Professional Documents
Culture Documents
AMB4519R24v06: Antenna Specifications
AMB4519R24v06: Antenna Specifications
AMB4519R24v06: Antenna Specifications
2MXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-65/65/65/33/33-
15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M-R
EasyRET Hybrid Multi-beam Antenna with Integrated 7 RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 960 (r1) 2 x (1695 - 2690) (y5/y6)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
Electrical downtilt (°) 2 - 12, continuously adjustable 2 - 12 , continuously adjustable , each band separately
at mid Tilt 14.7 15.0 15.1 15.2 16.2 16.7 16.9 16.7
Gain (dBi)
over all Tilts 14.5 ±0.5 14.8 ±0.4 14.9 ±0.4 15.0 ±0.5 16.1 ±0.7 16.5 ±0.5 16.7 ±0.6 16.5 ±0.8
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 64 ±6 63 ±7 61 ±6 62±7 62 ±4 61 ±3 60 ±5 59 ±5
Vertical 3dB beam width (°) 11.0 ±0.9 10.0 ±0.7 9.7 ±0.6 9.1 ±0.5 9.2 ±0.7 8.3 ±0.6 7.3 ±0.5 6.9 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio total, ±30° (dB) > 21 > 22 > 22 > 22 > 22 > 22 > 22 > 22
Cross polar ratio at boresight (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 16 > 18
Max. power per input (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
2 x (1695 - 2690) (y1/y2/y3/y4)
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 17.3 18.0 18.5 18.2
Gain (dBi)
over all Tilts 17.1 ±0.8 17.8 ±0.8 18.3 ±0.8 18.0 ±0.8
Side lobe suppression for first side
> 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 36 ±4 32 ±3 31 ±2 30 ±2
Vertical 3dB beam width (°) 9.9 ±0.8 9.1 ±0.7 7.8 ±0.5 7.2 ±0.5
VSWR < 1.5
Horizontal beam centers (°) ±30 ±28 ±27 ±24
Cross polar isolation (dB) ≥ 25
Beam to Beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 25 > 26 > 28 > 28
Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 15
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1
AMB4519R24v06
2MXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-65/65/65/33/33-
15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M-R
EasyRET Hybrid Multi-beam Antenna with Integrated 7 RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 499 x 206
106
Packing dimensions (H x W x D) (mm) 2360 x 550 x 245
Antenna weight (kg) 44.1
(530)
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 58.0 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
2009
1420
Operational temperature (℃) -40 .. +65
Frontal: 730 (at 150 km/h)
Wind load (N) Lateral: 380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 14 x 4.3-10 Female
Connector position Bottom
59
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0F01 Mechanical downtilt: 0 - 12° 3.1 kg 1 (Separate packing)
2
AMB4519R24v06
2MXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-2690-65/65/65/33/33-
15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M-R
EasyRET Hybrid Multi-beam Antenna with Integrated 7 RCUs - 2.0m
Integrated RET Specifications
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWxxxx……….y2
HWxxxx…….....y1
y6 y2 y4
HWxxxx…….....y6
g HWxxxx………..r1
HWxxxx……….y3 y5 y1 y3
HWxxxx……….y4
r1
g HWxxxx…….....y5
r - Red y - Yellow
B - Bottom array T - Top array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2020-02-25