This document is an assignment submission for a course on Advanced Mechanics. It contains the results of analyzing strains and displacements problems using Mohr's circle. The results are presented in two tables, with the first table containing strain components (εx, εy, γxy) for each problem and the second table containing the principal strains (ε1, ε2) and angle of principal planes (θp) for each problem. The assignment was submitted by Engr. Syeda Zunaira Ali to Engr. Iftikhar Ahmed of the Department of Civil Engineering at the University of Engineering and Technology Peshawar.
This document is an assignment submission for a course on Advanced Mechanics. It contains the results of analyzing strains and displacements problems using Mohr's circle. The results are presented in two tables, with the first table containing strain components (εx, εy, γxy) for each problem and the second table containing the principal strains (ε1, ε2) and angle of principal planes (θp) for each problem. The assignment was submitted by Engr. Syeda Zunaira Ali to Engr. Iftikhar Ahmed of the Department of Civil Engineering at the University of Engineering and Technology Peshawar.
This document is an assignment submission for a course on Advanced Mechanics. It contains the results of analyzing strains and displacements problems using Mohr's circle. The results are presented in two tables, with the first table containing strain components (εx, εy, γxy) for each problem and the second table containing the principal strains (ε1, ε2) and angle of principal planes (θp) for each problem. The assignment was submitted by Engr. Syeda Zunaira Ali to Engr. Iftikhar Ahmed of the Department of Civil Engineering at the University of Engineering and Technology Peshawar.
This document is an assignment submission for a course on Advanced Mechanics. It contains the results of analyzing strains and displacements problems using Mohr's circle. The results are presented in two tables, with the first table containing strain components (εx, εy, γxy) for each problem and the second table containing the principal strains (ε1, ε2) and angle of principal planes (θp) for each problem. The assignment was submitted by Engr. Syeda Zunaira Ali to Engr. Iftikhar Ahmed of the Department of Civil Engineering at the University of Engineering and Technology Peshawar.
Submitted By: Engr. Syeda Zunaira Ali ,16PWCIV4569 Course: Advanced Mechanics Semester:2nd Masters in Structural Engineering Submitted to: Engr. Iftikhar Ahmed
Department of Civil Engineering
University of Engineering and Technology Peshawar 2.33c. 2.34c: 2.35c: 2.36c: 2.37 c: 2.38 c: 2.39 c:
Results obtained from Mohr’s circle for part a are: