Professional Documents
Culture Documents
Bondcoat-Lws: Products Details
Bondcoat-Lws: Products Details
Bondcoat-Lws: Products Details
PRODUCTS DETAILS
BondCoat LWS is a formulated bonding coat developed for use in civil industry for application in bonding of old to
new concrete surfaces
USAGE
Bondcoat LWS is to be mixed in a ratio of 1:1 with cement to obtain a slurry.& then that slurry is to applied to the old
concrete. ideally within 30 minutes of application of the slurry, the next pour of concrete should be done.
Application Guidelines:
• Clean the surface to be applied with clean potable tap water, & allow for abot 5 to 10% of retained moisture
before application of the slurry
• Mix the Bondcoat LWS in the ratio of 1:1 by weight ( Polymer : Cement) in a bucket or pan & mix slowly till
it forms a slurry.
• The surface has to be free from any Dust, Dirt, Grease, oil, etc.
• Take the material in a Bucket or in a Paint pan depending upon the method of application.
• Apply by brush the ready mix material with even strokes taking enough material so that the applied film is a
bit more thick than the conventional paint film
• When applying the coating in outdoors, do not apply if rain, fog, or extremely High humidity is expected
• Post application of the coating,the subsequent Cementetious material can be applied within 30 minutes
Advantages:
• Easy to apply either by brush or Roller
• Longer open time as against any other conventional bonding coats
• Good bonding capacity with Cementetious material
Coverage:
Approximately 50 to 80 sft/kg/coat **(Mixed material)
**(depending upon the surface texture & porosity of the substrate)
Storage:
Store in a cool & dry place away from Direct sunlight with proper sealed container Take necessary precaution as the
Material is Flammable in nature
Shelf Life:
Minimum 1 year if stored in a cool & dry place with the lid properly closed
Packing :
35 Kg, 220 Kg barrel pack
The information contained herein is believed to be accurate and is offered in good faith for the guidance of the consumer. We cannot accept any
responsibility for errors in, or misinterpretation of the information contained in this brochure. In view of our constant
endeavor to improve the quality of our products, we reserve the right to alter or change the specifications without prior notice