This penetrant test report summarizes the inspection of mild steel that underwent gas metal arc welding in the 3F position. The test used a visible and fluorescent penetrant method with solvent removable and water washable penetrants. An underfill defect greater than 4.8mm was found and rejected on Indication 1 during the 7 minute penetration and 5 minute development stages under 2000 Lx LED lighting. The report documents the date, materials, welding process, standards, test methods, surface conditions, defects found, and reviewer signatures.
This penetrant test report summarizes the inspection of mild steel that underwent gas metal arc welding in the 3F position. The test used a visible and fluorescent penetrant method with solvent removable and water washable penetrants. An underfill defect greater than 4.8mm was found and rejected on Indication 1 during the 7 minute penetration and 5 minute development stages under 2000 Lx LED lighting. The report documents the date, materials, welding process, standards, test methods, surface conditions, defects found, and reviewer signatures.
This penetrant test report summarizes the inspection of mild steel that underwent gas metal arc welding in the 3F position. The test used a visible and fluorescent penetrant method with solvent removable and water washable penetrants. An underfill defect greater than 4.8mm was found and rejected on Indication 1 during the 7 minute penetration and 5 minute development stages under 2000 Lx LED lighting. The report documents the date, materials, welding process, standards, test methods, surface conditions, defects found, and reviewer signatures.
Material : Mild Steel Welding process/position : GMAW / 3F Reference : ASME VIII Type of Penetrant Visible Fluorescent Methode Solvent Removable Water-Washable Post Emulsifier Time precleaning.......10.................min emulsifying ........................min penetration .......7................. min developing ...........5............min Surface condition weld machine process grind ..................... base metal weld part Range edge preparation repair weld back chipping ..................... No. Part/Item Size (mm) Type of Result Remark defect Accepted Reject 1 Indication 1 6x4 Underfill V Round Indication, Size > 4,8mm Lighting equipment : .......LED...................... Light intensity : .............2000 Lx................
Reviewed by Examined by,
Name NRP Signature 1. Arman. S 2. (_Dadang Agus T_) 3. NIP.