1. Full range 6.5 cm Cone type
RMS Output Power: Dolby Digital Mode
2. Super tweeter Piezo type
Front Ch 160 W per channel (3 ≠), 1 kHz, 10 % THD
Output sound pressure 77 dB/W (1 m)
Surround Ch 160 W per channel (3 ≠), 1 kHz, 10 % THD
Frequency range 75 Hz to 18 kHz (j16 dB)
Center Ch 160 W per channel (3 ≠), 1 kHz, 10 % THD
82 Hz to 17 kHz (j10 dB)
Subwoofer Ch 200 W per channel (3 ≠), 100 Hz, 10 % THD
Dimensions (WtHtD) 90 mmk524 mmk70 mm
Total RMS Dolby Digital mode power 1000 W§
Playing Discs
Mass 0.96 kg
Full assembly with stand base
§ [XH380] When using SH-FX71 (optional), the total RMS Dolby Digital Dimensions (WtHtD) max 270 mmk1185 mmk270 mm
mode power output is changed to 930 W. Mass 2.45 kg
[XH300] [Front\speakers\SB-HF3000]
FM TUNER, TERMINALS SECTION
Type 2 way, 2 speaker system (Bass reflex)
Preset Memory FM 30 stations Speaker unit(s) Impedance 3 ≠
Frequency Modulation (FM) 1. Full range 6.5 cm Cone type
Frequency range 87.50 MHz to 108.00 MHz (50-kHz step) 2. Super tweeter Piezo type
Antenna terminals 75 ≠ (unbalanced) Output sound pressure 77 dB/W (1 m)
Digital audio input Frequency range 90 Hz to 18 kHz (j16 dB)
Optical digital input Optical terminal 80 Hz to 17 kHz (j10 dB)
Other Operations
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz Dimensions (WtHtD) 90 mmk223 mmk89 mm
USB Port Mass 0.65 kg
USB standard USB 2.0 Full Speed [XH380] [XH370] [Surround\speakers\SB-HS4800]
Media file format support MP3 (¢.mp3) Type 2 way, 2 speaker system (Bass reflex)
JPEG (¢.jpg, ¢.jpeg) Speaker unit(s) Impedance 3 ≠
Xvid (¢.xvid, ¢.avi)
1. Full range 6.5 cm Cone type
USB device file system FAT12, FAT16, FAT32
2. Super tweeter Piezo type
USB Port power Max. 1000 mA
Bit rate Up to 4 Mbps (Xvid) Output sound pressure 77 dB/W (1 m)
Frequency range 75 Hz to 18 kHz (j16 dB)
Mic jack
82 Hz to 17 kHz (j10 dB)
Sensitivity 0.7 mV, 1.2 k≠ Dimensions (WtHtD) 90 mmk524 mmk70 mm
Terminal Mono, 6.3 mm jack (2 systems) Mass 0.96 kg
DISC SECTION Full assembly with stand base
Dimensions (WtHtD) max 270 mmk1185 mmk270 mm
Discs played (8 cm or 12 cm)
Mass 2.45 kg
(1) DVD (DVD-Video, Xvid§4, 5)
Reference
[XH300] [Surround\speakers\SB-HS4000]
(2) DVD-R (DVD-Video, MP3§2, 4, JPEG§3, 4, Xvid§4, 5)
(3) DVD-R DL (DVD-Video, Xvid§4, 5) Type 2 way, 2 speaker system (Bass reflex)
(4) DVD-RW (DVD-Video, MP3§2, 4, JPEG§3, 4, Xvid§4, 5) Speaker unit(s) Impedance 3 ≠
(5) iR/iRW (Video) 1. Full range 6.5 cm Cone type
(6) iR DL (Video) 2. Super tweeter Piezo type
(7) CD, CD-R/RW (CD-DA, Video CD, SVCD§1, MP3§2, 4, JPEG§3, 4, Output sound pressure 77 dB/W (1 m)
Xvid§4, 5) Frequency range 90 Hz to 18 kHz (j16 dB)
§1 Conforming to IEC62107 110 Hz to 17 kHz (j10 dB)
§2 MPEG-1 Layer 3, MPEG-2 Layer 3, MPEG-2.5 Layer 3 Dimensions (WtHtD) 80 mmk143 mmk75 mm
§3 Exif Ver 2.1 JPEG Baseline files Mass 0.48 kg
Picture resolution:
16:9 min. size 4k4, max. size (720k8)k(405k8); [Center\speaker\SB-HC3000]
4:3 min. size 4k4, max. size (720k8)k(540k8) Type 1 way, 1 speaker system (Bass reflex)
§4 The total combined maximum number of recognizable audio, Speaker unit(s) Impedance 3 ≠
picture and video contents and groups: 2600 audio, picture and Full range 6.5 cm Cone type
video contents and 259 groups. (Excluding Root folder) Output sound pressure 77 dB/W (1 m)
§5 Plays Xvid video. Frequency range 80 Hz to 18 kHz (j16 dB)
100 Hz to 17 kHz (j10 dB)
Pick up
Dimensions (WtHtD) 155 mmk86 mmk78 mm
Wavelength (DVD/CD) 655/790 nm Mass 0.53 kg
[Subwoofer\SB-HW185]
Type 1 way, 1 speaker system (Bass reflex)
Speaker unit(s) Impedance 3 ≠
Woofer 20 cm Cone type
Output sound pressure 83 dB/W (1 m)
Frequency range 35 Hz to 220 Hz (j16 dB)
40 Hz to 180 Hz (j10 dB)
Dimensions (WtHtD) 232 mmk406 mmk316 mm
Mass 5.7 kg
RQT9812
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital spectrum analyzer. 23
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 24 ページ 2012年12月10日 月曜日 午後8時27分
Licenses
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
24
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 25 ページ 2012年12月10日 月曜日 午後8時27分
Safety precautions
WARNING CAUTION
Unit Unit
Getting Started
≥ To reduce the risk of fire, electric shock or product damage, ≥ This unit utilizes a laser. Use of controls or adjustments or performance
– Do not expose this unit to rain, moisture, dripping or splashing. of procedures other than those specified herein may result in hazardous
– Do not place objects filled with liquids, such as vases, on this unit. radiation exposure.
– Use only the recommended accessories. ≥ Do not place sources of naked flames, such as lighted candles, on this
– Do not remove covers. unit.
– Do not repair this unit by yourself. Refer servicing to qualified service ≥ This unit may receive radio interference caused by mobile telephones
personnel. during use. If such interference occurs, please increase separation
– Do not let metal objects fall inside this unit. between this unit and the mobile telephone.
– Do not place heavy items on this unit. ≥ This unit is intended for use in tropical climates.
AC mains lead Placement
≥ To reduce the risk of fire, electric shock or product damage, ≥ Place this unit on an even surface.
– Ensure that the power supply voltage corresponds to the voltage ≥ To reduce the risk of fire, electric shock or product damage,
printed on this unit. – Do not install or place this unit in a bookcase, built-in cabinet or in
Playing Discs
– Insert the mains plug fully into the socket outlet. another confined space. Ensure this unit is well ventilated.
– Do not pull, bend, or place heavy items on the lead. – Do not obstruct this unit’s ventilation openings with newspapers,
– Do not handle the plug with wet hands. tablecloths, curtains, and similar items.
– Hold onto the mains plug body when disconnecting the plug. – Do not expose this unit to direct sunlight, high temperatures, high
– Do not use a damaged mains plug or socket outlet. humidity and excessive vibration.
≥ The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the socket Batteries
outlet immediately. ≥ Danger of explosion if battery is incorrectly replaced. Replace only with
the type recommended by the manufacturer.
≥ Mishandling of batteries can cause electrolyte leakage and may cause a
fire.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
Other Operations
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Remove the battery if you do not intend to use the remote control for a
long period of time. Store in a cool, dark place.
≥ When disposing the batteries, please contact your local authorities or
dealer and ask for the correct method of disposal.
Reference
25
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 22 ページ 2012年12月10日 月曜日 午後8時27分
Panasonic Corporation p
Web Site: http://panasonic.net