Professional Documents
Culture Documents
Pioneer Tanks Comparison With Concrete Fibregalss and Welded Tanks
Pioneer Tanks Comparison With Concrete Fibregalss and Welded Tanks
Installation
Poor Poor Poor Excellent
Remote Areas
Installation Rough
Poor Poor Poor Excellent
Terrain
On-Site
Preparation:
● The walls of a Pioneer Water Tank, being profiled, absorb any earth movement and will not distort under load, as a flat wall
tank will. This insures that the panels of a Pioneer Water Tank will not stress, buckle or tear.
● Pioneer Water Tanks have a flexible reinforced Polyethylene liner bottoms that are not ridged, so stored water can follow
the contour of the ground. Therefore no movement or stress is transferred to the main tank structure.
● Pioneer Water Tanks require no special site works or expensive foundations. All you need is a 150mm layer of clean sand.
Earth Movement:
● The unique design and quality assurance engineering to Australian Standards #3902 ensure that the Pioneer Water Tank
is extremely stable. Pioneer Water Tanks are designed to AS1170.4 -2007 Earthquake loads.
Assembly Time:
● An average Pioneer Water Tank of 96kl.(20,000 gallons Imp) and roof can be assembled by two people in around eight hours.
Dismantling can take around three hours.
●The demountable features of Pioneer Water Tanks make them ideal for temporary installations.
Pioneer Water Tanks have great flexibility of design. Any diameter inlet and outlet flanges can be fitted, and all accessories,
such as pumps, valves, ladders and catchment filters can be supplied.
THE BENEFITS OF THE PIONEER WATER TANK CAN BE SUMMED UP VERY SIMPLY:
● Cost effectiveness
● Speed of delivery and installation
● Flexibility of design.
● Custom designed to any diameter of tank height.
● Approved to Australian Standard AS4020 and USA standard NSF61 for potable water intended
for human consumption.