This document is a project report from the finite element software PLAXIS. It summarizes the results of an analysis of a pumping station, including the node-to-node forces in an anchor between two nodes, the maximum compressive and tensile forces, the axial stiffness of the anchor, and its length. The project was completed by Koxhiyoki Kabuto of Japan for a master's thesis on May 14, 2021.
This document is a project report from the finite element software PLAXIS. It summarizes the results of an analysis of a pumping station, including the node-to-node forces in an anchor between two nodes, the maximum compressive and tensile forces, the axial stiffness of the anchor, and its length. The project was completed by Koxhiyoki Kabuto of Japan for a master's thesis on May 14, 2021.
This document is a project report from the finite element software PLAXIS. It summarizes the results of an analysis of a pumping station, including the node-to-node forces in an anchor between two nodes, the maximum compressive and tensile forces, the axial stiffness of the anchor, and its length. The project was completed by Koxhiyoki Kabuto of Japan for a master's thesis on May 14, 2021.