Professional Documents
Culture Documents
2N5486 JFET VHF/UHF Amplifiers
2N5486 JFET VHF/UHF Amplifiers
Features
• Pb−Free Packages are Available* http://onsemi.com
1 DRAIN
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating Symbol Value Unit 3
Drain −Gate Voltage VDG 25 Vdc GATE
MARKING DIAGRAM
2N
5486
AYWWG
G
ORDERING INFORMATION
Device Package Shipping
2N5486 TO−92 1000 Units / Bulk
2N5486G TO−92 1000 Units / Bulk
(Pb−Free)
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
20 3.0
bis, INPUT SUSCEPTANCE (mmhos)
gis, INPUT CONDUCTANCE (mmhos)
2.0
10 bis @ IDSS
brs @ IDSS
7.0 1.0
5.0
0.7
0.25 IDSS
3.0 gis @ IDSS 0.5
2.0 0.3
gis @ 0.25 IDSS
0.2
1.0
0.7
0.1
0.5 grs @ IDSS, 0.25 IDSS
bis @ 0.25 IDSS 0.07
0.3 0.05
10 20 30 50 70 100 200 300 500 700 1000 10 20 30 50 70 100 200 300 500 700 1000
f, FREQUENCY (MHz) f, FREQUENCY (MHz)
Figure 1. Input Admittance (yis) Figure 2. Reverse Transfer Admittance (yrs)
gfs, FORWARD TRANSCONDUCTANCE (mmhos)
20 10
|b fs|, FORWARD SUSCEPTANCE (mmhos)
5.0
bos, OUTPUT SUSCEPTANCE (mhos)
gos, OUTPUT ADMITTANCE (mhos)
10
7.0 gfs @ IDSS 2.0 bos @ IDSS and 0.25 IDSS
5.0
1.0
3.0 gfs @ 0.25 IDSS
0.5
2.0
0.2 gos @ IDSS
1.0 |bfs| @ IDSS 0.1
0.7
0.5 0.05
|bfs| @ 0.25 IDSS
gos @ 0.25 IDSS
0.3 0.02
0.2 0.01
10 20 30 50 70 100 200 300 500 700 1000 10 20 30 50 70 100 200 300 500 700 1000
f, FREQUENCY (MHz) f, FREQUENCY (MHz)
Figure 3. Forward Transadmittance (yfs) Figure 4. Output Admittance (yos)
http://onsemi.com
2
2N5486
150° 160° 170° 180° 190° 200° 210° 150° 160° 170° 180° 190° 200° 210°
150° 160° 170° 180° 190° 200° 210° 150° 160° 170° 180° 190° 200° 210°
http://onsemi.com
3
2N5486
0.5
10
0.2 brg @ IDSS
7.0 gig @ IDSS
5.0
0.1
3.0 grg @ 0.25 IDSS 0.07
2.0 0.05
0.03 0.25 IDSS
1.0
0.02
0.7
0.5 big @ IDSS
big @ 0.25 IDSS 0.01 gig @ IDSS, 0.25 IDSS
0.3 0.007
0.2 0.005
10 20 30 50 70 100 200 300 500 700 1000 10 20 30 50 70 100 200 300 500 700 1000
f, FREQUENCY (MHz) f, FREQUENCY (MHz)
Figure 9. Input Admittance (yig) Figure 10. Reverse Transfer Admittance (yrg)
gfg , FORWARD TRANSCONDUCTANCE (mmhos)
10 1.0
bfg , FORWARD SUSCEPTANCE (mmhos)
gfg @ IDSS
bog, OUTPUT SUSCEPTANCE (mmhos)
5.0 0.5
3.0 gfg @ 0.25 IDSS 0.3
2.0 0.2
1.0 0.1
0.7 0.07
0.5 0.05 gog @ IDSS
bfg @ IDSS
0.3 0.03
0.2 brg @ 0.25 IDSS 0.02
gog @ 0.25 IDSS
0.1 0.01
10 20 30 50 70 100 200 300 500 700 1000 10 20 30 50 70 100 200 300 500 700 1000
f, FREQUENCY (MHz) f, FREQUENCY (MHz)
Figure 11. Forward Transfer Admittance (yfg) Figure 12. Output Admittance (yog)
http://onsemi.com
4
2N5486
30° 20° 10° 0° 350° 340° 330° 30° 20° 10° 0° 350° 340° 330°
150° 160° 170° 180° 190° 200° 210° 150° 160° 170° 180° 190° 200° 210°
0.3 0.8
60° 300° 60° 300°
0.2 0.7
70° ID = 0.25 IDSS 290° 70° 290°
150° 160° 170° 180° 190° 200° 210° 150° 160° 170° 180° 190° 200° 210°
http://onsemi.com
5
2N5486
PACKAGE DIMENSIONS
TO−92 (TO−226AA)
CASE 29−11
ISSUE AL
NOTES:
A B 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
P BEYOND DIMENSION K MINIMUM.
L
SEATING INCHES MILLIMETERS
PLANE K DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
D 0.016 0.021 0.407 0.533
X X D G 0.045 0.055 1.15 1.39
G H 0.095 0.105 2.42 2.66
J J 0.015 0.020 0.39 0.50
H K 0.500 −−− 12.70 −−−
V L 0.250 −−− 6.35 −−−
C N 0.080 0.105 2.04 2.66
SECTION X−X P −−− 0.100 −−− 2.54
1 R 0.115 −−− 2.93 −−−
N
V 0.135 −−− 3.43 −−−
N STYLE 5:
PIN 1. DRAIN
2. SOURCE
3. GATE
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com 2N5486/D
6