Professional Documents
Culture Documents
Reference Guide: " Cutting-Edge Solutions For Next Generation Networks."
Reference Guide: " Cutting-Edge Solutions For Next Generation Networks."
Generation Networks.”
REFERENCE
GUIDE
Table of Contents
Introduction..................................................................................................................................................................1
FMT Series
1 RU Fiber Termination/Splice Drawers with Adapters or Pigtails.................................................................................4
2 RU Fiber Termination/Splice Drawers with Adapters or Pigtails.................................................................................5
1 RU Fiber Termination Drawers with Multifiber Cable (Preterminated).......................................................................6
2 RU Fiber Termination Drawers with Multifiber Cable (Preterminated).......................................................................7
2 RU Fiber Termination Drawers with MPO Connectors..............................................................................................8
1 RU Adapter-Only Fiber Termination Drawers............................................................................................................9
2 RU Adapter-Only Fiber Termination Drawers..........................................................................................................10
1 RU Fiber Termination/Storage Drawers..................................................................................................................11
1 RU Slack Storage Drawers.....................................................................................................................................12
1 RU Splice Drawers.................................................................................................................................................13
1 RU – Drawer Accessories
Sliding Adapter Pack..........................................................................................................................................14
Mini Splice Tray..................................................................................................................................................14
Wall Mount Kit, Cable Clamp Kit and Vertical Cable Guide.................................................................................14
2 RU – Drawer Accessories
Sliding Adapter Pack..........................................................................................................................................15
Mini Splice Tray..................................................................................................................................................15
Cable Clamp Kit and Vertical Cable Guide..........................................................................................................15
FPL Series
5 RU High-Density Termination and Splice Panels.....................................................................................................16
1 RU High-Density Termination and Splice Panels.....................................................................................................17
Fiber Termination/Splice Panels with Adapters or Pigtails..........................................................................................18
Fiber Termination Panels with Multifiber Cable (Preterminated)................................................................................20
Fiber Termination Panels with Adapters or Pigtails....................................................................................................22
Splice and Storage Drawers......................................................................................................................................24
Panel Accessories
Splice Tray..........................................................................................................................................................25
Miscellaneous Accessories..................................................................................................................................25
106612AE
FL2000 Series
Fiber Termination/Splice Panel with Adapters or Pigtails............................................................................................26
Empty Termination/Splice Chassis.............................................................................................................................27
Fiber Termination Panels with Multifiber Cable (Preterminated)................................................................................28
Fiber Termination Panels with Adapters or Pigtails....................................................................................................29
Empty Termination Chassis.......................................................................................................................................30
Slack Storage Solutions
Storage Deck Chassis.........................................................................................................................................31
Storage Deck.....................................................................................................................................................31
•
Chassis Solutions
Splice Chassis.....................................................................................................................................................32
Panel Accessories
19-Inch Rack Mount Installation Kits
Standard Mount Kit....................................................................................................................................33
Flush Mount Kit..........................................................................................................................................33
Maximum Mount Kit...................................................................................................................................34
23-Inch Rack Mount Installation Kits
Wide VCG Mount Kit..................................................................................................................................35
Centered Mount Kit....................................................................................................................................36
FL1000 Series
Next Gen Network Solutions
NGF
Fiber Main Distributing Frame..................................................................................................................................57
106612AE
8-Inch FCM
Fiber Main Distributing Frame (Rear Load)................................................................................................................76
Preterminated Fiber Termination Panels with Multifiber Cable – IFC..........................................................................77
Adapter-Only Fiber Termination Panels.....................................................................................................................78
Splice Panels............................................................................................................................................................79
Frame Accessories
Interbay Management Panel...............................................................................................................................80
Next Gen Network Solutions
LSX
High-Density Distribution Frame Solution (using 288-Termination-Only panel)..........................................................89
High-Density Distribution Frame Solution (using 288-Termination/Splice panel).........................................................90
Homerun Splitter Solution (using 288-position panel)...............................................................................................91
Traditional LSX Universal Fiber Distributing Frame Solution.......................................................................................92
Preterminated Fiber Termination Panels with Multifiber Cable..................................................................................93
Adapter-Only Fiber Termination Panels.....................................................................................................................94
Preterminated Fiber Termination/Splice Panels with Pigtails.......................................................................................95
Splice Panels............................................................................................................................................................97
Frame Accessories
Frame Installation Kit..........................................................................................................................................98
AC Outlet Kit and Raceway................................................................................................................................99
Panel Accessories
Splice Tray........................................................................................................................................................100
106612AE
OMX600®
Fiber Distributing Cabinets.....................................................................................................................................101
Preterminated Fiber Termination Panels with Pigtails...............................................................................................102
Preterminated Fiber Termination Panels with Multifiber Cable – IFC........................................................................103
Adapter-Only Fiber Termination Panels...................................................................................................................104
Splice Panels..........................................................................................................................................................105
Cabinet Accessories
•
Cabinet Solutions................................................................................................................................................109
Accessories
Cable Clamping Kit..........................................................................................................................................110
Splice Tray........................................................................................................................................................110
Breakout Kit for Ribbon in Loose Buffer Tube (RLBT) OSP Cable........................................................................111
Next Gen Network Solutions
Monitor Module
•
Types...............................................................................................................................................................126
Options...........................................................................................................................................................126
6/09
Splitter Module
Types...............................................................................................................................................................128
Options...........................................................................................................................................................128
Splitter Module Ordering Info..........................................................................................................................129
WDM Module
Types...............................................................................................................................................................130
Options...........................................................................................................................................................130
Component Types............................................................................................................................................130
WDM Module Ordering Info............................................................................................................................131
CWDM Module
Types..............................................................................................................................................................132
Options..........................................................................................................................................................132
CWDM Module Ordering Info.........................................................................................................................133
Innovative Products.........................................................................................................................................135
Recommended and Maximum Patch Cord Densities........................................................................................136
Applications
Combining System Parts.................................................................................................................................137
Downspout Drop Options...............................................................................................................................138
Express Exit™ Drop Options ............................................................................................................................138
Trumpet Flare Options.....................................................................................................................................139
4x24-Inch Island T .........................................................................................................................................139
Cut-in T and Fitting .......................................................................................................................................140
Supporting Overhead Systems........................................................................................................................141
Plenum FiberGuide®
Introduction....................................................................................................................................................152
System Description.........................................................................................................................................153
Recommended Patch Cord Densities...............................................................................................................154
Vertical FiberGuide®
Components...................................................................................................................................................158
Next Gen Network Solutions
Applications....................................................................................................................................................158
Ordering Info..................................................................................................................................................159
Patch Cords
Singlemode Patch Cords (Simplex and Duplex)................................................................................................166
Multimode Patch Cords (Simplex and Duplex).................................................................................................167
Singlemode Multifiber Patch Cords (4- to 24-fibers)........................................................................................168
Multimode Multifiber Patch Cords (6- and 12-fibers).......................................................................................169
Intrafacility Fiber Cable (IFC) Assemblies
Singlemode IFC Assemblies.......................................................................................................................170
Multimode IFC Assemblies........................................................................................................................171
In-Line Attenuators......................................................................................................................................172
106612AE
FasTerm® Connectors
Singlemode....................................................................................................................................................173
Multimode......................................................................................................................................................173
Tool Kit...........................................................................................................................................................173
Accessories.....................................................................................................................................................173
Fiber Cable
Compact Building™ Cable: Plenum..................................................................................................................176
6/09
Accessories..........................................................................................................................................................206
Compression Lugs for Two-Hole Stud-Type Input Power Connections...............................................................206
GMT Fuses/Fuse Designation Pins – Alarm Indicator..........................................................................................206
KLM Fuses – Non-Indicator...............................................................................................................................207
KLM Fuse Panel Cap.........................................................................................................................................207
TPA Fuses – Alarm Indicator..............................................................................................................................207
Carling Breakers and TPC Fuses/Fuse Holder.....................................................................................................208
DSX-1 Products
DSXi ®
Family Comparison................................................................................................................................................209
Design Elements....................................................................................................................................................210
84-Termination Rear Cross-Connect Panels............................................................................................................211
64-Termination Rear Cross-Connect Panels............................................................................................................212
56-Termination Rear Cross-Connect Panels............................................................................................................213
84-Termination Front Cross-Connect Panels...........................................................................................................214
64-Termination Front Cross-Connect Panels...........................................................................................................215
56-Termination Front Cross-Connect Panels...........................................................................................................216
84-Termination Total Front Access Cross-Connect Panels........................................................................................217
64-Termination Total Front Access Cross-Connect Panels........................................................................................218
56-Termination Total Front Access Cross-Connect Panels........................................................................................218
106612AE
FlexDSX®
84-Termination Rear Cross-Connect Panels............................................................................................................223
84-Termination Front Cross-Connect Panels...........................................................................................................223
64-Termination Front Cross-Connect Panels...........................................................................................................224
56-Termination Front Cross-Connect Panels...........................................................................................................225
Front or Rear Cross-Connect Skeleton Bays............................................................................................................226
•
Rack Hardware......................................................................................................................................................227
6/09
DSX-1 Accessories
Cross Aisle Panels..................................................................................................................................................235
Interbay Patch Panels.............................................................................................................................................236
20-Position Fuse Panel...........................................................................................................................................237
GMT Fuses.............................................................................................................................................................237
Cable Troughs........................................................................................................................................................238
Bay Tracer Illuminator.............................................................................................................................................239
Next Gen Network Solutions
Communications Panels.........................................................................................................................................240
Communications Panel Accessories........................................................................................................................241
Writing Shelves......................................................................................................................................................241
DSX-3 Products
Chassis..................................................................................................................................................................264
6/09
Cable Management...............................................................................................................................................264
36- or 24-Termination/Position Loaded and Unloaded Chassis................................................................................265
Skeleton Bay..........................................................................................................................................................266
Total Front Access Interconnect Modular System – Minimum Point of Presence (MPOP)
DS3 MPOP-FA Series..............................................................................................................................................277
DS3 MPOP-WMSB Series – Secure Wall Mount Box................................................................................................278
Rack Hardware....................................................................................................................................................279
Auxiliary Equipment
Cross Aisle Panels..................................................................................................................................................281
Interbay Patch Panels.............................................................................................................................................282
Maintenance Repeater Products.............................................................................................................................283
DS3 Portable Bridging Office Repeater...................................................................................................................286
Extend™ Optical/Electrical Line Extender.................................................................................................................287
Fuse Panels............................................................................................................................................................288
Horizontal Cable Troughs.......................................................................................................................................289
Accessories
Circuit Guard Plugs ...............................................................................................................................................290
Termination Plugs...................................................................................................................................................290
Termination Connector – BNC................................................................................................................................290
Looping Cords.......................................................................................................................................................290
Specialty Adapters.................................................................................................................................................291
Replacement LEDs..................................................................................................................................................292
PatchCords
106612AE
Coaxial Connectors................................................................................................................................................298
Tracer Pins.............................................................................................................................................................298
6/09
Multifunction Panels
Introduction...........................................................................................................................................................301
MFP Modules.........................................................................................................................................................302
MFP Chassis...........................................................................................................................................................303
Timing Jackfields.................................................................................................................................................322
100 Ω Category 3 24 AWG FTP Tight Twist Riser Cable (1161A. Equiv.)............................................................343
100 Ω Category 3 24 AWG FTP Riser Cable ....................................................................................................344
Category 6a Products
CopperTen® Category 6a UTP................................................................................................................................353
CopperTen® Category 6a Plenum Data Cable.........................................................................................................354
CopperTen® Category 6a Riser Data Cable.............................................................................................................355
CopperTen® Augmented Category 6 Patch Panels..................................................................................................356
Next Gen Network Solutions
Category 6 Products
Category 6 Plenum Cable......................................................................................................................................360
Category 6 Riser Cable...........................................................................................................................................363
Category 6 Bundled Plenum Cable.........................................................................................................................366
Category 6 – C6T 4 Pair Outdoor Cable.................................................................................................................369
Category 6 Patch Panels.........................................................................................................................................372
Category 6 Dynamic Angle Right/Left Patch Panels.................................................................................................374
Category 6 KM8 Modular Jacks.............................................................................................................................375
Category 6 Patch Cords.........................................................................................................................................376
Category 5e Products
Category 5e Plenum Cable.....................................................................................................................................377
Category 5e Riser Cable CMR................................................................................................................................380
Category 5e Bundled Riser Cable...........................................................................................................................383
Category 5e – The Outback® Outdoor Cable..........................................................................................................386
Category 5e Patch Panels.......................................................................................................................................389
Category 5e Dynamic Angle Right/Left Patch Panels...............................................................................................390
Category 5e K610 Series Modular Jacks.................................................................................................................391
Category 5e Patch Cords.......................................................................................................................................392
MDU iFDT.............................................................................................................................................................448
•
Transport Solutions
T1 Service Delivery
Wideband 3190, ThinMux™ Multiplexer, HiGain® CO Shelves, Test Shelves and Cards/Management.......................492
HiGain HDSLx CO Line Unit, Remote Units, Repeaters/Doublers..............................................................................494
Fiber Optic DS1 Delivery Solutions..........................................................................................................................495
Campus-RS™..........................................................................................................................................................498
Megabit Modems..................................................................................................................................................501
E1 and Fiber
Soneplex® E1 Quad Loop Extender Module (EQLX).................................................................................................502
DAML/DLC
PG-Flex® Micro-DLC System...................................................................................................................................503
PG-Plus® Subscriber Carrier System........................................................................................................................504
•
6/09
Index.........................................................................................................................................................................509
LSX............................................................................................................................................................ 103742AE
High-Density Distribution Frame Solutions............................................................................................. 106370AE
Homerun Splitter Solution (using 288-position panel)............................................................................ 106370AE
Accessories............................................................................................................................................... 103742AE
8-Inch FCM Standard VAM Chassiss –12 Single Plug-In Modules......................................................... 101663AE
Applications.............................................................................................................................................. 104892AE
DSX-1 Products
FlexDSX®................................................................................................................................................... 103253AE
106612AE
Quick Literature Reference
DSX-3 Products
•
Rear Access Interconnect Modular System – Minimum Point of Presence (MPOP)............................. 103866AE
Total Front Access Interconnect Modular System – Minimum Point of Presence (MPOP).................. 103866AE
Accessories............................................................................................................................................... 103866AE
T1 Service Delivery
Wideband 3190, ThinMux™ Multiplexer, HiGain® CO Shelves,
Test Shelves and Cards/Management...................................................................... 104732AE, 102485AE, 1256786
HiGain HDSLx CO Line Unit, Remote Units, Repeaters/Doublers................................................................... 106669AE
Fiber Optic DS1 Delivery Solutions............................................................................................ 102692AE, 102739AE
DAML/DLC
PG-Flex® Micro-DLC System........................................................................................................................ 100040PR
PG-Plus® Subscriber Carrier System............................................................................................................. 100060PR
Welcome to the Next Gen Networks Reference Guide. This comprehensive guide provides a brief
overview of the majority of ADC’s connectivity products.
The Reference Guide is organized into several major sections:
• Outside Plant – Fiber and Copper Solutions
Introduction
• Inside Plant – Fiber Solutions
Next Gen Network Solutions
Contents
Fiber Optichere............................................................................XX
Panels......................................................................... 4
Contents
Optical Distribution
here............................................................................XX
Frames........................................................57
Contents
Fiber Entrance
here............................................................................XX
Cabinets............................................................109
Contents
Optical Splitters
here............................................................................XX
and Combiners...............................................118
FiberGuide®
Fiber Management System...................................134
Contents here............................................................................XX
Fiber Cable
Contents Assemblies and Connectors...................................161
here............................................................................XX
Fiber Cable...............................................................................176
Contents here............................................................................XX
Contents here............................................................................XX
Features
• Terminates and splices 12-, 16- or 24-fibers in
an all front access design
Next Gen Network Solutions
1 RU 24-Termination/Splice Drawer
(Right Splice Cable Entry)
Catalog Number
FMT - __ __ __ 0 __ 0 __ __ __ - A __ __ P
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• Terminates and splices 48-fibers in an all-
front-access design
Next Gen Network Solutions
FMT-GTL 0 __ 0 __ __ __ - A48 P
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
Next Gen Network Solutions
• A
llows for termination of a 24-fiber cable
preterminated with IFC or OSP and shipped
attached to the panel
• Minimizes installation time and expense
Inside Plant – Fiber Solutions
Catalog Number
FMT - __ N 2 __ __ __ __ __ __ - A 24 P
Cable Type
Multimode Cable Length
Y IFC stranded 50/125 µm riser 008 8 m (25')
C IFC stranded 62.5/125 µm riser 016 16 m (50')
106612AE
6 LC
Singlemode
6/09
7 SC ultra polish
J SC angled polish
2 FC ultra polish
8 LC ultra polish
Z LC angled polish
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• P rovides termination for 72- or 96-fibers
Next Gen Network Solutions
Singlemode
031 31 m (100')
7 SC ultra polish
039 39 m (125')
J SC angled polish
046 46 m (150')
2 FC ultra polish
061 61 m (200')
8 LC ultra polish
077 77 m (250')
Z LC angled polish
092 92 m (300')
122 122 m (400')
153 153 m (500')
•
6/09
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• L ow-loss MPO to LC breakout cables enable test • Sliding adapter packs grouped into counts of
access points for each card, provide single-circuit eight LC adapters allow access to each individual
access for moves, adds or changes and high- fiber from one card, eliminating the possibility of
quality terminations induce minimum insertion disturbing adjacent fibers
loss in circuit • Panel provides a demarcation point for MPO
• Total front access termination drawer allows quick • MPO insertion loss (1310 and 1550 nm):
and easy connection between active equipment 0.5 dB maximum; 0.2 dB typical
and fiber distribution frame line-up
• MPO return loss (1310 and 1550 nm):
• Industry-leading cable management protects bend -65 dB minimum
radius, provides clean and organized cable routing
pathways and protects traffic-carrying fiber from • LC insertion loss (1310 and 1550 nm):
physical damage 0.3 dB maximum; 0.1 dB typical
• LC return loss (1310 and 1550 nm):
106612AE
-55 dB minimum
Ordering Information
Description Catalog Number
2 RU termination panel with MPO connectors
80-position panel loaded with MPO to LC/UPC assemblies FMT-GM7B808F0-A80P
(8-fiber female APC MPO to 64-LC terminations)
•
Features
• Provides termination for 24- or 32-fibers in an
all-front-access design
Next Gen Network Solutions
Catalog Number
FMT- __ R T 0 __ 0 A 0 __ - A __ __ P
Multimode 0 No lock
9 SC 1 Lock, key type #1
6 LC
Singlemode All 19- or 23- inch mounting
7 SC ultra polish brackets are reversible and can
J SC angled polish mount in EIA or WECO racks.
2 FC ultra polish
8 LC ultra polish
Z LC angled polish
•
6/09
Features
• Provides termination for 72- or 96-fibers
in an all-front-access design
Next Gen Network Solutions
Catalog Number
FMT-GRT0 __ 0 A 0 __- A __ __ P
6 LC
Singlemode
Lock Type
7 SC ultra polish
J SC angled polish 0 No lock
2 FC ultra polish 1 Lock, key type #1
8 LC ultra polish
Z LC angled polish
•
6/09
Features
• Terminates and stores 12- or 24-fibers in an all-
front-access design
Next Gen Network Solutions
Catalog Number
FMT- __ __ __ 0 __ 0 A 0 __ - A __ __ P
7 SC ultra polish
J SC angled polish
6/09
2 FC ultra polish
8 LC ultra polish
Z LC angled polish
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• Offers bulk storage for up to 60 fibers and
discrete slack storage for up to 16 fibers
Next Gen Network Solutions
Capacity
Slack storage type 3.0 mm cable 2.0 mm cable 1.7 mm cable
Bulk 32 cables, 2.5 m each 48 cables, 2.5 m each 60 cables, 4 m each
Catalog Number
FMT - D __ __ 0 0 0 00 __ - A 00 P
106612AE
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
1 RU Splice Drawers
Next Gen Network Solutions
1 RU Splice-Only Drawer
Catalog Number
Lock Type
0 No lock
1 Lock, key type #1
106612AE
•
6/09
Ordering Information
Description Catalog Number
Multimode
SC FMT-2SAP09
Sliding Adapter Pack
LC FMT-2SAP06
Inside Plant – Fiber Solutions
Singlemode
SC ultra polish FMT-2SAP07
SC angled polish FMT-2SAP0J Cable
FC ultra polish FMT-2SAP02
LC ultra polish FMT-2SAP08
Cable
LC angled polish FMT-2SAP0Z
Ordering Information
•
Ordering Information
Description Catalog Number
Multimode
SC FMT-6SAP09
LC 6 pack FMT-6SAP06
LC 8 pack FMT-8SAP06
Ordering Information
•
Features
• P rovides termination and splicing for up to
144 fibers (288 fibers with LC connectors)
Next Gen Network Solutions
Catalog Number
FPL-144 R __ 0 __ -_______ __ 0
J SC angled polish 2
LC connectors and adapters double the capacity of the panel by
2 FC ultra polish terminating two fibers at each adapter.
6/09
2
8 LC ultra polish 3
Termination-only panels have a 12-inch depth, termination/splice
2
Z LC angled polish panels have a 15-inch depth and splice trays cannot be added to
termination-only panels.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• Panels are only 1 RU (1.75-inch) high
Next Gen Network Solutions
• Up to 48 connections in 1 RU of space
• A
vailable in 12- or 24-port termination-only or
termination/splice within a single panel
1 RU Termination/Splice Panel
• U
sing LC small-form-factor connectors doubles
the capacity of each panel
• A
ngled left and right connectors allow easy
cable routing from left and right
Catalog Number
Multimode 1
2
9 SC LC connectors and adapters double
6/09
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• A
vailable in 12-, 24-, 48-, 72-, 96-,
144- and 288-termination densities
Next Gen Network Solutions
• O
ptional lock for both front and rear doors
available separately – (not available on 1 RU)
• Removable front polycarbonate door
• Designation labels included with each panel 24-Position Termination/Splice Panel
(Rear View)
• M
ounting brackets included with panel may
be flipped to accommodate 19- or 23-inch
mounting with either four- or five-inch recess
Catalog Number
• A
vailable in 12-, 24-, 48-, 72-, 96-,
144- and 288- (LC connectors only)
Next Gen Network Solutions
termination densities
• P reterminated with factory-installed multifiber
intrafacility cable (IFC) or outside plant
(OSP) cable
• P anels with multifiber cable attached ship as
a single unit with cable clamp installed
• E quipped with customer specified adapters,
Inside Plant – Fiber Solutions
Catalog Number
FPL- ______ __ __ / __ __ __ __ __ __ __
A B
Next Gen Network Solutions
with LC connectors)
6/09
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
44 mm
Features
(1.75")
• Available in 12-, 24-, 48-, 72-, 96-, 144- and
288-termination densities
Next Gen Network Solutions
3
• Density doubles with use of LC connectors
• Panel may be ordered with adapters only for 12-Position Panel
a termination-only interconnect solution
305 mm
• Panel may be ordered with 3.5 m pigtails for (12")
use with splice and storage panels
• Rear panel pigtail storage
4 front and rear doors
• Optional lock for both
Inside Plant – Fiber Solutions
(5.25")
E LLAHS DN NO NOITA
A CDA OT MROFNI
VER DECUDOR Y
PER ,DEIPO RATEIRPORP
REBMUN G TRAP NI RO C ,DESU EB
ECNEREFER NIWARD
C .CDA FO T
ELOHW NI
NESNOC N DESOLCSID RO
TON
222 mm 222 mm
(8.75") (8.75")
106612AE
222 mm
•
222 mm (8.75")
(8.75")
6/09
Catalog Number
1
S tandard multimode pigtails
are 62.5/125 µm.
2
LC connectors and adapters double
106612AE
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
417 mm
Features (16.4")
• A
vailable in 24-, 48-, 72- and 96-splice
densities. Each drawer provides splicing
Next Gen Network Solutions
(8.7")
• H
inged transparent front door protects
storage drawers and cables from damage
during routine activity at or near the panel
305 mm (12") 555 mm (21.9")
• M
ounting brackets included with panel
can flip to accommodate 19- or 23-inch
mounting with either four- or five-inch recess
96-Position Termination Panel
• Designation labels included with each panel (With FPL-SR2000 Mounted Below)
417 mm
(16.4")
555 mm
(21.9")
87 mm
305 mm
(3.4")
(12")
305 mm
(12")
122 mm
(4.8")
FPL-SR2024
417 mm
(16.4")
106612AE
555 mm
(21.9")
177 mm
(7")
FPL-SR2000
(Top View with Drawer Open)
305 mm
(12")
•
FPL-SR2072
6/09
Ordering Information
Description Catalog Number
24-fiber splice drawer, rack mount FPL-SR2024
48-fiber splice drawer, rack mount FPL-SR2048
72-fiber splice drawer, rack mount FPL-SR2072
96-fiber splice drawer, rack mount FPL-SR2000
Splice Tray
For use with FPL termination/splice panels.
Ordering Information
Description Splice Trays Type Splice Quantity Catalog Number
12-position splice tray
Bare fusion FST-FT
Heat shrink (single fiber fusion) single height 12 FST-HS
Mechanical (mass fusion) FST-MT
24-position splice tray
Bare fusion FST-D-FT
Heat shrink (single fiber fusion) dual height 24 FST-D-HS
Mechanical (mass fusion) FST-D-MT
Miscellaneous
106612AE
Ordering Information
Description Catalog Number
Lock
Key lock #1 IPA-K1
Key lock #2 IPA-K2
Screwdriver lock IPA-SC
•
Features
• Termination and splice panel • VCG ships with each panel
Next Gen Network Solutions
• Uses ADC’s splice deck or splice wheel • Uses FL2000 6paks with angled retainers
258 mm
(10.1") 498 mm
(19.6")
126 mm
(5")
133 mm
(5.25")
Inside Plant – Fiber Solutions
Catalog Number
FL2 - C 0 -
6 LC1
Singlemode Latch Type
7 SC ultra polish 0 Latch
J SC angled polish 5 K1 lock
2 FC ultra polish
8 LC ultra polish1 Number of Cable Clamps
B LC angled polish1 0 1 clamp (standard)
2 2 clamps
Pigtail or Adapter Type2
•
0 None or N/A
stranded softwall bundle
M Mechanical
R Singlemode or multimode 62.5/125 µm
(mass fusion)-wheel
12-fiber ribbon
W Heat shrink fusion
C Multimode 50/125 µm
(single fiber fusion)-wheel
stranded softwall bundle
1 Bare fusion
1
LC connectors and adapters double the capacity of the panel 2 Heat shrink fusion
by terminating two fibers at each adapter. (single fiber fusion)-deck
2
6-fiber softwall bundle except with LC connectors, which uses 12-fiber. 3 Mechanical
3
Mounting kit shipped unattached if other than standard mounting style.
(mass fusion)-deck
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
24-Position Termination/Splice Chassis
• Mounting
Next Gen Network Solutions
Ordering Information
Features
• P anels with preterminated multifiber cable
(IFC or OSP) ship as a single unit with cable
Next Gen Network Solutions
clamp installed
• C
ustomizable panels come equipped with
customer specified number of adapters, retainers,
connectors, cable type and cable length
• P anels with multifiber cable attached save costly
installation time
Termination Panels
(With Multifiber Cable)
Inside Plant – Fiber Solutions
Catalog Number
FL2 - __ __ __ 0 __ __ __ __ __ - __ __ __ 0
Panel Type
S Singlemode
Latch Type
M Multimode
0 Latch
Panel Capacity Panel Height 5 K1 Lock
1 12-position 1.75" (1 RU)
Cable Exit Direction
2 24-position 3.5" (2 RU)
4 48-position 5.25" (3 RU) U Up
7 72-position 8.75" (5 RU) D Down
9 96-position 10.5" (6 RU)
Mounting Style 2
Connector and Adapter Type
A 19" standard
Multimode C 19" flush mount
9 SC D 23" centered
6 LC1
Cable Length
Singlemode
106612AE
9 96
Cable Type
A 144 (LC connectors only with
72-position panel) Multimode
C IFC stranded 62.5/125 µm riser
1 LC connectors and adapters double the capacity of the Y IFC stranded 50/125 µm riser
panel by terminating two fibers at each adapter. Singlemode
2 Mounting kit shipped unattached, if other than standard
A IFC stranded riser
mounting style.
M IFC ribbon riser
L OSP armored ribbon (24-fibers and up)
Other configurations are available upon request. Please contact ADC Technical Assistance center.
Features
• Termination-only panel
• VCG ships with each panel
Next Gen Network Solutions
257 mm 498 mm
(10.1") (19.6")
126 mm
(5") 133 mm
(5.25")
Catalog Number
FL2 - R 0 0 - 0 0
Number
Panel Capacity Panel Height of Ports
Loaded
1 12-position 1.75" (1 RU)
2 24-position 3.5" (2 RU)
4 Pigtail or Adapter Type 2
48-position 5.25" (3 RU)
7 72-position 8.75" (5 RU) A Adapter-only
106612AE
2 FC ultra polish
A 19" standard
8 LC ultra polish1
C 19" flush mount
6/09
B LC angled polish1
D 23" centered
1
LC connectors and adapters double the capacity
of the panel by terminating two fibers at
each adapter. Latch Type
2
6-fiber softwall bundle except with LC connectors,
which uses 12-fiber. 0 Latch
3
Mounting kit shipped unattached, if other than 5 K1 lock
standard mounting style.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• Mounting
- 19-inch EIA racks or cabinets, standard
Next Gen Network Solutions
five-inch recess
- Wall mounting option available 24-Position Termination Chassis
- Other mounting kits available
• Hinged on left front side; allows full access to
rear of front plate and interior of panel
• FL2000 6pak adapter plug-ins ordered separately
• Equipped with removable metal doors with
Inside Plant – Fiber Solutions
Plexiglas®1 windows
• Designation labels included with each panel
• Complete line of accessories including locks
for security
72-Position Termination Chassis
• Ships with vertical cable guide (VCG)
Ordering Information
Storage Deck
Next Gen Network Solutions
Ordering Information
89 mm
Description Catalog Number (3.5")
Storage Deck
(Top View)
FL-TR2000
(5") 498 mm
Stores up to 137 m (550') using oval storage method (19.6")
126 mm
Features (5")
89 mm
(3.5")
• O
ffers a combination of splicing protection
and associated fiber/pigtail storage
Next Gen Network Solutions
protection
Bottom Splice
• Accepts the ADC splice deck Side Deck
Splice Deck
Ordering Information
Splice deck
6/09
Standard
– LMount
eft-side 2.5" wide vertical cable guide (VCG)
(5") (5")
(as shipped)
• Other mounting options are available
upon request. Please contact ADC Technical
Assistance Center.
483 mm
(19.6")
49 mm Rack shown
as reference
(1.9")
106612AE
169 mm
FLUSH MOUNT (6.7")
13 mm
13 mm (5")
(5")
Ordering Information
•
Flush mount kit; allows 1", 2" or 4" recess mounting 1.75" (1 RU) FL2-FLMT0175
Kit includes: VCG and mounting flanges 3.5" (2 RU) FL2-FLMT0350
5.25" (3 RU) FL2-FLMT0525
Rear Guard Box Rack shown
(optional with some racks) 7"
for(4 RU)
reference FL2-FLMT0700
556 mm 8.75" (5 RU) FL2-FLMT0875
(21.9")
465 mm 10.5" (6 RU) FL2-FLMT1050
445 mm (18.3")
(17.5")
14" (8 RU) FL2-FLMT1400
17.5" (10 RU) FL2-FLMT1750
127 mm 127 mm
rd Mount (5") (5")
See ADC literature #103743AE.
ipped)
www.adc.com • +1-952-938-8080 • 1-800-366-3891 33
483 mm
Fiber Optic Panels
FL2000 Series Accessories – 19-Inch Rack Mount Installation Kits
556 mm
(21.9")
483 mm
(19")
465 mm
Next Gen Network Solutions
(18.3")
445 mm Rack Shown
(17.5")
For Reference
127 mm 74 mm 127 mm
(5") (2.9") (5")
19" Maximum
Mounting 258 mm
(10.1")
Inside Plant – Fiber Solutions
126 mm
(5")
Ordering Information
21.88"
6/09
(55.58 cm)
21.22"
20.28" (53.99 cm)
(51.5 cm)
3.02"
(76.7 mm)
ETSI Bracket
Mounting 127.0 mm 127.0 mm
(5.0") 4.85" (5.0")
(123.2 mm)
657 mm
Rear Guard Box (25.8")
546 mm
(optional with (21.5")
some racks) Rack shown
Next Gen Network Solutions
for reference
127 mm 127 mm
(5") (5")
Ordering Information
657 mm
(25.8")
Rear Guard Box 567 mm
Next Gen Network Solutions
127 mm 127 mm
(5") (5")
Inside Plant – Fiber Solutions
465 mm
(18.3")
Ordering Information
Features
Catalog Number
FL2 - 6P __ __ C 6 __ __ __
Fiber Type
B Multimode 62.5/125 µm
C Multimode 50/125 µm
106612AE
1
LC 6paks are loaded with 12-fiber pigtails
Catalog Number
FL2 - 6P __ S C 6 __ __ __
•
6/09
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• C
ompletely interchangeable between FL2000
panel, FL1000 rack and wall box products
Next Gen Network Solutions
• C
an be ordered with all standard types of
adapters and connectors 6pak Adapter
(Shown with Singlemode Simplex Adapters)
• F eature ADC‘s removable angled retainers
which provide superior fiber management
• N
o tools required to install into FL2000 and
FL1000 products
• C
an be ordered with adapters only or
Inside Plant – Fiber Solutions
6pak Adapter
(Shown with Multimode Simplex Adapters)
Ordering Information
Multimode
SC FL2-6PMMSC
FC FL2-6PMMFC
LC* FL2-6PMMLC
Singlemode
SC ultra polish FL2-6PSMSC
SC angled polish FL2-6PSMASC
FC ultra polish FL2-6PSMFC 6pak Adapter Blank
LC ultra polish* FL2-6PSMLC
LC angled polish* FL2-6PSMALC
6pak blank plug-in FL2-6PBLNK
106612AE
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Top
Side
Next Gen Network Solutions
Clear
Covers
Bottom Splice
Splice Wheel Side Deck
Splice Wheel
Splice Deck
Ordering Information
Splice wheel
Heat shrink (single fiber fusion) FST-DRS12-HS
Bare fusion FST-DRS12-FT
106612AE
Miscellaneous
Rubber
Grommets
Clamp
Bracket
Cover
Next Gen Network Solutions
Clamp
Yokes (2) Plate Nuts (2)
Locks
Cable Clamp Kit
Interbay Management Panel
E-501-L139
Inside Plant – Fiber Solutions
2.14 m
(7')
Blank VCG
FL2-BLNKFULL0875 Bonding/Grounding Kit
305 mm
64 mm
Ordering Information (12")
(2.5")
3.5" FL2-BLNKVCG0350
8.75" FL2-BLNKVCG0875
10.5" FL2-BLNKVCG1050
Blank VCG with blank panel for aesthetics
3.5" FL2-BLNKFULL0350
5.25" FL2-BLNKFULL0525
FL2-BLNKFULL0700 178 mm (7")
7"
FL2-BLNKFULL0875 Lower Cable Trough
8.75"
FL2-BLNKFULL1050 FL2-ACC012
10.5"
483/584 mm
Features (19/23")
305 mm
(12")
Ordering Information
Description Catalog Number
288-position termination/splice panels
Loaded with SC/UPC stranded pigtails (12-fiber softwall bundle) heat shrink splice FL1-288RP07-28820
trays, cable clamp; putty white
Loaded with SC/APC stranded pigtails (12-fiber softwall bundle) heat shrink splice FL1-288RP0J-28820
trays, cable clamp; putty white
Loaded with FC/UPC stranded pigtails (12-fiber softwall bundle) heat shrink splice FL1-288RP02-28820
trays, cable clamp; putty white
106612AE
Loaded with multimode SC stranded pigtails (12-fiber softwall bundle 62.5/125 µm) FL1-288RP09-28820
heat shrink splice trays, cable clamp; putty white
•
6/09
Features
• Basic cable management in an
economical solution
Next Gen Network Solutions
Catalog Number
FL1- N – 0
A B C D E
Panel Type
6 144-position 6pak Adapter/Connector Type
termination/splice (13 RU) (Reference placement of 6paks on
page 44)
Multimode
6pak Adapters and Pigtails N None/NA
3 Adapters with pigtails 9 SC
4 Adapter-only 6 LC1
6 Singlemode or multimode Singlemode
62.5/125 µm 6-fiber stranded N None/NA
softwall bundle (12-fiber for LC) 7 SC ultra polish
9 Singlemode or multimode J SC angled polish
62.5/125 µm 12-fiber ribbon 2 FC ultra polish
I Multimode 50/125 µm stranded 8 LC ultra polish1
106612AE
Cable clamp
6/09
Bonding/grounding kit
Radius limiters (set of 2)
1
LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Empty Panels
Features
• B
asic cable management in an economical
solution
Next Gen Network Solutions
Features
• Can be purchased and installed as growth necessitates
• Available with preterminated three- or five-meter pigtails
Next Gen Network Solutions
6pak Adapter
(Shown with SC Adapters and Pigtails)
Inside Plant – Fiber Solutions
Fiber Type
B Multimode 62.5/125 µm
C Multimode 50/125 µm
1
LC 6paks are loaded with 12-fiber pigtails
106612AE
2 FC ultra polish
8 LC ultra polish1
B LC angled polish1
1
LC 6paks are loaded with 12-fiber pigtails
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Fanning Panel
Designed to route optical cables left and right
from the front of the FOT to the FL1000 6paks.
Fanning Panel
Ordering Information FL1-FPL
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Multimode
SC FL2-6PMMSC
FC FL2-6PMMFC
LC* FL2-6PMMLC
Singlemode
SC ultra polish FL2-6PSMSC
SC angled polish FL2-6PSMASC
FC ultra polish FL2-6PSMFC
LC ultra polish* FL2-6PSMLC
LC angled polish* FL2-6PSMALC
Radius Limiter
6/09
Ordering Information
Description Catalog Number
Radius limiters; set of 2 for FL1-ACC002
use with rack mount panels
Product Overview
Recommended Ideal for small to medium fiber counts within communication closets or
Applications demarcation points
Description One or two door wall box solution offering excellent fiber protection and
technician-friendly cable routing. Termination, termination/splice or splice-only
boxes available
Number of fibers, 12, 24, 48, 72
future growth
potential
Flexibility/ Modular growth design
ability to grow
Demarcation Yes
Accommodates Yes. Built-in
in box splicing
Accommodates Yes. IFC cable and assembly available
out of box splicing
106612AE
All-front-access Yes
Customer premises Ideal
application
Wall mount Yes
VAM capabilites No
Optimum jumper Slack storage built-in
storage location
•
6/09
Features
• Numerous cable tie points within the boxes
Next Gen Network Solutions
91 mm
(3.6")
330 mm
(13")
259 mm
(10.2")
91 mm
(3.6")
106612AE
356 mm
(14")
381 mm
(15")
•
6/09
Catalog Number
FL1- __ __ __ __ __ __ N N __ - __ __ __ 0
A B C D
3
LC connectors and adapters double the
capacity of the panel by terminating
6/09
For FTTX wall box applications, please refer to the OmniReach® FTTX Solutions for Multi-Dwelling Unit
Applications Catalog #102761AE.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Features
• Uses 6pak adapters with angled retainers
Next Gen Network Solutions
• M
ultiple, configurable locking options that allow users
and service providers separate access for security
• Acceptance of strength member tie-off hardware
• Acceptance of cable clamps at each corner
• Grounding
screws, mounting screws and dust caps are
included with each panel. Additional accessories
are available on page 55-56.
Wall Box
330 mm
(13")
381 mm
(15")
106612AE
97 mm
(3.8")
•
6/09
Catalog Number
FL1- __ __ __ __ __ __ __ __ - __ __ __ __ __
A B C D E
1
se the guides on the next page for placement of 6paks. Place the desired connector or adapter type above the
U
corresponding location designation of A, B, C, D or E. The diagram on the following page illustrates the location
6/09
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
24-Position
Wall Mount
12-Position
Wall Mount Door Side C A
Next Gen Network Solutions
Door Side
B A Wall Mount Side
Wall Mount Side
(Rear of Box)
(Rear of Box) C B
TypeType
G Box Viewed
G Box Type Type
H BoxHViewed
Box
(Viewed from Side ofSide
from Equipment Box) (Viewed from Side of
from Equipment Box)
Side
Door Side E D C A
Wall Mount Side
(Rear of Box)
E D C B
TypeType
J BoxJ Viewed
Box
(Viewed from Side of
from Equipment Box)
Side
72-Position
Wall Mount
D D B A
106612AE
D D C B
Door Side
•
TypeType
P BoxP Viewed
Box
from Equipment
(Viewed Side
from Side of Box)
6/09
Note: All configured wall boxes will have adapter packs loaded starting from the wall side.
Wall Mount Boxes (One Door or Two Door) with Multifiber Cable
How to order:
Catalog Number
F L 1 - __ __ / __ __ ____ __ - __ __ __ __
A B
J SC angled polish
092 92 m (300')
2 FC ultra polish
122 122 m (400')
8 LC ultra polish1
153 153 m (500')
Z LC angled polish1
Entrance Point
Cable Size
1 Bottom left
1 12
2 Top left
2 24
•
4 48
7 72 Cable Type
6/09
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
279 mm 381 mm
(11") (15")
86 mm 91 mm
(3.4") (3.6")
Ordering Information
Description Catalog Number
Empty termination/splice chassis
12-position FL1-A
24-position FL1-B
Empty splice-only chassis
48-position FL1-C
106612AE
•
6/09
All empty chassis’ use ADC FL1000 and FL2000 6pak adapters.
361 mm 437 mm
(14.2") (17.2")
Next Gen Network Solutions
452 mm
381 mm (17.8")
(15")
158 mm
99 mm (6.2")
Inside Plant – Fiber Solutions
(3.9")
483 mm
(19")
546 mm
(21.5")
152 mm
(6")
72-Position Termination/Splice
Two Door Wall Box
FL1-P
106612AE
Ordering Information
Description Catalog Number
Empty termination/splice chassis
12-position FL1-G
24-position FL1-H
48-position FL1-J
72-position FL1-P
Empty splice-only chassis
•
144-position FL1-Q
6/09
Features
FL2 - 6P __ __ C 6 __ __ __
Fiber Type
B Multimode 62.5/125 µm
C Multimode 50/125 µm
1
LC 6paks are loaded with 12-fiber pigtails.
106612AE
FL2 - 6P __ S C 6 __ __ __
•
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Miscellaneous
6pak Adapter-Only
(Without Fiber)
Ordering Information
Next Gen Network Solutions
SC FL2-6PMMSC
FC FL2-6PMMFC
LC FL2-6PMMLC
Singlemode 6pak adapter-only2
Inside Plant – Fiber Solutions
columns on the left and right sides of the frame as shown in the figure below. The frame provides
sufficient vertical trough space for the highest termination density applications and 2.14
includes
(7')
m built-in
jumper storage that will store up to 3.5 meters of jumper slack. The NGF is designed such that only a
single jumper length (6 meters) is required to go between any two termination points within a frame.
2.14 m
(7')
FTB
Mounting
Position
2.14 m (12)
(7')
762 mm (30")
483 mm 483 mm
(19") (19")
483 mm 483 mm
Ordering Information (19") (19")
610 mm (24")
trough space for the highest termination density applications and includes built-in jumper storage that
will store up to 3.5 meters of jumper slack.
2.14 m
(7')
FTB
Mounting
Position
(12) 2.14 m
(7')
Front
Horizontal
Trough
762 mm (30")
Maximum
762 mm (30")
Description Dimensions (HxWxD) Termination Capacity Catalog Number
NGF front facing 2.14 m x 762 mm x 483 mm610 mm (24") 1,728 NGF-F3MDF7A100-30
fiber main (7' x 30" x 19") (2,304 using LC connectors)
distributing frame
483 mm 483 mm
Each frame section includes heavy duty floor anchor bolts for concrete floor applications.
(19") (19")
•
6/09
610 mm (24")
When ordering FTBs for the slim rack, note that only LEFT oriented blocks are used on this frame.
2.14 m 2.14 m
(7') (7')
FTB
Mounting
Position
Jumper
Storage
Panel
483 mm 483 mm
483 mm 483 mm
(19") (19")(19") (19")
Maximum
Description Dimensions (HxWxD) Termination Capacity Catalog Number
NGF fiber slim rack 2.14 m x 483 mm x 483 mm 864 NGF-SLM7A100
(7' x 19" x 19") 483 mm
(1,152 using LC connectors) 483 mm
(19") (19")
Each frame section includes heavy duty anchor bolts for concrete floor applications.
Not rated for zone 4 applications.
610 mm (24")
•
6/09
Definition of Variables
Block Type
1 General adapter type required in the FTB
Block Capacity
2 Maximum number of terminations that the FTB will accommodate when fully loaded
Block Orientation
3 Vertical column of the frame the FTB is to be mounted on
Connector Type #2
6 Specific connector type required at the far end opposite the FTB
Cable Type
7 Type of cable to be terminated to the FTB
Cable Length
8 Required length of the cable terminated to the FTB
•
Catalog Number
NGF-TB __ __ __ __ __ __ __ __ __ __ __
Next Gen Network Solutions
1 Block Type
1 SC 8 Cable Length
2 FC Standard Single-Ended
4 LC 016 16 m (50')
023 23 m (75')
2 Block Capacity 031 31 m (100')
B 72 046 46 m (150')
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Definition of Variables
1 Block Capacity Maximum number of terminations that the FTB will accommodate when fully loaded
3 Front Connector and Adapter Type Specific adapter/connector type required at the FTB
Catalog Number
NGF-MP __ __ 0 __ __ __
2 FC ultra polish
K LC ultra polish (144 or 192 only)
M LC angled polish (144 or 192 only)
Multimode
9 SC
P LC (144 or 192 only)
For multimode cable options, refer to the TrueNet Solutions literature# 102094AE.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Definition of Variables
2 Block Capacity Maximum number of terminations that the FTB will accommodate when fully loaded
4 Cable Exit Direction Direction the equipment jumpers or OSP cable will exit from the FTB
Catalog Number
NGF-TB __ __ __ __ __
106612AE
1 Block Type
1 SC 5 Adapter Type
2 FC Singlemode
4 LC 7 SC ultra polish
3 Block Orientation
L SC angled polish
L Left
2 Block Capacity 2 FC ultra polish
B 72 R Right
K LC ultra polish
C 96 4 Cable Exit Direction (144 or 192 only)
•
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Cable
Clamp
Ordering Information
Definition of Variables
2 Block Capacity Maximum number of terminations that the FCB will accommodate when fully loaded
Next Gen Network Solutions
4 Connector and Adapter Type Specific adapter/connector type required in the FCB
Catalog Number
NGF-CB __ __ __ 2 __ __ __ __ __
1 Block Type
1 SC
2 FC 7 Splice Chip
2 Heat shrink
4 LC
(single fiber fusion)
M LC angled polish
R Right (144 and 192 only)
Multimode 5 Pigtail Type
(62.5/125 µm) 1 12-fiber stranded
9 SC 5 12-fiber ribbon
P LC
(144 or 192 only)
•
1
192 and 144 blocks using block style 1 or 2 cannot be used in legacy 26" wide NGF frames.
6/09
2
Must use Nortel QPAK splice chip in 144 and 192 blocks when splicing 24 single fibers.
3
Due to space limitations, do not use Tracerlight® patch cords in the 192 block.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Splice Tray
For use when splice trays are not included with block at time of order.
Catalog Number
FST-DRS __ __ - __ __
Next Gen Network Solutions
Hot Melt
40 mm (0.16")
(0.16")
maximum
Ordering Information
6/09
4 mm
(0.16")
Description Catalog Number
Splice protector sleeve for;
Single fiber – single fusion; 60 mm (2.4") length, 1 each FST-ACC001
Single fiber – single fusion; 40 mm (1.6") length, 1 each FST-ACC005
12-fiber ribbon – mass fusion – heat shrink; 40 mm (1.6") length, 1 each FST-ACC006
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
are available in two different configurations depending on the way the NGF frame system is zoned.
NGF frames can be zoned by vertical or by frame. A 12-inch wide panel is available that serves two
verticals (one on each side) for use when frames are zoned by vertical. Also, 8-inch wide versions are
available that serve a single vertical (left or right) for use when frames are zoned by frame.
Cover
Inside Plant – Fiber Solutions
Radius
Limiter
(14)
2.14 m
(7')
106612AE
(NGF-ACCFOTSB Shown)
6/09
End Guard
End guards provide protection for the fibers
entering and exiting frames at the end of a
lineup. They are designed for universal fit to be
used on either end of the lineup.
Next Gen Network Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
FMDF end guard 2.14 m x 127 mm x 610 mm NGF-ACCEGD007
(7' x 5" x 24")
Front facing F3MDF end guard 2.14 m x 127 mm x 483 mm NGF-F3ACCEGD007
(7' x 5" x 19")
Inside Plant – Fiber Solutions
Work Shelf
The work shelf can mount at any one of six positions
within the 30-inch NGF frame and anywhere along
the height of the frame. It provides a surface for
miscellaneous objects (i.e. isopropyl alcohol, tissues
and cotton swabs for cleaning connectors); also
provides a writing surface; or serves as an aid in field
terminating cables and jumpers.
Ordering Information
Description Catalog Number
Work shelf; 762 mm (30") NGF-ACCSHELF1-30
106612AE
•
6/09
Frame Extender
Frame extenders are used to extend the height of a 7-foot frame to the appropriate ceiling height so
that it can be secured overhead.
Ordering Information
Next Gen Network Solutions
Ordering Information
106612AE
AC Outlet Kit
The AC outlet kit provides the hardware for mounting AC power outlets on the frame. Each kit
•
includes a prewired AC power outlet strip that mounts at the bottom of the frame.
6/09
Ordering Information
Description Catalog Number
Dual outlet; mounts in base of NGF ACOK-2
AC outlet cover kit RAC-0X0493
Installation Kit
Frame installation kits may be used on network frames and are seismic zone 4 rated.
Ordering Information
Description Catalog Number
Frame installation kit for;
Computer floor FDF-ACC146
Overhead support RINST-TOP7
Isolation Pad
A template for frame installation providing isolation between the frame and the ground.
106612AE
Ordering Information
Description Catalog Number
Isolation pad for;
NGF FMDF and equipment frames NGF-ACCISOP30X24
NGF front facing F3MDF and equipment frames NGF-ACCISOP30X19
NGF slim racks NGF-ACCISOP19X19
•
Ordering Information
Description Catalog Number
Cable clamp kit for FOT patch cords (included with fiber termination blocks NGF-ACCCLMP04
loaded with adapters only)
Cable clamp kit* for IFC/OSP cables, dielectric cable without grounding NGF-ACCCLMP08
hardware (included with fiber termination blocks with IFC)
* One NGF-ACCCLMP08 is also included with each cable clamp kit and block conversion kit.
106612AE
•
6/09
Catalog Number
NGF-SAP __ 0 __ 00
Multimode
6/09
9 SC
P LC
Approximate
Total Number of
Patch Cord Length
Sections Traversed*
Meters (Feet)
Same frame
Next Gen Network Solutions
6 m (18')
Adjacent frames 7 m (23')
3 to 4 8 m (26')
5 to 6 10 m (33')
7 to 8 11 m (36')
9 to 10 12 m (39')
39 8 39
35 7 35
Inside Plant – Fiber Solutions
30 6
30
5
25 25
4
20 20
2.14 m (7') 3
15 2 15
(12) Cable
10 1 Tie Brackets 10
(Included)
51 mm (2")
Horizontal 356 mm (14")
Cable 5 5
Trough
1 51 mm (2") 1
114 mm (4.5") Guard Box
660 mm 127 mm (5") 657 mm
(26") 127 mm (5") 64 mm (26")
127 mm (5") 127 mm (5")
(2.5")
Ordering Information
106612AE
For existing lineups with 6", 8" or 16" lower cable troughs, contact ADC Technical Assistance Center.
1
L egacy front load panels and accessories remain available. Please contact ADC Technical Assistance Center for
ordering information.
2
Interbay management panels and end guards shown are for reference only. They are ordered separately.
Catalog Number
__ FCM- __ __ / __ __ __ __ __
Multimode
0 No connector/stub end
9 SC
P LC (144 only)
1
L egacy front load panels and accessories remain available. Please contact ADC Technical Assistance Center for
ordering information.
2
P anels using ADC’s standard cable offering have a shorter lead time than panels using a specific cable
manufacturer. ADC only provides GR-409 compliant cable that meets or exceeds our high quality standards.
Standard cable offerings include Alcatel, Corning, Berk-Tek, Sumitomo and Prysmian.
3
Standard cable exit direction is upward.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
See ADC literature #103742AE.
Ordering Information
Singlemode
SC ultra polish Vertically FCM-Z70000
SC angled polish Vertically FCM-ZL0000
LC ultra polish (72 duplex LC) Vertically FCM-TK0000
144
LC angled polish (72 duplex LC) Vertically FCM-TM0000
Multimode
SC Vertically MFCM-Z90000
•
*Legacy front load panels and accessories remain available. Please contact ADC Technical Assistance Center for
ordering information.
Splice Panels
Splice panels for rear load* frames include
8-inch rear doors and rear cable management.
The eight splice drawers provide protective
enclosure for mounting splice trays and coiling
of the service loop, which is required for off-
Next Gen Network Solutions
Splice Panel
(E-501-L18 Shown)
106612AE
Splice Panel
Loaded with Pigtails
(Top View)
Ordering Information
*Legacy front load panels and accessories remain available. Please contact ADC Technical Assistance Center for
ordering information.
Ordering Information
For existing lineups with 6", 8" or 16" lower cable troughs, call ADC Technical Assistance Center.
•
6/09
End Guard
106612AE
End guards provide protection and a finished appearance at the start and end
of frame lineups. They attach to either a frame or an interbay management 305 mm
panel. End guards serve as a mounting place for outlets and switches and are (12")
64 mm
used interchangeable for either left or right applications. (2.5")
End Guard
Ordering Information
•
218 mm 81 mm
(8.6") (3.2")
124 mm
(4.9") 78 mm
(3.1")
Next Gen Network Solutions
100 mm
(3.9")
99 mm (3.9")
Rear Access Underfloor Guard Box Front/Rear Access Underfloor Guard Box
Inside Plant – Fiber Solutions
Ordering Information
Rear access only. Used for routing OSP or IFC 100 mm x 125 mm x 125 mm FDF-ACC139
cable or patch cords from under floor to the rear (3.9" x 4.9" x 4.9")
of the frame.
Front and rear access. Used for routing OSP, IFC 179 mm x 218 mm x 127 mm FDF-ACC152
or patch cords from under floor to the rear of the (7.1" x 8.6" x 5")
frame and patch cords from under floor to the
front of the frame.
•
6/09
Ordering Information
Description Catalog Number
Next Gen Network Solutions
Ordering Information
Description Catalog Number
6/09
2.14 m
(7')
Ordering Information
Description Catalog Number
Frame filler plates; putty white, with guard box
2.14 m x 127 mm x 305 mm (7' H x 5" W x 12" D) 7RFP-5NPW
Inside Plant – Fiber Solutions
33 mm (1.3")
W End View
GN Cap Fitted
Hole for Prewired 3-Wire
AC Supply Duplex Receptacle
106612AE
AC Outlet Kit
Ordering Information
Description Catalog Number
AC outlet kit ACOK-PWNB
AC raceway
•
656 mm (25.8") – used for frames which do not require AC power ACB-PWNB
6/09
127 mm (5") – used with AC outlet kit when frames are spaced 127 mm (5") AC-PWNB-RS5*
* This raceway must be ordered with each interbay management panel when an AC outlet is ordered.
Grounding Kit
The fiber distribution frame is equipped with a grounding kit designed with mechanical (clamps,
straps, connectors) fittings. Order this kit only if you are building a frame using your own frame. When
connecting frame ground to office ground conductor, an H-TAP bonding kit should also be ordered.
2 Hole Lug
Next Gen Network Solutions
H-TAP
#6 AWG
Stranded Wire
610 mm x 13 mm
(12.2" x 1/2") Screw
Copper Wire Tinned
Central Office Crimp Lug
Ground
Split bolt connector
(included with E-501-L40
Cable Clamp Kit)
GAK Bracket
Wire Clip
Fiber Frame
(Rear) 610 mm x 13 mm
(120.2" x 1/2") Screw
Ordering Information
Grounding kit includes:
2 hole terminal lug 1 each Description Catalog Number
#6 AWG copper tinned wire 13' Grounding kit E-501-L37*
Wire clips 8 each
#12-24 x 1/2" screws 10 each H-TAP bonding kit E-501-L166
H-TAP bonding kit includes: GAK grounding kit GAK
106612AE
H-TAP 1 each
H-TAP insulated cover 1 each * Included with ADC’s 8-inch FCM fiber frame
2 hole terminal lug, crimp 3 each
Terminal lug, screw 4 each
#6 AWG stranded insulated wire 2'
Star washer 6 each
No-ox grease 1 tube
GAK grounding kit includes:
Bracket 1 each
Clamping bolt 2 each
•
Nut 2 each
Screw 10 each
6/09
Ordering Information
Next Gen Network Solutions
Blank Panel
Inside Plant – Fiber Solutions
The blank panel occupies one panel space in either a front load or rear load frame.
Ordering Information
Description Catalog Number
Blank panel, 203 mm (8") H E-501-L39
OSP Cable
Cable Plate Grommet
Cable Clamp Cover Existing Rear
10-32 Nut Cable Management
Nuts (4)
Plate
Yoke
106612AE
Grommet Clamp
Cable Cover
Cable Cover Cover
Plate
6.32" x .25"
6.32" x 0.375" Screws
Clamp Bracket Screws
Cable Plate Mounting
Clamp Clamp
Bracket
Ordering Information
6/09
ribbon fibers.
Hot Melt
3.6 mm
(0.14")
Mass Fusion Splice Protector Sleeve
1.7 mm Single Fusion Splice Protector Sleeve
•
maximum
(0.07")
4 mm (FST-ACC006 Shown) (FST-ACC001 Shown)
3.8 mm (0.15")
6/09
(0.16")
Ordering Information
Description Catalog Number
Splice protector sleeve for
Single fiber – single fusion; 60 mm (2.4") length, 1 each FST-ACC001
Single fiber – single fusion; 40 mm (1.6") length, 1 each FST-ACC005
12-fiber ribbon – mass fusion – heat shrink; 40 mm (1.6") length, 1 each FST-ACC006
2 6 m (19.7')
3 6 m (19.7')
4 7 m (23')
5 8 m (26.2')
6 9 m (29.5')
39
35
30
Next Gen Network Solutions
25
20
2.1 m (7')
Cable Tie
15 Brackets
10
1
2" Bumper GB
203 mm
660 mm (8")
(26") 381 mm
3.4 m (11')
(15")
ADC’s recommended fiber frame lineup uses four frames with 2 mm fiber
jumpers to maintain the industry standard 2-inch patch cord pile-up
The preterminated LSX-288 solution utilizes a traditional frame designed to fit a variety of termination,
splice and storage applications. This front load frame is built to ensure commonality with patch cord
routing, slack storage and fiber protection. It is shipped complete with top and bottom troughs.
Available accessories include interbay management panels (IMPs).
Density Recommendations
Panels/Frame Terminations/Frame Recommended Maximum Frame Lineup
5 1,440 4 frames (5,760 terminations)
Ordering Information
•
High-Density Frame (includes 8" deep front troughs) 2.1 m x 660 mm x 381 mm E-501-LGX-HD
(7' x 26" x 15")
Interbay Management Panel (includes 8" deep 2.1 m x 127 mm x 381 mm E-501-L139-HD
troughs and spools) (7' x 5" x 15")
288-Termination-Only Distribution Panel 279 mm x 584 mm x 305 mm Refer to page XX
(11" x 23" x 12")
End Guard 2.1 m x 64 mm x 381 mm RAC-7B0162
(7' x 2.5" x 15")
39
35
Next Gen Network Solutions
30
25
20
2.1 m (7')
Cable Tie
Brackets
15
10
Inside Plant – Fiber Solutions
1
5" Guard Box
ADC’s recommended fiber frame lineup uses four frames with 2 mm fiber
jumpers to maintain the industry standard 2-inch patch cord pile-up
The termination and splice LSX-288 solution utilizes a traditional frame designed to fit a variety of
termination, splice and storage applications. This front load frame is built to ensure commonality with
patch cord routing, slack storage and fiber protection. It is shipped complete with top and bottom
troughs. Available accessories include interbay management panels (IMPs).
Ordering Information
Description Dimensions (H x W x D) Catalog Number
High-Density Frame (includes 8" deep front troughs) 2.1 m x 660 mm x 381 mm E-501-LGX-HD
(7' x 26" x 15")
106612AE
Parking Lot
288-Termination
Panels
Ordering Information
Description Dimensions (H x W x D) Catalog Number
Network Rack with 2" WECO mounting spaces 2.14 m x 660 mm x 381 mm RAC-7A0501
(shipped with 8-inch front guard box) (7' x 26" x 15")
Frame Rear Guard Box*; (rear 2-inch bumper should 660 mm x 127 mm RAC-0X0439
be removed and replaced with this item) (26" x 5")
Interbay Management Panel 2.1 m x 127 mm x 381 mm E-501-L139-HD
106612AE
2.14 m
(7')
305 mm
(12") 64 mm
(2.5")
E-501-LGX
(Includes Cable Rings) E-501-L139-A UEGP-7PW
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Traditional LSX universal frame; Putty white 2.14 m x 584 mm x 305 mm E-501-LGX
(7' x 23" x 12")
Interbay management panel (IMP) 2.14 m x 127 mm x 305 mm E-501-L139-A
(7' x 5" x 12")
106612AE
Catalog Number
046 46 m (150')
LSX- __ __ / __ __ __ __ __ 061 61 m (200')
077 77 m (250')
Panel Type 092 92 m (300')
1 12-position (1.75" H) 122 122 m (400')
1 24-position (1.75" H) 153 153 m (500')
2 48-position (3.5" H) Non-Standard
P LC HJ 48-fiber stranded
6/09
1
P anels using ADC’s standard cable offering have a HM 48-fiber ribbon
shorter lead time than panels using a specific cable T5 72-fiber stranded
manufacturer. ADC only provides GR-409 compliant GE 72-fiber ribbon
cable that meets or exceeds our high quality standards.
T6 96-fiber stranded
House cable vendors include Alcatel, Corning and Pirelli.
GA 96-fiber ribbon
2
Standard cable exit direcction is upward.
T7 144-fiber stranded
3
LC does not double the density of the LSX panel.
GT 144-fiber ribbon
4
All OSP cables are dielectric.
WD 288-fiber stranded
Other configurations are available upon request. Please WC 288-fiber ribbon
contact ADC Technical Assistance Center.
Ordering Information
Number of Terminations Adapter Type Catalog Number
152 mm
Next Gen Network Solutions
12 Singlemode (6")
44 mm (1.75") SC ultra polish LSX-170000-12
height 102 mm 127 mm
SC angled polish LSX-1L0000-12 (4") (5")
24 Singlemode
44 mm (1.75") 563 mm (22.3")
SC ultra polish LSX-170000 (23" Rack Mount) 461 mm (18.2")
height (19" Rack Mount) 178 mm (7")
SC angled polish LSX-1L0000
FC ultra polish LSX-120000 25 mm (1")
51 mm (2")
Multimode
25 mm (1")
SC LSX-190000
48 Singlemode
89 mm (3.5") 72- or 96-Position Panel
SC ultra polish LSX-270000 (Front View)
height
SC angled polish LSX-2L0000
FC ultra polish LSX-220000
563 mm (22.2")
Multimode (23" Rack Mount)
460 mm (18.1")
SC LSX-290000 (19" Rack Mount)
72 Singlemode
178 mm (7") SC ultra polish LSX-670000 223 mm (9")
height 25 mm (1")
SC angled polish LSX-6L0000
51 mm (2")
FC ultra polish LSX-620000 25 mm (1")
106612AE
Multimode
SC LSX-690000
144-Position Panel
96 Singlemode
(Front View)
178 mm (7") SC ultra polish LSX-770000
height
SC angled polish LSX-7L0000
FC ultra polish LSX-720000
Multimode
•
SC LSX-790000
6/09
144 Singlemode
228 mm (9") SC ultra polish LSX-T70000
height
SC angled polish LSX-TL0000
FC ultra polish LSX-T20000
LC ultra polish LSX-TK0000
LC angled polish LSX-TM0000
Multimode
SC LSX-T90000
LC LSX-TP0000
See ADC literature #103742AE.
Ordering Information
Loaded with Loaded with
12-Fiber 12-Fiber
Multimode 62.5/125 µm
6/09
SC N/A LSX-691062-A-SPL
96 Singlemode
178 mm (7") height SC ultra polish LSX-775093-A-SPL LSX-771092-A-SPL
15" deep
SC angled polish LSX-7L5093-A-SPL LSX-7L1092-A-SPL
FC ultra polish LSX-725093-A-SPL LSX-721092-A-SPL
Multimode 62.5/125 µm
SC N/A LSX-791092-A-SPL
Continued on next page.
SC N/A N/A
LC N/A LSX-TP1122-A-SPL
288* Singlemode
279 mm (11") height SC ultra polish LSX-L75243-A-SPL LSX-L71242-A-SPL
15" deep
SC angled polish LSX-LL5243-A-SPL LSX-LL1242-A-SPL
LC ultra polish LSX-LK25243-A-SPL LSX-LK1242-A-SPL
LC angled polish LSX-LM5243-A-SPL LSX-LM1242-A-SPL
Multimode 62.5/125 µm
SC N/A LSX-L91242-A-SPL
LC N/A LSX-LP1242-A-SPL
*288 Termination/splice panel does not fit 19-inch frames. For 23-inch frames only.
106612AE
•
6/09
Splice Panels
The LSX splice panel has the same mounting
dimensions as LGX® compatible panels and
consists of six drawers, designation labels and 178 mm (7")
Ordering Information
Ordering Information
Description Catalog Number
Next Gen Network Solutions
33 mm (1.3")
W End View
GN Cap Fitted
Hole for Prewired 3-Wire
AC Supply Duplex Receptacle
Access IG Series (2 Pls.) AC Outlet Kit
Splice Tray
Each splice tray is purchased separately.
Ordering Information
Ordering Information
ADC offers a comprehensive line of cable assembly and accessory products including patch cords, IFC
assemblies, attenuators, FasTerm® connectors and adapters to meet the demanding needs of today’s
network. Please refer to the Fiber Cable Assemblies Catalog #102880AE at www.adc.com for more
detailed information.
300 mm
(11.8")
600 mm
(23.6") 300 mm
(11.8")
106612AE
Ordering Information
Please contact ADC Technical Assistance Center to order a preconfigured OMX600 frame.
•
6/09
Catalog Number
MX6-PM __ __ __ __ __ __ 0
Connector/Adapter Type
Pigtail Type
Singlemode
1 12-fiber stranded
7 SC ultra polish
3 12-fiber ribbon
L SC angled polish
2 FC ultra polish Block Orientation
106612AE
9 SC WM 96-fiber stranded
P LC2 GH 144-fiber stranded
Block Orientation 1
P anels using ADC‘s standard cable offering have a shorter
L Left lead time than panels using a specific cable manufacturer.
ADC only provides GR-409 compliant cable that meets or
R Right
exceeds our high quality standards.
2
LC does not double the density of the OMX panel.
3
Standard cable direction is upward.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
72-Position Adapter-Only
Fiber Termination Panel
Catalog Number
MX6-TM __ __ __ 00
2 FC ultra polish
K LC ultra polish (144 only)1
M LC angled polish (144 only)1
Multimode (62.5/125 µm)
9 SC
P LC (144 only)1
1
LC does not double the density of the OMX panel.
•
6/09
Splice Panels
The OMX600® splice panel provides mounting
positions and protection for 24 splice trays. The
splice panel is the height of two termination panels
(30"). The module may be ordered with a ”left“
orientation (mounts on the left side of the frame)
Next Gen Network Solutions
Ordering Information
Ordering Information
Ordering Information
Ordering Information
(4) M8 nuts
(8) flat washers
(4) lock washers
shims and anchor plates
Raised floor frame installation kit, includes: RAC-MX0615
(4) threaded rods M12 x 1 m (3.28")
(12) heavy nuts, lock and flat washers
(4) nuts with springs, M12
(2) 1.8 m (5.9") unistrut
(1) anchor kit
•
End Guard
6/09
The OMX600 end guard provides protection for the fibers entering and exiting frames at the ends
of a lineup. The end guard attaches directly to the frame, but does not add to the overall frame width.
End guards are not required when ordering splice frames.
Ordering Information
Splice Cabinet
The OMX600® splice cabinet is a zone 4 rated, high-density splice solution, housing up to 1,440
splices within a 23.6- by 11.8-inch footprint. Shipped complete with the necessary cable management,
it features slots which secure and protect the round splice trays and can hold up to sixty 12-fiber
splice trays on each vertical. The cabinet is shipped with lockable front doors and may be ordered for
applications in which the cables enter from above or below.
Next Gen Network Solutions
305 mm (12")
610 mm
(24")
Ordering Information
Splice Tray
The round splice tray used in the OMX600® simplifies
installation and maintenance. The tray stores up to
9.8-feet of slack allowing the installer to roll the tray
away from the frame to perform splicing.
Next Gen Network Solutions
Catalog Number
16 FT Bare fusion
24 HS Heat shrink (single fiber fusion)
321 MT Mechanical (mass fusion)
1
For 8-fiber ribbon only
Cable Clamp
The OMX600 cable clamp is used to secure the OSP/IFC cable to the base or top of the frame in
a non-splice frame.
Ordering Information
Approximate
Number of Frames Patch Cord Length
Meters (Feet)
1 6 m (19.7')
2 7 m (23')
3 7 m (23')
4 8 m (26.2')
5 8 m (26.2')
•
6 9 m (29.5')
6/09
For recommended cross-connect methods and installation instructions, refer to OMX600® user manual ADCP-93-084.
381 mm 660 mm
(15") 541 mm (26")
(21.3")
198 mm
356 mm (7.8")
(14") 406 mm
356 mm (16") 813 mm
(14") 406 mm (32")
(16") 813 mm
(32") 914 mm
(36")
Next Gen Network Solutions
711 mm
495 mm (28")
(19.5")
330 mm 330 mm
(13") (13")
1.57 m
(62")
1.14 m
(45")
330 mm 330 mm
(13") (13")
576-Position 864-Position
• Equipped with 24 drawers • Equipped with 36 drawers
• 576 stranded fiber capacity • 864 stranded fiber capacity
106612AE
Ordering Information
Number of
Cabinet Size drawers
Stranded Ribbon included with Dimensions
Fibers Fibers cabinet Weight (HxWxD) Catalog Number
40 lbs 495 mm x 813 mm x 330 mm FEC-144
•
144 432 6
(18.18 kg) (19.5" x 32" x 13")
6/09
Ordering Information
Splice Tray
Standard-style FEC cabinets will accept two single trays or one dual tray per drawer. 24 stranded fibers
maximum per drawer, 72 ribbon fibers maximum per drawer.
Ordering Information
Catalog Number
Per Subunit1
01
02
Number of Subunits
03 Containing Fiber
04
01
05
02
06
03 1-6 ribbons may be placed in each protective tube
04 Protective tubing length = 5 meters
•
05
6/09
06
1
The number of protective tubes per subunit is calculated as follows:
ivide the number of fibers per subunit (typically 72 or 144) by the number of fibers (12, 24, 36, 48, 72)
D
to be spliced in each splice tray.
E xample: If each subunit has 144 fibers with 36 fibers per tray, then each subunit would require
four protective tubes.
To order protective tubing cutting tool, see page 116. For installation instructions, refer to user manual ADCP-93-305.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Radial
Central
24 fibers per ribbon. Each cable consists of a single Tube
Strength
Members
central tube that encloses the ribbons.
Breakout kits for RCT cables contain a single Figure 1
Figure 1: Ribbon Central Tube (RCT) OSP
breakout base attached to the central tube. Protective Ribbon central tube (RCT)
cable construction
tubing is attached to the breakout base in 5-meter OSP cable construction
lengths (see Figure 2). Smaller protective tubing can
accommodate up to six ribbons featuring 12 fibers
Inside Plant – Fiber Solutions
OSP cable
Hole plug
Breakout base
36
106612AE
2
#1
4
#2
6
#3 Central tube
Figure 2
Breakout kit for RCT cable Breakout base
•
Figure
Figure 3: Breakout 3 RCT cable
kit for
Breakout kit for RCT cable
Number of Number of Ribbons per 432-Fiber Central Tube OSP 864-Fiber Central Tube OSP
Fibers per Tray Protective Tube Cable, 24-Fiber Ribbon Cable, 24-Fiber Ribbon
24 1 18 36
48 2 9 18
72 3 6 12
96 4 N/A 9
144 6 3 6
Catalog Number
BLK-RCT - ____ ____ ____ 0
Ribbon Type
A < /= 12-fiber
B 24-fiber
Number of
Protective Tubes Central Tube Number of Fibers
per Breakout Base1 Outside Diameter Fiber Count per Ribbon
01 B 5 mm – 8 mm 12-96 12
02 (0.2" – 0.33")
Refer to 03 C 8 mm – 11 mm 108-216 12
Figure 3 (0.33" – 0.43")
04
106612AE
1
The number of protective tubes per central tube is calculated as follows:
ivide the number of fibers per central tube (typically between 144 and 864) by the number of fibers (12, 24, 36,
D
48, 72) to be spliced in each splice tray.
Example: If the central tube has 864 fibers with 36 fibers per splice tray, then the breakout base would require
24 protective tubes.
For installation instructions, refer to user manual ADCP-93-305. Page 12, figure 10.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
Ordering Information
IFC Cable Fiber Count Number of Fibers per Tray Catalog Number
106612AE
72 36 BLK-RIFC-A02B0
72 72 BLK-RIFC-A01B0
96 48 BLK-RIFC-A02B0
144 36 BLK-RIFC-A04C0
144 72 BLK-RIFC-A02C0
216 36 BLK-RIFC-A06C0
216 72 BLK-RIFC-A03C0
•
432 72 BLK-RIFC-A06E0
6/09
Catalog Number
Number of
Protective Tubes
per Breakout Base1, 2
1
–6 ribbons may be placed in each protective tube ADC recommends 6 ribbon units (72 fibers) per tube.
1
Protective tubing length = 5 meters
2
The number of protective tubes per central tube is calculated as follows:
Divide the number of fibers per central tube (typically between 72 and 216) by the number of fibers
(12, 24, 36, 48, 72) to be spliced in each splice tray.
Example: If the central tube has 144 fibers with 36 fibers per splice tray, then the breakout base would
require four protective tubes.
Ordering Information
Next Gen Network Solutions
Grounding Kit
Kit used to ground armored fiber cable.
Inside Plant – Fiber Solutions
Set Screws
Ordering Information Cable Assembly Lug
10-24 Screw
Description Catalog Number
#6 Ground Cable
Grounding Kit
(GND-STPKIT Shown)
•
6/09
the splice fusion is complete and shrunk into place. They are
available in either single fiber or mass fusion sleeves.
Ordering Information
Ordering Information
The 7-inch standard VAM chassis fits into any open chassis
location within an existing ADC 7-inch panel system or in an
LGX® compatible frame. It accommodates a maximum of 12
single plug-in modules, 12 bulkhead plates, 12 blank panels
or any combination thereof. Adjustable mounting brackets are
provided for 19- or 23-inch rack mounting environments. The
7-inch chassis mounts in EIA or WECO racks. Not for use in
Inside Plant – Fiber Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
7" standard VAM chassis, unloaded; putty white 178 mm x 483 mm or 584 mm x 305 mm FVM-19X700
23" vertical cable guide (VCG) included (7" x 19" or 23" x 12")
7" LGX compatible VAM chassis, unloaded; 178 mm x 483 mm or 584 mm x 280 mm FVM-19X700X11
putty white, with rear doors, 23" VCG included (7" x 19" or 23" x 11")
Front vertical cable guide (VCG); putty white, 51 mm x 127 mm VCG-25
for 19" mounting environments (2" x 5")
Front vertical cable guide (VCG); putty white, 102 mm x 127 mm VCG-45
for 23" mounting environments (4" x 5")
FDM24-VAM525
Ordering Information
•
5.25" standard VAM chassis, unloaded; putty white, 133 mm x 584 mm x 305 mm FDM24-VAM525
for 23" mounting environments (5.25" x 23" x 12")
Ordering Information
Description Dimensions (HxWxD) Catalog Number
4" standard VAM chassis, unloaded; 102 mm x 584 mm x 305 mm FVM-23X400
for 23" mounting environments (4" x 23" x 12")
Ordering Information
Description Dimensions (HxWxD) Catalog Number
3.5" standard VAM chassis, unloaded; 89 mm x 483 mm or 582 mm x 305 mm FVM-19X350
for 19" or 23" mounting environments (3.5" x 19" or 23" x 12")
Ordering Information
6/09
Ordering Information
Description Dimensions (HxWxD) Catalog Number
8" FCM standard VAM chassis, front load; FDF-STDVAM
Inside Plant – Fiber Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
10.5" FL2000 VAM chassis, unloaded; 267 mm x 483 mm x 258 mm FL2-9VAM105
accommodates 9 single plug-in modules (10.5" x 19" x 10.1")
7" FL2000 VAM chassis, unloaded; 152 mm x 483 mm x 258 mm FL2-6VAM700
accommodates 6 single plug-in modules (7" x 19" x 10.1")
•
Note: The FL2000 VAM system is designed to accept only front access modules; i.e., all input
and output adapters, pigtails and/or bare fibers must be located on the front of the plug-in modules.
For complete information on ADC's FL2000 product family, please contact ADC Technical Assistance Center.
Ordering Information
Description Dimensions (HxWxD) Catalog Number
8" FCM WideVAM chassis, unloaded; 203 mm x 620 mm x 308 mm FDF-FCMWVAM
accommodates 6 single WideVAM modules (8" x 24.4" x 12.1")
106612AE
FVM-19X350W-M6
FVM-19X700W
Ordering Information
•
Ordering Information
Description Dimensions (HxWxD) Catalog Number
NGF MicroVAM chassis, unloaded - left orientation; 300 mm x 455 mm x 132 mm NGF-VSPM-7000L
accommodates 12 MicroVAM modules (11.8" x 17.9" x 5.2")
NGF MicroVAM chassis, unloaded - right orientation; 300 mm x 455 mm x 132 mm NGF-VSPM-7000R
accommodates 12 MicroVAM modules (11.8" x 17.9" x 5.2")
106612AE
•
6/09
The FMT MicroVAM chassis accommodates a wide variety of MicroVAM modules. The MicroVAM
module is ADC's highest density and most versatile VAM module.
Next Gen Network Solutions
Ordering Information
Description Dimensions (H x W x D) Catalog Number
FMT MicroVAM chassis, unloaded, 12" Depth
4-Position FMT Drawer, 1RU 44 mm x 483/584 mm 305 mm FMT-DVS000000-E00B
(1.75" x 19"/23" x 12")
8-Position FMT Drawer, 2RU FMX-ATT-BARMV00
89 mm x 483/584 mm 305 mm
12-Position FMT Drawer, 2RU FMT-GVM000000-A72P
(3.5" x 19"/23" x 12")
16-Position FMT Drawer, 2RU FMT-GVS000000-E96P
FMT MicroVAM chassis, unloaded, 15" Depth
106612AE
Ordering Information
Description Dimensions (HxWxD) Catalog Number
3.5" LGX compatible VAM chassis, unloaded; 89 mm x 477 mm x 279 mm FVM-LGX19X350-W
VAMs mount horizontally; (3.5" x 18.8" x 11")
accommodates up to 4 single modules
106612AE
•
6/09
MX6-HDVAMCHAS-L MX6-HDVAMCHAS-R
(Left Orientation) (Right Orientation)
•
6/09
PORT 19 X X PORT 18
X PORT 17
PORT 20 X X PORT 16
PORT 1 X X PORT 6 PORT 21 X X PORT 15
X PORT 14
PORT 2 X PORT 22 X
X PORT 13
X PORT 5 PORT 23 X X PORT 12
PORT 3 X
X PORT 11
PORT 24 X
X PORT 10
PORT 4 X X PORT 4
Next Gen Network Solutions
REAR FRONT
X PORT 3 PORT 25 X X PORT 9
PORT 26 X X PORT 8
X PORT 2 X PORT 7
PORT 27 X X PORT 6
PORT 28 X X PORT 5
X PORT 1 X PORT 4
PORT 29 X
X PORT 3
PORT 30 X X PORT 2
X PORT 1
FRONT
X PORT 9 X PORT 6
PORT 1 X
X PORT 8 X PORT 5 PORT 2 X
X PORT 7
X PORT 4 PORT 3 X
X PORT 6
X PORT 5 X PORT 3
PORT 4 X
REAR
X PORT 4 PORT 5 X
X PORT 2
X PORT 3 PORT 7 X PORT 6 X
X PORT 1
X PORT 2 PORT 8 X
X PORT 1
D G
X (Tx) X (MON Rx)
J XX%
X (Rx)
B 1x2
XX%
X (CUST Rx) 1x2
XX%
X (Rx MON) XX%
1x2 X (MON Tx)
1x2 SPLITTER SPLITTER
SPLITTER X (Tx) SPLITTER
XX%
X (Cust Tx) XX%
X (SRC Tx) XX% X (Rx)
XX%
DUAL MONITOR X (SRC Tx) X (Rx)
REAR J CROSS CONNECT FRONT X (Tx)
X (SRC Rx)
•
REAR J MONITOR MODULE FRONT REAR FRONT REAR C MONITOR MODULE FRONT
(Tx) X SOURCE X
(CUST MON) X (TX)
A1
X (CUST Tx)
R X (TxMON)
C
1x2 A2 XX%
SPLITTER 1x2 X SOURCE
X (Tx) SPLITTER (MON)
XX% X (SRC Rx)
A
XX% X CUSTOMER
(MON)
X (SRC Tx) X (Rx)
Other configurations and split ratios are available upon request. Please contact ADC Technical Assistance Center.
VLM-M Module for 7" LGX® compatible VAM chassis Connectorized Example
MXM-M Module for OMX600 high-density VAM chassis
®
Catalog Number
____________ ___ ___ ___ ___ ___ ___ ___ ___ ___
C 50/50
6/09
M 60/20/20
1
See opposite page to confirm compatibility. Other module styles available.
2
Number of circuits is dependent on module type.
Ordering example: When ordering a standard VAM module with one circuit, SC ultra polish connector, a 90/10 split
ratio, dual monitor module style with 5 m pigtail, order VMM-7U7U7U1AJ050505
Other configurations and split ratios are available upon request. Please contact ADC Technical Assistance Center.
PORT 19 X X PORT 18
X PORT 17
PORT 20 X X PORT 16
PORT 1 X X PORT 6 PORT 21 X X PORT 15
X PORT 14
PORT 2 X PORT 22 X
X PORT 13
X PORT 5 PORT 23 X X PORT 12
PORT 3 X X PORT 11
PORT 24 X
X PORT 10
PORT 4 X X PORT 4
Next Gen Network Solutions
REAR FRONT
Available Ports:
• 18 Front (36 LC)
• 6 Front (12 LC)
• 12 Rear (24 LC)
• 4 Rear (8 LC)
FRONT
FRONT
X PORT 9
X PORT 6
X PORT 8 PORT 1 X
X PORT 7 X PORT 5 PORT 2 X
X PORT 6 X PORT 4 PORT 3 X
X PORT 5 PORT 4 X
REAR X PORT 3
X PORT 4 PORT 5 X
X PORT 3 X PORT 2
PORT 7 X PORT 6 X
X PORT 2 X PORT 1
PORT 8 X
X PORT 1
2 3 4 5
REAR
REAR
REAR
REAR
•
6/09
Other configurations and split ratios are available upon request. Please contact ADC Technical Assistance Center.
Bare pigtail
FMT-MS Module for FMT 2 RU, NGF and NG3 MicroVAM chassis
®
(2 mm
Next Gen Network Solutions
jacketed)
Catalog Number
____________ __ ___ ___ ___ ___ _______ __ ___ ___ ___ ___
Split Ratio2
Multimode
2000 1x2 50/50
9A SC 50/125 µm
2100 1x2 55/45
9B SC 62.5/125 µm Maximum number of splitters will
1
Other configurations and split ratios are available upon request. Please contact ADC Technical Assistance Center.
PORT 19 X X PORT 18
X PORT 17
PORT 20 X X PORT 16
PORT 1 X X PORT 6 PORT 21 X X PORT 15
X PORT 14
PORT 2 X PORT 22 X
X PORT 13
X PORT 5 PORT 23 X X PORT 12
PORT 3 X
X PORT 11
PORT 24 X
X PORT 10
PORT 4 X X PORT 4
REAR FRONT
PORT 26 X X PORT 8
X PORT 7
X PORT 2 PORT 27 X X PORT 6
PORT 28 X X PORT 5
X PORT 1 PORT 29 X X PORT 4
X PORT 3
PORT 30 X X PORT 2
X PORT 1
FRONT
l1 l1 l1 l1
l2 COMMON COMMON COMMON COMMON
l2 l2 l2
106612AE
IN IN
OUT OUT IN OUT IN OUTOUT INOUT IN OUT IN OUT INOUT INOUT IN OUT IN IN
OUT INOUTIN OUT IN OUT IN OUT
l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1
1xN 1xN x N1 x N 1xN 1 x N COMMON 1 x N COMMON
l2 1xN l2 1l2 l2 COMMON l2 1 COMMON
x N l2 1 x N l2 1xN
COMMON x N COMMON 1 x1COMMON
1l2
COMMON Nx N l2 1 x N l2 1xN
l2 l2
A C E
•
WDM WDM
X 1550 X 1550 X 1550
X 1310 (OUT) (OUT)
(IN) (OUT
X MUX X MUX X MUX
X MUX
(OUT) (IN))
J K L UNIDIR
WDM
X 1310
(IN)
X 1550
M BIDIR
WDM
X 1310
(IN)
X 1550
(IN) (OUT)
X MUX X MUX
(OUT)
Other configurations and split ratios are available upon request. Please contact ADC Technical Assistance Center.
Adapter
optical distribution frame Standard VAM chassis port Adapter port
Connectorized
pigtail
WDMW- Module for 8" FCM and industry-standard (3 mm Connectorized
pigtail
jacketed) WDM
optical distribution frame WideVAM® chassis
Bare pigtail
FMT-MW Module for FMT 2 RU, NGF and NG3® MicroVam chassis (2 mm
jacketed)
Next Gen Network Solutions
Catalog Number
______________ __ ___ ___ __ __ __ __ ___ ___
PORT 19 X X PORT 18
X PORT 17
PORT 20 X X PORT 16
PORT 1 X X PORT 6 PORT 21 X X PORT 15
X PORT 14
PORT 2 X PORT 22 X
X PORT 13
X PORT 5 PORT 23 X X PORT 12
PORT 3 X X PORT 11
PORT 24 X
X PORT 10
PORT 4 X X PORT 4 FRONT
REAR
PORT 25 X X PORT 9
Next Gen Network Solutions
X PORT 3 X PORT 8
PORT 26 X
X PORT 7
PORT 27 X X PORT 6
X PORT 2 PORT 28 X X PORT 5
PORT 29 X X PORT 4
X PORT 3
X PORT 1 PORT 30 X X PORT 2
X PORT 1
X PORT 9 X PORT 6
l1 l1 l1 l1
l2 COMMON COMMON COMMON COMMON
l2 l2 l2
IN IN
OUT OUT IN OUT IN OUTOUT INOUT IN OUT IN OUT IN OUT INOUT IN OUT IN OUTIN IN OUTIN OUT
IN OUT IN OUT
l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1 l1
1xN 1 x N1 x N 1 x Nl2 COMMON
1 x N COMMON
1xN l21 x N l2 l2 l2 1COMMON
xN COMMON
l2 1 x N l2 1xN 1 l2
xN
COMMON x 1Nx N
COMMON1 COMMON 1 x N COMMON
1xN
l2 l2 1xN
l2 l2
Other configurations and split ratios are available upon request. Please contact ADC Technical Assistance Center.
Catalog Number
CW ______________ __ __ __ __ __ 0 __ __ __ 0 0 0
K LC ultra polish
N 1370 nm C MUX/DEMUX 4 channel
S LC angled polish or less
P 1350 nm
Number of Channels per Circuit Q 1330 nm D MUX/DEMUX 8 Channel
A 8 WideVAM only
R 1310 nm
B 4 S 1290 nm
C 10 In the ordering charts, “common”
T 1270 nm references the multiplexed side of
D 2
the CWDM, the side where multiple
E 1 optical signals co-exist on one fiber.
•
The FiberGuide system is a complete set of products designed and manufactured to ensure total
off-frame protection. Basic components include horizontal and vertical straight sections, horizontal
and vertical elbows, downspouts, junctions, and numerous support hardware and flex tube kits.
The FiberGuide system is available in a variety of sizes:
Speed of Installation
The FiberGuide® system features a variety of products that enable
quick installation. An Express Exit™ drop saves up to 40 minutes of
installation time per drop.
Raceway Flexibility
FiberGuide features 38 support structures, over 75 fittings, one dozen
drop options, and several other components to suit any application.
•
Speed of Deployment
Express Exits enable new drops to be added or removed quickly and
6/09
Recommended capacity takes into consideration random jumper placement into the FiberGuide®
system. Maximum density refers to the maximum number of fiber jumpers in a given cross-section of
a FiberGuide installation. The TracerLight® Connector Identification System is ADC's newest patch cord
solution. It features slightly different dimensions than standard patch cords.
Recommended/Maximum Density
Next Gen Network Solutions
2.0 mm 1080/1224 – –
3.0 mm 480/528 – –
6/09
2x2 System
1.7 mm 480/568 –
2.0 mm 360/408 – –
3.0 mm 160/176 – –
4x6 Straight Section 4x6 Downspout 4x6 End Cap Kit 4x6 Straight Section 4x6 Downspout 4x6 Snap-Fit Junction
FGS-MSHS-B FGS-MDSP-B FGS-HMEC-B FGS-MSHS-B FGS-MDSP-B FGS-MFAW-B
4x4/4x6
Downspout Insert 4x6 End Cap Kit
FGS-HDSI-AB FGS-HMEC-B
4x6 Snap-Fit Junction
FGS-MFAW-B
4x6 Downspout Cover
2x2 45°
FGS-MCDS-AB
Down Elbow
2x2 Junction Kit FGS-MD4A-C*
FGS-MJWR-C 4x4 End Cap with one
2" Flex Tube, 5' long
FGS-KT03-A1
Inside Plant – Fiber Solutions
FGS-MEX1-C-5F
2x2 Horizontal Solid
Straight Section 2x2 Vertical
FGS-MSHA-C* Slotted Duct Kit
FGS-KTW1-C
4x24-Inch Island T
106612AE
The 4x24 Island T with 12-inch exit is designed to be used over the NGF, NG3® or any high-density fiber
frame. The 4x24 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber
directly into the vertical cableways below.
•
6/09
4x24 Island T
(Shown with support brackets over an NGF frame.)
Fixture attached to sidewall of raceway Fixture protects cables during cutting of sidewall
106612AE
Fitting fills gap left by removed sidewall Supplied hardware secures fitting to raceway
and completes installation
•
6/09
Center Support
Bracket Kit
Top Support
Threaded Rod
C-Bracket
Threaded Rod
4x12 System
106612AE
Threaded Rod
Center Support
Bracket Kit Top Support Low Threaded Rod
Threaded Rod Profile C-Bracket
Trapeze
•
Bracket Kit
in those instances the variable fitting support locator can be installed on the bottom of the fitting,
allowing the support to be attached anywhere along the fitting bottom (photos 3, 4 and 5). When
combining several straight sections, it is recommended that support brackets are installed on both
sides of each junction.
Inside Plant – Fiber Solutions
1 2
106612AE
3 4 5
•
6/09
FGS-MSHA-C
Ordering Information
All yellow FiberGuide® system parts are available in black. To order parts in black, begin
configuration with prefix "FGSB-".
Ordering Information
Description Catalog Number
Next Gen Network Solutions
FGS-MSHS-A
•
6/09
All yellow FiberGuide® system parts are available in black. To order parts in black, begin
configuration with prefix "FGSB-".
4"x 4" and 4"x 6" Downspout Options and Support Kits
Ordering Information
Description Catalog Number
Next Gen Network Solutions
6" End Cap With (2) 2" Flex Tube, 5’ FGS-KT03-B FGS-MDSP-EX-A
All yellow FiberGuide® system parts are available in black. To order parts in black, begin
configuration with prefix "FGSB-".
Description Catalog Number
Next Gen Network Solutions
FGS-MU9E-B
Ordering Information
FGS-MSHS-B
•
6/09
All yellow FiberGuide® system parts are available in black. To order parts in black, begin
configuration with prefix "FGSB-".
Description CatalogNumber
FGS-MSHS-F
Description Catalog Number
•
All yellow FiberGuide® system parts are available in black. To order parts in black, begin
configuration with prefix "FGSB-".
Description Catalog Number FGS-ISLAND-H/F
Ordering Information
FGS-MTRM-H
Description Catalog Number
Ordering Information
6/09
FGS-MSHS-H
Description Catalog Number
Ordering Information
Description Catalog Number
Threaded Rod Trapeze Bracket Kit for: Variable Fitting Support Locator
Existing; 5/8 FGS-HETP-H-5/8 Kit – Horizontal Elbow
New; 5/8 FGS-HNTP-H-5/8 (FGS-MH4E-H-VS)
Existing 5/8" Threaded Rod Trapeze Bracket Kit Variable Fitting Support Locater Kit –
(FGS- HETP-H-5/8) Horizontal Cross with Dual 12" Exits
(FGS-MHXP-F/H-VS)
•
6/09
Express Exits™
Ordering Information
*The 2", 4" and Low Profile Express Exits work with any 4x4, 4x6, 4x12 and 4x24 FiberGuide straight sections.
Accessories
Ordering Information
Description Catalog Number
Distribution
used in these spaces must be nonflammable and Devices
must not emit appreciable amounts of smoke or
toxic gases when exposed to heat or flame.
Made from sturdy aluminum, ADC’s Plenum
FiberGuide System protects optical fibers Fiber
Raised
by physically separating them from copper Optic
Equipment
Floor
communications cable, power cable, ground
Inside Plant – Fiber Solutions
Horizontal Tee
Figure 2
Straight sections: U-shaped troughs that provide a protective guideway for optical fibers. Straight
sections are usually installed horizontally but may also be installed vertically when a system is mounted
on multiple levels. Straight sections are 6 feet in length; covers are also available. The covers snap into
place but can be easily removed for installing fibers.
Fittings: Elbows, tees, crosses, trumpet flares, and conversions. The fittings are used for changing
direction, converting from one size system to another, adding branch segments, and routing the fibers
Next Gen Network Solutions
into and out of the system. Like the straight sections, snap-on covers are also available for the fittings.
Junction kits: Used for aligning and connecting straight sections and fittings. Two components are
joined by inserting both components into a junction and then pushing them together.
Support kits: Used to support the Plenum FiberGuide system. The short, long, span, and diagonal
bracket kits are used for supporting straight sections from round or square tubing.
Flexible tubing: Used in Plenum FiberGuide systems when the exact layout of the equipment drop
4x12 Horizontal Straight Section 2x2, 4x6, and 4x12 Junction Kits
Recommended capacity takes into consideration random jumper placement into the FiberGuide system. ®
Trough capacity refers to the maximum number of fiber jumpers in a given cross-section of a
FiberGuide installation.
Recommended Density
Next Gen Network Solutions
Maximum Density
1.7 mm 2.0 mm 3.0 mm
Patch Cords Patch Cords Patch Cords
Maximum
Patch Cord 142 102 44
Density (per in )
2
106612AE
The 2x2 Plenum FiberGuide system interfaces with ADC’s standard 2x2 FiberGuide System and requires no
®
Ordering Information
Catalog Number
Next Gen Network Solutions
Number
Description Fitting Snap-on Cover of Junctions
Straight section
2x2 straight section - length: 6’ PFGF-PSHS-C PFGC-PSHS-C –
Fittings
2x2 horizontal T PFGF-PHRT-C PFGC-PHRT-C 3
2x2 horizontal cross PFGF-PHXP-C PFGC-PHXP-C 4
2x2 90º horizontal elbow PFGF-PH9E-C PFGC-PH9E-C 2
Straight section
4x6 straight section – 6’ long PFGF-PSHS-B PFGC-PSHS-B –
Fittings
4x6 horizontal T PFGF-PHRT-B PFGC-PHRT-B 3
4x6 horizontal cross PFGF-PHXP-B PFGC-PHXP-B 4
4x6 90º horizontal elbow PFGF-PH9E-B PFGC-PH9E-B 2
4x6 45º horizontal elbow PFGF-PH4E-B PFGC-PH4E-B 2
4x6 90º up elbow PFGF-PUPE-B PFGC-PUPE-B 2
Inside Plant – Fiber Solutions
Catalog Number
Number
Description Fitting Snap-on Cover of Junctions
Straight section
4x12 straight section – 6’ long PFGF-PSHS-F PFGC-PSHS-F –
Fittings
4x12 horizontal T PFGF-PHRT-F PFGC-PHRT-F 3
4x12 horizontal cross PFGF-PHXP-F PFGC-PHXP-F 4
4x12/4x6 horizontal T PFGF-PHRT-F/B PFGC-PHRT-F/B (2) 4x12, (1) 4x6
•
for use with 2x2 and 4x6 sizes; 8.21" overall length
Short bracket kit with square U-bolt for easy access mounting PFGF-EASSPT-C/B
Long bracket kit PFGF-LSPT-C/B/F
for use with 2x2, 4x6, and 4x12 sizes; 18.84" overall length
Long bracket kit with square U-bolt for easy access mounting PFGF-EALSPT-C/B/F
Span bracket kit PFGF-ESPT-C/B/F
for use with 2x2, 4x6, and 4x12 sizes; spans 24" center to center floor struts
All support bracket kits fit round support pedestals sizes 0.5” to 1.125”.
Flexible Tubing
Ordering Information
Description Catalog Number
One hose adapter, with 5' (1.53 m) hoses and finishing couplers PFGF-KT03-C
Two hose adapter, with 5' (1.53 m) hoses and finishing couplers PFGF-KT03-B
Extension tube, 5' (1.53 m) long with splice coupler PFGF-HEXT
Finishing coupler PFGF-HFIN
Mounting strap PFGF-HMST
106612AE
Features:
• Flexible and versatile system that safely and • Quickly installed onto existing rack
securely routes fiber • Provides 1.5-inch bend radius protection
• Provides superior cable management on active • Made of robust and durable material
equipment racks
Next Gen Network Solutions
Components
Inside Plant – Fiber Solutions
2x2 Solid Vertical Duct Kit 2x4 Solid Vertical Duct Kit 4x4 Slotted Vertical Duct Kit 90° Inside Elbow
(FGS-KTW1-JN) (FGS-KTW2-RN) (FGS-KTW2-J) (FGS-V9E44)
(cover closed) (cover open)
106612AE
4-Inch Vertical to 2-Inch Exit Trumpet 4-Inch Exit Trumpet 4x4 Modified
2x2 Trumpet Fitting (FGS-VQE22) (FGS-VQE44) Trumpet Flare Kit
(FGS-TRMP42) (FGS-MTRM-D)
Applications
•
6/09
Ordering Information
Description Catalog Number
2x2 System (2" wide x 2" deep)
2x2, 6' Vertical duct kit, slotted (1.5" Slot spacing) hinged cover FGS-KTW1-JA
2x2, 6' Vertical duct kit, solid, hinged cover FGS-KTW1-JN
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Cable Guide Bracket RGS-VC001-B
Inside Plant – Fiber Solutions
Edge Protectors
Edge Protector for Left-Hand Cable Entry/Exit RGS-RC005-B
Edge Protector for Right-Hand Cable Entry/Exit RGS-RC006-B
1.5" Bend Radius Spool
Full Spool RGS-SC001-B
Half Spool – Top RGS-SC002-B
Half Spool – Bottom RGS-SC003-B
Radius Limiting Edge Protector
Fiber Exit – Right/Down RGS-RC001-B
Fiber Exit – Left/Down RGS-RC002-B
Fiber Exit – Right/Up RGS-RC003-B
Fiber Exit – Left/Up RGS-RC004-B
Vertical Risers
7' x 10" Riser RGS-V0CX0A-P
7' x 5" Riser RGS-V0BX0A-P
106612AE
•
6/09
SC to SC SC to LC LC to LC
FPC2-MSC-A-1M FPC2-MSC/MLC-A-1M FPC2-MLC-A-1M
FPC2-MSC-A-3M FPC2-MSC/MLC-A-3M FPC2-MLC-A-3M
FPC2-MSC-A-5M FPC2-MSC/MLC-A-5M FPC2-MLC-A-5M
FPC2-MSC-A-6M FPC2-MSC/MLC-A-6M FPC2-MLC-A-6M
FPC2-MSC-A-7M FPC2-MSC/MLC-A-7M FPC2-MLC-A-7M
FPC2-MSC-A-10M FPC2-MSC/MLC-A-10M FPC2-MLC-A-10M
•
Available in any standard length or connector style, TracerLight patch cords have the same functions,
optical performance and stringent environmental requirements as our standard patch cords. TracerLight
patch cords are installed in the same manner as standard patch cords and can be pulled through ADC‘s
FiberGuide® fiber cable management system with ease.
The compact power source is comprised of a lightweight, plastic flashlight body featuring two AA
batteries and a printed circuit board (PCB). It provides approximately 80 hours of continuous service and
features 1-hour auto-off. The end of battery life is indicated by a slowing of the blink rate.
Ordering Information
Description Catalog Number
TracerLight power source FTL-PS
TracerLight plus launch cable (for use with a tone generator) FTL-TGLC
•
6/09
Simplex
Catalog Number
FTL- __ / __ - __ __ __ __ M
Connector Style (first end)
Singlemode
Assembly Length
7 SC ultra polish
001-020 1-20 meters in 1 meter increments
E SC angled polish
Next Gen Network Solutions
C LC ultra polish
Ordering Examples
M LC angled polish
FTL-7/7-D003M: Singlemode simplex patch cord with SC connectors
Multimode
on both ends, 3 meters in length.
9 SC FTL-9/9-A005M: Multimode simplex patch cord with SC connectors on
P LC both ends using 50/125 µm fiber, 5 meters in length.
Duplex
Catalog Number
FTL- __ __ __ __ __ __ M
Connector Style (first end)
Singlemode Assembly Length
7 SC ultra polish 001-020 1-20 meters in 1 meter increments
E SC angled polish 025-065 25-65 meters in 5 meter increments
106612AE
Other connector styles are available upon request. Please contact ADC Technical Assistance Center.
All patch cords undergo stringent testing for both SC ultra polish
insertion loss and return loss at the factory before
shipment to ensure that only quality product is SC angled polish
delivered to the customer.
ADC offers ultra physical contact (UPC) polish on FC ultra polish
the SC, FC, and LC connector styles.
Next Gen Network Solutions
LC angled polish
Angled polish is available on the LC connector
and the SC connector styles. Angled polish
LC ultra polish
should be used in applications that require better
control of return loss. ADC has tight tolerances
regarding the rotation of the ferrule to maintain Connector Types
low insertion loss values.
Inside Plant – Fiber Solutions
Catalog Number
__ __ - __ - __ - __ M
Ordering Examples
•
FPC2-SPSC-10M: Singlemode 2.0 mm dual zip patch cord with SC ultra polish connectors on both ends,
10 meters in length with standard breakout length of 0.31 m (12") on both ends.
6/09
1
For hybrid patch cords, enter both connector types in this field and separate them with a slash
mark; remove 's' from the ultra polish option.
FPCF-SPSC/PLC-S-10M: Singlemode 1.7 mm simplex patch cord with SC ultra polish connector on one end and
LC ultra polish connector on the other end, 10 meters in length.
2
One connector per end; requires dual zip cable
* Not a substitute for well-engineered cable management.
Other connector styles are available upon request. Please contact ADC Technical Assistance Center.
FPC Connector on both ends (patch 1-20 1-20 meters in 1 meter increments
cord) 25-65 25-65 meters in 5 meter increments
FPT Connector on one end 70-150 70-150 meters in 10 meter increments
(pigtail)
Fiber Type
Cable Type
A 50/125 µm multimode
Standard multimode
B 62.5/125 µm multimode
M 2.0 mm single
F 1.7 mm single
Multimode Connector Type1
9 900 µm
MSC SC simplex
2 2.0 mm dual zip
MDSC SC duplex2
T 1.7 mm dual zip
MLC LC simplex
Multimode 50/125 µm 10G
106612AE
MA 2.0 mm single
FA 1.7 mm single
2A 2.0 mm dual zip
TA 1.7 mm dual zip
Ordering Examples
•
FPCM-MSC-B-7M: Multimode simplex 2.0 mm patch cord with SC connectors on both ends, 62.5/125 µm fiber
type, 7 meters in length.
6/09
1
For hybrid patch cords, enter both connector types in this field and separate them with a slash mark.
FPCM-MSC/MLC-A-3M: Multimode simplex 2.0 mm patch cord with SC connector on one end and LC connector
on the other end, 50/125 µm fiber type, 3 meters in length.
2
One connector per end; requires dual zip cable
Other connector styles are available upon request. Please contact ADC Technical Assistance Center.
Catalog Number
FPM-0 __ / __ - __ __ __ __ M- __ __ / __ __
Connector Type
Breakout Length
(1st and 2nd end)
X Length in inches
0 Stub (only on 2nd end)
LEAVE
7 SC ultra polish BLANK Both ends 0.31 m (12")
E SC angled polish
2 FC ultra polish Assembly Length
Ordering Example
FPM-07/0-P005M: Singlemode multifiber patch cord with SC ultra polish connectors on one end, no connectors on
the other end (pigtail), 6-fiber soft wall, 5 meters long with standard breakout.
Other connector styles and breakout lengths are available upon request. Please contact ADC Technical Assistance Center.
Soft Wall
(12-Fiber Shown)
Catalog Number
Connector Type
(1st and 2nd end) Breakout Length
0 Stub (only on 2nd end) X Length in inches
LEAVE
9 SC BLANK Both ends 0.31 m (12")
P LC
Assembly Length
Cable Type 001-020 1-20 meters in 1 meter increments
PB 6-fiber soft wall, 62.5/125 µm 025-065 25-65 meters in 5 meter increments
NB 12-fiber soft wall, 62.5/125 µm 070-150 70-150 meters in 10 meter increments
WC 6-fiber soft wall, 50/125 µm
NA 12-fiber soft wall, 50/125 µm
NH 6-fiber soft wall, 50/125 µm
laser optimized to 300 m (aqua)
NG 12-fiber soft wall, 50/125 µm
laser optimized to 300 m (aqua)
106612AE
Ordering Example
MFPM-9/P-PB008M: Multimode multifiber patch cord with SC connectors on one end and LC ultra polish
connectors on the other end, 6-fiber soft wall cable, 8 meters in length with standard breakout.
Other connector styles and breakout lengths are available upon request. Please contact ADC Technical Assistance Center.
•
6/09
Catalog Number
IFC - __ /__ __ __ __ __ - __
Next Gen Network Solutions
K LC ultra polish
2E FL2, 96 exit up
M LC angled polish
2F FL2, 72 exit down
2G FL2, 96 exit down
Cable Type NGF NGF, 96- and 144-position
A 12-fiber stranded LA LSX, 72- and 96-position
B 24-fiber stranded LB LSX, 144-position
2 48-fiber stranded
V 72-fiber stranded
Assembly Length for
L 96-fiber stranded Connector to Stub
EH 144-fiber stranded 016 16 m (50')
NA 12-fiber ribbon 023 23 m (75')
HA 24-fiber ribbon 031 31 m (100')
JA 48-fiber ribbon 046 46 m (150')
DS 72-fiber ribbon
061 61 m (200')
LA 96-fiber ribbon
077 77 m (250')
LH 144-fiber ribbon
106612AE
092 92 m (300')
122 122 m (400')
153 153 m (500')
Assembly Length for
Connectors on Both Ends2
XXX Length in meters
Example: 010 = 10 meters
125 = 125 meters
•
6/09
1
For competitors’ panel products, ADC recommends using the FCM breakout length (1.8 m = 6').
2
Standard lengths for connectors on both ends up to 150 meters.
For information on ADC's FL2000 (FL2) FCM or LSX panel products and Next Generation Frame (NGF) Fiber
Termination Blocks, call ADC Technical Assistance Center.
Additional fiber counts, lengths and connector styles are available upon request. Please contact ADC Technical
Assistance Center.
Catalog Number
MIFC - __ / __ __ __ __ __ __ - __
Next Gen Network Solutions
Cable Type
AB 12-fiber stranded 62.5 µm Assembly Length for
Connector to Stub
BB 24-fiber stranded 62.5 µm
016 16 m (50')
VB 72-fiber stranded 62.5 µm
023 23 m (75')
LB 96-fiber stranded 62.5 µm
031 31 m (100')
FT 144-fiber stranded 62.5 µm
046 46 m (150')
AC 12-fiber stranded 50/125 µm
061 61 m (200')
AD 24-fiber stranded 50/125 µm
077 77 m (250')
VA 72-fiber stranded 50/125 µm
092 92 m (300')
VZ 144-fiber stranded 50/125 µm
122 122 m (400')
VE 72-fiber stranded plenum laser optimized
106612AE
1
For competitors’ panel products, ADC recommends using the FCM breakout length (1.8 m = 6').
2
Standard lengths for connectors on both ends up to 150 meters.
For information on ADC's FL2000 (FL2) panel products and Next Generation Frame (NGF) Fiber Termination Blocks,
call ADC Technical Assistance Center.
Additional fiber counts, lengths and connector styles are available upon request. Please contact ADC Technical
Assistance Center.
A fiber optic attenuator is an optical device that induces a calibrated fixed loss between two connectors,
which dampens, or attenuates the fiber optic signal. Attenuation is required if an optical signal has too
much power, exceeding the operating range of the equipment, which causes saturation at the receiver
and induces system errors or failures.
ADC’s full line of attenuators is manufactured to meet the demands of your network. In-line attenuators
are installed between an adapter and a connector; they are fused attenuators, providing exceptional
optical performance.
Next Gen Network Solutions
Inside Plant – Fiber Solutions
Attenuation Tolerance
≤5 dB ±0.75 dB
>5 dB ±10%
Ordering Information
Description Catalog Number*
LC ultra polish
05 dB FOA-INLC05
10 dB FOA-INLC010
15 dB FOA-INLC015
20 dB FOA-INLC020
SC ultra polish
05 dB FOA-INSC05
10 dB FOA-INSC10
106612AE
15 dB FOA-INSC15
20 dB FOA-INSC20
SC angled polish
05 dB FOA-INASC05
10 dB FOA-INASC10
15 dB FOA-INASC15
20 dB FOA-INASC20
•
FC ultra polish
6/09
05 dB FOA-INFC05
10 dB FOA-INFC10
15 dB FOA-INFC15
20 dB FOA-INFC20
* Other attenuation values and connector styles are available upon request. Please contact ADC Technical
Assistance Center.
Ordering Information
Description Catalog Number*
Multimode FasTerm connector
SC connector FTC-SCM111
Singlemode FasTerm connector
Tool Kit
Ordering Information
Description Catalog Number
FasTerm tool kit
Multimode tool kit FTC-KIT001
Singlemode SC tool kit* FTC-KIT002-SC
Singlemode FC tool kit* FTC-KIT002-FC
*Each tool kit is identical except for the polishing puck. Additional polishing
pucks may be purchased to expand the capabilities of a singlemode kit. FasTerm Tool Kit
106612AE
Accessories
Ordering Information
Description Catalog Number
Multimode consumables kit (100 terminations); connectors not included FTC-CNSM01
Singlemode consumables kit*; connectors not included FTC-CNSM02
•
*ADC recommends that one consumable kit be used for every 25 singlemode connector terminations.
Ordering Information
Description Catalog Number*
Simplex adapters
With phosphor bronze sleeve
Singlemode LC FBA-LC
Singlemode SC FBA-SC
Singlemode SC - no flange FBA-SCNF
Singlemode FC - round adapter FBA-FR
Multimode SC FBA-MSC
Multimode SC- no flange FBA-MSCNF
With zirconia sleeve
Singlemode LC FBA-LC-Z-NF
Singlemode LC - angled polish FBA-ALCZ
106612AE
Singlemode SC FBA-SCZ
Singlemode SC - no flange FBA-SCZNF
Singlemode SC - angled polish FBA-ASCZ
Singlemode FC - round adapter FBA-FRZ-AR
Duplex adapters
With phosphor bronze sleeve
Singlemode SC FBA-DSCNF
•
Multimode SC FBA-DMSCNF
6/09
Singlemode LC FBA-DLCNF
Multimode LC FBA-DMLCNF
With zirconia sleeve
Singlemode SC FBA-DSCZNF
Singlemode SC - angled polish FBA-DASCZNF
Singlemode LC FBA-DLC-Z-NF
Singlemode LC - angled polish FBA-DALC-Z
* Other connector styles are available upon request. Please contact ADC Technical Assistance Center.
Cleaning Kit
Ordering Information
Description Catalog Number
Fiber connector/adapter cleaning kit FPC-CLNKIT
Features Applications
• 900 µm tight buffered fibers designed for • Between main cross-connects and
one-pass mechanical stripping telecommunications room
Inside Plant – Fiber Solutions
Optical Performance
106612AE
Dielectric Central
Strength Member
10 Gigabit Ethernet distance guarantees at 1300 nm are achieved via four 3.125 Gbps channels multiplexed with
1
Ordering Information
Fibers Diameter Weight Minimum Bend Radius Catalog Number*
Loaded Installed
106612AE
mm in kg/km lb/1000' mm in mm in
4 4.1 0.16 34 23 81.3 3.2 40.6 1.6 6004AIPCBCYYY
6 4.8 0.19 43 29 96.5 3.8 48.3 1.9 6006AIPCBCYYY
8 5.3 0.21 59 40 106.7 4.2 53.3 2.1 6008AIPCBCYYY
12 6.4 0.25 73 49 127 5.0 63.5 2.5 6012AIPCBCYYY
18 6.4 0.25 73 49 127 5.0 63.5 2.5 6018AIPCBCYYY
24 7.4 0.29 125 84 147.3 5.8 73.7 2.9 6024AIPCBCYYY
•
Features Applications
Inside Plant – Fiber Solutions
Compliances
• Telcordia GR-409-CORE, EIA/TIA FOTP
standards
• TIA/EIA 568-B
• (UL) 1666, NEC OFNR, FT-4
106612AE
Optical Performance
Maximum Attenuation Typical Attenuation Guaranteed Minimum
(dB/km) (dB/km) bandwidth (MHz/km)
Multimode 850 nm/1300 nm 850 nm/1300 nm 850 nm/1300 nm
62.5/125 3.5/1.5 3.0/1.0 2001/5001
62.5/125 µm enhanced 3.5/1.5 3.0/1.0 2001/6001
50/125 µm 3.5/1.5 3.0/1.0 5001/5001
•
Ordering Information
Fibers Diameter Weight Minimum Bend Radius Catalog Number*
Loaded Installed
mm in kg/km lb/1000' mm in mm in
106612AE
Rip Cord
Next Gen Network Solutions
Subunit
Aramid Yarn Strength Member
Inside Plant – Fiber Solutions
Features Compliances
• 900 µm tight buffered fibers designed for • Telcordia GR-409-CORE, EIA/TIA FOTP
one-pass mechanical stripping standards
• Constructions available with four to 24 fibers • TIA/EIA 568-B
• Available with 2.9, 2.4, 2.0 and 1.6 mm • (UL) 1666, NEC OFNR, FT-4 or (UL) 910, NEC
subunits OFNP, FT-6
• All-dielectric construction includes aramid yarn
tensile strength members Armored constructions are available.
Please contact your ADC representative.
• All cables tested to Telcordia and EIA/TIA FOTP
standards
• Optimized for all standard connectors
• Individual subunits allow for easy routing
of fibers to termination points while
maintaining fiber protection
• Supports critical office and factory applications
Optical Performance
106612AE
10 Gigabit Ethernet distance guarantees at 1300 nm are achieved via four 3.125 Gbps channels multiplexed with
1
Ordering Information
Diameter Weight
UL Type Jacket Type Fibers Catalog Number*
mm in kg/km lb/1000'
Riser PVC 4 9.4 0.37 82 55 6004LFRBKOYYYZZSUB
Riser PVC 6 10.4 0.41 113 76 6006LFRBKOYYYZZSUB
Riser PVC 12 16.3 0.64 272 183 6012LFRBKOYYYZZSUB
Riser PVC 24 18.0 0.71 329 221 6024LFRBKOYYYZZSUB
Plenum PVDF 4 6.9 0.27 82 55 6004PTHBKOYYYZZSUB
Plenum PVDF 6 8.6 0.34 113 76 6006PTHBKOYYYZZSUB
Plenum PVDF 12 14.2 0.56 272 183 6012PTHBKOYYYZZSUB
Plenum PVDF 24 16.8 0.66 329 221 6024PTHBKOYYYZZSUB
106612AE
Features
• Evenly distributed aramid yarn strength member simplifies terminations
• Eliminates the need to furcate for hybrid patch cords, thus reducing labor costs
• Versatile buffer size can be configured for specific small-form-factor connectors
• Reduced shrink back minimizes attenuation and connector separation
Next Gen Network Solutions
Applications
• Communications closet patch cord assemblies
• Workstation outlet patch cord assemblies
• Small-form-factor connectors: MTRJ, LC, MU and LX.5® connectors
Inside Plant – Fiber Solutions
Compliances
• Heavy metal/lead free cable independently verified to comply with current
worldwide environmental demands
• Restriction of the Use of Hazardous Substances (RoHS) (2002/95/EC)
• State of California Safe Drinking and Toxic Enforcement Act of 1986 (Proposition 65)
• ISO/IEC 11801, IEC 60794-2, Optical Fiber Cables–Part 2
• Telcordia GR-409-CORE, EIA/TIA FOTP standards
• TIA/EIA 568-B
• (UL) 910, NEC OFNP, FT-6
Simplex Duplex
PVC Outer Jacket (OFNP)
106612AE
Zip Cord
•
Optical Performance
Maximum Attenuation Typical Attenuation Guaranteed Minimum
(dB/km) (dB/km) bandwidth (MHz/km)
Multimode 850 nm/1300 nm 850 nm/1300 nm 850 nm/1300 nm
62.5/125 3.5/1.5 3.0/1.0 2001/5001
Next Gen Network Solutions
10 Gigabit Ethernet distance guarantees at 1300 nm are achieved via four 3.125 Gbps channels multiplexed with
1
Ordering Information
Diameter Weight
Description Fibers mm in kg/km lb/1000' Catalog Number
Singlemode
Simplex 1 1.6 0.063 3.2 2.2 6001LFPSFH01016
Next Gen Network Solutions
50/125 µm Multimode
Simplex 1 1.6 0.063 3.2 2.2 6001LFPSFH05016
Zip cord 2 1.6 x 3.5 0.063 x 0.138 6.8 4.6 6002LFPZCH05016
Simplex 1 2.0 0.079 3.6 2.4 6001LFPSFH05020
Zip cord 2 2.0 x 4.0 0.079 x 0.157 7.7 5.2 6002LFPZCH05020
Simplex 1 2.9 0.114 6.4 4.3 6001LFPSFH05029
Zip cord 2 2.9 x 6.0 0.114 x 0.236 15.9 10.7 6002LFPZCH05029
Duplex 2 2.9 0.114 6.8 4.6 6002LFPSKD05029
50/125 µm Enhanced Multimode
Simplex 1 1.6 0.063 3.2 2.2 6001LFPSFH50E16
Zip cord 2 1.6 x 3.5 0.063 x 0.138 6.8 4.6 6002LFPZCH50E16
Simplex 1 2.0 0.079 3.6 2.4 6001LFPSFH50E20
Zip cord 2 2.0 x 4.0 0.079 x 0.157 7.7 5.2 6002LFPZCH50E20
Simplex 1 2.9 0.114 6.4 4.3 6001LFPSFH50E29
Zip cord 2 2.9 x 6.0 0.114 x 0.236 15.9 10.7 6002LFPZCH50E29
Duplex 2 2.9 0.114 6.8 4.6 6002LFPSKD50E29
106612AE
•
6/09
Ordering Information
Diameter Weight
Description Fibers mm in kg/km lb/1000' Catalog Number
50/125 µm Ultra Multimode
Simplex 1 1.6 0.063 3.2 2.2 6001LFPSFH50U16
Next Gen Network Solutions
Features
• Evenly distributed aramid yarn strength member simplifies terminations
• Eliminates the need to furcate for hybrid patch cords, thus reducing labor costs
• Versatile buffer size can be configured for specific small-form-factor connectors
Next Gen Network Solutions
Applications
• Communications closet patch cord assemblies
• Workstation outlet patch cord assemblies
Inside Plant – Fiber Solutions
Compliances
• Heavy metal/lead free cable independently verified to comply with current worldwide
environmental demands
• Restriction of the Use of Hazardous Substances (RoHS) (2002/95/EC)
• State of California Safe Drinking and Toxic Enforcement Act of 1986 (Proposition 65)
• ISO/IEC 11801, IEC 60794-2, Optical Fiber Cables–Part 2
• Telcordia GR-409-CORE, EIA/TIA FOTP standards
• TIA/EIA 568-B
• (UL) 1666, NEC OFNR, FT-4
Simplex Duplex
PVC Outer Jacket (OFNP)
106612AE
Zip Cord
•
Optical Performance
Maximum Attenuation Typical Attenuation Guaranteed Minimum
(dB/km) (dB/km) bandwidth (MHz/km)
Multimode 850 nm/1300 nm 850 nm/1300 nm 850 nm/1300 nm
62.5/125 3.5/1.5 3.0/1.0 2001/5001
Next Gen Network Solutions
10 Gigabit Ethernet distance guarantees at 1300 nm are achieved via four 3.125 Gbps channels multiplexed with
1
Ordering Information
Diameter Weight
Description Fibers mm in kg/km lb/1000' Catalog Number
Singlemode
Simplex 1 1.6 0.063 3.2 2.2 6001LFRSFH01016
Next Gen Network Solutions
*Catalog numbers starting with 3002 indicate 650 µm PVC tight buffer for use with MTRJ connectors.
•
6/09
Ordering Information
Diameter Weight
Description Fibers mm in kg/km lb/1000' Catalog Number
50/125 µm Ultra Multimode
Simplex 1 1.6 0.063 3.2 2.2 6001LFRSFH50U16
Next Gen Network Solutions
*Catalog numbers starting with 3002 indicate 650 µm PVC tight buffer for use with MTRJ connectors.
106612AE
•
6/09
Central Member
Ripcord
Features
Inside Plant – Fiber Solutions
Compliances
Optical Performance
Maximum Attenuation Typical Attenuation Bandwidth1
106612AE
10 Gigabit Ethernet distance guarantee at 1300 nm achieved via four 3.125 Gbps channels multiplexed with
1
Strength Member
Next Gen Network Solutions
Strength Member
Flame Retardant Outer Jacket
Ripcord
Features
• Dry cable core and dry buffer tubes provide effective water blocking without the need for
traditional gel filler
• Can be placed anywhere in the network, bypassing transition points from outdoor to indoor
• Installation times reduced because there is no need to clean gels
• Excellent flame retardancy
• Flexible design for easy installation
• Color-coded buffer tubes and fibers
• Wide operating temperature: -40° to +75° C (-40° to +167° F)
106612AE
Optical Performance
Maximum Attenuation Typical Attenuation Guaranteed Minimum
(dB/km) (dB/km) bandwidth (MHz/km)
Multimode 850 nm/1300 nm 850 nm/1300 nm 850 nm/1300 nm
62.5/125 3.5/1.5 3.0/1.0 2001/5001
62.5/125 µm enhanced 3.5/1.5 3.0/1.0 2001/6001
50/125 µm 3.5/1.5 3.0/1.0 5001/5001
•
10 Gigabit Ethernet distance guarantees at 1300 nm are achieved via four 3.125 Gbps channels multiplexed with
1
Ordering Information
Diameter Weight
UL Type Fibers mm in kg/km lb/1000' Catalog Number*
Dry loose tube: 6 6.5 .255 43 29 QXXXDLTIORYYY
in/outdoor riser 12 6.5 .255 43 29
24 10.1 .396 82 55
48 10.1 .396 82 55
72 11.9 .467 111 75
144 17.8 .700 252 169
Dry loose tube: 6 6.6 .26 48 32 QXXXDLTIOPYYY
in/outdoor plenum 12 6.6 .26 48 32
24 6.2 x 12.6 .245 x .495 80 54
106612AE
48 9.4 .37 82 55
72 11.7 .46 101 68
144 17.5 .69 315 212
*Replace XXX with fiber count. Replace YYY with fiber type:
010 = Singlemode 50E = 50/125 µm Enhanced multimode
062 = 62.5/125 µm Multimode 50U = 50/125 µm Ultra multimode for 300 m 10 Gbps
62E = 62.5/125 µm Enhanced multimode 5U5 = 50/125 µm Ultra multimode for 550 m 10 Gbps
•
Loose Tube
PE Outer Jacket
3.0 mm (0.12") Gel-Filled Buffer Tube
Aramid Yarn Strength Member
250 µm UV Colored Optical Fiber
Central Strength Member
Water Swellable Member
Next Gen Network Solutions
Ripcord
Features
Optical Performance
Maximum Attenuation Typical Attenuation Guaranteed Minimum
(dB/km) (dB/km) bandwidth (MHz/km)
Multimode 850 nm/1300 nm 850 nm/1300 nm 850 nm/1300 nm
62.5/125 3.5/1.5 3.0/1.0 2001/5001
62.5/125 µm enhanced 3.5/1.5 3.0/1.0 2001/6001
50/125 µm 3.5/1.5 3.0/1.0 5001/5001
•
10 Gigabit Ethernet distance guarantees at 1300 nm are achieved via four 3.125 Gbps channels multiplexed with
1
Ordering Information
Diameter Weight
Cable Type Fibers mm in kg/km lb/1000' Catalog Number*
Duct (all dielectric) 4-12 10.2 .40 77 52 QXXXLTSDNAYYY
18 11.4 .45 88 59
24 11.4 .45 88 59
48 11.4 .45 97 65
72 12.4 .49 122 82
144 18.3 .72 252 169
Armored (dual jacket) 4-6 14.5 .57 201 135 QXXXLTDDARYYY
12-24 15.7 .62 214 144
48 15.7 .62 223 150
106612AE
Note: Single jacket armored and higher fiber counts are available upon request.
Please contact your ADC representative.
6/09
Outer Jacket
Inner Tube
Features Applications
Inside Plant – Fiber Solutions
• PVC • Nylon
• Polyester • ETFE
• PVDF • Polyurethane
• Low smoke zero halogen (LSZH)
106612AE
Ordering Information
Description Catalog Number*
500 x 900 µm PVC furcation tubing F6NPVCFT5X9YY
500 x 900 µm Hytrel furcation tubing
®
F7NHYTFT5X9YY
for extreme temperatures and chemical resistance
Next Gen Network Solutions
VDC
Select Series™ ±24 or 100 A 50 A Standard N/A N/A N/A Dual 8
Breaker 48 VDC
Select Series™ -48 2 x 75 50 A* Standard Dual 5 N/A Dual 4 N/A LVD
LVD VDC A per
side
Modular -48 2 x 75 50 A* Front Dual 8 N/A Dual 4 N/A LVD
LVD VDC A per
side
•
Series™ VDC
GMT 60e -48 60 A 15 A Standard Dual 20 N/A N/A N/A
VDC
DSX PDP -42 60 A 3A Standard Single 20 N/A N/A N/A
to -56
VDC
*GMT=10 -15 A KLM = Up to 30 A TPA = Up to 50 A
Note: Don’t forget about the input/output rule: The combined outgoing voltage cannot exceed what is
coming in from the Battery Distribution Fuse Bay (BDFB)
Ordering Information
Description Color Shipping Catalog Number
Standard front and rear access fuse panels; Dual power feed
10/10 position fuse configuration, Wire-wrap Putty White Quick Ship PWX-001RGCSD10PWDP
alarm connection Black Standard PWX-001RGCSD10PWDB
10/10 position fuse configuration, Screw-down Putty White Standard PWX-001RGCSD10PSDP
barrier terminal strip alarm contact connection Black Standard PWX-001RGCSD10PSDB
20/20 position fuse configuration, Wire-wrap
Putty white Standard PWX-001RGCSD20PWDP
alarm connection
Total front access fuse panels
Dual power feed, 10/10 position fuse configuration, See alarm contact connection options below
Ordering Information
6/09
Note: Panels ship with dummy fuses installed in all positions, one designation card holder and card, one voltage
designation label, two 2-hole lugs per power bus, two ring lugs (for grounding), and one designation pin holder
per fuse holder.
Ordering Information
Description Amp Max Shipping Catalog Number
Standard front and rear access fuse panels
Dual power feed, Wire-wrap alarm contact connection, Putty White
10/10 position fuse configuration 20 Amp max per fuse Quick Ship PWX-031RXCSD10PWDP
15 Amp max per fuse Standard PWX-031RDCSD20PWDP
20/20 position fuse configuration 10 Amp max per fuse Standard PWX-031RGCSD20PWDP
Total front access fuse panels
Dual power feed, Wire-wrap alarm contact connection, Putty White
10/10 position fuse configuration 20 Amp max per fuse Standard PWX-031FXCSD10PWDP
15 Amp max per fuse Standard PWX-031FGCSD10PWDP
20/20 position fuse configuration 10 Amp max per fuse Standard PWX-031FGCSD20PWDP
Inside Plant – Copper Solutions
Note: Panels ship with dummy fuses installed in all positions, one fused equipment designation card holder and
cards, one voltage designation label, two 2-hole lugs per power bus (accepts 2 AWG stranded wire), two ring lugs
(for grounding), and four sheets of perforated fuse designation cards and six plastic covers.
Ordering Information
Description Shipping Catalog Number
Standard front access fuse panels
•
Ordering Information
Description Shipping Catalog Number
Low voltage disconnect (LVD) fuse panel
4/4-position TPA, dual power feed, LVD Quick Ship PWX-F41RBA4XXYSPHP
Ordering Information
106612AE
16 - X PWX-1LFG4AA
6/09
8 - X PWX-1LFG2AA
4 - X PWX-1LFG1AA
- 8 X X PWX-1LFA2DA
- 8 X X X PWX-1AFA2DA
- 8 X PWX-1LFA2AA
- 8 X X PWX-1AFA2AA
8 4 X X X PWX-1AFM2DA
Other custom configurations available. For more information call ADC at 1-800-366-3891
The Select Series circuit breaker platform can be configured-to-order to meet unique network powering
needs. Select from various single or double pole hydraulic magnetic circuit breaker types and alarm
connectors. Circuit breaker amperages can be mixed within a single panel, allowing maximum flexibility.
The Select Series circuit breaker platform accepts input power up to 100 Amps per bus, and up to 50
Amps per breaker output position.
Hydraulic magnetic circuit breakers provide precise and reliable powering control. The breakers can be
quickly reset to restore power, have customizable trip points (in amperes), and time delays (in seconds).
High-brilliance LEDs allow technicians to quickly identify input power failures or tripped breakers. Other
features include two-post grounding and separate removable INPUT/OUTPUT protector covers.
These panels operate under either positive or negative voltage conditions.
Catalog Number
PWX- __
4 51 __ __ __ __ __ __ __ __ S __ P
Inside Plant – Copper Solutions
Delay
4 Short delay
F 2 25A
Alarm Contact Connection
H 1 1
W Wire-wrap
T 1 3
106612AE
D2 2 36
6/09
R2 2 40
G2 2 50
X N/A BLANK
Note: Panels ship with one designation card holder and card, one voltage designation label, two 2-hole lugs per
input power bus, two ring lugs (for grounding), and rack mounting brackets.
*ADC’s estimated ship time. Specific shipment information, including shipment date and timeframe will be
acknowledged by ADC at time of order.
Ordering Information
Dual bus with 6-position per bus Screw-down 5.25" x 17.12" x 8.89" PWX-061RD6YSTSP
- 4 GMT positions per side terminal (133.3 x 434.8 x 225.8 mm)
Dual bus with 6-position per bus Screw-down 5.25" x 17.12" x 8.89" PWX-061RD6NXXSP-C
- No GMT fuses for output or input terminal (133.3 x 434.8 x 225.8 mm)
Note: Depending on preference for fuses or breakers, either fingerguards or TPC fuse holders need to be ordered
with each panel. Designated cards available.
106612AE
CA1-X0-09-572-A21-MG TPC-20
10 AMP 25 AMP
CA1-X0-09-573-A21-MG TPC-25
6/09
20 AMP 30 AMP
CA1-X0-09-574-A21-MG TPC-30
30 AMP 40 AMP
CA1-X0-09-575-A21-MG TPC-40
40 AMP 50 AMP
CA1-X0-09-576-A21-MG TPC-50
50 AMP 60 AMP
CA1-X0-09-577-A21-MG TPC-60
60 AMP 75 AMP
CA1-X0-09-578-A21-MG TPC-75
75 AMP 90 AMP TPC-90
90 AMP CA1-X0-09-634-A21-MG 100 AMP TPC-100
100 AMP CA1-X0-09-635-A21-MG 125AMP TPC-125
TPC Fuse Holder TPCDS-BBE-2
Ordering Information
Compression lug; ships two per pack Catalog Number
Next Gen Network Solutions
2 AWG CL-02M
4 AWG CL-04M
6 AWG CL-06M
14 AWG CL-14M
Ordering Information
KLM fuses - non-indicator Catalog Number
Next Gen Network Solutions
5 Amps KLM-05
10 Amps KLM-10
15 Amps KLM-15
20 Amps KLM-20
25 Amps KLM-25
30 Amps KLM-30
KLM Dummy KLM DUMMY
1
All KLM fuse modules house a fuse alarm indicating red LED.
20 Amps TPA-20
25 Amps TPA-25
30 Amps TPA-30
40 Amps TPA-40
50 Amps TPA-50
•
6/09
Ordering Information
Description Catalog Number
Carling breakers
Next Gen Network Solutions
1 AMP CA1-X0-09-571-A21-MG
10 AMP CA1-X0-09-572-A21-MG
20 AMP CA1-X0-09-573-A21-MG
30 AMP CA1-X0-09-574-A21-MG
40 AMP CA1-X0-09-575-A21-MG
50 AMP CA1-X0-09-576-A21-MG
60 AMP CA1-X0-09-577-A21-MG
75 AMP CA1-X0-09-578-A21-MG
90 AMP CA1-X0-09-634-A21-MG
100 AMP CA1-X0-09-635-A21-MG
TPC fuses/fuse holder
15 AMP TPC-15
20 AMP TPC-20
Inside Plant – Copper Solutions
25 AMP TPC-25
30 AMP TPC-30
40 AMP TPC-40
50 AMP TPC-50
60 AMP TPC-60
75 AMP TPC-75
90 AMP TPC-90
100 AMP TPC-100
125 AMP TPC-125
106612AE
ADC offers many varieties of DS1 products to ensure that the right features are available for your
specific cross-connect or interconnect needs. From the fixed-circuit DSXi® panels to the modular
FlexDSX® panels, all DS1 panels are proven performers that have set the industry standard. The modular
systems minimize initial network costs by growing the network as customer demand increases. All are
backed by ADC’s quality manufacturing and dedicated sales and service team to help keep networks
running smoothly.
Next Gen Network Solutions
LED
Network Tracer Network
Element A FlexDSX Wire FlexDSX Element B
MON MON
M
OUT X-OUT X-OUT OUT
Tx OUT O Tx OUT
OUT OUT
IN IN IN I IN
Rx IN X-IN X-IN Rx IN
MON
106612AE
Test
Box
FlexDSXi Application
•
Network Network
Element A DSX-1 DSX-1 Element B
6/09
MON MON
M
OUT X-OUT X-OUT OUT
Tx OUT O Tx OUT
OUT Out
IN IN IN I IN
Rx IN X-IN X-IN Rx IN
Cross-
Equipment Connect Equipment
Cable Jumper Cable
DSXi Application
Features
• Increased density
Up to 27 percent greater bay density, saving
valuable floor space.
• Innovative design
Easier circuit access and faster identification
to help save time and money.
• Ingenious cable management
Ensures cables are kept well organized.
• Incredibly reliable panels
Designed to comply with NEBS Level 3
standards and backed by a lifetime warranty.
• Brighter LED
• Improved designation
Inside Plant – Copper Solutions
106612AE
•
6/09
Features
• Improved circuit density by 20 percent with
4-inch-high panels
• Two 4-inch by 4-inch vertical jumper rings
Di-G2CU1
• WECO/EIA mounting brackets (Front View)
Next Gen Network Solutions
• C
ircuit identification cards with major
circuits bolded
• Red tracer LEDs for easier circuit identification
• Panel color: putty
Ordering Information
Features
• Two 4-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
circuits bolded
• WECO/EIA mounting brackets
Next Gen Network Solutions
Ordering Information
106612AE
•
6/09
Features
• Two 4-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
circuits bolded
• WECO/EIA mounting brackets Di-A2GU1
Next Gen Network Solutions
(Front View)
• Red tracer LEDs for easier circuit identification
• Panel color: putty
Ordering Information
Features
• Increased circuit density by 14 percent with
6-inch-high panels
• Two 2-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
Next Gen Network Solutions
Di-M2GU1
circuits bolded (Front View)
• WECO/EIA mounting brackets
• Red tracer LEDs for easier circuit identification
• F ront cross-connect and network equipment
cable interface
• Panel color: putty
Ordering Information
Features
• Increased circuit density by 20 percent with
4-inch-high panels
• Two 2-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
Next Gen Network Solutions
Di-K2GU1
circuits bolded (Front View)
• WECO/EIA mounting brackets
• Red tracer LEDs for easier circuit identification
• Panel color: putty
Ordering Information
Features 4"
circuits bolded
• WECO/EIA mounting brackets
• Red tracer LEDs for easier circuit identification
• Panel color: putty
Ordering Information
Features
• Increased circuit density by 14 percent with
6-inch-high panels
• Two 2-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
Next Gen Network Solutions
Ordering Information
Features
• Two 2-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
Di-W2GU1
circuits bolded
(Front View)
• WECO/EIA mounting brackets
Next Gen Network Solutions
Features
• Two 2-inch by 4-inch vertical jumper rings
• C
ircuit identification cards with major
circuits bolded Di-U2GU1
106612AE
Ordering Information
6/09
35
Features
• A
ccommodates rear cross-connect style
RESERVE FOR
MISCELLANEOUS APPLICATION
30
DSXi® panels
• Increased density with up to 1,176 25
jumper rings
• Bay color: putty
10
381 mm
658 mm (15")
(25.9") Footprint
DMB-77WC01
(Front View)
Ordering Information
Rear cross-connect bay, fully loaded with 2.14 m x 584 mm x 381 mm DMB-72WC02
14 Di-G2GU1 panels (7' x 23" x 15")
Rear cross-connect bay, fully loaded with 2.14 m x 584 mm x 381 mm DMB-72WC01
14 Di-G2CU1 panels (7' x 23" x 15")
•
6/09
Features
• Accommodates front cross-connect style
DSXi® panels
• Increased density with up to 784 terminations
in a single 19-inch bay; 1,176 terminations in
Next Gen Network Solutions
a 23-inch bay
• WECO network-style racks
• E quipped with fuse panel, upper and lower 2.14 m
(7')
horizontal jumper troughs, and vertical
jumper rings
• Bay color: putty
658 mm 381 mm
(25.9") (15")
DMB-78WC01
(Front View)
Inside Plant – Copper Solutions
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
19" bay
Front cross-connect bay, fully loaded with 2.14 m x 584 mm x 381 mm DMB-71WC01
14 Di-M2CU1 panels (7' x 23" x 15")
•
6/09
64 mm
(2.5")
Next Gen Network Solutions
2.14 m
(7')
2.14 m
(7')
381 mm 127 mm
(15") (5")
381 mm
(15")
Open guard box for raised floors– 2.14 m x 64 mm (7' x 2.5") RAC-7C0633
equipment cables enter from below 2.14 m x 120 mm (7' x 5") RAC-7C0639
2.14 m x 191 mm (7' x 7.5") RAC-7C0811
2.14 m x 254 mm (7' x 10") RAC-7C0645
Universal end guard panel 2.14 m (7') RAC-7B0162
Note: color is putty.
•
6/09
Ordering Information
Description Dimensions (HxW) Catalog Number
AC raceway
With outlet (2 per rack where outlets are required) ACOK-PWNB
Without outlet (2 per rack where outlets are not required) ACB-PWNB
AC raceway filler
Inside Plant – Copper Solutions
Features
• Rear cross-connect
• A
ll chassis are fully loaded with four-port
jack cards
• Circuit identification labels
Next Gen Network Solutions
Ordering Information
Dimensions Mounting
Terminations Designation (HxWxD) Options Catalog Number
84 1-84 102 mm x 582 mm x 254 mm Flush DFX-100084-R
(4" x 23" x 10")
Ordering Information
Dimensions Mounting Catalog
Cross-Connect Terminations Designation (HxWxD) Options Number
Front 84 1-84 152 mm x 582 mm x 152 mm Flush DFX-100084
(6" x 23" x 6")
•
Features
• A
ll chassis are fully loaded with four-port
jack cards
• Circuit identification labels
• Two 4-inch by 5-inch vertical jumper rings
Next Gen Network Solutions
Ordering Information
Dimensions Mounting Catalog
Cross-Connect Terminations Designation (HxWxD) Options Number
Front 64 1-64 152 mm x 483 mm x 152 mm Flush DFX-100064*
(6" x 19" x 6")
*Accommodates 19" and 23" rack mount.
Features
• A
ll chassis are fully loaded with four-port
jack cards
• Circuit identification labels
• Two 4-inch by 5-inch vertical jumper rings
Next Gen Network Solutions
DFX-100056
• Tracer LEDs for fast circuit identification
(Front View)
• Chassis color: putty
Ordering Information
Dimensions Mounting Catalog
Cross-Connect Terminations Designation (HxWxD) Options Number
Front 56 1-56 152 mm x 483 mm x 152 mm Flush DFX-100056*
(6" x 19" x 6")
*Accommodates 19" and 23" rack mount.
Upper Cable
Trough
FlexDSX skeleton bays can be ordered in front
®
Position 8
15 Position 4
Features Position 3
10
• A
ccommodates both the front and rear Position 2
Lower
Cable Cable
cross-connect style FlexDSX chassis Position 1 Trough
114 mm 5
• 23-inch WECO network-style rack (4.50")
Ordering Information
Dimensions Catalog
Description (HxWxD) Number
23" bays
Front cross-connect skeleton bay, empty 2.14 m x 584 mm x 305 mm DFX-B7S001
Acccomodates up to (10) 152 mm (6") high chassis; (7' x 23" x 12")
840 terminations
Front cross-connect bay, fully loaded with 2.14 m x 584 mm x 305 mm DFX-B7C002
10 DFX-100084 panels (7' x 23" x 12")
106612AE
64 mm
(2.5")
Next Gen Network Solutions
2.14 m
(7')
381 mm
(15")
Ordering Information
Description Dimensions (HxW) Catalog Number
AC raceway
With outlet (2 per rack where outlets are required) ACOK-PWNB
Without outlet (2 per rack where outlets are not required) ACB-PWNB
Inside Plant – Copper Solutions
AC raceway filler
64 mm (2.5"); (2 per 2.5" filler panel) AC-PWNB-RS2.5
127 mm (5"); (2 per 5" filler panel) AC-PWNB-RS5
254 mm (10"); (2 per 10" filler panel) AC-PWNB-RS10
Blank panels
WECO 51 mm x 584 mm (2" x 23") PWBP-2023
102 mm x 584 mm (4" x 23") PWBP-4023
152 mm x 584 mm (6" x 23") PWBP-6023
203 mm x 584 mm (8" x 23") PWBP-8023
EIA 45 mm x 584 mm (1.75" x 23") PWBP-1723
106612AE
Features
• 1
512 jacks per 7' bay uses an efficient jack count of
84 jacks per panel. Dual monitoring of the out and in
ports, panel termination count matches digital switching
Broadband equipment for simplified network engineering.
Next Gen Network Solutions
Ordering Information
Jacks Per # of # of Tie Pair
Description Panel Terminations Circuits Catalog Number
Concentration bays, 2.14 m (7')
•
Ordering Information
Description Catalog Number
AC outlet kit; accepts outlet kits in front only, North American ACOK-PWNB
End guards; 2.14 m (7') height x 298 mm (18.75") width SHD-HR-85
Installation kits
Next Gen Network Solutions
106612AE
•
6/09
Features
• D
S1 module Features front wire-wrap
cross-connects and rear wire-wrap equipment
cable interface
• D
S3 module Features rear BNC cross-connect
and equipment cable interfaces Chassis with DS1 Modules
• T racer LEDs eliminate manual tracing of cross-
connect wires for fast circuit identification
• Chassis and module color: putty
Modules
DS1 module; mounts into 28 – D1M-1A0042
D1M-1X0012 chassis;
1-14, 15-28 designation
DS3 module; mounts into 4 midsize – D3M-XRMC11
D1M-1X0012 chassis; 1-4 designation jacks
DS3 module; mounts into 4 – D3M-XRSC11
D1M-1X0012 chassis; 1-4 designation standard
•
size jacks
6/09
* Chassis has three total module positions. One 28-termination module is included. The two additional modules
are ordered separately.
Features
• C
hassis is preloaded with 56 individual
interconnect jack cards
Next Gen Network Solutions
Ordering Information
Circuit Number of Dimensions Mounting
Density Terminations Designation (HxWxD) Options Catalog Number
56 112 1-56 A 127 mm x 584 mm x 203 mm Flush D1M-1E1101
1-56 Z (5" x 23" x 8")
DD1-351001
(Front View with
Door Closed)
DD1-351001
106612AE
Ordering Information
Cable Cable Cable
Number of Connections Connections Termination Mounting Dimensions Catalog
Circuits DCS IN/OUT NE IN/OUT Access Options (HxWxD) Number
84 Wire-wrap Wire-wrap Rear Flush or 2" 152 mm x 584 mm DD1-351001
•
recess x 213 mm
WECO/EIA (6" x 23" x 8.4")
6/09
DD1-311001 DD1-311001
(Front View with Door Open) (Front View with Door Closed)
Ordering Information
Cable Cable Cable
Number Connections Connections Termination Mounting Dimensions Catalog
of Circuits DCS IN/OUT NE IN/OUT Access Options (HxWxD) Number
56 Wire-wrap Wire-wrap Rear Flush or 66 mm x 584 mm x DD1-311001
51 mm (2") 203 mm
recess (2.6" x 23" x 8")
WECO/EIA
56 Wire-wrap Wire-wrap Rear 121 mm 76 mm x 482 mm x DD1-211001
(4.75") 292 mm
recess (3" x 19" x 11.5")
Ordering Information
Description Catalog Number
Loopback card; provides loopback of transmit to receive for both the NE and DCS DD1-100002
equipment
Terminating card; provides 135 Ohm termination across tip and ring for transmit and DD1-100003
receive of both NE and DCS equipment
Opening card; provides opening of transmission path between NE and DCS (isolates NE DD1-100004
from DCS for continuity testing during installation)
Jack access card; provides MON, OUT and IN jacks for circuit access to NE equipment and DD1-100005
provides MON, OUT and IN jacks for circuit access to DCS equipment
Drop and insert card; provides MON, OUT and IN jacks for both the NE and DCS DD1-100006
equipment for full duplex circuit access. This provides dual access functionality in
the single access chassis
Circuit guard card; provides circuit guard with red label for a single mounting slot DD1-100008
within the chassis. This prevents insertion of an access card for high priority circuits
Inside Plant – Copper Solutions
Monitor only card; provides MON jack for circuit access to the NE equipment transmit DD1-100012
and provides MON jack for circuit access to the DCS equipment transmit when the card is
inverted
DSO access card; provides jack access to voice frequency circuits when DDP-1 chassis is DD1-100020
used in special analog applications
Start-up kit; kit consists of: DD1-100025
(28) Loopback, (4) Terminating, (4) Opening, (28) Jack access, (4) Monitor only cards
Module extractor tool; used to extract DDP-1 card from its mounting slot in the chassis DD1-000001
106612AE
•
6/09
Features
• Color-coded wire-wrap terminals
• Wire fanning strips located below terminals
• Flush or 2-inch recess mounting available DSX-CAP-BEST
(Front View)
Next Gen Network Solutions
Ordering Information
Dimensions Jumper
Circuit Density Designation (HxW) Rings Color Catalog Number
100 5-wire 1-100 102 mm x 584 mm 102 mm x 102 mm Putty DSX-CAP-BEST
terminations, (4" x 23") (4" x 4")
with LED cable rings
200 5-wire 1-50A, 1-50B, 102 mm x 584 mm 102 mm x 102 mm Putty DSX-CAP-D-PWT-4CR
terminations 1-50C, 1-50D (4" x 23") (4" x 4")
Features
• Bantam jack terminations
• Rear wire-wrap terminals
• Red tracer LEDs
Next Gen Network Solutions
Ordering Information
Circuit Number of Dimensions Mounting Catalog
Density Termination (HxWxD) Options Number
25 Left 50 89 mm x 483 mm x 203 mm Flush DSX-IB-19
25 Right (3.5" x 19" x 8")
25 Left 50 102 mm x 483 or 584 mm x 203 mm Flush, DSX-IB-23A
25 Right (4" x 19 or 23" x 8") 102 mm x 127 mm
(4", 5") recess
28 Left 56 89 mm x 584 mm x 203 mm Flush DSX-IB-23B
28 Right (3.5" x 23" x 8")
Inside Plant – Copper Solutions
106612AE
•
6/09
Primarily used to power LEDs in DSX modules, fuse panels are also used to power auxiliary equipment
and communication panels.
Features
• NEBS Level 3, UL, NEC 1999 and CSA compliant • Field-replaceable, high-brilliance red LEDs ensure
Next Gen Network Solutions
GMT Fuses
Cable troughs are used for horizontal cable management. Generally two cable troughs are required,
one at the top and one at the bottom of each rack.
Next Gen Network Solutions
DSX-CT-23H AUX-2D0025
(Figure 1) (Figure 2)
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
Horizontal cable trough 203 mm x 584 mm x 203 mm AUX-2D0010
Rounded bottom edges ensure proper cable bend (8" x 23" x 8")
radius (see figure 1) 127 mm x 584 mm x 203 mm AUX-2D5010
(7" x 23" x 8")
152 mm x 584 mm x 203 mm AUX-2D0009
(6" x 23" x 8")
Inside Plant – Copper Solutions
23" mounting, use with 254 mm (10") spacing 203 mm x 876 mm x 203 mm AUX-2D0026
106612AE
Features
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Bay Tracer Illuminator
106612AE
COMP-21
(Front View)
Features
• T ouch key access to nine dial lines; lines 8 • H
old, conference, and on-hook key Features for
and/or 9 may be changed to signaling or intercom use with a 1A2 key telephone system
mode by switch setting • J ack access is provided for a 52-type headset or
• A
ny four dial lines or two intercom lines may be equivalent telephone set
conferenced • Y
ellow LED above each line key designates visual
• S upports either Dual Tone Multifrequency (DTMF) circuit status, a green LED lights when the key
or Dial Pulse (DP) signaling is pressed and is extinguished when the key is
pressed a second time.
Inside Plant – Copper Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Communications panel 89 mm x 483 or 584 mm x 127 mm COMP-21
Touch key access to 9 dial lines (POTS or 1A2 key (3.5" x 19 or 23" x 5")
telephone) or 7 dial lines and any combination of
2 office intercom and signal lines along with hold,
conferencing and on-hook features; access to dial
and intercom lines is via jack connected to 52-type
headset or equivalent telephone set; comes with
reversible mounting ears for 19" or 23" (483 mm
or 584 mm) racks.
106612AE
Ordering Information
Description Catalog Number
Headsets and Handsets
Next Gen Network Solutions
Headset for communications panel with 3.66 m (12') coil cord COMP-HDS
Handset for communications panel with 2.75 m (9') coil cord COMP-HNDSKIT
Handset/headset holder mounts to equipment rack COMP-HNR-P
Remote headset jack box HSE-100001
Cable assembly
Allows daisy chaining COMP-11, 21, 31 to older 660 style communications panels COMP-CNVN CORD
Allows daisy chaining COMP-11, 21, 31 to Porta type 925 communications panels COMP-CNVN PORTA
Writing Shelves
Retractable writing shelves provide a writing
surface during maintenance activities. The shelves
are usually mounted at arm level on the bay for
RWS23
Ordering Information
Ordering Information
Description Length Catalog Number*
Three-conductor single .3 m (1') PJ712
.92 m (3') PJ716
1.83 m (6') PJ722
3.05 m (10') PJ1210
3.66 m (12') PJ1212
4.58 m (15') PJ1415
Inside Plant – Copper Solutions
*For nickel-plated patch cords, add the suffix "N". For plenum-rated fire retardant patch cords, add the suffix "PL".
Ordering Information
Description Catalog Number
Accessory kit 1 includes: ACK-1
1 600 Ohm terminating plug (PJ743)
4 135 Ohm terminating plug (PJ744)
1 900 Ohm terminating plug (PJ749)
10 Single red circuit guard (PJ925R)
3 1.2 m (4') single patch cord (PJ718)
3 1.2 m (4') dual patch cord (PJ768)
2 1.8 m (6') single patch cord (PJ722)
Ordering Information
Description Catalog Number
Standard size kit includes: ACK-CEV-1
28 1.8 m (6') bantam dual patch cords
2 3.0 m (10') bantam single conversion patch cords
10 1.8 m (6') bantam single patch cords
4 100 Ohm bantam terminating plugs
10 Bantam looping plugs
5 Red flashing LEDs
Inside Plant – Copper Solutions
Ordering Information
Description Catalog Number
Terminating plugs
100 Ohm (actual resistor value: 100 Ohm, 1%) PJ800
135 Ohm (actual resistor value: 135 Ohm, 1%) PJ744
Next Gen Network Solutions
Ordering Information
Description Length Catalog Number
Alligator patch cord; 1.83 m (6') CCCDSMB02
(2) alligator clips to single three-conductor bantam plug 2.44 m (8') CCCDSMB03
3.05 m (10') CCCDSMB04
Next Gen Network Solutions
style plug
3.66 m (12') PAT-100094
Dual bantam plug to dual AT&T 800-style plug patch cord; .915 m (3') PAT-100096
three-conductor dual bantam plug to three-conductor dual AT&T 1.83 m (6') PAT-100097
800-style plug
3.66 m (12') PAT-100098
106612AE
•
6/09
66.68 mm
(2.625")
Ordering Information
Description Length Catalog Number
Single conversion 1.83 m (6') PJ946
3.66 m (12') PJ952
6.10 m (20') PJ1920
7.63 m (25') PJ1925
9.15 m (30') PJ1930
Dual conversion 2.44 m (8') PJ694
3.66 m (12') PJ696
Cross-Connect Wire
Cross-connect wire is used to connect DSX jacks
together by completing a patch between two
cross-connect points. The five-conductor wire is
24 AWG solid tinned copper.
Next Gen Network Solutions
Color-code
• P air number one is blue paired with a white
band marker
• P air number two is orange paired with a
white band marker
Cross-Connect Wire
• F ifth conductor is green and used for LED
tracer identification
Ordering Information
Description Catalog Number
Cross-connect wire
152 m (500') roll DSX-CCW/500
Inside Plant – Copper Solutions
Di-FLEDR
Ordering Information
Description Catalog Number
Straight leads – 48 Vdc
Red FLEDR
Green FLEDG
Yellow FLEDY
Orange FLEDO
Bent leads – 48 Vdc
Red FLEDR1
Green FLEDG1
Yellow FLEDY1
Orange FLEDO1
Introduction
The rear cross-connect modular product (DSX-4R)
is a total system solution with increased density
and complete modularity using midsize jacks
also known as mini-WECO/440 jacks/coaxial jacks.
The 4-inch-high chassis contains up to 32 circuit
Next Gen Network Solutions
Modules
DSX-4R modules are designed to fit into DSX-4R rear cross-connect chassis. These DSX-4R modules
have rear BNC connectors staggered in high and low positions across the chassis to obtain the
ultimate in system density.
Next Gen Network Solutions
Ordering Information
Description Catalog Number
DSX-4R modules in odd chassis positions (BNC high)
Order individual modules for appropriate odd or even chassis positions. Odd chassis positions; i.e., 1, 3, 5
accept modules with high BNCs. Even chassis positions; i.e., 2, 4, 6 accept modules with low BNCs.
BNC insertion/withdrawal tool (BT2000-12 on page 304) is recommended to install and remove BNC connectors
because of extremely high density.
106612AE
•
6/09
Features
• C
hassis capacity: 32 or 24 DSX-4R rear
cross-connect modules in 19-inch chassis;
Next Gen Network Solutions
Ordering Information
Chassis with Front LED Chassis with Front and Rear LED
Description Catalog Number Catalog Number
Inside Plant – Copper Solutions
36-termination
24-termination
Three-port module DSX4R-24MB30-C24 DSX4R-24MB30-D24
Four-port module DSX4R-24MB40-C24 DSX4R-24MB40-D24
Six-port module DSX4R-24MB60-C24 DSX4R-24MB60-D24
Jumper rings are sold separately. For jumper ring kit, see catalog number AUX-0X0439 on page 284.
BNC insertion/withdrawal tool (BT2000-12 on page 304) is recommended to install and remove BNC connectors.
•
6/09
DSX4R-D36
(Front View) (Rear View)
Ordering Information
Chassis with Front LED Chassis with Front and Rear LED
Module Type Catalog Number Catalog Number
Unloaded chassis
36-position 584 mm (23") DSX4R-C36 DSX4R-D36
Ordering Information
Chassis with Front LED Chassis with Front and Rear LED
Description Catalog Number Catalog Number
Preterminated chassis
36-position 584 mm (23") DSX4R-36B0-C36 DSX4R-36B0-D36
Inside Plant – Copper Solutions
Jack Kits
Jack kits are used with the DSX-4R preterminated
chassis. When service turnup is required, a jack kit
106612AE
Ordering Information
Description Catalog Number
•
Jack kits
6/09
Skeleton Bay
Skeleton bays are pre-assembled and include the
fuse panel, cable management rings, upper and
lower troughs. They can be equipped with up to
fourteen rear cross-connect chassis (not included)
or chassis positions may be substituted with
Next Gen Network Solutions
D3B-107500
(Front View)
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
23" bay, rear cross-connect, empty 2.14 m x 584 mm x 381 mm D3B-107500
Accommodates up to fourteen 102 mm (4") – high (7' x 23" x 15")
(DSX-4R) chassis; maximum 504 terminations. Includes
Introduction
As demand for bandwidth increases, networks are required to be more versatile and powerful than
ever before. To keep pace with what sometimes seems like daily changes in technology and complex
customer demands, the network must be completely reliable and flexible.
The miniature coaxial technology, developed by ADC, is ideal for voice, data or video networks and
Next Gen Network Solutions
offers twice the density of traditional DS3 products. This high-density system maintains high quality
standards while increasing system capacity and requiring far less floor space than conventional products.
The miniature technology is deployed in large or rapidly growing offices, as well as for locations with
limited room for expansion.
The innovative miniature coaxial technology includes three important inventions: a minicoaxial switching
jack (LCJ), a minicoaxial mating plug (LCP) and a minicoaxial connector (LCC). The LCJ is the heart of
the product and performs the switching jack function. The LCP is the interface to the LCJ and allows
patching, monitoring or termination of the network signals. The LCC is field terminated to IN/OUT
equipment cables and then connects to the LCJ’s IN/OUT circuit ports.
The high-density miniature technology was designed with optimal cable management. Cable jumper
rings and troughs ensure neat dressing of the jumpers, and rear cable management guides ensure that
all cables are neatly secured. Despite the product’s high-density, a technician can access all connectors
and add cable when there is additional system growth without disrupting existing signal connections.
Modules
Four-Port
10 mm 121 mm
(.4") (4.75")
O
OUT TL
Cross-Connect
XO
X-OUT (LCC)
Jacks X-IN
(LCP) 118 mm XI
M (4.6") TL
MON TL
I
IN
OUT Equipment
Connections
IN (LCC)
DSX4L-03R
Six-Port
121 mm
10 mm (4.75")
(.4")
DSX4L-04R
Ordering Information
106612AE
Ordering Information
Description Dimensions (HxWxD) Catalog Number
48-termination chassis loaded
with 48 DSX4L-03R modules 152 mm x 584 mm x 324 mm DSX4L-R05C4803
(Four-port module) (6" x 23" x 12.75")
with 48 DSX4L-02R modules 152 mm x 584 mm x 324 mm DSX4L-R05C4802
(Four-port module with loopback) (6" x 23" x 12.75")
Inside Plant – Copper Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
48-termination chassis loaded
with 48 DSX4L-03R modules 152 mm x 584 mm x 254 mm DSX4L-R01C4803
(Four-port module) (6" x 23" x 10")
with 48 DSX4L-02R modules 152 mm x 584 mm x 254 mm DSX4L-R01C4802
(Four-port module with loopback) (6" x 23" x 10")
(23")
ordered separately. 254 mm or 324 mm
(10"or 12.75")
Ordering Information
Description Dimensions (HxWxD) Catalog Number
48-position unloaded chassis
For 381 mm (15") deep rack 152 mm x 584 mm x 324 mm DSX4L-R05C
(6" x 23" x 12.75")
For 305 mm (12") deep rack 152 mm x 584 mm x 254 mm DSX4L-R01C
(6" x 23" x 10")
Inside Plant – Copper Solutions
106612AE
•
6/09
35
miscellaneous and maintenance type equipment
(such as bridging office repeaters, a cross aisle Chassis
Position 10
panel, an interbay patch panel, an equipment
30 Chassis
shelf for portable test set, a communications Position 9
Chassis
2.14 m 20 Position 6
(7')
Chassis
Position 5
15 Chassis
Position 4
Chassis
Position 3
10
Chassis
Position 2
114 mm
(4.5’)
381 mm
D3B-1E9197 (15")
(Front View) (Side View)
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
106612AE
Skeleton bays include all cable management hardware but no chassis. Add chassis and modules as needed.
•
6/09
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
48-termination chassis loaded
with 48 DSX4L-13F modules 222 mm x 584 mm x 299 mm DSX4L-F02C4813
(Four-port module) (8.75" x 23" x 10")
with 48 DSX4L-12F modules 222 mm x 584 mm x 299 mm DSX4L-F02C4812
(Four-port module with loopback) (8.75" x 23" x 10")
Inside Plant – Copper Solutions
(11.75")
DSX4L-F02C
6/09
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
48-position unloaded chassis 222 mm x 584 mm x 299 mm DSX4L-F02C
(8.75" x 23" x 11.75")
35
shelf for portable test set, a communications
panel, pencil storage drawers, etc). Using Chassis Position 6
735 dual coaxial cable for cross-connect cable 30
is recommended.
Chassis Position 5
25
2.14 m
(7') Chassis Position 4
20
Chassis Position 3
15
Chassis Position 2
10
121 mm
(4.75")
(Front View) 3
D3B-1D8001 (Side
Ordering Information
Dimensions
106612AE
Skeleton bays include all cable management hardware but no chassis. Add chassis and modules as needed.
6/09
Introduction
The DSX-4K was designed with increased density and functionality over the standard DSX front
cross-connect products. The front interface includes dual, nonintrusive monitor ports which save
technicians time by allowing bidirectional monitoring of a circuit from a single test access point. The
adjustable BNC connector on the backplane allows the connections to be located closer together
for higher density. This system slides and locks the BNC connector into position and maintains easy
Next Gen Network Solutions
network cabling access. And with these close tolerances, the DSX-4K maintains signal isolation
between adjacent modules. The front cross-connect panel provides the density and flexibility
needed in networks requiring front-access solutions.
Modules
Chassis
Cut-out Mounting Allows Chassis Removal
36 Terminations Without Removing Jumper Rings
Flush Rack
Mounting
106612AE
Flip-down
Designation Door Front View Rear View
•
Cable Management
6/09
Features
• C
hassis capacity: 36 or 24 DSX-4KT front
Next Gen Network Solutions
Ordering Information
Dimensions
*Includes one pair of jumper rings and two rear cable support bars.
**Includes two rear cable support bars.
6/09
***Includes 483/584 mm (19"/23") extender brackets to allow mounting in 584 mm (23") racks.
recommended. 20
2.14 m Chassis Position 5
(7’)
Chassis Position 4
15
Chassis Position 3
10
Chassis Position 2
5 Chassis Position 1
203 mm (8")
Inside Plant – Copper Solutions
(Front View)
D3B-105010
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
23" bay for 36-termination chassis 2.14 m x 584 mm x 381 mm D3B-105010
Accommodates up to nine DSX-4K chassis; (7' x 23" x 15")
324-termination
Includes cable management rings, bars, cable trough and
106612AE
Modules
The RZX-3 interconnect products are designed for
customer premises minimum point of presence
applications for interconnection of DS3 (44.736
Mbps), STS-1 (51.84 Mbps), DS4 (274.176
Mbps) or STS-3 (155.52 Mbps) service. The
Next Gen Network Solutions
Features
Ordering Information
Description Catalog Number
Six-port module (A, Z port stenciling)
106612AE
Unloaded Chassis
102 mm
(4")
Next Gen Network Solutions
483 mm
(19") Without 305 mm (12") to
Adapters 381 mm (15")
584 mm Adjustable
(23") With Depth
ICM4R-E32 Adapters
(Front View)
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
Unloaded all rear cabling chassis
Rack mount; WECO/EIA mounting
36-position 102 mm x 584 mm x 305 mm ICM4R-E36
(4" x 23" x 12")
32-position 102 mm x 483/584 mm x 305 mm ICM4R-E32
Inside Plant – Copper Solutions
Modules
The Mini DSX-3 interconnect products are
designed for customer premises minimum point
of presence applications for interconnection of
DS3 (44.736 Mbps), STS-1 (51.84 Mbps), DS4
(274.176 Mbps) or STS-3 (155.52 Mbps) service.
Next Gen Network Solutions
Features
Unloaded Chassis
584 mm
(23")
152 mm
(6") 483 mm
(19")
Next Gen Network Solutions
584 mm
(23") 44 mm
254 mm (1.75")
(10")
ICM4L-R01C ICM4L-R21C
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
Unloaded all rear cabling chassis
Rack mount; WECO/EIA mounting
48-position 152 mm x 584 mm x 254 mm ICM4L-R01C
(6" x 23" x 10")
36-position 152 mm x 483 mm x 254 mm ICM4L-R11C
(6" x 19" x 10")
Inside Plant – Copper Solutions
Wall box
Next Gen Network Solutions
254 mm
(10")
51 mm
254 mm (2")
51 mm
(10")
(2")
356 mm
(14")
(doors open)
ICM4L-04RWM
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Modules
The Mini DSX-3 interconnect products are
designed for customer premises minimum point
of presence applications for interconnection
of DS3 (45 Mbps), STS-1 (51.84 Mbps), DS4
(274.176 Mbps) or STS-3 (155.52 Mbps) service.
Next Gen Network Solutions
Features
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Six-port modules
All front cabling six-port module 178 x 10 mm x 114 mm ICM4L-01F
(A, Z port stenciling) (7" x .4" x 4.5")
Front/rear cabling six-port module 178 mm x 10 mm x 114 mm ICM4L-02F
(A, Z port stenciling) (7" x .4" x 4.5")
106612AE
•
6/09
Chassis
Unloaded chassis are available for 15" WECO/EIA 222 mm
mounting, and wall mount applications. Cable (8.75")
management rings are provided with the skeleton
bay. When ordering individual chassis, ICM-4L
Next Gen Network Solutions
584 mm
(23")
299 mm
(11.75")
ICM4L-F01C
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
Unloaded front/rear cabling chassis
Rack mount; WECO/EIA mounting
48-position 222 mm x 584 mm x 299 mm ICM4L-F01C
(8.75" x 23" x 11.75")
36-position 222 mm x 483 mm x 299 mm ICM4L-F11C
Wall box
432 mm
117 mm (17")
320 mm (doors open)
(4.6") (13")
Next Gen Network Solutions
254 mm
(10")
ICM4L-04FWM
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Wall mount chassis with locking covers
Inside Plant – Copper Solutions
MPOP-2 Series
The MPOP DSX products are designed for
customer premises minimum point of presence
applications for interconnection of DS3 (44.736
Mbps), DS4 (274.176 Mbps), STS-1 (51.84 Mbps)
or STS-3 (155.52 Mbps) service. The module
Next Gen Network Solutions
Features
Ordering Information
Description Dimensions (HxWxD) Catalog Number
106612AE
Features
• Each horizontally mounted two-circuit module • BNC connectors on rear for IN/OUT
interconnects four network elements equipment cabling
(two DS3 circuits) • Three DS3 MPOP-RAH series modules mount
• S tandard or midsize (mini-WECO) switching in one 19- or 23-inch rack mount chassis
coax jacks on front for testing, patching and • Chassis supports flush, two- or four-inch
monitoring (monitor ports off the OUT jacks) recess mounting
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Rear access DS3 module
Standard size coax jacks, 42 mm x 144 mm x 83 mm DS-3 MPOP-RAH
Inside Plant – Copper Solutions
DS-3 MPOP-FA-19
(Rack Mount Chassis)
Next Gen Network Solutions
DS-3 MPOP-FA-23
(Rack Mount Chassis)
DS-3 MPOP-WM
(Wall Mount Chassis) DS-3 MPOP-FA
(Module)
Features
• Each module interconnects two network elements • BNC connectors on front for IN/OUT
Ordering Information
Description Dimensions (HxWxD) Catalog Number
106612AE
Ordering Information
Description Dimensions Catalog Number
Secure wall mount box 346 mm x 406 mm x 131 mm
Next Gen Network Solutions
106612AE
•
6/09
2.14 m
(7')
2.14 m
(7')
Closed guard box for concrete floors– 2.14 m x 120 mm (7' x 5") RAC-7C0256 RAC-7C0381
equipment cables enter from overhead 2.14 m x 254 mm (7' x 10") RAC-7C0370 RAC-7C0382
Open guard box for raised floors– 2.14 m x 120 mm (7' x 5") RAC-7C0556 RAC-7C0555
equipment cables enter from below 2.14 m x 254 mm (7' x 10") RAC-7C0565 RAC-7C0566
Universal end guard panel 2.14 m (7') UEGP-7PW RAC-7B0162
Jumper ring kit includes two jumper ring weldments
Used with DSX-4R rear cross-connect 102 mm x 152 mm x 108 mm DSX-4J-CBL-1 –
•
Ordering Information
Description Dimensions (HxW) Catalog Number
AC raceway
With outlet (2 per rack where outlets are required) ACOK-PWNB
Without outlet (2 per rack where outlets are not required) ACB-PWNB
AC raceway filler
Inside Plant – Copper Solutions
DSX-XA-BB-24S
Ordering Information
Cross-Connect Tie Cable Dimensions
Circuit Density Interface Interface (HxWxD) Catalog Number
24 BNC BNC 102 mm x 584 mm x 127 mm DSX-XA-BB-24L
(4" x 23" x 5")
24 BNC BNC 133 mm x 584 mm x 260 mm DSX-XA-BB-24S
(5.25" x 23" x 10")
24 BNC BNC 102 mm x 584 mmx 305 mm DSX-XA-BB-24R
with LEDs (4" x 23"12")
16 BNC BNC 89 mm x 483/584 x 127 mm DSX-XA-BB-16-PW
(3.5" x 19"/23" x 5")
24** Midsize jacks BNC 152 mm x 343 mm x 254 mm DSX-XA-MB-24/13.5
(mini-WECO) (6" x 13.5" x 10")
Note: Cross aisle panels include tracer pin jacks for cross-connect jumper messenger wire interface. Color is putty.
106612AE
DSX-IB-MB-24
Next Gen Network Solutions
Ordering Information
Tie Cable
Patching Interface Interface Dimensions (HxWxD) Catalog Number
24 midsize (mini-WECO) jacks BNC 45 mm x 483/584 mm x 152 mm DSX-IB-MB-24-T
(1.75" x 19/23" x 6")
24 midsize (mini-WECO) jacks BNC 51 mm x 584 mm x 152 mm DSX-IB-MB-24
(2" x 23" x 6")
24 midsize (mini-WECO) BNC 152 mm x 584 mm x 254 mm DSX-IB-MB-24L
switching jacks with LEDs (6" x 23" x 10")
24 standard-size jacks BNC 51 mm x 584 mm x 152 mm DSX-IB-SB-24
(2" x 23" x 6")
24 circuit LCC 89 mm x 483/584 mm x 211 mm DSX4L-24IB
LCJ patching jacks (3.5" x 19"/23" x 8.3")
Features:
106612AE
• H
ighest Standards – Meets NEBS
Level 3 standards
• H
ighest Density – Up to 16 modules in a
6"H x 23"W chassis
• M
odular System – Flexibility to add
modules as network grows
• C
ompatibility – Chassis design fits into same
DSX-3 bay systems
•
6/09
Dual Repeaters
Next Gen Network Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Dual intraoffice repeater (IOR) with individual alarm disable switch suitable RP3-A20000
for DS3 signal and STS-1 electrical signal
Dual bridging office repeater (BOR) with extended output range suitable RP3-B20000
Inside Plant – Copper Solutions
Note: R
epeater modules can be used in any chassis listed above.
*Heat baffle is recommended between every two 16-position rack mounted repeater chassis
**Repeater modules ordered seperately.
•
6/09
Front View
supports pre-cabling operations in order to
defer cost of repeater module plug-ins until
needed for circuit turn-up.
The repeater chassis is powered from two
separate 48 Vdc office battery power sources.
An onboard DC to DC converter within each
repeater module produces the voltage required
for powering signal regeneration.
Features
• T he 23" chassis holds 16 non-protected
modules, eight pairs of protected modules or
a combination of protected and non-
protected modules.
Ordering Information
Description Dimensions (HxWxD) Catalog Number
106612AE
Features
• 110V AC power input provides convenient RP3-3X0000
means of powering the chassis Front View
• Accommodates up to 4 BOR or PBOR modules
• Lightweight and compact unit has an
ergonomically-designed handle for easy
transport
• P ortable chassis has a cover for protection
of the modules during transport and
provides convenient storage for patch cords,
accessories and the power cord.
Inside Plant – Copper Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
4-position portable bridging office repeater 7.6" x 13.5" x 13"* RP3-3X0000
(19.3 x 34.3 x 33.0 cm)
* With unit cover attached
106612AE
•
6/09
Features
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Rack-mounted chassis with integrated heat baffle 178 mm x 583 mm x 254 mm RP3-2X0000
Supports 24 modules (includes vertical cable guides) (7" x 23" x 10.2")
Wall-mounted chassis 235 mm x 284 mm x 49 mm RP3-2XW001
Supports one module (Includes wall-mount expansion (9.3" x 15" x 1.9")
106612AE
Primarily used to power LEDs in DSX modules, fuse panels are also used to power auxiliary equipment
such as intraoffice and bridging repeaters and communication panels.
Features
• NEBS Level 3, UL, NEC 1999 and CSA compliant • Field-replaceable, high-brilliance red LEDs ensure
Next Gen Network Solutions
GMT Fuses
Inside Plant – Copper Solutions
Ordering Information
Catalog Number with
Description Amperage Fuse Color Catalog Number Pin Identifier
GMT Fuses 3 Blue F-3 P-3
2 Orange F-2 P-2
1-1/3 White F-1 1/3 P-1 1/3
1 Gray F-1 P-1
3/4 Brown F-3/4 P-3/4
106612AE
Cable troughs are used for horizontal cable management. Generally two cable troughs are required,
one at the top and one at the bottom of each rack.
Next Gen Network Solutions
DSX-CT-23H AUX-2D0025
(Figure 1) (Figure 2)
Ordering Information
Dimensions
Description (HxWxD) Catalog Number
Horizontal cable trough 203 mm x 584 mm x 203 mm AUX-2D0010
Rounded bottom edges ensure proper cable bend (8" x 23" x 8")
radius (see figure 1) 127 mm x 584 mm x 203 mm AUX-2D5010
(7" x 23" x 8")
152 mm x 584 mm x 203 mm AUX-2D0009
(6" x 23" x 8")
23" mounting, use with 254 mm (10") spacing 203 mm x 876 mm x 203 mm AUX-2D0026
106612AE
Ordering Information
Description Midsize Standard LCJ
Next Gen Network Solutions
Termination Plugs
Used in many patching applications to maintain
signal termination at 75 Ohm.
Ordering Information
Description Midsize LCP
Inside Plant – Copper Solutions
Ordering Information
Description Catalog Number
75 Ohm BNC connector BNC-TP2 BNC-TP2
106612AE
Looping Cords
Provides a short patch between equipment
transmit (OUT) and receive (IN) during initial
installation and routine testing.
•
Ordering Information
Description Midsize LCP PCH-MMXB-009D
6/09
229 mm ( 9")
PCH-MMXB-009D PCH-DDXC-006D
looping cord
PCH-DDXC-006D
MBNC-3 CP1051MN
Ordering Information
FLEDR FLED-A-RED
Ordering Information
Description Catalog Number
Replacement LEDs
For use in Mini DSX-3 modules (straight leads - 48V)
Red FLEDR
Green FLEDG
Yellow FLEDY
Orange FLEDO
For use in DSX-4R and DSX-4K chassis
Red FLED-A-RED
Green FLED-A-GREEN
Inside Plant – Copper Solutions
Yellow FLED-A-YEL
Orange FLED-A-ORANGE
106612AE
•
6/09
Catalog Number
PCH-__ XB-__ Patch Cords
Next Gen Network Solutions
Ordering Example:
Catalog number PCH-MMXB-012.
3.7 m (12') patch cord with midsize (mini-WECO) plugs on both ends.
Used to patch between different jacks such as DSX-3 jacks to test set jacks
Catalog Number
PCH-__ XB-__
•
Ordering Example:
Catalog number PCH-MSXB-012.
3.7 m (12') patch cord with midsize (mini-WECO) plugs on one end and standard-size plug on the other end.
Factory-Terminated
Factory-terminated jumpers have factory-terminated connectors and tracer pins on both ends.
Next Gen Network Solutions
XCC-BBXB-003 XCC-BBXD-003
Catalog Number
XCC- __ __ X __ - __
Factory-Connector Interface
Type on Second End of Jumper
B Factory-terminated BNC connector
C Factory-terminated LCC connector Coaxial Cable Type
D Dual 735A with tracer messenger wire
Field-Terminated
Connector(s) and tracer pin(s) factory terminated on one
end; connector(s) and tracer pin(s) for other end shipped
unattached for customer termination.
Next Gen Network Solutions
XCC-B1XD-003
Catalog Number
XCC- __ __ X __ - __
wire. (2) BNC connectors and tracer pin factory (4J, 4U, 4H, 4M compatible)
terminated on one end of cable. (2) BNC
connectors and tracer pin shipped unattached
for field termination by customer on other end
of cable.
•
6/09
Factory-Terminated
Connectors and tracer pins are factory-terminated on both ends.
Next Gen Network Solutions
XCC-BBXB-003 XCC-BBXD-003
Catalog Number
XCC- __ __ X __ - __
C LCC connector
035-050 Lengths in 1.52 m (5') increments
(Mini DSX-3, DSX-4L compatible)
Catalog Number
PCH-BXXX-025
PCH- __ __ X __ - __
Messenger Wire
6/09
Ordering Information
Description Catalog Number
DS3 dual cross-connect cable with tracer lead; 304.8 m (1000 ft) 3AC-BDW-1000
Coaxial Connectors
Next Gen Network Solutions
BNC-3 BNC-RA-3
Ordering Information
Cable Dimensions Connector Crimp Quantity: 1
Cable Outer Jack Center
Type Diameter Conductor Sleeve Center Pin* Catalog Number
Straight BNC Connectors
735A 3.2 mm (0.127") 26 gauge 4.5 mm (0.178") 1.10 mm (0.042") BNC-3
0222 3.9 mm (0.155") 24 gauge 5 mm (0.197") 1.10 mm (0.042") BNC-7
Inside Plant – Copper Solutions
*In addition to 1.10 mm (.042") square pin crimp, all connectors listed are compatible with a 12 point method crimp.
Bulk packaging of 100 is available. (Package inludes 100 connector bodies, 100 center pins and 100 crimp sleeves
bagged seperately.
For bulk packaging add "B" to the, end of the catalog number.
Example BNC-1B Quantity per pack=100
Tracer Pins
•
6/09
Ordering Information
Description Catalog Number
Tracer pins
Tracer pin and sleeve - 1 each PGS-110005
Tracer pin and sleeve - 100 piece kit PGS-110006
stripping tool with cassette for 735/0222 cables (STC-13B), stripping tool with cassette
for RG59/734 cables (STC-12B), cable termination tray (LCA-000009), insertion/
withdrawal tool for BNC connector (BT2000-12), carrying case
BT2000-12 WT-2
Ordering Information
Description Catalog Number
Insertion/withdrawal tool for BNC connector
106612AE
LCA-400005-12 LCC-3B
LCA-400004 LCA-600001
Ordering Information
Description Catalog Number
734 Cable Type 735 Cable Type
LCC connectors Resealable plactic connector kit LCC-1 LCC-3
Bulk kits 100 piece kit LCC-1B LCC-3B
Inside Plant – Copper Solutions
Crimp tool Features ergonomic handle for ADC die sets WT-2
Crimp tool Features long ergonomic handle for ADC die sets WT-3
Crimp die sets WD-2
Coaxial cable cutter DSX-3 CCUT
Coaxial cable separator
(used for separating cables in cross-connect jumpers) – STD-10B
LCC tester LCA-414001
Manual stripper tool Includes one stripper replacement cassette STC-12B STC-13B
Manual stripper replacement cassette CCS-BLK
106612AE
Features
• Compact, modular multifunction chassis
provides a point for nonintrusive monitoring,
testing and patching of circuits
• Rack, wall or cabinet mounting
• Multiservice, multimedia
• Provides termination for: Voice, Data, Video,
RF, Fiber, Ethernet, DS1/T1/FT, DS3/T3, Fuse
and Alarm
• Plug-in modules
• 4- and 8-termination DS1 interconnect
Ordering Information
Description Catalog Number
DS1 interconnect modules
For applications in which cross-connect functionality is not required
4-termination – supports 2 T1 circuits
Next Gen Network Solutions
Singlemode FC FPT9-SPFC-S-2M
Singlemode ST ®
FPT9-SPST-S-2M
Singlemode SC FPT9-SPSC-S-2M
Multimode ST with 62.5/125 µm
®
FPT9-MST-B-2M
Ethernet category 5e module
RJ45-RJ45 Category 5e module MFP-242003-8W
Additional configurations available. Please contact ADC Technical Assistance Center.
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Swing-out chassis 89 mm x 439 mm x 267 mm MFP-100000
3-position, swing-out chassis, front and rear access, (3.5" x 17.3" x 10.5")
cable management for twisted pair, fiber and coax,
mounts in 19" (483 mm) or 23" (584 mm) EIA/WECO
racks or wall mount, adjustable flush, 25 mm (1"), 51
mm (2") or 127 mm (5") mounting.
Bulkhead chassis
3-positions 89 mm x 483 mm MFP-110000
(3.5" x 19")
4-positions 89 mm x 584 mm MFP-120000
(3.5" x 23")
Ordering Information
Module Configuration Catalog Number
(Three modules
shown as reference)
Cross-connects – BNC
Equipment – BNC
Catalog Number
0 __ __ __ – __ __ 0
FLD-M __ __
1 2 3 4 5 6
Capacity/Ports Loaded
Splice/Cable Type
Next Gen Network Solutions
6 6 position
Connector Style 0 None
12 12 Position
Multimode 1 Bare Fusion
16 16 Position
9 MMSC 2 Heat Shrink Fusion
24 24-position (LC only)
6 MMLC 3 Mechanical/Mass Fusion
32 32 Position (LC only)
Singlemode
7 SMSC
Pigtail Fiber Type
J SMASC
A Adapters only Color
8 SMLC
P Stranded Pigtails and Adapters B Black
2 ALC
R Ribbon Pigtails and Adapters P Putty
B 50/125 multimode Stub Length (m)*
J 50/125 300 meters 000 No Stub
Stub Type 008 008
153 153
Catalog Number
FLD-V M 0 __
__ __ __ __ __ __ __ __ __ 0 __
0
1 2 3 4 5 6 7 8 9 10
106612AE
•
6/09
Catalog Number
S __ __ __ __ __ __ __ __ __ __ __
FLD-V __ 0
1 2 3 4 5 6 7 8 9 10 11
Catalog Number
D __ __ __ __ __ __ __ __ __ __
FLD-V __ 0
1 2 3 4 5 6 7 8 9 10
KU LC Ultra Polish
Number of circuits per module
KA LC Angle Polish
A One (single circuit)
Singlemode
7U SC Ultra Polish
7A SC Angle Polish
KU LC Ultra Polish
KA LC Angle Polish
106612AE
•
6/09
Catalog Number
C __ __ __ __ __ __ __ __ __ __ __
FLD-V __ 0
1 2 3 4 5 6 7 8 9 10 11
E 1530 nm
D 2
F 1510 nm
E 1
G 1490 nm
H 1470 nm
•
6/09
Features
• Increased modularity
Inside Plant – Copper Solutions
Modules
DS1 module; 1 module width DFX-9T1000
includes 4 jack cards with dual monitor
DS3 module MPOP interconnect; 1 module width DFX-D3000
includes jacks for 2 network elements (IN/OUT)
Fiber module; includes 6 SC adapters 2 module width DFX-SC0002
RJ Cat 5e Ethernet module; 1 module width DFX-9RJ002
includes 3 Cat 5e RJ45 coupler adapters
•
Standard (200/400-Pair)
Inside Plant – Copper Solutions
Ordering Information
Description Catalog Number
19" EIA 1.75" rack spacing
Connectorized panels with rear 50-pin plug connector
400-pair wire-wrap W69F4-0825M
200-pair wire-wrap W39X2-0825M
Non-connectorized panels; 400-pair QCP punch down to QCP punch down Q69F4-0825X
106612AE
DCS Panel
Next Gen Network Solutions
Ordering Information
Description Dimensions (HxW) Catalog Number
Connectorized panel wire-wrap
112-circuit 102 mm x 584 mm (4" x 23") QCP-YDXXA1
448-circuit 152 mm x 584 mm (6" x 23") QCP-YGXXA4
•
Accessories
Next Gen Network Solutions
Accessories
Ordering Information
Description Catalog Number
Tools
Impact tool QB-2
Replacement tip for QB-2 QB-2T
Manual tool (no spring loaded mechanism) Q115
Inside Plant – Copper Solutions
Catalog Number
BAL - __ F __ __ - __
E RJ45
•
6/09
2-Wire Jackfield
Features
4-Wire Jackfield
Features
6-Wire Jackfield
Features
Ordering Information
Description Dimensions (HxWxD) # of Circuits Catalog Number
2-wire jackfield
With primary Line/Drop or Signal E/M 48 JC2/48
With primary Line/Drop or Signal E/M 45 mm x 483 mm x 203 mm 48 JC2/48M
Next Gen Network Solutions
Features
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Voice frequency jackfield 44 mm x 483 mm x 203 mm DMMOJ-1
(1.75" x 19" x 8")
•
6/09
2-Wire Jackfield
Features
4-Wire Jackfield
Features
6-Wire Jackfield
Features
Ordering Information
Description Dimensions (HxWxD) # of Circuits Catalog Number
2-wire jackfield
With primary Line/Drop or Signal E/M 45 mm x 483 mm x 203 mm 48 JB2/48M
plus a third row of monitor jacks (1.75" x 19" x 8")
Next Gen Network Solutions
4-wire jackfield
With Voice Frequency jacks, 24 JB4/24
DEM/MOD, EQ IN/EQ OUT 45 mm x 483 mm x 203 mm
With Voice Frequency jacks, DEM/ (1.75" x 19" x 8") 24 JB4/24M
MOD, EQ IN/EQ OUT, monitor jacks
6-wire jackfield
With monitor and signal E/M jacks 134 mm x 483 mm x 203 mm 48 JB6/48M
(5.25" x 19" x 8")
Inside Plant – Copper Solutions
106612AE
•
6/09
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Panels with wire-wrap terminations
Timing Jackfields
Timing jackfields provide 20 circuits for
Inside Plant – Copper Solutions
Ordering Information
Description Dimensions (HxWxD) # of Circuits Catalog Number
Timing jackfields
106612AE
Unshielded Cables
Unshielded cables are manufactured of solid tinned
copper covered with PVC insulation.
Shielded Cables
Shielded cables are manufactured of solid tinned
copper, covered with PVC insulation. Shielded
cables include an aluminum polyester shielding
ground wire.
Features
Features
• Category 2 cable can transmit data at speeds
up to 4 Mbps
• Category 3 cable is designed for 10BaseT
networks and can transmit data at speeds up
Next Gen Network Solutions
to 10 Mbps
• Category 5 cable can transmit data at speeds
up to 100 Mbps and are ideal for DSL
applications
• Standard cables feature a plug or receptacle
on one end with a plug, receptacle, or stub
on the
opposite end. Connectors are available in 90º
or 180º angles.
Catalog Number
__ __ - __ __ __ __ __ __ - __ __ __
Length in Feet
Inside Plant – Copper Solutions
U Unshielded
XXX 5' increments up to 20'
S Shielded* 25' increments from 20' to 100'
50' increments thereafter
note: 1 foot = 305 mm
Cable Type
R Receptacle P Plug
R Receptacle
First Connector Angle S Stub
A 90º Number of Cable Pairs
C 180º
25 25 Pairs
•
32 32 Pairs
6/09
Features
• Prewired to three, four, five or six 50-pin
connectors
• Horizontal or vertical wiring patterns
• Mount on standard distribution frames with
5" centers (AE frames) and 1.375" x 7.5"
centers (WECO frames)
• Adjustable mounting brackets available for
distribution frames with 8", 8.5", 9" and
9.5" centers
• 8" fanning strip
Features
Depth
• Terminals: nickel silver
• Block and fanning strips: flame retardant
thermoplastic (oxygen index ≥28, UL94-V0)
• Mounting studs: 8-32 steel plated
Next Gen Network Solutions
Width
(per MIL-F-14072 #M262, Type II)
Height
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Wire-wrap terminal blocks; wire-wrap/wire-wrap
4 x 10 pin pattern 45 mm x 64 mm x 44 mm PJ604
(1.75" x 2.5" x 1.75")
6 x 10 pin pattern 57 mm x 64 mm x 44 mm PJ606
(2.25" x 2.5" x 1.75")
8 x 10 pin pattern 70 mm x 64 mm x 44 mm PJ608
(2.75" x 2.5" x 1.75")
10 x 10 pin pattern 83 mm x 64 mm x 44 mm PJ610
(3.25" x 2.5" x 1.75")
Inside Plant – Copper Solutions
Features Depth
106612AE
Height
Width
Ordering Information
Description Dimensions (HxWxD) Catalog Number
Molded terminal block 35 mm x 66 mm 42 mm PJ656
•
Ordering Information
Description Catalog Number
Adjustable bracket kit Mounts ADC connectorized terminal blocks on non-standard BK-310
terminal block mounting dimensions; allow most blocks to use variable mounting centers
of 203 mm (8"), 216 mm (8.5"), 229 mm (9"), and 241 mm (9.5")
Frame and rack mounting accessories
Swivel mounting bracket BK-250-S
8-Position, 2 RU Chassis
Passives: Introduction
The SignalOn® Series, combined with the
innovative cable management of the chassis,
provides engineers with a variety of products to
simplify the RF signal management challenge.
4-Position, 1 RU Chassis
Inside Plant – Copper Solutions
Catalog Number
N - C __ __ __ __ B
Ordering Information
Description Catalog Number
Passive Chassis
20-position chassis, 5 RU, black N-C20VNB
20-position chassis, 5 RU, NEBS N-C20VN-NEBS
•
Catalog Number
N - M __ __ __ __ __ __
combiner M0 0 dB default
C Combiner with M6 6 dB default
pad/monitor Plain Splitter/Combiner Pad and Monitor Module
Configuration Module with Make-Before-Break
S Splitter with pad/ Attenuation
monitor 12 2:1
X Splitter and 14 4:1
combiner with Features
pad/monitor (2 x 18 8:1
• Industry's highest density with standard F
4:1 module only) 32 3 x 2:1* and BNC connectors
24 2 x 4:1* • Industry's best performance and specifications
Connector Type
• Individual performance certificate shipped
F F with every module
B BNC • Patented make-before-break attenuator pad
design for hitless signal balancing
*3 x 2:1 and 2 x 4:1 housed in a single module.
**Leave last two digits blank for plain modules. • Chassis supports both passive and active
The M0 option is used in systems where the attenuator pad values will range from 0 dB to 10 dB.
M6 – 6 dB loss on the splitter or combiner leg when attenuator pad is removed
The M6 option is typically used in systems where the attenuator pad values range from 10 dB to
25 dB. In this situation, the additional 6 dB of loss that is placed in line when the pad is removed
will help to limit overdriving active devices further downstream and will help limit transmitter laser
clipping, and overdriving of RF amplifiers in the distribution plant.
Ordering Information
Description Catalog Number
Plain Splitter/Combiner Modules
BNC connector 2:1 plain N-MPB12
4:1 plain N-MPB14
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Splitter/Combiner with Pad and Monitor Modules
F connector 0 dB default 2:1 combiner with monitor N-MCF12M0
2:1 splitter with monitor N-MSF12M0
Next Gen Network Solutions
Catalog Number
N - MD __ __ __ __ __
Ordering Information
Description Catalog Number
Directional Coupler Modules
BNC connector 9 dB Triple circuit N-MDB309R
12 dB Single circuit N-MDB112R
Inside Plant – Copper Solutions
Features
• Typically placed at the input to the forward
path optical transmitter, this module allows
for conditioning and grooming of the RF
signal gain and slope. It is designed as 1:1
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Conditioning and Monitor Modules; triple circuit, 20 dB, 0 dB default
BNC connector N-MMB320FM0
F connector N-MMF320FM0
ADC’s new L-Band series satellite splitter modules are engineered for the highest performance in
the 950 MHz to 2.15 GHz frequency range. These plain splitter/combiner modules feature dual port
power-passing capability for powering LNB’s. All L-Band modules are available with precision F
or BNC connectors, and are NEBS Level 3 compliant.
Next Gen Network Solutions
Catalog Number
N - ML __ __ __
Ordering Information
Description Catalog Number
Inside Plant – Copper Solutions
Amplifier
(front view)
Ordering Information
Description Catalog Number
Forward Path Amplifier Modules
BNC connector 20 dB N-MAB20FA
30 dB N-MAB30FA
F connector 20 dB N-MAF20FA
30 dB N-MAF30FA
Power Supply
(front view)
Ordering Information
Description Catalog Number
Power Supply Modules
AC to DC N-MVUVAC
•
DC to DC N-MV48DC
6/09
The ADC SignalOn® RF Switch Module (RFSM) is designed for use with the
SignalOn 8-position, or 20-position powered chassis. All RF connections to
the switch are made through standard 75 W BNC, or F connectors on the rear
of the module. All operating controls and indicators are located on the front
panel with configuration controls located on the rear of the module.
The primary function of the module is to monitor the RF signal gain of the
Next Gen Network Solutions
operating primary "A" input, and switch to the backup "B" input if the gain of
the primary path rises, or falls below the pre-set customer selected threshold.
Should the "A" input side go above, or fall below the threshold of the unit,
the RFSM will rapidly switch the input from the failed input to the secondary
input. This switch usually is less that 10 milliseconds. Switch status, failure LEDS,
and RF level bar graphs are mounted on the front panel of the switch module.
Switching threshold: +/- 3 dB or +/- 6 dB, and alarm contact closures are Dual RF Switch
located on the rear of module. Module
Features
• Continuous monitoring of primary and secondary • E asily configured for redundancy or A-B
• Detects both high and low power failures switch applications
• U
ser-selectable switching threshold: • F ront panel bar graph display provides indication
+/- 3 dB or +/- 6 dB of RF power and switching threshold
Inside Plant – Copper Solutions
• Fail-over switching time < 10 ms • I ndication of switch status provided by front panel
LED and rear terminal block contacts
• Automatic switchback after "A" path is restored
• E asily configured switching threshold levels via
• F ront-panel LED status and dual power rear DIP switch
level displays
• One-step calibration
• Alarm contact for remote failure monitoring
• Auto switch-back feature to primary input
• Available in BNC and F-connector configurations
• Built-in delay to prevent from false switching
• Single or dual modules
• Automatic or manual modes of operation
• NEBS Level 3 compliant
106612AE
Ordering Information
Description Catalog Number
Redundant RF Switch Modules
BNC connector Single circuit N-MRFSM1-B
Dual circuit N-MRFSM2-B
•
Features
• Fixed 22 dB
• Low distortion characteristics
• Low noise figure
• 5-200 MHz bandwidth
• Two 20 dB monitor ports (input and output)
• BNC or F connectors
• AC or DC powering
Ordering Information
Description Dimensions (H x W x D) Catalog Number
Reverse Path Amplifier Modules BNC connectors 57 mm x 31 mm x 203 mm RFX-AMP-22B
22 dB Fixed Gain F connectors (2.25" x 1.2" x 8.0")
RFX-AMP-22F
106612AE
•
6/09
Ordering Information
Description Catalog Number
Cable Management Kits; (includes rack mount cable management rings)
2 brackets, 2 – 2.5" x 5.5" cable rings N-ACMK-01P
4 brackets, 4 – 2.5" x 5.5" cable rings N-ACMK-04P
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Equalizer Pads
2 dB plug-in N-ACC-LE-02
3 dB plug-in N-ACC-LE-03
Next Gen Network Solutions
4 dB plug-in N-ACC-LE-04
5 dB plug-in N-ACC-LE-05
6 dB plug-in N-ACC-LE-06
7 dB plug-in N-ACC-LE-07
8 dB plug-in N-ACC-LE-08
9 dB plug-in N-ACC-LE-09
10 dB plug-in N-ACC-LE-10
11 dB plug-in N-ACC-LE-11
12 dB plug-in N-ACC-LE-12
13 dB plug-in N-ACC-LE-13
DC Power Upgrade Kits for;
2 RU chassis – used to power 8-position N-ACC-PWRKIT-08B
5 RU chassis – used to power 20-position N-ACC-PWRKIT-20B
ADC’s central office cables deliver the data bandwidth to eliminate throughput bottlenecks or downtime
and improve customer satisfaction. The increased throughput potential translates to increased customer
satisfaction. ADC combines innovative design and application engineering to deliver a cabling solution
that exceeds your network’s physical layer requirements.
• Exceptional 85- and 100-Ohm series cables for • Consistent product quality
both analog and digital services - No missing insulation, no excess adhesion
• Ideally suited for DS1, DS2, xDSL and all - Tangle-free, kink-free
broadband services
- Jacket and insulation concentricity
• Innovative and flexible designs and cable roundness
• Non-plenum or plenum-rated, low-heat release - Small outside diameter and cross-sectional area
cables in bundles and cable
• Shielded or unshielded - Streamlined engineering, production, and
• Meets or exceeds UL requirements quality processes
• Cables available that meet or exceed Telcordia® - In-process manufacturing quality inspections
requirements • Meets or exceeds industry requirements and
• S uperior-quality recognized through inclusion environmental regulations
on service provider and original equipment - Heavy-metal free
manufacturer approved vendor lists (AVLs) (i.e. cadmium, lead, mercury, etc)
Inside Plant – Copper Solutions
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• NEC 800 Type CMR
Compliances
Ordering Information
Outer Weight
Unit Diameter kg/km
Description Makeup mm (inches) (lbs/1000') Catalog Number*
26 AWG FTP riser cable 2 / 8 / 15 10.5 mm 156 kg (105 lbs) Dual Jaket B5ETRF-2526GYXX
Jacket color: gray (.41") Single Jaket B5ETRFS-2526GYXX
Packaging: reel
Number of Pairs:25
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• ICEA S-90-661
• Telcordia
®
Technical Audit Report DA-1385
Compliance Testing to GR-137-CORE; DS1
Waveform Compliance Testing at 550 feet
Ordering Information
Weight
Number Outer Diameter kg/km
Description of Pairs Unit Makeup mm (inches) (lbs/1000') Catalog Number*
106612AE
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• ICEA S-90-661
• T elcordia® GR-499 DSX-1 Pulse Wave Shape
Compliance at 550 feet
• T IA/EIA 464-B DSX-1 Pulse Wave Shape
Compliance at 550 feet
• T wo to four-pair, TIA/EIA-568-B.2
Inside Plant – Copper Solutions
Ordering Information
Weight
Number Outer Diameter kg/km
106612AE
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• ICEA S-90-661
• T wo to four-pair, TIA/EIA-568-B.2
Category 3 Horizontal Cable
• O
ver four-pair, TIA/EIA-568-B.2
Category 3 Backbone Cable
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• T elcordia® Technical Audit Report AU-833
Compliance Testing to GR-137-CORE
• T elcordia GR-499 DSX-1 Pulse Wave Shape
Compliance at 450 feet
Inside Plant – Copper Solutions
Ordering Information
Weight
Number Unit Outer Diameter kg/km
Description of Pairs Makeup mm (inches) (lbs/1000') Catalog Number*
26 AWG 4 None 7.6 mm (.30") 51 kg (34 lbs) DSR-04261DDGYXX
dual shield 6 None 7.9 mm (.31") 58 kg (39 lbs) DSR-06261DDGYXX
FTP riser cable
(1249C equiv.) 8 None 8.1 mm (.32") 67 kg (45 lbs) DSR-08261DDGYXX
Jacket color: gray 12 None 8.9 mm (.35") 79 kg (53 lbs) DSR-12261DDGYXX
Packaging: reel
106612AE
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• NEC 800 CMR
• T IA/EIA-568-B.2 Annex N
Category 5 Backbone Cable Requirements
Packaging: reel
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• NEC 800 Type CMR
Ordering Information
Weight
Number Outer Diameter kg/km
Inside Plant – Copper Solutions
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• NEC 800 CMR
• ICEA S-90-661
• T wo to four-pair, TIA/EIA-568-B.2
Category 3 Horizontal Cable
Ordering Information
Weight
Number Outer Diameter kg/km
Description of Pairs Unit Makeup mm (inches) (lbs/1000') Catalog Number*
Category 3 2 None 5.1 mm (.20") 18 kg (12 lbs) CH0224H0-GYXX
24 AWG
106612AE
Compliances
• UL Subject 444/CSA C22.2 No. 214
• (UL)-C(UL) Type CMR/CMG
• NEC 800 Type CMR
Ordering Information
Weight
Number Outer Diameter kg/km
Description of Pairs Unit Makeup mm (inches) (lbs/1000') Catalog Number*
Inside Plant – Copper Solutions
Category 6a Products...............................................................353
Category 6 Products.................................................................356
Category 5e Products...............................................................377
Fast Ethernet Patch Panels........................................................393
Ethernet Distribution Frames....................................................394
Vertical and Horizontal Cable Management.............................395
Workstation Faceplate and Surface Mount Boxes....................400
Modular Furniture Faceplates...................................................402
Surface Mount Boxes and Accessories.....................................403
106612AE
•
6/09
Features
• U
nique oblique elliptical offset filler
for improved alien crosstalk
• Features AirES® technology
• Manufactured with lead-free materials
Next Gen Network Solutions
• Common Applications
• 4/16Mbps Token Ring (IEEE 802.5)
• 10Base-T (IEEE 802.3)
• 100Mbps TP-PMD
• Broadband and baseband video
• 100Base-T (Fast Ethernet)
• 100Base-T4 (Fast Ethernet)
• 100Base-TX (Fast Ethernet)
• 100VG-Any LAN (IEEE 802.12)
• 52/155Mbps ATM (ATM Forum)
• 622Mbps ATM (ATM Forum)
• 1000Base-T (Gigabit Ethernet)
• 1 Gigabit Networking System (WGNA)
• 1.2Gbps ATM (ATM Forum)
• 77 Channel broadband video
• 10GBase-T Ethernet (802.3an)
Compliances
• UL Subject 444
• (UL)-C(UL) Type CMP
• ICEA S-90-661
Ordering Information
Features
• U
nique oblique elliptical offset filler
for improved alien crosstalk
• Manufactured with lead-free materials
• Common Applications
Next Gen Network Solutions
Compliances
• UL Subject 444
• (UL)-C(UL) Type CMR/CMG
• ICEA S-90-661
Data Connectivity Solutions
Ordering Information
•
Ordering Information
Description Catalog Number
Patch panel
24-port angled patch panel 1RU unloaded TPNP-24APC10-UN
24-port angled patch panel 1RU loaded with black CopperTen Jacks TPNP-24APC10-BK
Wire management bracket for cabinets in data center applications
CopperTen Cable Manager Bracket TPNP-NNC10-WM-BKT
Features
• Installed with CopperTen jacks, meets TIA/EIA
568-B.2-10 standards
• S taggered port design and isolation bar
provide improved alien crosstalk performance Loaded
Next Gen Network Solutions
• O
ne rack unit, 24-port design provides high
density and flexibility
• Rear wire manager included
• W
rite-on label area for quick, precise
port labeling
• Accepts a wide range of ADC connectors
• UL 1863 safety rating
Unloaded
• U
nique polymer design helps eliminate
alien crosstalk
Ordering Information
106612AE
•
6/09
Features
• M
eets or exceeds performance requirements
of TIA/EIA 568-B.2-10 standards
• 4
5-degree silver-plated IDCs provide secure,
reliable gas-tight connections
Next Gen Network Solutions
• A
ccepts KRONE® or 110 tool for wire
termination
• Universal A/B wiring label
• M
odular jacks fit port openings of
0.585" x 0.757" (14.86 mm x 19.23 mm)
with plate thickness from 0.048" to 0.060"
(1.23 mm x 1.52 mm)
Ordering Information
Description Catalog Number*
CopperTen RJ45 UTP modular 568A/B jack; Quantity: 1 6830 1 835-XX
*Replace XX with: 01 = White 06 = Blue
02 = Ivory 07 = Green
03 = Gray 08 = Yellow
04 = Black 09 = Purple
05 = Red 10 = Orange
22 = Electrical Ivory
Features
• M
eets or exceeds performance requirements
TIA/EIA 568-B.2-10 standards
• C
opper conductors in the cable pairs
are stranded for superior flexibility and
Next Gen Network Solutions
Ordering Information
106612AE
•
6/09
Specifications
CONSTRUCTION
Features AirES® technology
Conductors: 24 AWG solid bare copper
Insulation: 100% FEP
Pairing: Short, staggered pair lays
Filler: Fluoropolymer
•
Specifications
ELECTRICAL
Conductor DC resistance (maximum): 28.6Ω /1000 feet (9.38Ω/100 meters) @20°C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75°C
Next Gen Network Solutions
Fitted
Freq Impedance Insertion Loss Return Loss Pair-Pair Next PSNEXT
(MHz) (Ohms) (dB/100m) (dB/100m) (dB/100m) (dB/100m)
SPEC Max TIA Spec Min TIA Spec Min TIA Spec Min TIA Spec
1 100 ± 5 1.7 2.0 28.5 20.0 83.8 74.3 81.9 72.3
4 100 ± 3 3.4 3.8 32.1 22.9 74.9 65.3 74.3 63.3
8 100 ± 3 4.9 5.3 35.0 24.5 74.4 60.8 71.0 58.8
10 100 ± 3 5.5 6.0 34.6 25.0 70.3 59.3 68.0 57.3
16 100 ± 3 7.0 7.6 31.7 25.0 67.2 56.2 66.7 54.2
20 100 ± 3 7.9 8.5 32.1 25.0 66.8 54.8 64.7 52.8
25 100 ± 3 8.9 9.5 36.5 24.3 65.6 53.3 63.6 51.3
31.25 100 ± 3 9.9 10.7 36.7 23.6 61.8 51.9 60.9 49.9
62.5 100 ± 3 14.3 15.4 34.0 21.5 61.0 47.4 59.3 45.4
100 100 ± 3 18.4 19.8 30.8 20.1 60.2 44.3 57.4 42.3
155 100 ± 3 23.3 25.2 27.3 18.8 54.8 41.4 51.4 39.4
200 100 ± 3 26.8 29.0 31.0 18.0 54.9 39.8 52.4 37.8
250 100 ± 3 30.4 32.8 28.6 17.3 49.5 38.3 48.5 36.3
300 100 ± 3 33.7 27.2 49.0 48.2
350 100 ± 3 36.7 24.3 46.3 44.8
400 100 ± 3 39.6 25.0 47.5 45.2
450 100 ± 3 42.5 24.5 47.3 43.4
500 100 ± 3 45.3 24.2 43.8 43.0
550 100 ± 3 47.7 18.6 40.2 39.4
Freq Pair-Pair ACR PSACR Pair-Pair ELFEXT PSELFEXT LCL
Data Connectivity Solutions
Min TIA Spec Min TIA Spec Min TIA Spec Min TIA Spec Min
1 86.8 72.3 84.2 70.3 73.6 67.8 72.6 64.8 40.0
4 71.7 61.5 71.2 59.5 62.7 55.8 61.8 52.8 40.0
8 69.8 55.4 66.4 53.4 57.2 49.7 56.2 46.7 40.0
10 65.1 53.3 62.8 51.3 55.2 47.8 54.2 44.8 40.0
16 64.8 48.7 61.5 46.7 51.1 43.7 49.8 40.7 38.0
20 59.4 46.3 57.4 44.3 49.3 41.8 48.2 38.8 37.0
25 60.2 43.8 57.7 41.8 47.4 39.8 46.5 36.8 36.0
31.25 52.5 41.2 51.3 39.2 45.5 37.9 44.4 34.9 35.1
62.5 49.3 32.0 47.9 30.0 40.1 31.9 39.4 28.9 32.0
•
100 42.7 24.5 41.6 22.5 36.8 27.8 35.9 24.8 30.0
155 33.2 16.3 29.9 14.3 33.6 24.0 33.2 21.0 28.1
6/09
200 30.3 10.8 26.9 8.8 31.7 21.8 30.6 18.8 27.0
250 26.7 5.5 22.2 3.5 29.1 19.8 28.9 16.8 26.0
300 19.4 16.6 26.2 25.5
350 16.8 14.7 21.3 21.8
400 12.0 10.2 22.1 22.5
450 10.4 8.4 28.3 27.3
500 8.8 4.8 23.6 24.0
550 1.7 0.7 25.7 24.7
Note: The above listed discrete frequency electrical performance values are provided for engineering information
only. Actual compliance testing is based on swept frequency measurements. The spec values are based on
TIA/EIA 568-B.2-1 specifications.
Ordering Information
4-pair cable
Nominal OD: 0.208" (5.28mm)
Maximum OD: 0.212" (5.38mm)
Next Gen Network Solutions
Common Applications
• 4/16Mbps Token Ring (IEEE 802.5)
• 10Base-T (IEEE 802.3)
• 100Mbps TP-PMD
• Broadband and baseband video
Next Gen Network Solutions
Compliances
• UL Subject 444
• (UL)-C(UL) Type CMR/CMG
• (UL)-C(UL) Type CM/CMH
• ICEA S-90-661
• NEC 800 Type CMR or CM
• ISO/IEC 11801 Class E
• E TL Verified TIA/EIA-568-B.2-1 Category 6
horizontal cable requirements
Data Connectivity Solutions
Specifications
106612AE
CONSTRUCTION
Features AirES® technology
Conductors: 24 AWG solid bare copper
Insulation: 100% Polyolefin
Pairing: Short, staggered pair lays
Filler: Polyolefin
Color-coding: See Technical Reference Section, UTP color-code table
Jacket: Lead-free, flame retardant PVC
•
6/09
Specifications
ELECTRICAL
Conductor DC resistance (maximum): 28.6Ω /1000 feet (9.38Ω/100 meters) @20°C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75°C
Next Gen Network Solutions
Fitted
Freq Impedance Insertion Loss Return Loss Pair-Pair Next PSNEXT
(MHz) (Ohms) (dB/100m) (dB/100m) (dB/100m) (dB/100m)
SPEC Max TIA Spec Min TIA Spec Min TIA Spec Min TIA Spec
1 100 ± 5 1.8 2.0 27.2 20.0 83.4 74.3 81.0 72.3
4 100 ± 3 3.6 3.8 32.2 22.9 76.9 65.3 73.7 63.3
8 100 ± 3 5.1 5.3 34.2 24.5 65.6 60.8 64.0 58.8
10 100 ± 3 5.8 6.0 33.8 25.0 67.2 59.3 65.7 57.3
16 100 ± 3 7.4 7.6 33.9 25.0 65.9 56.2 63.8 54.2
20 100 ± 3 8.3 8.5 30.6 25.0 62.2 54.8 61.1 52.8
25 100 ± 3 9.3 9.5 33.1 24.3 60.1 53.3 59.9 51.3
31.25 100 ± 3 10.4 10.7 32.9 23.6 60.6 51.9 58.5 49.9
62.5 100 ± 3 14.9 15.4 33.5 21.5 54.0 47.4 53.1 45.4
100 100 ± 3 19.0 19.8 29.4 20.1 54.4 44.3 52.3 42.3
155 100 ± 3 24.0 25.2 23.5 18.8 52.2 41.4 50.5 39.4
200 100 ± 3 27.4 29.0 27.1 18.0 49.9 39.8 47.6 37.8
250 100 ± 3 30.8 32.8 27.9 17.3 50.1 38.3 47.7 36.3
300 100 ± 3 33.9 23.3 44.1 42.6
350 100 ± 3 36.6 21.5 45.9 45.2
400 100 ± 3 39.4 22.1 44.8 41.9
450 100 ± 3 42.3 20.4 45.8 42.5
500 100 ± 3 44.8 18.5 41.6 40.0
550 100 ± 3 47.1 18.3 41.1 38.8
Freq Pair-Pair ACR PSACR Pair-Pair ELFEXT PSELFEXT LCL
155 29.0 16.3 27.2 14.3 35.2 24.0 34.6 21.0 28.1
200 23.3 10.8 21.0 8.8 35.7 21.8 32.0 18.8 27.0
6/09
250 19.8 5.5 17.4 3.5 32.1 19.8 31.5 16.8 26.0
300 10.8 9.2 27.0 25.5
350 9.8 9.1 24.9 23.8
400 5.9 4.8 23.7 21.2
450 6.7 3.7 22.3 19.5
500 19.9 18.7
550 15.4 15.4
Note: The above listed discrete frequency electrical performance values are provided for engineering information
only. Actual compliance testing is based on swept frequency measurements. The spec values are based on TIA/EIA
568-B.2-1 specifications.
Ordering Information
106612AE
•
6/09
Features
• Individual 4-pair horizontal cables twisted and
bound together with Kevlar® cord
• P atented impedance matching for zero-bit
errors
Next Gen Network Solutions
Common Applications
• 4/16Mbps Token Ring (IEEE 802.5)
• 10Base-T (IEEE 802.3)
• 100Mbps TP-PMD
• Broadband and baseband video
• 100Base-T (Fast Ethernet)
• 100Base-T4 (Fast Ethernet)
• 100Base-TX (Fast Ethernet)
• 100VG-AnyLAN (IEEE 802.12)
• 52/155Mbps ATM (ATM Forum)
• 622Mbps ATM (ATM Forum)
• 1000Base-T (Gigabit Ethernet)
• 1Gbps Networking System (WGNA)
Compliances
• UL Subject 444
• (UL)-C(UL) Type CMP
• ICEA S-90-661
• NEC 800 Type CMP
Specifications
CONSTRUCTION
Features AirES® technology
Conductors: 24 AWG solid bare copper
•
Specifications
ELECTRICAL
Conductor DC resistance (maximum): 28.6Ω/1000 feet (9.38Ω/100 meters) @20°C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75°C
Next Gen Network Solutions
NEXT ELFEXT
Data Connectivity Solutions
Ordering Information
Features
• P atented AirES® conductor insulation
technology enables improved signal
strength and speed with superior
electrical performance
• Manufactured with lead-free materials
• Moisture barrier core wrap protects pairs
Common Applications
• 4/16 Mb/s Token Ring (IEEE 802.5)
• 10Base-T (IEEE 802.3)
• 100 Mb/s TP-PMD
• Broadband & Baseband Video
• 100Base-T (“Fast Ethernet”)
• 100Base-T4 (“Fast Ethernet”)
• 100Base-TX (“Fast Ethernet”)
• 100VG-Any LAN (IEEE 802.12)
• 52/155 Mb/s ATM (ATM Forum)
• 622 Mb/s ATM (ATM Forum)
• 1000Base-T (Gigabit Ethernet)
Data Connectivity Solutions
Compliances
• E TL Verified TIA/EIA-568-B.2-1 Category 6
Horizontal
• ISO/IEC 11801 Category 6 Horizontal Cable
Requirements
•
6/09
Specifications
Construction
Conductor: 23 AWG solid bare copper
Insulation: Polyolefin
Filler: Polyolefin Star
Core Tape: Moisture barrier core wrap
Next Gen Network Solutions
Jacket: Linear Low Density Polyethylene, Black 0.260" (6.6 mm) nominal O.D.
Thermal
Transport and Storage: -20° C to 75° C
Installation: 4° C to 50° C
Operation: -20° C to 75° C
Mechanical
Bend Radius
During Installation: 8 X O.D.
Installed: 4 X O.D.
Pull Tension: 25 lb/f (11ON)
Electrical
Conductor DC Resistance @ 20° C (Max): 28.6 Ω/1000 ft (9.38 Ω/100 m)
DC Resistance Unbalance (Max): 2%
Mutual Capacitance @ 20° C (Max): 17 pF/ft (5.6nF/100 m)
Operating Voltage (Max): 300 VDC
Worst Case Cable Skew: 45 ns/100 m
Nominal Velocity of Propagation: 66%
Ordering Information
Weight
Description LBS/KFT KG/KM Catalog Number
Reel – 10001 29 42.5 TN6TOSP-BK02
8 100 +/-3 4.8 5.3 34.5 24.5 74.0 60.8 72.3 58.8
10 100 +/-3 5.4 6.0 37.2 25.0 68.6 59.3 67.5 57.3
16 100 +/-3 6.8 7.6 33.5 25.0 71.0 56.2 68.8 54.2
20 100 +/-3 7.6 8.5 34.8 25.0 62.7 54.8 62.2 52.8
25 100 +/-3 8.6 9.5 36.1 24.3 59.1 53.3 58.6 51.3
31.25 100 +/-3 9.6 10.7 38.8 23.6 67.2 51.9 64.7 49.9
62.5 100 +/-3 13.6 15.4 35.2 21.5 56.8 47.4 54.1 45.4
100 100 +/-3 17.3 19.8 35.0 20.1 53.7 44.3 52.1 42.3
155 100 +/-3 21.7 25.2 32.8 18.8 53.6 41.4 51.9 39.4
200 100 +/-3 24.8 29.0 32.9 18.0 47.3 39.8 45.7 37.8
250 100 +/-3 27.8 32.8 31.3 17.3 49.1 38.3 47.2 36.3
300 100 +/-3 30.6 31.3 49.4 46.5
350 100 +/-3 33.1 30.0 49.1 46.7
400 100 +/-3 35.5 26.6 41.3 40.6
550 100 +/-3 42.1 22.3 42.1 40.4
PAIR-PAIR PSACR PAIR-PAIR PSELFEXT LCL
FREQ ACR dB/100m ELFEXT dB/100m dB/100m
MHZ dB/100m dB/100m
Min Spec Min Spec Min Spec Min Spec Min
1 82.3 72.3 79.2 70.3 79.4 67.8 75.1 64.8 40.0
4 76.6 61.5 73.1 59.5 67.7 55.8 63.3 52.8 40.0
Data Connectivity Solutions
155 32.1 16.3 30.4 14.3 37.6 24.0 34.7 21.0 28.1
200 23.0 10.8 21.0 8.8 35.1 21.8 33.3 18.8 27.0
6/09
250 21.9 5.5 20.0 3.5 27.5 19.8 26.8 16.8 26.0
300 19.8 - 16.8 - 25.3 - 23.9 -
350 16.3 - 14.0 - 27.3 - 25.0 -
400 6.2 - 5.5 - 29.4 - 27.6 -
550 1.0 - - - 23.9 - 23.7 -
Note: The above listed discrete frequency electrical performance values are provided for engineering information
only. Actual compliance testing is based on swept frequency measurements. The spec values are based on
TIA/EIA-568-B.2-1 specification.
Ordering Information
106612AE
•
6/09
Features
• Patented angle right/left eases stress on patch cords allowing for improved cable management
• Low profile dynamic angling allows for greater flexibility and use in cabinet environments
• UL 1863 certified and Category 6 performance verified
• Conductors can be terminated with either a KRONE® or 110 tool
• 45 degree silver-plated IDCs provide secure, reliable gas-tight connection
• Includes adhesive paper labels for station identification
• Universal wiring label for easy termination of either T568A/B
• Patch panels are designed to support Gigabit Ethernet transmission speeds
• P anels can be rack mounted in standard EIA 19-inch racks or wall mounted using optional 19-inch hinged
wall mount brackets
• Rear wire manager included
• TrueNet ID Tab Adapter Bezel included for use with TrueNet ID Tabs
Ordering Information
48-port angle right/left patch panel, T568A/B 3.5" x 19" x 1.5" PP48AC6T
compatible Quantity: 1 (88.9 mm x 482.6 mm x 38.1 mm)
•
6/09
Features
• T rueNet® impedance matched jacks
guarantee maximum throughput
• Meet TIA/EIA Category 6 requirements
• 4
5-degree silver-plated IDCs provide secure,
reliable gas-tight connections
• C
ompatible with any TrueNet modular
faceplate, modular furniture faceplate,
surface box and modular patch panel
• A
ccepts either a KRONE® or 110 tool for
wire termination for punchdown jack
• Universal A/B wiring label
Data Connectivity Solutions
106612AE
Ordering Information
Features
• UL certified and verified • Durable design to be in operation beyond 20-year
• Meets or exceeds TIA/EIA Category 6 component product warranty
specification • Impedance matched patch cord for maximum
• C
opper conductors in the cable pairs are stranded throughput
for superior flexibility and compacted to a near- • Flexible strain relief boot maintains proper bend
round shape to enhance impedance values radius to ensure peak performance
Ordering Information
White 6645-2-770-XX
Yellow 6645-2-773-XX
Blue 6645-2-791-XX
RJ45 plug to RJ45 plug, crossover wired, Quantity: 1
Green 6645-2-794-XX
RJ45 plug (T568B) RJ45 plug Gray 6645-2-797-XX
(T568A)
Red 6645-2-792-XX
White 6645-2-790-XX
Yellow 6645-2-793-XX
*Replace XX with:
•
04 = 4'
07 = 7'
6/09
10 = 10'
15 = 15'
25 = 25'
50 = 50'
Contact ADC for additional cable colors and lengths.
106612AE
Specifications
CONSTRUCTION
Features AirES® technology
Conductors: 24 AWG solid bare copper
Insulation: 100% FEP
Pairing: Short, staggered pair lays
Color-coding: See Technical Reference Section, UTP color-code table
Jacket: Lead-free, flame retardant PVC
•
6/09
Specifications
ELECTRICAL
Conductor DC resistance (maximum): 28.6Ω/1000 feet (9.38Ω/100 meters) @20°C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75°C
Next Gen Network Solutions
Fitted
Freq Impedance Insertion Loss Return Loss Pair-Pair Next PSNEXT
(MHz) (Ohms) (dB/100m) (dB/100m) (dB/100m) (dB/100m)
SPEC Max TIA Spec Min TIA Spec Min TIA Spec Min TIA Spec
1 100 ± 5 1.9 2.0 33.1 20.0 79.8 65.3 78.1 62.3
4 100 ± 3 3.7 4.1 30.1 23.0 72.4 56.3 67.9 53.3
8 100 ± 3 5.3 5.8 32.7 24.5 64.4 51.8 63.5 48.8
10 100 ± 3 6.0 6.5 31.4 25.0 63.7 50.3 62.4 47.3
16 100 ± 3 7.6 8.2 37.0 25.0 61.4 47.2 59.7 44.2
20 100 ± 3 8.6 9.3 37.5 25.0 59.7 45.8 58.0 42.8
25 100 ± 3 9.6 10.4 35.1 24.3 58.7 44.3 56.9 41.3
31.25 100 ± 3 10.8 11.7 34.4 23.6 58.7 42.9 54.9 39.9
62.5 100 ± 3 15.5 17.0 33.2 21.5 52.4 38.4 50.3 35.4
100 100 ± 3 19.8 22.0 29.8 20.1 49.3 35.3 47.2 32.3
155 100 ± 3 25.1 29.3 51.3 47.9
200 100 ± 3 28.9 22.9 47.5 45.5
250 100 ± 3 32.5 25.0 42.6 41.1
300 100 ± 3 35.9 22.5 43.6 41.1
350 100 ± 3 39.3 22.4 41.1 39.6
Freq Pair-Pair ACR PSACR Pair-Pair ELFEXT PSELFEXT
(MHz) (dB/100m) (dB/100m) (dB/100m) (dB/100m)
Min TIA Spec Min TIA Spec Min TIA Spec Min TIA Spec
1 78.0 63.3 76.3 60.3 70.2 63.8 70.0 60.8
Note: The above listed discrete frequency electrical performance values are provided for engineering
information only. Actual compliance testing is based on swept frequency measurements. The spec
values are also based on the TIA/EIA-568-B.2 specification.
Ordering Information
106612AE
•
6/09
Specifications
CONSTRUCTION
Features AirES® technology
Conductors: 24 AWG solid bare copper
Insulation: Polyolefin
Pairing: Short, staggered pair lays
•
Specifications
ELECTRICAL
Conductor DC resistance (maximum): 28.6Ω/1000 feet (9.38Ω/100 meters) @20°C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75°C
Next Gen Network Solutions
Fitted
Freq Impedance Insertion Loss Return Loss Pair-Pair Next PSNEXT
(MHz) (Ohms) (dB/100m) (dB/100m) (dB/100m) (dB/100m)
SPEC Max TIA Spec Min TIA Spec Min TIA Spec Min TIA Spec
1 100 ± 5 1.9 2.0 33.7 20.0 80.2 65.3 78.0 62.3
4 100 ± 3 3.8 4.1 38.9 23.0 68.7 56.3 66.6 53.3
8 100 ± 3 5.4 5.8 35.6 24.5 63.0 51.8 61.7 48.8
10 100 ± 3 6.1 6.5 36.4 25.0 61.8 50.3 59.2 47.3
16 100 ± 3 7.7 8.2 36.9 25.0 59.0 47.2 55.8 44.2
20 100 ± 3 8.7 9.3 35.1 25.0 60.0 45.8 58.3 42.8
25 100 ± 3 9.8 10.4 36.4 24.3 55.7 44.3 54.2 41.3
31.25 100 ± 3 10.9 11.7 33.3 23.6 53.7 42.9 52.3 39.9
62.5 100 ± 3 15.6 17.0 31.6 21.5 51.6 38.4 50.4 35.4
100 100 ± 3 20.0 22.0 32.8 20.1 46.4 35.3 44.1 32.3
155 100 ± 3 25.1 23.7 44.6 43.1
200 100 ± 3 28.8 24.8 46.6 43.3
250 100 ± 3 32.2 23.3 42.1 40.8
300 100 ± 3 35.5 21.9 42.0 39.1
350 100 ± 3 38.6 21.7 34.5 32.9
Note: The above listed discrete frequency electrical performance values are provided for engineering information
only. Actual compliance testing is based on swept frequency measurements. The spec values are based on TIA/EIA
568-B.2 specifications.
Ordering Information
Common Applications
• 4/16Mbps Token Ring (IEEE 802.5)
• 10Base-T (IEEE 802.3)
• 100Mbps TP-PMD
Next Gen Network Solutions
Compliances
• UL Subject 444
• (UL)-C(UL) Type CMR/CMG
• ICEA S-90-661
• NEC 800 Type CMR
• T IA/EIA-568-B.2 Category 5e horizontal,
individual cables
Specifications
Data Connectivity Solutions
CONSTRUCTION
Features AirES® technology
106612AE
Specifications
ELECTRICAL
Conductor DC resistance (maximum): 28.6Ω /1000 feet (9.38Ω/100 meters) @20°C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75°C
Next Gen Network Solutions
1 100 ± 10 100 ± 10 1.8 2.0 44.5 20.0 85.3 63.3 78.8 60.3
4 100 ± 8 100 ± 10 3.7 4.1 46.2 23.0 73.4 52.2 66.3 49.2
8 100 ± 6 100 ± 10 5.2 5.8 45.1 24.5 65.4 46.0 58.6 43.0
10 100 ± 6 100 ± 10 5.8 6.5 41.6 25.0 64.7 43.8 58.1 40.8
16 100 ± 5 100 ± 10 7.5 8.2 44.5 25.0 60.4 39.0 53.1 36.0
20 100 ± 5 100 ± 10 8.4 9.3 44.3 25.0 58.5 36.5 51.5 33.5
25 100 ± 4 100 ± 10 9.4 10.4 43.4 24.3 54.6 33.9 48.1 30.9
31.25 100 ± 4 100 ± 10 10.5 11.7 43.5 23.6 53.1 31.2 45.5 28.2
62.5 100 ± 3 100 ± 10 15.1 17.0 41.4 21.5 43.6 21.4 36.8 18.4
100 100 ± 3 100 ± 10 19.5 22.0 42.1 20.1 36.0 13.3 29.9 10.3
155 100 ± 3 100 ± 10 24.4 43.7 27.7 21.0
200 100 ± 3 100 ± 10 27.8 39.6 22.2 15.8
250 31.5 38.6 17.1 10.5
300 34.8 40.0 13.4 6.5
350 37.6 37.5 8.8 2.3
Note: The above listed discrete frequency electrical performance values are provided for engineering information
only. Actual compliance testing is based on swept frequency measurements. The spec values are based on TIA/EIA
568-B.2-1 specifications.
Ordering Information
106612AE
•
6/09
and moisture.
Specifications
CONSTRUCTION
Conductors: 24 AWG solid bare copper
Insulation: 100% Polyolefin
ELECTRICAL CHARACTERISTICS
Conductor DC resistance (maximum): 28.6Ω /1000 feet (9.38Ω/100 meters) @20° C
DC resistance unbalance (maximum): 2%
Mutual capacitance (maximum): 17 pF/foot (5.6nF/100 meters)
Operating temperature (maximum): 75° C
Operating voltage (maximum): 300VDC
•
8 100 ± 6 100 ± 10 5.2 5.8 45.1 24.5 65.4 46.0 58.6 43.0
10 100 ± 6 100 ± 10 5.8 6.5 41.6 25.0 64.7 43.8 58.1 40.8
16 100 ± 5 100 ± 10 7.5 8.2 44.5 25.0 60.4 39.0 53.1 36.0
20 100 ± 5 100 ± 10 8.4 9.3 44.3 25.0 58.5 36.5 51.5 33.5
25 100 ± 4 100 ± 10 9.4 10.4 43.4 24.3 54.6 33.9 48.1 30.9
31.25 100 ± 4 100 ± 10 10.5 11.7 43.5 23.6 53.1 31.2 45.5 28.2
62.5 100 ± 3 100 ± 10 15.1 17.0 41.4 21.5 43.6 21.4 36.8 18.4
100 100 ± 3 100 ± 10 19.5 22.0 42.1 20.1 36.0 13.3 29.9 10.3
155 100 ± 3 100 ± 10 24.4 43.7 27.7 21.0
200 100 ± 3 100 ± 10 27.8 39.6 22.2 15.8
250 31.5 38.6 17.1 10.5
300 34.8 40.0 13.4 6.5
350 37.6 37.5 8.8 2.3
Note: The above listed discrete frequency electrical performance values are provided for engineering information
only. Actual compliance testing is based on swept frequency measurements. The spec values are also based on the
TIA/EIA-568-B.2 specification.
Ordering Information
24-port enhanced patch panel A/B 24-port enhanced patch panel, paper labels, A/B
48-port enhanced patch panel A/B 48-port enhanced patch panel, paper labels, A/B
Features
• U
L 1863 certified and Category 5e • U
niversal wiring label for easy termination of
performance verified either T568A/B
• Include rear wire manager • P atch panels are designed to support Gigabit
• W
ire can be terminated with either a KRONE or Ethernet transmission speeds
110 tool • P anels can be rack mounted in standard
EIA 19-inch racks or wall mounted using
• 4
5 degree silver-plated IDCs provide secure, optional 19-inch hinged wall mount brackets
reliable gas-tight connection
• Include paper labels or silk-screened area for
station identification
Ordering Information
Data Connectivity Solutions
Features
• P atented angle right/left eases stress on patch • U
niversal wiring label for easy termination of
cords allowing for improved cable management either T568A/B
• L ow profile dynamic angling allows for greater • P atch panels are designed to support Gigabit
flexibility and use in cabinet environments Ethernet transmission speeds
• U
L 1863 certified and Category 5e • P anels can be rack mounted in standard EIA 19-
performance verified inch racks or wall mounted using optional 19-inch
• C
onductors can be terminated with either hinged wall mount brackets
a KRONE or 110 tool • Rear Wire Manager included
• 4
5 degree silver-plated IDCs provide secure, • TrueNet ID Tab adapter bezel included for use with
reliable gas-tight connection TrueNet ID Tabs
• Includes adhesive paper labels for
station identification
Ordering Information
Ordering Information
Features
• D
urable, quality construction for
maximum performance
• Saves time in moves, adds, and changes
• F eatures secure and convenient 25-pair
Next Gen Network Solutions
The first step to integrate Fast Ethernet traffic into a twisted pair network is to terminate both station
side and equipment side connections on high performance ADC patch panels.
For the Ethernet switching system, 5100 and 5800 patch panels provide convenient 25-pair (50-pin)
female RJ21x connections on the rear, with rugged 8-pin modular jacks on the front. Port identification
is accomplished with write-on port labels and optional icons.
Ordering Information
Description Pin-Out Port Count Rear Connector Rack Units Catalog Number
5100 patch panel 1, 2–3, 6 24 RJ21x 2 ADCPP245100TEL
5100 patch panel 1, 2–3, 6 48 RJ21x 2 ADCPP485100TEL
Data Connectivity Solutions
ADC’s Ethernet Distribution Frame (EDF) forms a central patching location between active Ethernet
network elements. By creating a centralized craft interface for adds, upgrades, and rearrangements on
Ethernet equipment, the EDF enables change without service disruptions. This central patching location
provides a logical and easy-to-manage infrastructure due to two design characteristics:
• All network elements have permanent equipment cable connections that are, once terminated,
never handled again.
Next Gen Network Solutions
• All changes, circuit rerouting, upgrades, maintenance and other activities are accomplished using
semi-permanent patch cords on the front of the EDF cross-connect bay.
Media Converter
1
Next Gen Network Solutions
Features
• Integrated front, rear, horizontal, and • O
ptional slack managers available for
vertical cable management 6-, 8-, 10-, and 12-inch widths
• P atented rib cage design eliminates horizontal • Fits standard EIA rack with three-inch channel
support trays and bars
• Used for single rack or as inter-rack unit
• Supports up to 912 ports on a single rack
• O
ptional crossover troughs and horizontal
• B
uilt-in bend radius protection ensures cable managers available
network integrity
• O
ptional EIA-standard horizontal support
Data Connectivity Solutions
• D
esigned for quick and easy moves, adds, bars available
and changes
106612AE
•
6/09
Ordering Information
Description Catalog Number
Glide cable manager, vertical mount;
Next Gen Network Solutions
Notes: Equips standard 7' cabinet with front or rear cable management.
Order two 4-packs to equip front and rear of cabinet.
ADCCMTG02
4RU, black, 23" rack ADCCMTG04-23
4RU, black ADCCMTG04
Horizontal cable managers
2RU ADCCMHIB-2U 4RU crossover trough
3RU ADCCMHIB-3U
4RU ADCCMHIB-4U
With slack managers, 3RU ADCCMHIBS-3U
With slack managers, 4RU ADCCMHIBS-4U
Rear cable management bar, 19" Horizontal cable manager
1" extension ADCCMRSB
Rear cable management bar, 19"
4" extension ADCCMRSB-4
Slack manager ADCCMVIBSP
Stabilizers
6.18" Stabilizer
ADCCMVESB06
8.38" ADCCMVESB08
10.18" ADCCMVESB10
12.18" ADCCMVESB12
Extender brackets, 19" to 23"
1RU EB-17B
2RU EB-35B
4RU EB-70B Slack manager
Note: Stabilizer used at end of lineup for each Vertical Integrator section.
Data Connectivity Solutions
Ordering Information
106612AE
Ordering Information
1.5"x 3" Front Manager, Pack Quantity: 1 1.75" x 19" x 3.5" 6652 2 153-00
(44.45 mm x 482.6 mm x 88.9 mm)
3"x 3" Front Manager, Pack Quantity: 1 3.5" x 19" x 3.5" 6652 2 330-00
(88.9 mm x 482.6 mm x 88.9 mm)
Ordering Information
1.5"x 3" Front Manager and 1.75" x 19" x 3.5" 6652 2 153-14
3"x 3" Front Manager and 3.5" x 19" x 3.5" 6652 2 330-24
2"x 4" Rear Manager, Pack Quantity: 1 (88.9 mm x 482.6 mm x 88.9 mm)
3"x 3" Front Manager and 3.5" x 19" x 4.5" 6652 2 330-34
3"x 4" Rear Manager, Pack Quantity: 1 (88.9 mm x 482.6 mm x 114.3 mm)
•
6/09
106612AE
Ordering Information
4"x 5" Front and 4"x 5" Rear Manager, 34.6" x 4" x 5" ADCCMVIBS06F-2
83" Tall, Pack Quantity: 1 (878.84 mm x 101.6 mm x 127.0 mm)
Applications
Features
Specifications
Operating Temperature Range: -10º TO 70 ºC (14º TO 158 ºF)
Material Construction: ABS PLASTIC
Flammability Rating: UL 94-V0
Safety Rating: UL 1863
Next Gen Network Solutions
Single-Gang Faceplates
All single-gang faceplates fit standard, single-gang box; include 2 blank paper labels, 2 clear plastic label
protectors, 1 logo insert, reversible-icon ID tabs numbered 1-6 (icon colors match faceplate), mounting
screws (#6-32x15/16")
Ordering Information
Description Dimensions Catalog Number*
2-port flush mount single-gang faceplate 4.5" x 2.75" x 0.25"
6644 1 152-XX
2 outlet labeling areas and 2 individual port ID areas (114.5 x 70.0 x 6.35 mm)
4-port flush mount single-gang faceplate 4.5" x 2.75" x 0.25"
6644 1 154-XX
2 outlet labeling areas and 4 individual port ID areas (114.5 x 70.0 x 6.35 mm)
6-port flush mount single-gang faceplate 4.5" x 2.75" x 0.25"
6644 1 156-XX
2 outlet labeling areas and 6 individual port ID areas (114.5 x 70.0 x 6.35 mm)
4-port angled single-gang faceplate 4.5" x 2.75" x 0.25"
6644 1 174-XX
2 outlet labeling areas and 4 individual port ID areas (114.5 x 70.0 x 6.35 mm)
*
eplace XX in catalog number to indicate color:
R
01 = White 02 = Ivory 03 = Gray 04 = Black 22 = Electrical Ivory
Dual-Gang Faceplates
Dual-gang faceplates require standard NEMA dual-gang opening of at least 3.563" x 2.75"; include
Data Connectivity Solutions
4 blank paper labels, 4 clear plastic label protectors, logo inserts, reversible-icon ID tabs numbered 1-6
(icon colors match faceplate), 4 mounting screws (#6-32x15/16")
106612AE
Ordering Information
Description Dimensions Catalog Number*
4-port flush mount dual-gang faceplate 4.5" x 4.94" x 0.25"
6644 1 164-XX
4 outlet labeling areas and 4 individual port ID areas (114.5 x 125.48 x 6.35 mm)
8-port flush mount dual-gang faceplate 4.5" x 4.94" x 0.25"
6644 1 168-XX
4 outlet labeling areas and 8 individual port ID areas (114.5 x 125.48 x 6.35 mm)
•
TrueNet modular furniture faceplates are compatible with leading office furniture and accept TrueNet
modular jacks and connectors. Contact ADC Technical Assistance Center for specific model compatibility.
Ordering Information
Modular Furniture
Next Gen Network Solutions
Herman Miller,
icon ID tabs numbered 1-6 (icon colors
Phoenix, Kimball
match faceplate)
4-Port Beltline Adapter for Herman Herman Miller -
2.45" x 4.20" x 0.36" 6644 3 299-XX
Miller Ethospace furniture Ethospace
*
eplace XX in catalog number to indicate color:
R
01 = White 02 = Ivory 03 = Gray 04 = Black
•
6/09
Ordering Information
Description Dimensions Catalog Number*
2-port surface mount box
Features 1 outlet labeling area and 2 individual port
ID areas. Includes 1 blank paper label, 1 clear plastic
1" x 2.25" x 2.31"
label protectors,1 logo insert, reversible-icon ID tabs 6644 1 222-XX
Next Gen Network Solutions
Accessories
Ordering Information
Data Connectivity Solutions
Catalog Number
Distribution Fiber FD3 - AC __ __ __ __ __ __ __ __ __
Panels Loaded
Next Gen Network Solutions
*See page 420 to order individual splitters lead configurations and have best
delivery dates.
•
6/09
Catalog Number
Distribution Fiber
FD3 - AE __ __ __ __ __ __ __ __ __
Panels Loaded
Next Gen Network Solutions
072 72 fibers
Feeder Cable Size
144 144 fibers
1 12 fiber
216 216 fibers
2 24 fiber
288 288 fibers
4 48 fiber
Outside Plant – Fiber and Copper Solutions
Adapters/Connector Type
Splitter Style
Singlemode
P Mini Plug-and-Play
N SC/UPC
J SC/APC Feeder/Distribution
Cable Stub Length
Number of Splitter Modules*
B 100 foot
0 No splitter modules
Distribution Cable Configuration
1 1 splitter module
2 2 splitter modules A All 72 fiber stubs
B All 144 fiber stubs
Splitter Type Loaded
C All 216 stubs
0 No splitters L Dual 1x8 D All 144 fiber stubs, except 1-72
A 1x32 M Dual 1x16 1-72 (72 fiber stubs)
73+ (144 fiber stubs)
C 1x16 N 1x4
G All 288 fiber stubs
S 1x64 P 2x16
G 2x32 U Dual 1x4 Feeder/Distribution Cable Type
J 1x8
G Single armor loose tube
*See page 420 to order individual splitters J Dielectric loose tube
106612AE
L Armored ribbon
T Dielectric ribbon
All shaded configuration options are
lead configurations and have best
delivery dates.
•
6/09
Catalog Number
FD3 - AJ __ __ __ __ __ __ __ __ __
Next Gen Network Solutions
Features
• Extremely Compact/High Capacity Design • Supports Diverse Splitter Module
Accommodates 12 feeder fibers, 96 distribution Configurations
fibers, and 3 splitter modules in a low profile 1x32, 2x32, 1x16, dual 1x16, 1x8, dual 1x8, dual
closure 1x4
• Rigorous Testing and Quality Standards • Craft Friendly Splitter Module Design
Meets Telcordia GR-771, GR-1209, GR-1221 and Easy to insert and remove without affecting
GR-326 requirements adjacent splitters
• Superior Performance • Diverse Cable Types
106612AE
Unsurpassed reliability makes it ideal for aerial, Accommodates loose tube, ribbon, dielectric and
buried and underground applications armored cable options
• Environmental Protection • Compatible Mounting Kits (sold separately)
Thermoplastic dome provides UV stabilization, Allow for easy strand, pole, pedestal and hand-hole
flame retardancy, and chemical and impact installations
resistance • Flexible Configuration Options
• Field Proven Hermetically Sealed Closure Allows for splicing interior to closure or stubbed
Provides air/water tight seal with OSP cable
• Re-Enterable/Reusable Shell • Product Dimensions
•
No re-entry kits or tools required Overall enclosure length - 28" (711 mm) x Dome
6/09
• “Mini Plug-and-Play” Splitter Module Length - 24" (609 mm) x Enclosure Diameter - 9"
Allows for true Plug-and-Play functionality (228 mm)
Ordering Information
Description Catalog Number
Pole/ Wall Mount Kit FD3S-ACC-P01
Strand Mount Kit FD3S-ACC-S01
Next Gen Network Solutions
Catalog Number
FD3S- __ __ 00 __ 0 __ __ __
Outside Plant – Fiber and Copper Solutions
Catalog Number
FPS-MPP 2 __ __ __
• Physical protection
6/09
• Intelligent design
Allows for standardized modules and
accessories across all cabinet sizes
• Unique “swing-out frame” design
Allows for easy maintenance and access
Outside Plant – Fiber and Copper Solutions
Catalog Number
F3X- __ __ __ __ __ __ __ __ __ __ __
Cable Length
B 100 foot
Cable 2 Type
E 300 foot
•
O No Cable
G 500 foot
6/09
A 72 Fiber Distribution
Cable 1 type
B 144 Fiber Distribution
A 72 Fiber Distribution D 216 Fiber Distribution
B 144 Fiber Distribution E 288 Fiber Distribution
D 216 Fiber Distribution
E 288 Fiber Distribution
wavelengths
• Rated from -55° C to 85° C
• Allows pass-through of up to 2 fibers per
splitter set
• Splitters are easy to insert and remove without
affecting adjacent splitters Feeder Pass-Thru Feature
• Reversible dust cap makes test and
turn-up easy
• Wide band pass 1260-1635 nm to ensure
optical performance for all applications
Catalog Number
Output Connector Style
FPS-MPP 1 __ __ __
Splitter Type N SC ultra polish
A 1x32 S Single 1x64 J SC angled polish
•
C 1x16 N 1x4
Input Connector Style
6/09
G 2x32 P 2x16
J 1x8 U Dual 1x4 N SC ultra polish
Features
• Integrated into traditional ADC fiber
management systems
• Qualified to GR-1209 and GR-1221
• Rugged package protects delicate splitters
from installer handling or in harsh
environments LGX® style
• Industry-leading low loss
• Terminated with GR-326 certified connectors
• Adapter port modules in a variety of package
styles allow adaptation to many applications
• Removable retainers allow access to rear ports
for cleaning
106612AE
Ordering Information
Description Dimensions (HxWxD) Catalog Number
VAMs unloaded chassis
7" vertical mount; accommodates 177.8 x 482.6/584.2 x 279.4 mm FVM-VLM19X700-W
up to 12 modules (7" x 19/23" x 11")
Next Gen Network Solutions
Catalog Number
Outside Plant – Fiber and Copper Solutions
Output (Common)
Connector Style Input 1 Connector Style
N SC/UPC N SC/UPC
J SC/APC J SC/APC
106612AE
•
6/09
Benefits:
• Robust environmental performance:
Withstands extremes in temperature and
conditions
• Technician-friendly features: Intuitive design
for ease of use
106612AE
Features:
• Available in 2, 4, 6, and 8 port configurations
• Flexible mounting options including pole,
pedestal, hand hole or strand to support both
aerial and below grade applications
Next Gen Network Solutions
Catalog Number
MST - __ __ M H 0 0 - __ __ __ __ __ U
06 6-Port
0500 500 Feet
08 8-Port
6/09
Catalog Number
MST - __ __ R H 0 0 - __ __ __ __ __ U
Features:
• Single bracket compatibility for all
mounting schemes
• Designed to save time and cost, reduce Hand Hole Mount Strand Mount
complexity and necessary logistics, and
streamline process of mounting MST
• Snap-in/snap-out installation easily engages/
disengages MST with an audible snap
engagement and single latch release
making MST readily available for drop cable
connections or re-connections
• Rigid plastic structure using same materials
as MST to withstand environmental
106612AE
Features Benefits
• Single-fiber, single-mode hardened connector • Provide the ultimate “Plug-and-Play” solution
SC APC drop cable assemblies for durable and reliable service connection in the
• Available with one or both ends connectorized outside plant/drop segment of the network
• Environmentally sealed connector • Cost effective solutions that provide for lower
overall installed costs throughout the FTTX network
• Easy connection to hardened adapters on
Outside Plant – Fiber and Copper Solutions
terminals or closures
• Arrow on hardened connector shell ensures
precise alignment of connector into optical port.
• Connector can be pulled through 1.25-inch
conduit
• Pulling eye on connector cap is designed for
100 lb. maximum pulling tension
• Drop cable fully tested to GR-20 and designed to
GR-3120
Connector 2 Length
106612AE
Hybrid Cables
As the leader in flexible, value added cable management solutions, ADC allows customers
to connect the Optical Network Terminal (ONT) to the drop point in multiple ways:
• OmniReach hardened connectors
• Spliced cables
Next Gen Network Solutions
• Standard SC adapters
Features
Features
• Durable, waterproof, and portable bag houses • Simplified turn-up and cleaning instructions
all testing and maintenance tools needed for a
• “One-stop” test resource for technicians
hardened connector architecture
supporting hardened connector architectures
•
• Cleaning kit for the hardened drop cable/adapter equipment (i.e. OTDRs, power meters) to support
includes a cleaning cassette and 50 hardened overall technician needs
adapter cleaning swabs
• Quick reference ordering guide is included to
replenish kit consumables
Benefits
• Intelligent Design—smart cable management
system maximizes performance, prevents
damage and allows for future growth.
• Practical—Matches optical node terminal
deployment to service request.
• Future-Proof—Supports efficient service
deployment, management and technology
upgrades.
• Flexible—provides for a wide number of
service applications
106612AE
•
6/09
Features
• Molded from polypropylene material which is • Uses standard 216B tools
lightweight and non-corrosive
• Removing the cover is quick and easy—a quarter
Next Gen Network Solutions
• The unique, unobtrusive design provides an turn with a can wrench releases the top for
attractive profile for residential deployments immediate access. The cover is self locking
• Includes a winter drop access door • Cover can be ordered with either bell jar or
• Provides intuitive, flexible fiber cable condensation venting options
management—meeting all bend radius • Meets GR-13 and NEMA 6 requirements
Ordering Information
Description Catalog Number
AT 300 – 8" Non-Metallic Pedestals
Pass-through spliced drop only FAT-YNB0012Y0-000G
2 – ADC hardened adapter drops wtih pigtails. HS fusion splice FAT-YNA1200Y0-H02G
4 – ADC hardened adapter drops with pigtails. HS fusion splice FAT-YNA1200Y0-H04G
6 – ADC hardened adapter drops with pigtails. HS fusion splice FAT-YNA1200Y0-H06G
AT 300 – 8" MST Mounting Pedestal
8" Pedestal with bell jar cover MST-ACC-Y10
8" Pedestal with bell jar cover with grounding MST-ACC-Y10G
Additional configurations available. May require minimum order quantity.
106612AE
•
6/09
Features
• Molded from polypropylene material which is
lightweight and non-corrosive
Next Gen Network Solutions
Ordering Information
106612AE
Features
• Industry standard BD4 8" metallic
pedestal provides access for splice
connectorized drops
Next Gen Network Solutions
8.62
8.53
Pedestal Cover
106612AE
28.0
Above Grade
Level
37.02
Security
•
Fastener
6/09
Base
9.0
Grade Level
Ordering Information
Description Catalog Number
AT 300 – BD4 Metallic Pedestal
Pass-through spliced drop only FAT-4NB0012Y0-000G
4 – ADC hardened adapter drops with pigtails. HS fusion splice FAT-4NA1200Y0-H04G
Next Gen Network Solutions
Accessories
Ordering Information
Description Catalog Number
Splice trays
12 fiber AT 300 splice tray FAT-FST-HS01
24 fiber AT 300 splice tray* FAT-FST-HS02
Sealing kits
8" pedestal sealing kit FAT-ACC-SLKT1
12" pedestal sealing kit FAT-ACC-SLKT2
Mounting stakes
ADC non-metallic 32" mounting stake MST-ACC-Y32S
ProForm/BD 42" mounting stake MST-ACC-J42S
ProForm/BD 32" mounting stake MST-ACC-J32S
Replacement Moisture Barrier Plate Kit**
8" ADC non-metallic FAT-MBP-Y
11" ADC non-metallic FAT-MBP-Z
8" ProForm FAT-MBP-R
106612AE
MT connectors
• All configurations can be either wall or rack
mounted with the hardware provided
• The MT connector configuration eliminates
the need for MDU Collector Enclosure
• Traditional swing-frame design allows superior
rear access
• Designed to meet NEMA-12 requirements
Catalog Number
FD3-M __ __ __ __ __ __ __ __ __ __ __
A 1x32 standard
Distribution Stub Length
C 1x16 standard
A 50' stub
G 2x32 standard-power
0 No stub
J 1x8 standard
L Dual 1x8 standard Distribution Cable Type
M Dual 1x16 standard R Riser ribbon stub
N 1x4 standard L Riser loose tube stub
•
Catalog Number
MCA-S __ __ __ 1 __ __ __
A 50'
B 100'
•
6/09
Catalog Number
RDT- __ __ ___ __ __ __ __ ____ __ __
0 No connectors
Enclosure Type
J 24 fiber Enclosure End Configuration
0 No connectors
12 12
24 24 Cable Length
100 100'
Connector Type
200 200'
J SC/APC
300 300'
Splice Trays 400 400'
0 No tray 500 500'
2 Heat shrink fusion
3 Mechanical/ribbon Cable Type
Features
• Integrated splice tray offers flexible splice • Identification and labeling assure product
management for individual or full splice capacity traceability and ease of identification
• Sealed cabinets protect fibers from dust, water • Designed to NEMA-12
spray, insects and other contaminants
106612AE
• Designed to GR-3123
• Accommodates high-density pre-terminated
• Complete fiber management allows for flexible
configurations, typically 72, 144, 288 or
re-arrangement
432 fibers
• Cable management and routing limits bend radius
• Accommodates high-density modular splitter
and adds strain relief
options; 1x16, 1x32, dual 1x8, dual 1x4
• 216-Tool (can wrench), key lock or padlock offers
• Utilizes “mini Plug-and-Play” splitter modules that
flexible security options
allows for true Plug-and-Play functionality; allows
for standardized splitter modules and accessories • Traditional swing frame design allows for superior
•
easy maintenance and access to back of modules • Bend insensitive fiber on splitter outputs
and cables
• True Plug-and-Play splitter technology
Catalog Number
FD3-M __ __ __ __ __ __ __ __ __ __ __ __ __
J 1x8 standard
L Dual 1x8 standard Distribution Cable Type
Catalog Number
FSB- __ __ __ __ __ __ __ __ __ __ __
1 2 3 4 5 6 7 8 9 10 11
Pigtails
7 Splitter Qty Installed
A Splice Ribbon Pigtail Assy
0 None
C Splice Pigtails (900 Micron)
1 One (1) Installed
Stubs
2 Two (2) Installed
S Ribbon OSP Cable
3 Three (3) Installed
R Ribbon IFC Cable
T Loose Tube OSP Cable
•
1.25” Liquid
Features and Benefits Tight Conduit
Catalog Number
FDT- __ __ __ __ __ __ __ __ __ __ __
Parking
Pigtails
P Parking
P Pigtails (2mm)
N No Parking
X No Pigtails
106612AE
•
6/09
Sizes
The oFDT-48 product accommodates up to
48 living units. Distribution cable fibers are
terminated on standard SC/APC adapters that
are easily accessible for service connection and
maintenance. Drop pigtails are initially terminated
Next Gen Network Solutions
Mounting Applications
All units are configurable for a variety of
mounting arrangements including wall, pole
and pedestal mounting. Each unit is provided
nominally with a wall mount bracket. Optional
pole-mount brackets and pedestals may be
ordered separately.
Special Features
These heavy gauge aluminum enclosures provide
the necessary protection against rain, wind, dust,
rodents and other environmental contaminants
while remaining lightweight for easy installation.
The aluminum construction with heavy powder
coat finish also provides for corrosion resistance.
security options
• Cable entrance ports seal cable at entry
• Cable management and routing limits radius
and adds strain relief
Catalog Number
FDT- __ __ __ __ __ __ __ __ __ __ __
Pigtails
Next Gen Network Solutions
Cable Type
Outside Plant – Fiber and Copper Solutions
Connector Type
Pigtails
J SC/APC
A Bare Ribbon Pigtail Assembly
C Pigtails (Colored)
Stubs
Splice Tray
S Ribbon OSP w/Conn
0 No Tray
R Ribbon IFC w/Conn
2 Heat Shrink Fusion
T Loose Tube OSP w/Conn
3 Mechanical/Ribbon
V Loose Tube IFC w/Conn
Fiber Count
24 24 Fibers
Stub Length
48 48 Fibers
000 0 Feet
025 25 Feet
Parking 100 100 Feet
P Parking 200 200 Feet
N No Parking 300 300 Feet
500 500 Feet
106612AE
•
6/09
Features
• Designed to splice and terminate 6-, 12-, 24-
and 48-fibers
• Integrated splice tray offers flexible splice
management for individual or mass splicing 24-Port
• Sealed enclosure protects fibers from dust,
water spray, insects and other contaminants
• Dual-hinged design ensures separation of
owner/client network segments
• NEMA-12 Rated
• Tested to GR-2898-CORE
• Front and rear layer maximizes wall space
utilization for both splicing and interconnect
• Robust steel construction protects fibers
against damage and ensures network
106612AE
reliability
• Slotted cable entrance ports allow for rapid 12-Port
cable installation and pass-through capability
• Cable management and routing limits bend
radius and adds strain relief
• 216-Tool (can wrench), key lock or padlock
offers flexible security options
•
6/09
48-Port
Catalog Number
FDT- __ __ __ __ __ __ __ __
Stub Length
Next Gen Network Solutions
P Parking
106612AE
N No Parking
•
6/09
Product Description
The ADC Indoor Fiber Distribution Terminal (iFDT)
series provides Customer Premises Equipment
applications with a compact and secure family
of enclosures for connecting fiber cables within
building entrance locations, communication
Next Gen Network Solutions
Sizes
The iFDT products are designed to splice and
terminate fibers in a range of sizes including 6,
12, 24, 48, 72, and 96 fibers.
Mounting Applications
The ADC iFDT Series cabinets are for indoor
wall mount applications and are designed to
NEMA-12 rating. The dual hinged design allows
106612AE
Fiber Management
The enclosures accommodate optical component
modules allowing the unit to house splitters,
WDMs, filters and other optical components.
For splicing applications, ADC’s splice trays can
be installed to support either individual fusion
Next Gen Network Solutions
Features
• 12-Packs provide for high-density
terminations and conserve wall space.
• Integrated splice tray offers flexible splice
management for individual or
mass splicing.
• Sealed enclosure protect fibers from dust,
water spray, insects and
other contaminants.
• Dual-hinged design ensures separation
of owner/client network segments.
• Designed to NEMA-12
• Designed to GR-2898-CORE
• Front and rear layer maximizes wall space
utilization for both splicing
and interconnect.
106612AE
Catalog Number
FDT- __ __ __ __ N X __ __
12 12 Fiber
24 24 Fiber
48 48 Fiber
72 72 Fiber
96 96 Fiber
106612AE
•
6/09
WSC-24 Features
Outside Plant – Fiber and Copper Solutions
WSC-48 Features
• Rated for indoor and outdoor use
• Accommodates up to (4) 12-fiber splice trays
• Built-in slack storage around splice trays
• Standard 216 tool access
• Padlock security
106612AE
Catalog Number
WSC-S __ 0 __ __ 1 __
Typical Applications:
• Garden or horizontal; indoor/outdoor cable
used to transition from an outdoor fiber
distribution terminal to each indoor living unit
• Mid or high-rise; all three cable types can
be used to transfer from an indoor fiber
distribution terminal to each individual living
unit within a building
•
• Indoor/Outdoor, Plenum and Riser cable or end without connector pulled first
options available • Ivory cable color helps distinguish cable
• Rugged 3 mm cable jacket construction in the field
Catalog Number
MDC- __ __ __ __ - __ __ __ __ __ __
Connector 1 Type
J APC SC Spool Option
N UPC SC 0 No Spool
Next Gen Network Solutions
J Standard Spool
Connector 2 Type F Spooled Connector First
J APC SC L Spooled Connector Last
N UPC SC
Outside Plant – Fiber and Copper Solutions
swellable yarns
• Hardened connector option fully compatible
6/09
Ordering Information
Catalog Number
FHD- __ __ 1K-0 __ M
Features
• Drop down panels offer easy access to OSP
cable stubs for splicing into DSLAMs and
network
• FDI (1:2) and patented Distribution Intercept
106612AE
Ordering Information
Description Catalog Number
NCX-1000 Cabinet FDI (1:2) Protected Configuration KCE-FJA600X1200-2
Equipped with 600 feeder pairs and 1200 distribution pairs with 864 DSLAM
ports in/out protected. Includes Insertion Tool and LSA-PLUS® Series 2 test cord.
Order ComProtect® protection modules separately.
Next Gen Network Solutions
Ordering Information
Description Catalog Number
Small Pole-or Pad-Mount Cabinet NCX-10487P00
Distribution intercept service delivery cabinet with 200 pair OSP with MS2
®
NCX-10487P00
connectors and 96 DSLAM ports in/out with 710 connectors. Includes Insertion Tool
Next Gen Network Solutions
connectors. Includes Insertion Tool and LSA-PLUS Series 2 green activation plugs.
Bracket supports first Adtran Total Access-1148 DSLAM and first 1100F 6652 2 175-00
aggregation unit
Bracket for second Adtran Total Access-1148 only 6652 2 175-01
Bracket for third Adtran Total Access-1148 and second 1100F aggregation 6652 2 175-03
Pole mount kit for NCX-144600 OSP-PMK-001
Pad mount frame for NCX-144600 ACE-152PMF
NCX-144600 split skirt riser 6" for pad mount frame ACE-ACCSPCR06S-152
Accessories
Insertion Tool 6417 2 055-01
Look-both-ways test cord for LSA-PLUS Series 2 blocks 6647 2 900-01
LSA-PLUS Series 2 green activation plugs used for xDSL activation 6089 3 055-02
Quantity: 1 (order in multiples of 100)
106612AE
•
6/09
Features
Ordering Information
Description Catalog Number
Distribution Intercept Cross Connect for Mounting in CoolPed Cabinet.
Includes mounting bracket, Insertion Tool and LSA-PLUS® Series 2 green activation plugs.
96 DSLAM ports in/out, 200 OSP intercept pairs NIB-096200N12S
Next Gen Network Solutions
Ordering Information
6/09
blocks required
• Up to 50% space savings over traditional
systems utilizing seperate cross-connect and
protection fields
• E asy to use and maintain — when inserted
into a Series 2 switching block, the field pair
can be isolated from the equipment side by
removing the protector and opening the circuit
Ordering Information
Description Catalog Number
ComProtect Protectors with Ground Bars
®
Features
• The original IDC termination block system
• Can be custom configured to meet specific
application requirements
• Available in 8- and 10-pair configurations
Next Gen Network Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
8-pair Series 2 block 0.88" x 4.88" x 1.63" 6036 1 005-00
Quantity: 1 (order in multiples of 10) (22.35mm x 123mm x 41.4mm)
Snaps into Type 85 rod mount bracket or standard
Type 85 back mount frame
10-pair Series 2 K110 disconnect block 0.88" x 4.88" x 1.63" 6468 5 102-00
Quantity per Pack: 10 (22.35mm x 123mm x 41.4mm)
Snaps into universal mounting system, Type 105 rod
mount bracket or standard Type 105 back mount
frame. Wires can be terminated with either KRONE®
insertion tool or industry-standard punchdown tool
equipped with 110-blade
10-pair Series 10 block 0.88" x 4.06" x 1.63" 6730 1 001-00
Quantity: 1 (order in multiples of 10) (22.35mm x 103.1mm x 41.4mm)
Snaps into Type 85 rod mount bracket
10-pair Series 10 block 0.88" x 4.06" x 1.63" 6730 1 001-01
Quantity: 1 (order in multiples of 10) (22.35mm x 103.1mm x 41.4mm)
106612AE
Features
• Upgrade from 66-type technology
• Unique center port allows monitoring
and “look-both-ways” testing without
disturbing IDC
Next Gen Network Solutions
Ordering Information
Description Dimensions (HxWxD) Catalog Number
25-pair disconnect block assembly 10" x 3.38" x 1.38" 6639 1 003-01
Quantity: 1 (254mm x 85.85mm x 35.05mm)
Field-terminated disconnect block; snaps into
106612AE
• 10-pair increment block is ideal for multi-pair for more pair terminations in standard relay rack
backbone cables. applications.
• HighBand 10 blocks are familiar to LSA-PLUS® • Field-terminated kits are a flexible solution for
Series 2 users and installers, eliminating the need custom applications.
for additional training.
Ordering Information
Dimensions
Description (H x W x D) Catalog Number
Preterminated Blocks
HighBand 10 100-pair block 245 mm x 124 mm x 94 mm 6637 1 150-60
(9.66" x 4.88" x 3.69")
HighBand 10 200-pair block 468 mm x 124 mm x 94 mm 6637 1 180-60
(18.44" x 4.88" x 3.69")
HighBand 10 300-pair preterminated block 689 mm x 124 mm x 94 mm 6637 1 210-60
(27.12" x 4.88" x 3.69")
Field-Terminated Kits
HighBand 10 200-pair field-terminated back 468 mm x 124 mm x 94 mm 6638 1 500-00
mount frame kit (18.44" x 4.88" x 3.69")
HighBand 10 300-pair field-terminated back 689 mm x 124 mm x 94 mm 6638 1 300-50
106612AE
One-pair Monitoring test cord with two banana plugs (1-foot cord) 6648 2 900-01
6/09
One-pair ”Look-both-ways“ test cord with four banana plugs (1-foot cord) 6648 2 901-01
Disconnection plugs, green - Quantity per pack: 20 6462 2 097-20
Features 50 pair
Outside Plant – Fiber and Copper Solutions
Applications Compliances
• Primary protection at commercial and MDU • UL® 497 listed
demarcation points
106612AE
Ordering Information
Description Catalog Number
25-pair Indoor/Outdoor
Enclosed building entrance terminal Quantity: 1
710 splice connector input 6649CP 2 720-00
Next Gen Network Solutions
MS 2®
splice connector input 6649CP 2 760-00
50-pair Indoor/Outdoor
Enclosed building entrance terminal Quantity: 1
710 splice connector input 6649CP 2 820-00
Features
• 5-pin protection devices safeguard valuable cable • 25-pair female Telco (RJ-21X) connectors available
plant and equipment from voltage surges and on indoor units
spikes
• Lightweight, compact and fully stackable
• Lockable metal enclosure with Telco override cover
• Instructions, template and mounting hardware
and a splicing chamber with the choice of either
included to mount the terminal directly to a wall
710 or MS2® splice connectors
• UL 497 listed
• 5-pin protectors are rated 300 volts
• 100% compliant with Telcordia TR-NWT-000937
• 10-pair Series 2 disconnect block output field
provided for cross-connection, “look-both-ways”
testing and monitoring without removing wires
or protectors
Ordering Information
Dimensions
Description (H x W x D) Catalog Number
25-pair indoor enclosed 5-pin building entrance terminal Quantity: 1
710 splice connector input and RJ-21X 7.5" x 15.5" x 5.4" 6649 1 430-09
Next Gen Network Solutions
Features
• High-density primary protection allows up to • Allow “look-both-ways” testing and monitoring
eighteen (double-sided) 100-pair units to be without removing wires or protection
mounted in a standard 7-foot, 19-inch rack
• Numerous labeling options allow comprehensive
• 26 AWG cable stub is provided for splicing to the marking
incoming 24 AWG cable
• Variety of mounting hardware options
• Building entrance terminals available with 5-pin
• UL 497 listed
protectors in 25-, 50- and 100-pair units
• 100% compliant with Telcordia® TR-NWT-000937
• 5-pin protectors are rated 300 volts
106612AE
Ordering Information
Dimensions
Description (H x W x D) Catalog Number
25-pair 5-pin protection building terminal, 8.75" x 6" x 4.88" 6649 1 110-01/XX
bottom entrance stub Quantity: 1 (222.3 mm x 152.4 mm x 123.9 mm)
50-pair 5-pin protection building entrance 14" x 6" x 4.88" 6649 1 210-01/XX
terminal, bottom entrance stub Quantity: 1 (355.6 mm x 152.4 mm x 123.9 mm
100-pair 5-pin protection building entrance 19.88" x 6.06" x 4.88" 6649 1 310-01/XX
terminal, bottom entrance stub Quantity: 1 (505 mm x 153.9 mm x 123.9 mm)
5-pin protectors included
5-pin protectors included; (4) 25-pin Telco 6649 1 313-01/XX
(RJ-21X) connectors mounted on back for fast
installation
106612AE
100-pair 5-pin protection building entrance 19.88" x 6.06" x 4.88" 6649 1 310-03/XX
terminal, top entrance stub Quantity: 1 (505 mm x 153.9 mm x 123.9 mm)
100-pair 5-pin protection building entrance 19.88" x 6.06" x 4.88" 6649 1 310-02/XX
terminal, bottom rear entrance stub (505 mm x 153.9 mm x 123.9 mm)
Quantity: 1; 5-pin protectors included
5-pin protectors included; (4) 25-pin Telco 6649 1 313-02/XX
(RJ-21X) connectors mounted on back for
fast installation
100-pair 5-pin protection building entrance 19.88" x 6.06" x 4.88" 6649 1 310-04/XX
•
terminal, top rear entrance stub Quantity: 1 (505 mm x 153.9 mm x 123.9 mm)
6/09
100-pair 5-pin protection building entrance 10.75" x 6.06" x 2.75" 6649 1 316-05/XX
terminal, protection only, bottom and top (2273.1 mm x 153.9 mm x 69.85 mm)
stubs Quantity: 1
*Replace XX with:
25 = 25'
50 = 50'
Contents
Next Generation
here............................................................................XX
SONET...........................................................481
OptEnet™ here............................................................................XX
Contents Optical Extension Platform.......................................485
Ethernet and
Contents E1 Data Access...................................................489
here............................................................................XX
T1 Servicehere............................................................................XX
Contents Delivery....................................................................492
T1 Indoor here............................................................................XX
Contents Remote Enclosures...................................................496
T1 Outdoor
Contents Doubler and Remote Enclosures...........................492
here............................................................................XX
Enterprisehere............................................................................XX
Contents LAN Extension..........................................................498
E1 and Fiber.............................................................................502
Contents here............................................................................XX
DAML/DLC...............................................................................503
FlexWave™ MMW 125 – Americas...........................................505
LoopStar® 800
The LoopStar® 800 is an advanced next-generation SONET
access system that allows service providers to cost-effectively
deploy and manage TDM and Ethernet services to end-user
customers from a single platform. Designed for both inside
plant and customer premises environments, the LoopStar 800
Next Gen Network Solutions
LoopStar® 1600
The LoopStar® 1600 is an advanced, next-generation
SONET multi-service transmission platform that allows
service providers to cost-effectively aggregate, deploy,
and manage TDM and Ethernet services. With its
compact design and ability to scale from an OC-3 to an
OC-192 network, the LoopStar 1600 provides a low-
cost, high-growth solution for adding services at the inside plant office or at the edge of the network.
When used with the LoopStar 800 product, the LoopStar 1600 provides a cost-effective aggregation
point for multiple subtending rings. The LoopStar 1600 also can function as multiple virtual Add-Drop
Multiplexers (ADMs) for hub node applications. In addition, with its versatile cross-connect architecture
and high port count, this platform is an efficient alternative to existing cross-connect systems that
require significantly more rack space at two to three times the cost.
Ordering Information
Description Catalog Number
LoopStar 800 Chassis Assembly LPS-FRM800-L2
Face Plate Rear LPS-PATEH
2 Port OC-3 Optical I/F Unit - VT Switching Hardened, Requires SFP Optics LPS-TO3DH
Next Gen Network Solutions
Transport Solutions
12 Port DS3 Remote Test/Protection Unit Hardened LPS-PQT3P01H
6 Port DS3 Transmux LPS-PDM3/H
6 Port DS3 Transmux Remote Test/Protection Unit LPS-PDM3P01
106612AE
*Contact customer service for correct part number used for a specific wavelength
Ordering Information
Description Catalog Number
OC-192 Optical Interface Unit (IR-2, LC) 40km LPS-OC19202
OC-192 Optical Interface Unit (LS-64.2, LC) 80km, without BA LPS-OC19203
OC-192 Optical Interface Unit (Le-64.2, LC) 60KM LS1600 Only without BPA LPS-OC19204
Next Gen Network Solutions
OC-192 Optical Interface Unit (LR-2b, LC) 80KM LS1600 Only with BPA, DCU LPS-OC19205
OC-192 Optical Interface Unit (40 wavelength, 100G, G.692) LPS-OC192W
OC-48 Configurable Optical Interface Unit (without Optical Module) LS1600 Only LPS-OC48A
OC-48 Optical Interface Unit LPS-OC480x
OC-48 Optical Interface Unit (SR-1, LC) LPS-OC4804
OC-48 Optical Interface Unit (IR-2, LC) LPS-OC4805
OC-48 Optical Interface Unit (100KM, LC) LPS-OC4806
OC-48 Optical Interface Unit (40 Wavelength, 100G, G.692, 170KM) LPS-OC48W01*
OC-48 Optical Interface Unit (40 Wavelength, 100G, G.692, 640KM) LPS-OC48W02*
4 Port OC-12 Optical Interface Unit Configurable Hardened LPS-OC12AH
2xOC-12 Optical Interface Unit LPS-PLT101
2 Port OC-12 Optical Interface Unit (LR-2) LPS-OC12D0x
8 Port OC-3 Optical Interface Unit, Requires SFP Optics LPS-OC30
6xDS-3 Mapper Board 1600 only LPS-PDT301/H
6 Port DS3 Transmux Hardened LPS-PDM301H
Faceplate Front LPS-FF
56xDS1 Electrical Interface Board LPS-PQI101
12xDS3 Electrical Interface Board LPS-PQI301
12xDS3 Electrical Interface Board (1:1 protection only) LPS-PQSI301
Transport Solutions
LoopStar 3600 chassis with 1*48 DS3(BNC) and 2*56 DS1 LPS-FRM3600-L7
6/09
*Contact customer service for correct part number used for a specific wavelength
Ordering Information
Description Catalog Number
Cross-connect and system control and timing board (35G STSI/5G VT1.5) LPS-GXCS01-L1
Cross-connect and system control and timing board (80G STSI/20G VT1.5) LPS-EXCS01-L1
LoopStar Metro 3600 system auxillary board LPS-AUX-L1
Next Gen Network Solutions
*Contact customer service for correct part numbers for SFP and specific wavelengths
Transport Solutions
106612AE
•
6/09
Features
• Modular design enables line card diversity within the same chassis
• Extend central office interconnect between network elements when distances are greater than 100 meters
• Ethernet delivery solution from central office to customer premises
• Reduce capital expenses associated with expensive optical line cards in network elements
• Auto-negotiation features eliminate the need for optical line card upgrade in network elements
• Redundant -48Vdc and +24Vdc power supplies
• Supports SNMP, TL1 and Telnet communication protocols
• Daisy-chain communication interfaces
• Supports 10Base-T, 100Base-TX and 1000Base-T UTP conversion to fiber
• Multimode fiber to singlemode fiber conversions
Transport Solutions
Features
Next Gen Network Solutions
OptEnet DC Power
Supply Module
Communications Modules
If remote monitoring is required, a central processor unit (CPU) can be deployed within the OptEnet™
Transport Solutions
platform. An alarm card is available if only local alarm indications are required. The CPU and alarm card
are optional. Only one of the two modules can be deployed in the chassis, so the network administrator
must determine which alarm notification method is preferable.
106612AE
The OptEnet 1000Mb/s media converter line card is designed to convert optical signals to electrical
signals. The card supports 1000BASE-T data rates over UTP and singlemode or multimode fiber.
6/09
Features
• Supports 10Base-T, and 100Base-TX
• Full and half duplex transmission (transmit and receive)
• Ethernet and fiber optic link indicators
• Auto negotiation over fiber and copper (ANSI/TIA 785)
• MDI-X – Auto-detects and corrects cross-over OptEnet 100Base-LX
Ethernet Line Card
Single-Mount Solution
The OptEnet Optical Extension platform
has expanded to include a single-mount
solution, which can be positioned on a
desktop or wall. The unit can be deployed
as the remote termination device linked
to the OptEnet modular platform or in a single-circuit, point-to-point configuration. The device converts
standards-based electrical Ethernet signals to fiber, enabling cost-effective, flexible Ethernet extensions
across a wide area or local area network (WAN or LAN).
Enabling network planners to bridge the gap between legacy copper infrastructure and new fiber plants,
the OptEnet platform maximizes the distance and quality benefits of fiber in a high quality, standards-
based solution. A variety of data interfaces are supported ranging from 10Mb/s Ethernet to OC-12 to
Gigabit Ethernet.
Transport Solutions
Features
• Extends Ethernet signal beyond the 100 meter limitation of Unshielded Twisted Pair (UTP)
106612AE
Ordering Information
Optical Conversion Single-Mount Units Power Catalog Number
Singlemode to multimode, 10-622Mb/s
Standard temperature AC power ADCST6000A-AC
DC power ADCST6000A-48
Next Gen Network Solutions
Transport Solutions
106612AE
•
6/09
Ordering Information
Description Catalog Number
Managed chassis
Transport Solutions
Ordering Information
Description Catalog Number
HDSL dual-pair line cards
LTU with Line Power, E1+Serial (G.703 & V.35, V.36, RS-530, X.21) LTU-804 L1C
Universal (LTU or NTU), E1+Serial (G.703 & V.35, V.36, RS-530, X.21) UTU-804 L1C
Doubler/Regenerator, span powered by LTU, double-wide 239 mechanics EDU-840 L3
G.SHDSL single/dual-pair STU-C/STU-R line cards with line powering
Ethernet+E1+Serial (10/100BASE-T, G.703/704, V.35, V.36, RS-530, and X.21) WD924GL-1B-01
E1+Serial (G.703/704, V.35, V.36,RS-530, and X.21) WD924GL-XX-01
E1 (G.703/704) WD921GL-XX-01
Ethernet (10/100BASE-T) WD920GL-1B-01
G.SHDSL single/dual-pair STU-C/STU-R line cards
Ethernet+E1+Serial (10/100BASE-T, G.703/704, V.35, V.36, RS-530, and X.21) WD924GN-1B-01
Transport Solutions
E1+Serial (G.703/704, V.35, V.36,RS-530, and X.21) WD924GN-XX-01
E1 (G.703/704) WD921GN-XX-01
106612AE
Ordering Information
Description Catalog Number
Enclosure
Single-slot, AC, DC, or line powered ERE-811 L5
Enclosure connector adapters
DB25M to M34F V.35 adapter ECA-800 L1
DB9M to RJ45F G.HDSL adapter ECA-802 L1
50 pin telco male to wire wrap adapter ECA-803 L1
DB9M to screw terminals xDSL adapter ECA-804 L1
DB15M to RJ45 120 Ω E1 adapter ECA-806 L1
Enclosure AC power cords
European standard power cord PC-EURO
United Kingdom standard power cord PC-UK
United States standard power cord PC-US
Transport Solutions
106612AE
•
6/09
HiGain® HMU-319
Ordering Information
Description Catalog Number
Wideband system – chassis and kits
Wideband chassis, split power HMS-358-L5
Transport Solutions
Wideband chassis, redundant power HMS-358-L6
Wideband single shelf kit with management card and fan WBS-3190 L9
Wideband management
106612AE
management unit slot and the line card slots. This HiGain® Managed Shelf
allows full local and remote management and
performance monitoring via serial, x.25 or Ethernet.
Ordering Information
Description Catalog Number
HiGain central office shelves
HiGain managed shelf, 23-inch CO shelf, 3192 mechanics, 28 slots HMS-317 L2
HiGain managed shelf, 19-inch CO shelf, 3192 mechanics, 22 slots HMS-318 L3
HiGain CO shelf, 23-inch, 220 mechanics, 14 slots HCS-417 L3
HiGain CO shelf, 19-inch, 220 mechanics , 12 slots HCS-418 L3
HiGain CO shelf, horizontal, 19/23-inch 3192 mechanics, 3 slots, HHS-319
separate GND and FGND
HiGain CO shelf, horizontal, 19/23-inch 200/400 mechanics, 3 slots HUS-340
HiGain test shelves and cards
HiGain CO test set, two slots, AC/DC, with AC power supply HCS-402 L3A
HiGain carrying case for HCS-402 test set HCC-462 L1
HiGain shelf adapter, 3190 to 220 (402) mechanics HSA-319 L1
HiGain shelf adapter, DDM+ (388) to 220 (402) mechanics HSA-388 L1
HiGain remote test set, two slot, 210 mini-bantam jacks HRT-442 L2
HiGain 400 mechanics power supply, 115 VAC to -48 VDC HPS-448 L1
Transport Solutions
HiGain management
HiGain management unit HMU-319-L81
HiGain retrofit management shelf, 19"/23" for unmanaged shelves HRM-238-L2
HiGain retrofit management bundle, HRM-238-L2 with 2-HMU-319 HRM-238-BNDL
•
6/09
All of ADC’s HiGain Central Office Line Units are remotely manageable
when used with a HiGain Management Unit (HMU) in a managed or retrofit managed shelf.
Ordering Information
Description Catalog Number
HiGain HDSLx central office line unit modules
HDSL, 3192 mechanics line unit, national HLU-319 L5
HDSL, 220 mechanics line unit, national HLU-231 L8
HDSL, DDM + mechanics line unit, national HLU-388 L5
HDSL, 200 mechanics line unit HLU-432-L1
HDSL, 200 mechanics line unit with DS1 and HDSL lines reversed HLU-432-L2
HDSL2, 3192 mechanics line unit LoopShield 2, national H2TU-C-319-L72
HDSL2, 220 mechanics line unit LoopShield 2, national H2TU-C-231-L72
HDSL2, DDM + mechanics line unit LoopShield 2, national H2TU-C-388-L72
HDSL2, 200 mechanics line unit H2TU-C-202-L7G
HDSL2, LiteSpan mechanics line unit, LoopShield H2TU-C-200-L71
HDSL4, 3192 mechanics line unit LoopShield, national H4TU-C-319-L51
HDSL4, 220 mechanics line unit LoopShield, national H4TU-C-231-L51
HDSL4, DDM + mechanics line unit LoopShield, national H4TU-C-388-L51
Transport Solutions
HDSL4, 3192 mechanics line unit, enhanced AC immunity (EACI) H4TU-C-319-L5AC
HDSL4, 220 mechanics line unit, enhanced AC immunity (EACI) H4TU-C-231-L5AC
HDSL4, DDM + mechanics line unit, enhanced AC immunity (EACI) H4TU-C-388-L5AC
106612AE
Ordering Information
Description Catalog Number
Fiber optic DS1 delivery solutions for Soneplex and 3192 chassis
Quad (DS1) Loop Extender 3192 Shelf Adaptor QLX-3192A
Quad (DS1) Loop Extender, Dual Fiber, SC Conn. CO/RT Unit QLX-SCA211
Quad (DS1) Loop Extender, Single Fiber, SC Conn. Central Office Line Card WQLXC-SCA100
Quad (DS1) Loop Extender, Single Fiber, SC Conn. Remote Line Unit WQLXR-SCA100
QLX Two-position Remote Chassis with RJ-45 connectors FRM-QLXRJ2C
QLX Two-position Remote Chassis with Wire-wrap connectors FRM-QLXWW2C
Shelf Controller Unit V4.2 – for Soneplex LEC/BB chassis SPX-SCU0A42
Transport Solutions
Ordering Information
Description Catalog Number
Indoor enclosures
Remote, Single Slot, 200/400 Mechanics, RJ48X, wall mount HRE-420 L2
Remote, Single Slot, 200/400 Mechanics, DB15/RJ48C, wall mount HRE-420 L4
Remote, Single Slot, 200/400 Mechanics, WW/RJ48C, wall mount HWM-T01
Remote, Dual Slot, 200/400 Mechanics, DB15/RJ48C, wall mount HRE-422 L4
Remote, Dual Slot, 200/400 Mechanics, WW/RJ48C, wall mount HWM-02B
Remote, Three Slot, 200/400 Mechanics, Wire Wrap, rack mount HUS-340
Remote, Four Slots, 200 Mechanics, DB15/RJ48C, wall/desk mount HRE-204 L3A
Remote, Four Slots, 200 Mechanics, RJ48X, wall/desk mount HRE-204 L3B
Remote, Six Slots, 200 Mechanics, RJ48C, PS wall/desk mount HRE-206 L1
Remote, Six Slots, 200 Mechanics, RJ48X, PS wall/desk mount HRE-206 L2
Remote, Twelve Slots, 200/400 Mechanics, WireWrap/50pin AMP, HRE-425
wall/desk/rack mount
Transport Solutions
Indoor enclosures accessories
Wallmount hinge for HRE-204 HRE-204-HMB
106612AE
HiGain 400 Mechanics Power Supply, 115 VAC to -48 VDC HPS-448 L1
HiGain Test Card, 200/400 Mechanics HTC-400 L1
Cable assembly for HRE-425, 12 port, RJ48C to 50pin Amp CHRE-425-RJ48C
Cable assembly for HRE-425, 12 port, RJ48X to 50pin Amp CHRE-425-RJ48X
•
6/09
Ordering Information
Description Catalog Number
Outdoor enclosures
Remote Enclosure, Single/Dual Slot, 239 mechanics, above ground, 30' Gel Stub** HRE-602 L1
HDSL4 Single-Shot Enclosure with integrated Repeater (H4D-409-L2)
™
SPX-HRXP0B7
Radiator II, 8 slot, 239 mechanics, below ground, 30' Air Core Stub* RAD-BA30-8
Radiator II, 8 slot, 239 mechanics, above ground, 30' Gel Core Stub* RAD-AG30-8T
Radiator II, 16 slot, 239 mechanics, below ground, 30' Air Core Stub* RAD-BA30-16
Radiator II, 16 slot, 239 mechanics, above ground, 30' Gel Core Stub* RAD-AG30-16T
Remotes/Doublers, 4 slot, 200/400 mechanics, 30' Gel Stub HRE-454-L1A
Remotes/Doublers, 4 slot, 200/400 mechanics, 30' Air Stub HRE-454-L2A
Remote/Doubler, One slot, 200/400 mechanics, Gel Stub HRE-450 L2B
Remote/Doubler, One slot, 200/400 mechanics, Air Stub HRE-450 L3B
Transport Solutions
**For HDSL, HDSL4 or G.SHDSL doubler use only, not for T1 repeater use
•
6/09
Ordering Information
Description Catalog Number
Desktop/remote site access devices
SDSL rate selectable (64kbps to 4.0 Mbps) Desktop Chassis, 110-240VAC power supply CARS-51-3
and US power cord
SDSL rate selectable (64kbps to 4.0 Mbps) Desktop Chassis, 110-240VAC power supply CARS-51-4
and European power cord
SDSL rate selectable (64kbps to 4.0 Mbps), internal 100-240VAC power supply and UK/ CARS-51-5
Ireland power cord
SDSL rate selectable (64kbps to 4.0 Mbps) Desktop Chassis internal CARS-52
-48V DC power supply
Four slot 19" Rack Mount Enclosure for Campus-RS - Standalone Units CACEN604
Star chassis/network management components
1 to 14 line unit cards, 1 to 14 network interface modules and 1 management card should be
Transport Solutions
ordered separately:
Campus Star-RS Chassis AC US. Includes one universal AC power supply, plus one US CACNS700-03-3
power cord. Second optional redundant/load sharing AC or DC power supply can be
106612AE
ordered separately.
Optional universal AC power supply plus one US power cord. CAPS-720-3
Campus Star-RS Chassis AC European. Includes one universal AC power supply, plus CACNS700-03-4
one European power cord. Second optional redundant/load sharing AC or DC power
supply can be ordered separately.
Optional universal AC power supply plus one European power cord. CAPS-720-4
Campus Star-RS Chassis AC UK. Includes one universal AC power supply, plus one CACNS700-03-5
UK Second optional redundant/load sharing AC or DC power supply can be ordered
•
separately.
Optional universal AC power supply plus one UK power cord. CAPS-720-5
6/09
Campus Star-RS Chassis DC. Includes one -48 VDC power supply. Second optional CACNS700-03-DC
redundant/load sharing AC or DC power supply can be ordered separately.
Optional -48 VDC power supply CAPS-730
Line units for Campus-RS Star Chassis, SDSL rate selectable (64kbps to 4.0 Mbps) CACLURS-02
Campus-Star Management Unit, including front panel controls/display, Telnet CACMU810-51
capabilities, and embedded SNMP agent
Blank Filler Panel Kit for Star Concentrator (Qty. 14 panels) CABP-014
Ordering Information
Description Catalog Number
Accessories
Spare US power cord PC-US
Spare European power cord PC-EURO
Next Gen Network Solutions
106612AE
•
6/09
Campus-RS
Rate-Selectable SDSL Systems
Ordering Information
Description Catalog Number
Network interface modules
DS1, with CSU/DSU CADS1
DSX-1, with CSU/DSU CADSX1
Flexible multiport fractional T1 delivery system. Provides three independant ports. CAFLEX
One DSX-1 port and two serial ports of v.35, RS530 or RS449 mapped to any
combination of 24 DS0s. Cables are not included. One or two cables should be
ordered. (See list of cables at bottom of page)
G.703/75 Ohm (E1 rate only) CAG703-75
G.703/120 Ohm (E1 rate only) CAG705-120
Ethernet (10/100Base-T) 2w/4w CAREX2
RS449 (n x 56/64kbps) CARS-449
RS530 (n x 56/64kbps) CARS-530
RS530A (n x 56/64kbps) CARS-530A
V.35 (n x 56/64kbps) CAV35
X.21/V.11 (n x 56/64kbps) CAX21
Transport Solutions
FLEX network interface module and cable bundle
CAFLEX card bundled with one RS449 cable. Second optional cable can be ordered CAFLEX-RS449
separately from the list below
106612AE
CAFLEX card bundled with one RS530 cable. Second optional cable can be ordered CAFLEX-RS530
separately from the list below
CAFLEX card bundled with one V.35 cable. Second optional cable can be ordered CAFLEX-V35
separately from the list below
FLEX card cables
Spare 12" High-density (HD) to V.35 female adapter cable for CAFLEX interface card* CACHD-35
Spare 12" High-density (HD) to RS-449 female adapter cable for CAFLEX interface card* CACHD-49
Spare 12" High-density (HD) to RS-530 female adapter cable for CAFLEX interface card* CACHD-53
•
6/09
106612AE
•
6/09
The EQLX is ideal for low density E1-based fiber applications, such as cellular and PCS transport and
tenant services within business parks or malls.
Transport Solutions
Ordering Information
106612AE
Ordering Information
Description Catalog Number
COT equipment
Common Equipment
19" COT shelf (amphenol, split power, heat deflector) FCS-718 L4B
23" COT shelf (amphenol, split power, heat deflector) FCS-719 L4B
PGTC interface unit (composite clock) FPI-829 L2
Line Units
24-channel COLU (POTS, LS/GS, ISDN, PGTC) FLL-812 L1A
Channel Units
8-channel LS/GS COCU (µ-Law, PGTC) FLC-703 L4B
RT equipment
Line Units
24-channel RTLU (POTS, LS/GS, ISDN, PGTC) FRL-842 L1C
Transport Solutions
Channel Units
8-channel LS/GS RTCU (µ-Law, PGTC) FRC-753 L4C
106612AE
•
6/09
Ordering Information
Description Catalog Number
Service COT Line Units Remote Line Units
4 POTS PLL-720 List 2 PRL-770 List 2B
6 POTS PLL-721 List 2 PRL-779 List 1B
COT Shelf PCS-719L1A
Management PMU-712L2
Transport Solutions
106612AE
•
6/09
Ordering Information
Description Catalog Number
MMW system consisting of two radios providing full rate Gigabit Ethernet
850nm MM optical interface for both radios MMW-125-MM-SYS
1310nm SM optical interface for both radios MMW-125-SM-SYS
Copper GBIC, RJ-45 connectors for both radios MMW-125-CU-SYS
Antennas
One 1 ft (0.3 m) parabolic antenna with pole mount kit MMW-ANT-1
One 2 ft (0.6 m) parabolic antenna with pole mount kit MMW-ANT-2
Transport Solutions
Note: A complete MMW link consists of one MMW system plus two antennas; MMW systems can be ordered with
different network interfaces and different antennas sizes. For example one could order a MMW system with
a single mode fiber interface and a 2 ft antenna on one end and a multimode interface and a 1 ft antenna
on the other end.
106612AE
•
6/09
Professional Services
•
6/09
0004LZHIOB050......................... 191
0004LZHIOC050......................... 191 6002LFPSKD50U29..................... 185 6048LFRCBCYYY........................ 179
0006LZHIOA050......................... 191 6002LFPSKD01029..................... 184 6048PTFCBCYYY........................ 177
0006LZHIOB050......................... 191 6002LFPSKD05029..................... 184 6072LFRCBCYYY........................ 179
0006LZHIOC050......................... 191 6002LFPSKD06229..................... 185 6072PTFCBCYYY........................ 177
7RFP-5NPW...................84, 227, 279 6002LFPZCH50E16..................... 184 6089 3 055-02............460, 462, 464
7RFP-10NPW............................... 279 6002LFPZCH50E20..................... 184 6096LFRCBCYYY........................ 179
7RFP-25NPW....................... 227, 279 6002LFPZCH50E29..................... 184 6096PTFCBCYYY........................ 177
9RFP-5NPW................................... 84 6002LFPZCH50U16.................... 185 6144LFRCBCYYY........................ 179
10G-A6TP-XX02......................... 353 6002LFPZCH50U20.................... 185 6417 2 055-01............460, 462, 464
10G-A6TR-XX02......................... 354 6002LFPZCH50U29.................... 185 6451 2 178-04............................ 471
0012LZHIOA050......................... 191 6002LFPZCH01016..................... 184 6451 5 035-00............................ 471
0012LZHIOB050......................... 191 6002LFPZCH01020..................... 184 6462 2 097-20............................ 471
0012LZHIOC050......................... 191 6002LFPZCH01029..................... 184 6462 2 101-01............................ 471
0024LZHIOA050......................... 191 6002LFPZCH05016..................... 184 6467 5 181-00............................ 390
0024LZHIOB050......................... 191 6002LFPZCH05020..................... 184 6467 5 181-10............................ 390
0024LZHIOC050......................... 191 6002LFPZCH05029..................... 184 6467 5 181-20............................ 390
115RFP-5NPW.............................. 84 6002LFPZCH06216..................... 185 6467 5 181-22............................ 390
659 1 105-10/06A...................... 465 6002LFPZCH06220..................... 185 6467 5 181-30............................ 390
3002LFRSKD50E29..................... 188 6002LFPZCH06229..................... 185 6467 5 181-40............................ 390
3002LFRSKD50U29.................... 189 6002LFRSKD50E29..................... 188 6467 5 181-50............................ 390
3002LFRSKD01029..................... 188 6002LFRSKD50U29.................... 189 6467 5 181-60............................ 390
3002LFRSKD05029..................... 188 6002LFRSKD01029..................... 188 6467 5 181-70............................ 390
3002LFRSKD06229..................... 189 6002LFRSKD05029..................... 188 6467 5 181-80............................ 390
3002LFRZCH50E16..................... 188 6002LFRSKD06229..................... 189 6467 5 181-90............................ 390
3002LFRZCH50U16.................... 189 6002LFRZCH50E16..................... 188 6467 5 195-00............................ 390
3002LFRZCH01016..................... 188 6002LFRZCH50E20..................... 188 6467 5 195-10............................ 390
3002LFRZCH05016..................... 188 6002LFRZCH50E29..................... 188 6467 5 195-20............................ 390
3002LFRZCH06216..................... 189 6002LFRZCH50U16.................... 189 6467 5 195-22............................ 390
5909 1 211-00............................ 467 6002LFRZCH50U20.................... 189 6467 5 195-30............................ 390
5909 1 212-00............................ 467 6002LFRZCH50U29.................... 189 6467 5 195-40............................ 390
6001LFPSFH50E16...................... 184 6002LFRZCH01016..................... 188 6467 5 195-50............................ 390
6002LFRZCH01020..................... 188 6467 5 195-60............................ 390
106612AE
6001LFPSFH50E20...................... 184
6001LFPSFH50E29...................... 184 6002LFRZCH01029..................... 188 6467 5 195-70............................ 390
6001LFPSFH50U16..................... 185 6002LFRZCH05016..................... 188 6467 5 195-80............................ 390
6001LFPSFH50U20..................... 185 6002LFRZCH05020..................... 188 6467 5 195-90............................ 390
6001LFPSFH50U29..................... 185 6002LFRZCH05029..................... 188 6467 5 198-00............................ 390
6001LFPSFH01016...................... 184 6002LFRZCH06216..................... 189 6467 5 198-10............................ 390
6001LFPSFH01020...................... 184 6002LFRZCH06220..................... 189 6467 5 198-20............................ 390
6001LFPSFH01029...................... 184 6002LFRZCH06229..................... 189 6467 5 198-22............................ 390
6001LFPSFH05016...................... 184 6004AIPCBCYYY........................ 177 6467 5 198-30............................ 390
6001LFPSFH05020...................... 184 6004AIRCBCYYY........................ 179 6467 5 198-40............................ 390
6001LFPSFH05029...................... 184 6004LFRBKOYYYZZSUB.............. 181 6467 5 198-50............................ 390
•
ACE-ACCSPCR06S-152.............. 462
6644 1 154-XX........................... 400 6649CP 2 820-00....................... 473 ACE-COM-L2.............................. 491
6644 1 156-XX........................... 400 6649CP 2 860-00....................... 473 ACE-FAN..................................... 491
6644 1 157-XX........................... 400 6649CP 2 920-00....................... 473 ACE-FIL....................................... 491
6644 1 164-XX........................... 400 6649CP 2 960-00....................... 473 ACK-1......................................... 243
6644 1 168-XX........................... 400 6652 1 880-10............................ 469 ACK-2......................................... 243
6644 1 174-XX........................... 400 6652 2 153-00............................ 397 ACK-3......................................... 243
6644 1 178-XX........................... 400 6652 2 153-14............................ 397 ACK-CEV-1................................. 244
6644 1 222-XX........................... 402 6652 2 175-00............................ 462 ACK-CEV-2................................. 244
6644 1 224-XX........................... 402 6652 2 175-01............................ 462 ACOK-2........................................ 71
6644 1 460-XX........................... 402 6652 2 175-03............................ 462 ACOK-PWNB.....84, 99, 222, 228, 230, 280
6644 2 201-XX........................... 402 6652 2 330-00............................ 397 AC-PWNB-RS2.5................... 222, 228, 280
6644 3 299-XX........................... 401 6652 2 330-24............................ 397 AC-PWNB-RS5.......... 84, 99, 222, 228, 280
6645-2-8X0-YY.......................... 358 6652 2 330-34............................ 397 AC-PWNB-RS10.......................... 222
6645-2-8X5-YY.......................... 358 6653 1 585-24............................ 388 ADCC06-2.................................. 395
6645-2-770-XX........................... 375 6653 1 585-48............................ 388 ADCCM-06................................. 395
6645-2-771-XX........................... 375 6653 1 587-24............................ 388 ADCCM-08................................. 395
6645-2-772-XX........................... 375 6653 1 587-48............................ 388 ADCCM-10................................. 395
6645-2-773-XX........................... 375 6653 1 677-24............................ 372 ADCCM-12................................. 395
6645-2-774-XX........................... 375 6653 1 677-48............................ 372 ADCCMHIB-2U........................... 396
6645-2-777-XX........................... 375 6653 1 679-24............................ 372 ADCCMHIB-3U........................... 396
6645-2-780-XX........................... 375 6653 1 679-48............................ 372 ADCCMHIB-4U........................... 396
6645-2-781-XX........................... 375 6653 2 000-01............................ 372 ADCCMHIBS-3U......................... 396
6645-2-782-XX........................... 375 6653 2 000-02............................ 372 ADCCMHIBS-4U......................... 396
6645-2-783-XX........................... 375 6659 1 005-10/06A.................... 465 ADCCMRSB................................ 396
6645-2-784-XX........................... 375 6659 1 008-30............................ 467 ADCCMRSB-4............................. 396
6645-2-787-XX........................... 375 6659 1 008-50............................ 467 ADCCMS-06............................... 395
6645-2-790-XX........................... 375 6659 1 008-90............................ 467 ADCCMS-08............................... 395
6645-2-791-XX........................... 375 6659 1 010-30.................... 460, 467 ADCCMS-10............................... 395
6645-2-792-XX........................... 375 6659 1 010-50............................ 467 ADCCMS-12............................... 395
6645-2-793-XX........................... 375 6659 1 010-90............................ 467 ADCCMTG02..................... 395, 396
6645-2-794-XX........................... 375 6659 1 105-00/06A.................... 465 ADCCMTG04..................... 395, 396
6645-2-797-XX........................... 375 6659 2 241-10............................ 467
106612AE
ADCCMTG04-23........................ 396
6647 2 900-01............460, 462, 464 6659 2 242-10............................ 467 ADCCMVESB06.......................... 396
6648 2 900-01............................ 471 6730 1 001-00............................ 468 ADCCMVESB08.......................... 396
6648 2 901-01............................ 471 6730 1 001-01............................ 468 ADCCMVESB10.......................... 396
6649 1 110-01/XX...................... 477 6830 1 830-XX........................... 374 ADCCMVESB12.......................... 396
6649 1 210-01/XX...................... 477 6830 1 835-XX........................... 357 ADCCMVIB-3CB20-4.................. 395
6649 1 310-01/XX...................... 477 7004LZHIOAYYY......................... 191 ADCCMVIB-6CB20-4.................. 395
6649 1 310-02/XX...................... 477 7004LZHIOBYYY......................... 191 ADCCMVIB06F-2................ 395, 398
6649 1 310-03/XX...................... 477 7004LZHIOCYYY........................ 191 ADCCMVIBC06B4...................... 395
6649 1 310-04/XX...................... 477 7006LZHIOAYYY......................... 191 ADCCMVIBC08B4...................... 395
6649 1 313-01/XX...................... 477 7006LZHIOBYYY......................... 191 ADCCMVIBC10B4...................... 395
•
FAT-MBP-Z................................... 428
DSX4R-36MB60-D36.................. 252 E-501-L409................................... 80
FAT-YNA1200Y0-H02G............... 425
DSX4R-C24................................. 253 E-501-L514................................... 83
FAT-YNA1200Y0-H04G............... 425
DSX4R-C32................................. 253 E-501-LGX.................................... 92
FAT-YNA1200Y0-H06G............... 425
DSX4R-C36................................. 253 E-501-LGX-HD........................ 89, 90
FAT-YNB0012Y0-000G................ 425
DSX4R-D24................................. 253 EB-17B................................ 338, 396
FAT-ZNA1200Y0-H04G............... 426
DSX4R-D32................................. 253 EB-35B................................ 338, 396
FAT-ZNA1200Y0-H06G............... 426
DSX4R-D36................................. 253 EB-70B........................................ 396
FAT-ZNA1200Y0-H08G............... 426
DSX4R-E08................................. 253 EB-87B........................................ 338
FAT-ZNB0012Y0-000G................ 426
DSX-4R-M30............................... 254 ECA-800 L1................................ 490
FBA-ALCZ.................................... 174
DSX-4R-M40............................... 254 ECA-802 L1................................ 490
FBA-ASCZ................................... 174
•
H4TU-C-388-L51........................ 493
FTL-7/7-D015M........................... 161 FTL-CCZ012M............................. 161
H4TU-R-319-L5A1...................... 493
FTL-7/7-D020M........................... 161 FTL-CCZ015M............................. 161
H4TU-R-402-L5S......................... 493
FTL-7/C-D001M.......................... 161 FTL-CCZ020M............................. 161
H4TU-R-402-L51......................... 493
FTL-7/C-D003M.......................... 161 FTL-E/E-D001M........................... 161
HCC-319 L2........................ 491, 492
FTL-7/C-D005M.......................... 161 FTL-E/E-D003M........................... 161
HCC-462 L1................................ 492
FTL-7/C-D006M.......................... 161 FTL-E/E-D005M........................... 161
HCS-402 L3A.............................. 492
FTL-7/C-D007M.......................... 161 FTL-E/E-D006M........................... 161
HCS-417 L3................................ 492
FTL-7/C-D010M.......................... 161 FTL-E/E-D007M........................... 161
HCS-418 L3................................ 492
FTL-7/C-D012M.......................... 161 FTL-E/E-D010M........................... 161
HDU-404-L2................................ 493
FTL-7/C-D015M.......................... 161 FTL-E/E-D012M........................... 161
•
HDU-409-L2A............................. 493
FTL-7/C-D020M.......................... 161 FTL-E/E-D015M........................... 161
HDW-100461............................. 284
FTL-7CZ001M............................. 161 FTL-E/E-D020M........................... 161
6/09
HFA357-FIL.................................. 491
FTL-7CZ003M............................. 161 FTL-EEZ001M.............................. 161
HFA-357 L1................................. 491
FTL-7CZ005M............................. 161 FTL-EEZ003M.............................. 161
HHS-319..................................... 492
FTL-7CZ006M............................. 161 FTL-EEZ005M.............................. 161
HLU-231 L8................................. 493
FTL-7CZ007M............................. 161 FTL-EEZ006M.............................. 161
HLU-319 L5................................. 493
FTL-7CZ010M............................. 161 FTL-EEZ007M.............................. 161
HLU-388 L5................................. 493
FTL-7CZ012M............................. 161 FTL-EEZ010M.............................. 161
HLU-432-L1................................ 493
FTL-7CZ015M............................. 161 FTL-EEZ012M.............................. 161
HLU-432-L2................................ 493
FTL-7CZ020M............................. 161 FTL-EEZ015M.............................. 161
HMS-317 L2................................ 492
FTL-9PE001M.............................. 162 FTL-EEZ020M.............................. 161
HMS-318 L3................................ 492
FTL-9PE003M.............................. 162 FTL-PPE001M.............................. 162
JC2/48M..................................... 317
HRE-206 L2................................. 495 JC4/24......................................... 317 LPS-OC12D0x/H.......................... 481
HRE-420 L2................................. 495 JC4/24M..................................... 317 LPS-OC30.................................... 482
HRE-420 L4................................. 495 JC6/12M..................................... 317 LPS-OC30x.................................. 481
HRE-422 L4................................. 495 JC6/48M..................................... 317 LPS-OC48A................................. 482
HRE-425...................................... 495 LPS-OC48W01............................ 482
HRE-450 L2B............................... 496 K LPS-OC48W02............................ 482
HRE-450 L3B............................... 496 KCE-DJA1600-1N....................... 460 LPS-OC120x................................ 481
HRE-450 L4B............................... 496 KCE-FJA600X1200-2.................. 460 LPS-OC192W.............................. 482
HRE-454-L1A.............................. 496 KCE-FJA900X1350-3N................ 460 LPS-OC480x................................ 482
HRE-454-L2A.............................. 496 KCE-FJA900X1800-2N................ 460 LPS-OC4804............................... 482
HRE-602 L1................................. 496 KLM-05....................................... 207 LPS-OC4805............................... 482
HRM-238-BNDL.......................... 492 KLM-10....................................... 207 LPS-OC4806............................... 482
HRM-238-L2............................... 492 KLM-15....................................... 207 LPS-OC19202............................. 482
HRT-442 L2................................. 492 KLM-20....................................... 207 LPS-OC19203............................. 482
HRU-402 L1................................ 493 KLM-25....................................... 207 LPS-OC19204............................. 482
HRU-488 L1................................ 493 KLM-30....................................... 207 LPS-OC19205............................. 482
HSA-319 L1................................ 492 KLM-CAP.................................... 207 LPS-P1PI13.................................. 481
HSA-388 L1................................ 492 KLM DUMMY............................. 207 LPS-PATEH................................... 481
HSE-100001................................ 241 LPS-PDI1301............................... 482
HTC-239-L1........................ 492, 496 L LPS-PDM3D2H............................ 483
HTC-319 L1................................ 491 LCA-210001............................... 290 LPS-PDM3/H................................ 481
HTC-400 L1........................ 492, 495 LCA-300001............................... 290 LPS-PDM3P01............................. 481
HUS-340............................. 492, 495 LCA-300002............................... 290 LPS-PDM3P01H........................... 481
HWM-02B................................... 495 LCA-300003............................... 290 LPS-PDM301H............................ 482
HWM-T01................................... 495 LCA-300004............................... 290 LPS-PDT1P02............................... 483
HXU-359-L2................................ 491 LCA-300005............................... 290 LPS-PDT101/H............................. 481
HXU-360-L2................................ 491 LCA-400004............................... 300 LPS-PDT102................................ 483
LCA-400005-12.......................... 300 LPS-PDT301/H............................. 482
I LCA-414001............................... 300 LPS-PHI3A................................... 483
ICM4L-01F.................................. 272 LCA-600001....................... 299, 300 LPS-PHI3B.................................... 483
ICM4L-01R.................................. 269 LCA-600001-BS.......................... 300 LPS-PHI13C................................. 483
ICM4L-02F.................................. 272 LCC-1.......................................... 300 LPS-PHI13D................................. 483
106612AE
P-3/8........................................... 206
NGF-ACCSHELF1-30..................... 70 N-MPB18.................................... 330
P-4.............................................. 206
NGF-F3ACCEGD007..................... 70 N-MPB24.................................... 330
6/09
P-5.............................................. 206
NGF-F3ACCFOTSB........................ 69 N-MPB32.................................... 330
P-7 1/2........................................ 206
NGF-F3ACCFOTSB-SL................... 69 N-MPF12..................................... 330
P-10............................................ 206
NGF-F3ACCFOTSB-SR................... 69 N-MPF14..................................... 330
P-12............................................ 206
NGF-F3MDF7A100-30.................. 58 N-MPF18..................................... 330
P-15............................................ 206
NGF-MDF7A100-30...................... 57 N-MPF24..................................... 330
PAT-005....................................... 246
NGF-SLM7A100............................ 59 N-MPF32..................................... 330
PAT-006....................................... 246
NGF-VSPM-7000L....................... 122 N-MRFSM1-B.............................. 336
PAT-007....................................... 246
NGF-VSPM-7000R...................... 122 N-MRFSM1-F............................... 336
PAT-100079................................. 246
NIB-096200N12S........................ 464 N-MRFSM2-B.............................. 336
PAT-100092................................. 246
NIB-144600N12S........................ 464 N-MRFSM2-F............................... 336
RAC-7C0199.............................. 279
PWX-1AFM2DA.......................... 203 RAC-7C0256.............................. 279 RP3-E10000................................ 287
PWX-1LFA2AA............................ 203 RAC-7C0274.............................. 279 RWS19........................................ 241
PWX-1LFA2DA............................ 203 RAC-7C0353...................... 227, 279 RWS23........................................ 241
PWX-1LFG1AA........................... 203 RAC-7C0370.............................. 279 RWS23-BLK................................. 241
PWX-1LFG2AA........................... 203 RAC-7C0381.............................. 279 RWS23-PUT................................ 241
PWX-1LFG2DA........................... 203 RAC-7C0382.............................. 279
PWX-1LFG4AA........................... 203 S
RAC-7C0496.............................. 279
PWX-1LFG4DA........................... 203 SC-FG.......................................... 338
RAC-7C0539.............................. 221
PWX-001RGCSD10PSDB............ 201 SGMEDIA8.4............................... 488
RAC-7C0545.............................. 221
PWX-001RGCSD10PSDP............ 201 SGUNLWDSL............................... 488
RAC-7C0551.............................. 221
PWX-001RGCSD10PWDB.......... 201 SHD-HR-44N............................... 230
RAC-7C0553.............................. 279
PWX-001RGCSD10PWDP........... 201 SHD-HR-85................................. 230
RAC-7C0554...................... 227, 279
PWX-001RGCSD20PWDP........... 201 SHD-HR-91................................. 230
RAC-7C0555.............................. 279
PWX-002FGCSD10PWDP........... 201 SLVG-1........................................ 314
RAC-7C0556.............................. 279
PWX-011RGCSD10PWDB.......... 201 SPX-APU0B1............................... 494
RAC-7C0563.............................. 279
PWX-011RGCSD10PWDP........... 201 SPX-HRXP0B7..................... 493, 496
RAC-7C0564.............................. 279
PWX-031FGCSD10PWDP........... 202 SPX-SCU0A42............................. 494
RAC-7C0565.............................. 279
PWX-031FGCSD20PWDP........... 202 SPX-SCU0A42Q.......................... 494
RAC-7C0566.............................. 279
PWX-031FXCSD10PWDP............ 202 STC-11B...................................... 299
RAC-7C0633.............................. 221
PWX-031RGCSD10PWDP........... 202 STC-12B.............................. 299, 300
RAC-7C0639.............................. 221
PWX-031RGCSD20PWDP........... 202 STC-13B.............................. 299, 300
RAC-7C0645.............................. 221
PWX-031RXCSD10PWDP........... 202 STD-10B...................................... 300
RAC-7C0810.............................. 221
PWX-041RCA4G1YSPWP........... 202 SVC-STG-WDSL.......................... 488
RAC-7C0811.............................. 221
PWX-041RCA4G4YSPWP........... 202 RAC-MX0615............................. 106 T
PWX-041RCA4XXYSPWP........... 202 RAC-MX0616............................. 106 T0024HA-GYXX.......................... 350
PWX-041RCK4G4YPWDP.......... 202 RAD-AG30-8T............................. 496 T0224HA-GYXX.......................... 350
PWX-041RCK4XXYSPWP........... 202 RAD-AG30-16T........................... 496 T0424HA-GYXX.......................... 350
PWX-061RD6NXXSP-C............... 205 RAD-BA30-8............................... 496 T0624HA-GYXX.......................... 350
PWX-061RD6YSTSP.................... 205 RAD-BA30-16............................. 496 T0824HA-GYXX.......................... 350
PWX-F41RBA2G5YSPHP............. 203 RFX-AMP-22B............................. 337 T1224HA-GYXX.......................... 350
PWX-F41RBA4XXYSPHP............. 203 RFX-AMP-22F.............................. 337 T1624HA-GYXX.......................... 350
PWX-F41RBG10YSPHP............... 203
106612AE
TNSR-3EXX02............................. 384 U
TNSR-4EXX02............................. 384 UEGP-7PW........40, 81, 92, 227, 279
TNSR-6EXX02............................. 384 UEGP-9PW.................................... 81
TP5ETA0BLXX............................. 391 UEGP-115PW................................ 81
TP5ETA0GNXX............................ 391 UTU-804 L1C.............................. 489
TP5ETA0GYXX............................ 391
TP5ETA0RDXX............................ 391 V
TP5ETA0WTXX............................ 391 VCG-25....................................... 118
Next Gen Network Solutions
Reference Guide
Next Gen Networks Reference Guide
1st Edition
Reference Guide
1st Edition
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
www.adc.com
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106612AE 6/09 Revision © 2009 ADC Telecommunications, Inc. All Rights Reserved